forked from Minki/linux
929e604efa
When the support for the Marvell crypto engine was added in the Device Tree of the various Armada 385 Device Tree files in commitd716f2e837("ARM: mvebu: define crypto SRAM ranges for all armada-38x boards"), a typo was made in the MBus window attributes for the Armada 385 Linksys board: 0x09/0x05 are used instead of 0x19/0x15. This commit fixes this typo, which makes the CESA engines operational on Armada 385 Linksys boards. Reported-by: Terry Stockert <stockert@inkblotadmirer.me> Cc: Terry Stockert <stockert@inkblotadmirer.me> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: <stable@vger.kernel.org> Fixes:d716f2e837("ARM: mvebu: define crypto SRAM ranges for all armada-38x boards") Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
335 lines
6.9 KiB
Plaintext
335 lines
6.9 KiB
Plaintext
/*
|
|
* Device Tree include file for Armada 385 based Linksys boards
|
|
*
|
|
* Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
|
|
*
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without
|
|
* any warranty of any kind, whether express or implied.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include "armada-385.dtsi"
|
|
|
|
/ {
|
|
model = "Linksys boards based on Armada 385";
|
|
compatible = "linksys,armada385", "marvell,armada385",
|
|
"marvell,armada380";
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x20000000>; /* 512 MB */
|
|
};
|
|
|
|
soc {
|
|
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
|
|
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
|
|
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
|
|
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
|
|
|
|
internal-regs {
|
|
|
|
spi@10600 {
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@11000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
status = "okay";
|
|
|
|
tmp421@4c {
|
|
compatible = "ti,tmp421";
|
|
reg = <0x4c>;
|
|
};
|
|
|
|
pca9635@68 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "nxp,pca9635";
|
|
reg = <0x68>;
|
|
};
|
|
};
|
|
|
|
/* J10: VCC, NC, RX, NC, TX, GND */
|
|
serial@12000 {
|
|
status = "okay";
|
|
};
|
|
|
|
ethernet@70000 {
|
|
status = "okay";
|
|
phy-mode = "rgmii-id";
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
ethernet@34000 {
|
|
status = "okay";
|
|
phy-mode = "sgmii";
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
mdio {
|
|
status = "okay";
|
|
};
|
|
|
|
sata@a8000 {
|
|
status = "okay";
|
|
};
|
|
|
|
/* USB part of the eSATA/USB 2.0 port */
|
|
usb@58000 {
|
|
status = "okay";
|
|
};
|
|
|
|
usb3@f8000 {
|
|
status = "okay";
|
|
usb-phy = <&usb3_phy>;
|
|
};
|
|
|
|
flash@d0000 {
|
|
status = "okay";
|
|
num-cs = <1>;
|
|
marvell,nand-keep-config;
|
|
marvell,nand-enable-arbiter;
|
|
nand-on-flash-bbt;
|
|
|
|
partition@0 {
|
|
label = "u-boot";
|
|
reg = <0x0000000 0x200000>; /* 2MB */
|
|
read-only;
|
|
};
|
|
|
|
partition@100000 {
|
|
label = "u_env";
|
|
reg = <0x200000 0x40000>; /* 256KB */
|
|
};
|
|
|
|
partition@140000 {
|
|
label = "s_env";
|
|
reg = <0x240000 0x40000>; /* 256KB */
|
|
};
|
|
|
|
partition@900000 {
|
|
label = "devinfo";
|
|
reg = <0x900000 0x100000>; /* 1MB */
|
|
read-only;
|
|
};
|
|
|
|
/* kernel1 overlaps with rootfs1 by design */
|
|
partition@a00000 {
|
|
label = "kernel1";
|
|
reg = <0xa00000 0x2800000>; /* 40MB */
|
|
};
|
|
|
|
partition@1000000 {
|
|
label = "rootfs1";
|
|
reg = <0x1000000 0x2200000>; /* 34MB */
|
|
};
|
|
|
|
/* kernel2 overlaps with rootfs2 by design */
|
|
partition@3200000 {
|
|
label = "kernel2";
|
|
reg = <0x3200000 0x2800000>; /* 40MB */
|
|
};
|
|
|
|
partition@3800000 {
|
|
label = "rootfs2";
|
|
reg = <0x3800000 0x2200000>; /* 34MB */
|
|
};
|
|
|
|
/*
|
|
* 38MB, last MB is for the BBT, not writable
|
|
*/
|
|
partition@5a00000 {
|
|
label = "syscfg";
|
|
reg = <0x5a00000 0x2600000>;
|
|
};
|
|
|
|
/*
|
|
* Unused area between "s_env" and "devinfo".
|
|
* Moved here because otherwise the renumbered
|
|
* partitions would break the bootloader
|
|
* supplied bootargs
|
|
*/
|
|
partition@180000 {
|
|
label = "unused_area";
|
|
reg = <0x280000 0x680000>; /* 6.5MB */
|
|
};
|
|
};
|
|
};
|
|
|
|
pcie-controller {
|
|
status = "okay";
|
|
|
|
pcie@1,0 {
|
|
/* Marvell 88W8864, 5GHz-only */
|
|
status = "okay";
|
|
};
|
|
|
|
pcie@2,0 {
|
|
/* Marvell 88W8864, 2GHz-only */
|
|
status = "okay";
|
|
};
|
|
};
|
|
};
|
|
|
|
usb3_phy: usb3_phy {
|
|
compatible = "usb-nop-xceiv";
|
|
vcc-supply = <®_xhci0_vbus>;
|
|
};
|
|
|
|
reg_xhci0_vbus: xhci0-vbus {
|
|
compatible = "regulator-fixed";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&xhci0_vbus_pins>;
|
|
regulator-name = "xhci0-vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-0 = <&keys_pin>;
|
|
pinctrl-names = "default";
|
|
|
|
button@1 {
|
|
label = "WPS";
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
button@2 {
|
|
label = "Factory Reset Button";
|
|
linux,code = <KEY_RESTART>;
|
|
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
gpio-leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-0 = <&power_led_pin &sata_led_pin>;
|
|
pinctrl-names = "default";
|
|
|
|
power {
|
|
gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
|
|
default-state = "on";
|
|
};
|
|
|
|
sata {
|
|
gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
|
|
default-state = "off";
|
|
};
|
|
};
|
|
|
|
dsa@0 {
|
|
compatible = "marvell,dsa";
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
|
|
dsa,ethernet = <ð2>;
|
|
dsa,mii-bus = <&mdio>;
|
|
|
|
switch@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0>; /* MDIO address 0, switch 0 in tree */
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
label = "lan4";
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
label = "lan3";
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
label = "lan2";
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
label = "lan1";
|
|
};
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
label = "wan";
|
|
};
|
|
|
|
port@5 {
|
|
reg = <5>;
|
|
label = "cpu";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pinctrl {
|
|
keys_pin: keys-pin {
|
|
marvell,pins = "mpp24", "mpp29";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
power_led_pin: power-led-pin {
|
|
marvell,pins = "mpp55";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
sata_led_pin: sata-led-pin {
|
|
marvell,pins = "mpp54";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
xhci0_vbus_pins: xhci0-vbus-pins {
|
|
marvell,pins = "mpp50";
|
|
marvell,function = "gpio";
|
|
};
|
|
};
|