linux/drivers/usb/phy/phy-generic.c
Greg Kroah-Hartman 8152263748 usb: patches for v4.9 merge window
This time around we have 92 non-merge commits. Most
 of the changes are in drivers/usb/gadget (40.3%)
 with drivers/usb/gadget/function being the most
 active directory (27.2%).
 
 As for UDC drivers, only dwc3 (26.5%) and dwc2
 (12.7%) have really been active.
 
 The most important changes for dwc3 are better
 support for scatterlist and, again, throughput
 improvements. While on dwc2 got some minor stability
 fixes related to soft reset and FIFO usage.
 
 Felipe Tonello has done some good work fixing up our
 f_midi gadget and Tal Shorer has implemented a nice
 API change for our ULPI bus.
 
 Apart from these, we have our usual set of
 non-critical fixes, spelling fixes, build warning
 fixes, etc.
 -----BEGIN PGP SIGNATURE-----
 
 iQI6BAABCAAkBQJX2TpXHRxmZWxpcGUuYmFsYmlAbGludXguaW50ZWwuY29tAAoJ
 EMy+uJnhGpkGxX0QAIOavB96wkAP4msMzCMIKyKX8NBVWEYzLy7Ou6IrPKiGOR28
 CjDi1C5qW7838H4neA6Gfw896rfTiAODhoiOY/RTXI7p2hTUUXHQuJ81Bad75gHD
 744BUMPy37YJnvgHTasYn0GxAvP73YmV+omRxo76poetYZ9eH8dGECvC9q6m+jRU
 XaubWEq1JMvzHvlyO7BIrndGY4ByRbBoG0XPiZF07e5YDkKWQmv56tgAAN7fEkeh
 8HIg8lG2xvgf+w6cDbrQ2c8fp055OvrOq40R2pSXwQgYYKXPJ+vFiNzriQ6Rfxai
 gIYrB+mrKZcY6mi6OhoulGfNxT65VqMqnUfwVbbwlJQbDe5EkV6o/1WYdaBvdO2s
 qTT9A5alabFzbQ8ZtjzsIHtV62LwmZlMWk7gxZlcvLFNjf/P2CMqqnJi30/JlrsE
 iqhwIGRDhMq4QZZbiiEiJEaEn6vh2zseRdmCy3uMFearXKBP/I2177QOTDG7ZMKf
 fZR4ROlv6c5tIpBCOsTV0+7c/fnnnOTHU4+vJiUzU0krkPzaLcL8iMT1tn+uGchX
 4d2XLuT6AbVxQR4N8YF4FwRzB/PbEb+ZWWGu1mOVSd9/dsA43K50zNdc061dgz8K
 q8lau6bmtfUXdbeWa3WMEaAZIuSBmFarJY0tPZV6W7cXUAgKitThRD6fp4E0
 =vTFa
 -----END PGP SIGNATURE-----

Merge tag 'usb-for-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v4.9 merge window

This time around we have 92 non-merge commits. Most
of the changes are in drivers/usb/gadget (40.3%)
with drivers/usb/gadget/function being the most
active directory (27.2%).

As for UDC drivers, only dwc3 (26.5%) and dwc2
(12.7%) have really been active.

The most important changes for dwc3 are better
support for scatterlist and, again, throughput
improvements. While on dwc2 got some minor stability
fixes related to soft reset and FIFO usage.

Felipe Tonello has done some good work fixing up our
f_midi gadget and Tal Shorer has implemented a nice
API change for our ULPI bus.

Apart from these, we have our usual set of
non-critical fixes, spelling fixes, build warning
fixes, etc.
2016-09-14 20:37:50 +02:00

386 lines
8.9 KiB
C

/*
* NOP USB transceiver for all USB transceiver which are either built-in
* into USB IP or which are mostly autonomous.
*
* Copyright (C) 2009 Texas Instruments Inc
* Author: Ajay Kumar Gupta <ajay.gupta@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Current status:
* This provides a "nop" transceiver for PHYs which are
* autonomous such as isp1504, isp1707, etc.
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/usb/gadget.h>
#include <linux/usb/otg.h>
#include <linux/usb/usb_phy_generic.h>
#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/regulator/consumer.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include "phy-generic.h"
#define VBUS_IRQ_FLAGS \
(IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | \
IRQF_ONESHOT)
struct platform_device *usb_phy_generic_register(void)
{
return platform_device_register_simple("usb_phy_generic",
PLATFORM_DEVID_AUTO, NULL, 0);
}
EXPORT_SYMBOL_GPL(usb_phy_generic_register);
void usb_phy_generic_unregister(struct platform_device *pdev)
{
platform_device_unregister(pdev);
}
EXPORT_SYMBOL_GPL(usb_phy_generic_unregister);
static int nop_set_suspend(struct usb_phy *x, int suspend)
{
return 0;
}
static void nop_reset(struct usb_phy_generic *nop)
{
if (!nop->gpiod_reset)
return;
gpiod_set_value(nop->gpiod_reset, 1);
usleep_range(10000, 20000);
gpiod_set_value(nop->gpiod_reset, 0);
}
/* interface to regulator framework */
static void nop_set_vbus_draw(struct usb_phy_generic *nop, unsigned mA)
{
struct regulator *vbus_draw = nop->vbus_draw;
int enabled;
int ret;
if (!vbus_draw)
return;
enabled = nop->vbus_draw_enabled;
if (mA) {
regulator_set_current_limit(vbus_draw, 0, 1000 * mA);
if (!enabled) {
ret = regulator_enable(vbus_draw);
if (ret < 0)
return;
nop->vbus_draw_enabled = 1;
}
} else {
if (enabled) {
ret = regulator_disable(vbus_draw);
if (ret < 0)
return;
nop->vbus_draw_enabled = 0;
}
}
nop->mA = mA;
}
static irqreturn_t nop_gpio_vbus_thread(int irq, void *data)
{
struct usb_phy_generic *nop = data;
struct usb_otg *otg = nop->phy.otg;
int vbus, status;
vbus = gpiod_get_value(nop->gpiod_vbus);
if ((vbus ^ nop->vbus) == 0)
return IRQ_HANDLED;
nop->vbus = vbus;
if (vbus) {
status = USB_EVENT_VBUS;
otg->state = OTG_STATE_B_PERIPHERAL;
nop->phy.last_event = status;
/* drawing a "unit load" is *always* OK, except for OTG */
nop_set_vbus_draw(nop, 100);
atomic_notifier_call_chain(&nop->phy.notifier, status,
otg->gadget);
} else {
nop_set_vbus_draw(nop, 0);
status = USB_EVENT_NONE;
otg->state = OTG_STATE_B_IDLE;
nop->phy.last_event = status;
atomic_notifier_call_chain(&nop->phy.notifier, status,
otg->gadget);
}
return IRQ_HANDLED;
}
int usb_gen_phy_init(struct usb_phy *phy)
{
struct usb_phy_generic *nop = dev_get_drvdata(phy->dev);
int ret;
if (!IS_ERR(nop->vcc)) {
if (regulator_enable(nop->vcc))
dev_err(phy->dev, "Failed to enable power\n");
}
if (!IS_ERR(nop->clk)) {
ret = clk_prepare_enable(nop->clk);
if (ret)
return ret;
}
nop_reset(nop);
return 0;
}
EXPORT_SYMBOL_GPL(usb_gen_phy_init);
void usb_gen_phy_shutdown(struct usb_phy *phy)
{
struct usb_phy_generic *nop = dev_get_drvdata(phy->dev);
gpiod_set_value(nop->gpiod_reset, 1);
if (!IS_ERR(nop->clk))
clk_disable_unprepare(nop->clk);
if (!IS_ERR(nop->vcc)) {
if (regulator_disable(nop->vcc))
dev_err(phy->dev, "Failed to disable power\n");
}
}
EXPORT_SYMBOL_GPL(usb_gen_phy_shutdown);
static int nop_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget)
{
if (!otg)
return -ENODEV;
if (!gadget) {
otg->gadget = NULL;
return -ENODEV;
}
otg->gadget = gadget;
if (otg->state == OTG_STATE_B_PERIPHERAL)
atomic_notifier_call_chain(&otg->usb_phy->notifier,
USB_EVENT_VBUS, otg->gadget);
else
otg->state = OTG_STATE_B_IDLE;
return 0;
}
static int nop_set_host(struct usb_otg *otg, struct usb_bus *host)
{
if (!otg)
return -ENODEV;
if (!host) {
otg->host = NULL;
return -ENODEV;
}
otg->host = host;
return 0;
}
int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
struct usb_phy_generic_platform_data *pdata)
{
enum usb_phy_type type = USB_PHY_TYPE_USB2;
int err = 0;
u32 clk_rate = 0;
bool needs_vcc = false;
if (dev->of_node) {
struct device_node *node = dev->of_node;
if (of_property_read_u32(node, "clock-frequency", &clk_rate))
clk_rate = 0;
needs_vcc = of_property_read_bool(node, "vcc-supply");
nop->gpiod_reset = devm_gpiod_get_optional(dev, "reset",
GPIOD_ASIS);
err = PTR_ERR_OR_ZERO(nop->gpiod_reset);
if (!err) {
nop->gpiod_vbus = devm_gpiod_get_optional(dev,
"vbus-detect",
GPIOD_ASIS);
err = PTR_ERR_OR_ZERO(nop->gpiod_vbus);
}
} else if (pdata) {
type = pdata->type;
clk_rate = pdata->clk_rate;
needs_vcc = pdata->needs_vcc;
if (gpio_is_valid(pdata->gpio_reset)) {
err = devm_gpio_request_one(dev, pdata->gpio_reset,
GPIOF_ACTIVE_LOW,
dev_name(dev));
if (!err)
nop->gpiod_reset =
gpio_to_desc(pdata->gpio_reset);
}
nop->gpiod_vbus = pdata->gpiod_vbus;
}
if (err == -EPROBE_DEFER)
return -EPROBE_DEFER;
if (err) {
dev_err(dev, "Error requesting RESET or VBUS GPIO\n");
return err;
}
if (nop->gpiod_reset)
gpiod_direction_output(nop->gpiod_reset, 1);
nop->phy.otg = devm_kzalloc(dev, sizeof(*nop->phy.otg),
GFP_KERNEL);
if (!nop->phy.otg)
return -ENOMEM;
nop->clk = devm_clk_get(dev, "main_clk");
if (IS_ERR(nop->clk)) {
dev_dbg(dev, "Can't get phy clock: %ld\n",
PTR_ERR(nop->clk));
}
if (!IS_ERR(nop->clk) && clk_rate) {
err = clk_set_rate(nop->clk, clk_rate);
if (err) {
dev_err(dev, "Error setting clock rate\n");
return err;
}
}
nop->vcc = devm_regulator_get(dev, "vcc");
if (IS_ERR(nop->vcc)) {
dev_dbg(dev, "Error getting vcc regulator: %ld\n",
PTR_ERR(nop->vcc));
if (needs_vcc)
return -EPROBE_DEFER;
}
nop->dev = dev;
nop->phy.dev = nop->dev;
nop->phy.label = "nop-xceiv";
nop->phy.set_suspend = nop_set_suspend;
nop->phy.type = type;
nop->phy.otg->state = OTG_STATE_UNDEFINED;
nop->phy.otg->usb_phy = &nop->phy;
nop->phy.otg->set_host = nop_set_host;
nop->phy.otg->set_peripheral = nop_set_peripheral;
return 0;
}
EXPORT_SYMBOL_GPL(usb_phy_gen_create_phy);
static int usb_phy_generic_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct usb_phy_generic *nop;
int err;
nop = devm_kzalloc(dev, sizeof(*nop), GFP_KERNEL);
if (!nop)
return -ENOMEM;
err = usb_phy_gen_create_phy(dev, nop, dev_get_platdata(&pdev->dev));
if (err)
return err;
if (nop->gpiod_vbus) {
err = devm_request_threaded_irq(&pdev->dev,
gpiod_to_irq(nop->gpiod_vbus),
NULL, nop_gpio_vbus_thread,
VBUS_IRQ_FLAGS, "vbus_detect",
nop);
if (err) {
dev_err(&pdev->dev, "can't request irq %i, err: %d\n",
gpiod_to_irq(nop->gpiod_vbus), err);
return err;
}
nop->phy.otg->state = gpiod_get_value(nop->gpiod_vbus) ?
OTG_STATE_B_PERIPHERAL : OTG_STATE_B_IDLE;
}
nop->phy.init = usb_gen_phy_init;
nop->phy.shutdown = usb_gen_phy_shutdown;
err = usb_add_phy_dev(&nop->phy);
if (err) {
dev_err(&pdev->dev, "can't register transceiver, err: %d\n",
err);
return err;
}
platform_set_drvdata(pdev, nop);
return 0;
}
static int usb_phy_generic_remove(struct platform_device *pdev)
{
struct usb_phy_generic *nop = platform_get_drvdata(pdev);
usb_remove_phy(&nop->phy);
return 0;
}
static const struct of_device_id nop_xceiv_dt_ids[] = {
{ .compatible = "usb-nop-xceiv" },
{ }
};
MODULE_DEVICE_TABLE(of, nop_xceiv_dt_ids);
static struct platform_driver usb_phy_generic_driver = {
.probe = usb_phy_generic_probe,
.remove = usb_phy_generic_remove,
.driver = {
.name = "usb_phy_generic",
.of_match_table = nop_xceiv_dt_ids,
},
};
static int __init usb_phy_generic_init(void)
{
return platform_driver_register(&usb_phy_generic_driver);
}
subsys_initcall(usb_phy_generic_init);
static void __exit usb_phy_generic_exit(void)
{
platform_driver_unregister(&usb_phy_generic_driver);
}
module_exit(usb_phy_generic_exit);
MODULE_ALIAS("platform:usb_phy_generic");
MODULE_AUTHOR("Texas Instruments Inc");
MODULE_DESCRIPTION("NOP USB Transceiver driver");
MODULE_LICENSE("GPL");