Bruce Allan 11b08be830 e1000e: bad state after running ethtool diagnostics with AMT enabled ... When running ethtool online diagnostics with no open interface, there is a short period of time where the driver relinquishes control of the adapter during which time AMT (manageability firmware) can put the adapter into an unknown state resulting in such things as link test failure, hardware hang, reporting an incorrect link speed, etc. Resetting the adapter during an open() resolves this by putting the adapter into a quiescent state. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>		2010-05-12 23:31:09 -07:00
..
82571.c	e1000e: increase rx fifo size to 36K on 82574 and 82583	2010-05-05 21:15:31 -07:00
defines.h	e1000e: reset MAC-PHY interconnect on 82577/82578 during Sx->S0	2010-05-06 01:31:28 -07:00
e1000.h	e1000e: save skb counts in TX to avoid cache misses	2010-05-05 21:11:25 -07:00
es2lan.c	e1000e: provide MAC-family-specific function to set LAN ID	2010-01-13 20:31:57 -08:00
ethtool.c	e1000e: bad state after running ethtool diagnostics with AMT enabled	2010-05-12 23:31:09 -07:00
hw.h	e1000e: genericize the update multicast address list	2010-01-13 20:31:57 -08:00
ich8lan.c	e1000e: Reset 82577/82578 PHY before first PHY register read	2010-05-06 01:31:28 -07:00
lib.c	e1000e: typo corrections	2010-03-30 23:02:27 -07:00
Makefile	e1000e: reformat comment blocks, cosmetic changes only	2008-03-28 22:14:56 -04:00
netdev.c	e1000e: bad state after running ethtool diagnostics with AMT enabled	2010-05-12 23:31:09 -07:00
param.c	e1000e: use static params to save stack space (part 2)	2010-05-12 23:31:09 -07:00
phy.c	e1000e: MDIO slow mode should always be done for 82577	2010-01-13 17:12:46 -08:00