forked from Minki/linux
2bd8040174
Core changes
- Return NULL from gpiod_get_optional() when GPIOLIB is disabled.
This was a much discussed change. It affects use cases where people
write drivers that might or might not be using GPIO resources.
I have decided that this is the lesser evil right now.
- Make gpiod_count() behave consistently across different hardware
descriptions.
- Fix the syntax around open drain/open source to not infer active
high/low semantics.
New drivers
- A new single-register fixed-direction framework driver for hardware
that have lines controlled by a single register that just work in
one direction (out or in), including IRQ support.
- Support the Fintek F71889A GPIO SuperIO controller.
- Support the National NI 169445 MMIO GPIO.
- Support for the X-Gene derivative of the DWC GPIO controller
- Support for the Rohm BD9571MWV-M PMIC GPIO controller.
- Refactor the Gemini GPIO driver to a generic Faraday FTGPIO driver
and replace both the Gemini and the Moxa ART custom drivers with
this driver.
Driver improvements
- A whole slew of drivers have their spinlocks chaned to raw spinlocks
as they provide irqchips, and thus we are progressing on realtime
compliance.
- Use devm_irq_alloc_descs() in a slew of drivers, getting managed
resources.
- Support for the embedded PWM controller inside the MVEBU driver.
- Debounce, open source and open drain support for the Aspeed driver.
- Misc smaller fixes like spelling and syntax and whatnot.
-----BEGIN PGP SIGNATURE-----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=DGPb
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v4.12 kernel cycle.
Core changes:
- Return NULL from gpiod_get_optional() when GPIOLIB is disabled.
This was a much discussed change. It affects use cases where people
write drivers that might or might not be using GPIO resources. I
have decided that this is the lesser evil right now.
- Make gpiod_count() behave consistently across different hardware
descriptions.
- Fix the syntax around open drain/open source to not infer active
high/low semantics.
New drivers:
- A new single-register fixed-direction framework driver for hardware
that have lines controlled by a single register that just work in
one direction (out or in), including IRQ support.
- Support the Fintek F71889A GPIO SuperIO controller.
- Support the National NI 169445 MMIO GPIO.
- Support for the X-Gene derivative of the DWC GPIO controller
- Support for the Rohm BD9571MWV-M PMIC GPIO controller.
- Refactor the Gemini GPIO driver to a generic Faraday FTGPIO driver
and replace both the Gemini and the Moxa ART custom drivers with
this driver.
Driver improvements:
- A whole slew of drivers have their spinlocks chaned to raw
spinlocks as they provide irqchips, and thus we are progressing on
realtime compliance.
- Use devm_irq_alloc_descs() in a slew of drivers, getting managed
resources.
- Support for the embedded PWM controller inside the MVEBU driver.
- Debounce, open source and open drain support for the Aspeed driver.
- Misc smaller fixes like spelling and syntax and whatnot"
* tag 'gpio-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits)
gpio: f7188x: Add a missing break
gpio: omap: return error if requested debounce time is not possible
gpio: Add ROHM BD9571MWV-M PMIC GPIO driver
gpio: gpio-wcove: fix GPIO IRQ status mask
gpio: DT bindings, move tca9554 from pcf857x to pca953x
gpio: move tca9554 from pcf857x to pca953x
gpio: arizona: Correct check whether the pin is an input
gpio: Add XRA1403 DTS binding documentation
dt-bindings: add exar to vendor prefixes list
gpio: gpio-wcove: fix irq pending status bit width
gpio: dwapb: use dwapb_read instead of readl_relaxed
gpio: aspeed: Add open-source and open-drain support
gpio: aspeed: Add debounce support
gpio: aspeed: dt: Add optional clocks property
gpio: aspeed: dt: Fix description alignment in bindings document
gpio: mvebu: Add limited PWM support
gpio: Use unsigned int for interrupt numbers
gpio: f7188x: Add F71889A GPIO support.
gpio: core: Decouple open drain/source flag with active low/high
gpio: arizona: Correct handling for reading input GPIOs
...
|
||
|---|---|---|
| .. | ||
| 88pm80x_onkey.c | ||
| 88pm860x_onkey.c | ||
| ab8500-ponkey.c | ||
| ad714x-i2c.c | ||
| ad714x-spi.c | ||
| ad714x.c | ||
| ad714x.h | ||
| adxl34x-i2c.c | ||
| adxl34x-spi.c | ||
| adxl34x.c | ||
| adxl34x.h | ||
| apanel.c | ||
| arizona-haptics.c | ||
| ati_remote2.c | ||
| atlas_btns.c | ||
| atmel_captouch.c | ||
| axp20x-pek.c | ||
| bfin_rotary.c | ||
| bma150.c | ||
| cm109.c | ||
| cma3000_d0x_i2c.c | ||
| cma3000_d0x.c | ||
| cma3000_d0x.h | ||
| cobalt_btns.c | ||
| cpcap-pwrbutton.c | ||
| da9052_onkey.c | ||
| da9055_onkey.c | ||
| da9063_onkey.c | ||
| dm355evm_keys.c | ||
| drv260x.c | ||
| drv2665.c | ||
| drv2667.c | ||
| e3x0-button.c | ||
| gp2ap002a00f.c | ||
| gpio_decoder.c | ||
| gpio_tilt_polled.c | ||
| gpio-beeper.c | ||
| hisi_powerkey.c | ||
| hp_sdc_rtc.c | ||
| ideapad_slidebar.c | ||
| ims-pcu.c | ||
| ixp4xx-beeper.c | ||
| Kconfig | ||
| keyspan_remote.c | ||
| kxtj9.c | ||
| m68kspkr.c | ||
| Makefile | ||
| max8925_onkey.c | ||
| max8997_haptic.c | ||
| max77693-haptic.c | ||
| mc13783-pwrbutton.c | ||
| mma8450.c | ||
| palmas-pwrbutton.c | ||
| pcap_keys.c | ||
| pcf8574_keypad.c | ||
| pcf50633-input.c | ||
| pcspkr.c | ||
| pm8xxx-vibrator.c | ||
| pm8941-pwrkey.c | ||
| pmic8xxx-pwrkey.c | ||
| powermate.c | ||
| pwm-beeper.c | ||
| rb532_button.c | ||
| regulator-haptic.c | ||
| retu-pwrbutton.c | ||
| rotary_encoder.c | ||
| sgi_btns.c | ||
| sirfsoc-onkey.c | ||
| soc_button_array.c | ||
| sparcspkr.c | ||
| tps65218-pwrbutton.c | ||
| twl4030-pwrbutton.c | ||
| twl4030-vibra.c | ||
| twl6040-vibra.c | ||
| uinput.c | ||
| wistron_btns.c | ||
| wm831x-on.c | ||
| xen-kbdfront.c | ||
| yealink.c | ||
| yealink.h | ||