forked from Minki/linux
cd354f1ae7
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
425 lines
9.0 KiB
C
425 lines
9.0 KiB
C
/*
|
|
* bt856 - BT856A Digital Video Encoder (Rockwell Part)
|
|
*
|
|
* Copyright (C) 1999 Mike Bernson <mike@mlb.org>
|
|
* Copyright (C) 1998 Dave Perks <dperks@ibm.net>
|
|
*
|
|
* Modifications for LML33/DC10plus unified driver
|
|
* Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
|
|
*
|
|
* This code was modify/ported from the saa7111 driver written
|
|
* by Dave Perks.
|
|
*
|
|
* Changes by Ronald Bultje <rbultje@ronald.bitfreak.net>
|
|
* - moved over to linux>=2.4.x i2c protocol (9/9/2002)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/major.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/signal.h>
|
|
#include <asm/io.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/page.h>
|
|
#include <linux/types.h>
|
|
|
|
#include <linux/videodev.h>
|
|
#include <asm/uaccess.h>
|
|
|
|
MODULE_DESCRIPTION("Brooktree-856A video encoder driver");
|
|
MODULE_AUTHOR("Mike Bernson & Dave Perks");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
#include <linux/i2c.h>
|
|
|
|
#define I2C_NAME(s) (s)->name
|
|
|
|
#include <linux/video_encoder.h>
|
|
|
|
static int debug = 0;
|
|
module_param(debug, int, 0);
|
|
MODULE_PARM_DESC(debug, "Debug level (0-1)");
|
|
|
|
#define dprintk(num, format, args...) \
|
|
do { \
|
|
if (debug >= num) \
|
|
printk(format, ##args); \
|
|
} while (0)
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
#define REG_OFFSET 0xDA
|
|
#define BT856_NR_REG 6
|
|
|
|
struct bt856 {
|
|
unsigned char reg[BT856_NR_REG];
|
|
|
|
int norm;
|
|
int enable;
|
|
};
|
|
|
|
#define I2C_BT856 0x88
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static inline int
|
|
bt856_write (struct i2c_client *client,
|
|
u8 reg,
|
|
u8 value)
|
|
{
|
|
struct bt856 *encoder = i2c_get_clientdata(client);
|
|
|
|
encoder->reg[reg - REG_OFFSET] = value;
|
|
return i2c_smbus_write_byte_data(client, reg, value);
|
|
}
|
|
|
|
static inline int
|
|
bt856_setbit (struct i2c_client *client,
|
|
u8 reg,
|
|
u8 bit,
|
|
u8 value)
|
|
{
|
|
struct bt856 *encoder = i2c_get_clientdata(client);
|
|
|
|
return bt856_write(client, reg,
|
|
(encoder->
|
|
reg[reg - REG_OFFSET] & ~(1 << bit)) |
|
|
(value ? (1 << bit) : 0));
|
|
}
|
|
|
|
static void
|
|
bt856_dump (struct i2c_client *client)
|
|
{
|
|
int i;
|
|
struct bt856 *encoder = i2c_get_clientdata(client);
|
|
|
|
printk(KERN_INFO "%s: register dump:", I2C_NAME(client));
|
|
for (i = 0; i < BT856_NR_REG; i += 2)
|
|
printk(" %02x", encoder->reg[i]);
|
|
printk("\n");
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static int
|
|
bt856_command (struct i2c_client *client,
|
|
unsigned int cmd,
|
|
void *arg)
|
|
{
|
|
struct bt856 *encoder = i2c_get_clientdata(client);
|
|
|
|
switch (cmd) {
|
|
|
|
case 0:
|
|
/* This is just for testing!!! */
|
|
dprintk(1, KERN_INFO "bt856: init\n");
|
|
bt856_write(client, 0xdc, 0x18);
|
|
bt856_write(client, 0xda, 0);
|
|
bt856_write(client, 0xde, 0);
|
|
|
|
bt856_setbit(client, 0xdc, 3, 1);
|
|
//bt856_setbit(client, 0xdc, 6, 0);
|
|
bt856_setbit(client, 0xdc, 4, 1);
|
|
|
|
switch (encoder->norm) {
|
|
|
|
case VIDEO_MODE_NTSC:
|
|
bt856_setbit(client, 0xdc, 2, 0);
|
|
break;
|
|
|
|
case VIDEO_MODE_PAL:
|
|
bt856_setbit(client, 0xdc, 2, 1);
|
|
break;
|
|
}
|
|
|
|
bt856_setbit(client, 0xdc, 1, 1);
|
|
bt856_setbit(client, 0xde, 4, 0);
|
|
bt856_setbit(client, 0xde, 3, 1);
|
|
if (debug != 0)
|
|
bt856_dump(client);
|
|
break;
|
|
|
|
case ENCODER_GET_CAPABILITIES:
|
|
{
|
|
struct video_encoder_capability *cap = arg;
|
|
|
|
dprintk(1, KERN_INFO "%s: get capabilities\n",
|
|
I2C_NAME(client));
|
|
|
|
cap->flags = VIDEO_ENCODER_PAL |
|
|
VIDEO_ENCODER_NTSC |
|
|
VIDEO_ENCODER_CCIR;
|
|
cap->inputs = 2;
|
|
cap->outputs = 1;
|
|
}
|
|
break;
|
|
|
|
case ENCODER_SET_NORM:
|
|
{
|
|
int *iarg = arg;
|
|
|
|
dprintk(1, KERN_INFO "%s: set norm %d\n", I2C_NAME(client),
|
|
*iarg);
|
|
|
|
switch (*iarg) {
|
|
|
|
case VIDEO_MODE_NTSC:
|
|
bt856_setbit(client, 0xdc, 2, 0);
|
|
break;
|
|
|
|
case VIDEO_MODE_PAL:
|
|
bt856_setbit(client, 0xdc, 2, 1);
|
|
bt856_setbit(client, 0xda, 0, 0);
|
|
//bt856_setbit(client, 0xda, 0, 1);
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
|
|
}
|
|
encoder->norm = *iarg;
|
|
if (debug != 0)
|
|
bt856_dump(client);
|
|
}
|
|
break;
|
|
|
|
case ENCODER_SET_INPUT:
|
|
{
|
|
int *iarg = arg;
|
|
|
|
dprintk(1, KERN_INFO "%s: set input %d\n", I2C_NAME(client),
|
|
*iarg);
|
|
|
|
/* We only have video bus.
|
|
* iarg = 0: input is from bt819
|
|
* iarg = 1: input is from ZR36060 */
|
|
|
|
switch (*iarg) {
|
|
|
|
case 0:
|
|
bt856_setbit(client, 0xde, 4, 0);
|
|
bt856_setbit(client, 0xde, 3, 1);
|
|
bt856_setbit(client, 0xdc, 3, 1);
|
|
bt856_setbit(client, 0xdc, 6, 0);
|
|
break;
|
|
case 1:
|
|
bt856_setbit(client, 0xde, 4, 0);
|
|
bt856_setbit(client, 0xde, 3, 1);
|
|
bt856_setbit(client, 0xdc, 3, 1);
|
|
bt856_setbit(client, 0xdc, 6, 1);
|
|
break;
|
|
case 2: // Color bar
|
|
bt856_setbit(client, 0xdc, 3, 0);
|
|
bt856_setbit(client, 0xde, 4, 1);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
if (debug != 0)
|
|
bt856_dump(client);
|
|
}
|
|
break;
|
|
|
|
case ENCODER_SET_OUTPUT:
|
|
{
|
|
int *iarg = arg;
|
|
|
|
dprintk(1, KERN_INFO "%s: set output %d\n", I2C_NAME(client),
|
|
*iarg);
|
|
|
|
/* not much choice of outputs */
|
|
if (*iarg != 0) {
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
break;
|
|
|
|
case ENCODER_ENABLE_OUTPUT:
|
|
{
|
|
int *iarg = arg;
|
|
|
|
encoder->enable = !!*iarg;
|
|
|
|
dprintk(1, KERN_INFO "%s: enable output %d\n",
|
|
I2C_NAME(client), encoder->enable);
|
|
}
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* Generic i2c probe
|
|
* concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
|
|
*/
|
|
static unsigned short normal_i2c[] = { I2C_BT856 >> 1, I2C_CLIENT_END };
|
|
|
|
static unsigned short ignore = I2C_CLIENT_END;
|
|
|
|
static struct i2c_client_address_data addr_data = {
|
|
.normal_i2c = normal_i2c,
|
|
.probe = &ignore,
|
|
.ignore = &ignore,
|
|
};
|
|
|
|
static struct i2c_driver i2c_driver_bt856;
|
|
|
|
static int
|
|
bt856_detect_client (struct i2c_adapter *adapter,
|
|
int address,
|
|
int kind)
|
|
{
|
|
int i;
|
|
struct i2c_client *client;
|
|
struct bt856 *encoder;
|
|
|
|
dprintk(1,
|
|
KERN_INFO
|
|
"bt856.c: detecting bt856 client on address 0x%x\n",
|
|
address << 1);
|
|
|
|
/* Check if the adapter supports the needed features */
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
return 0;
|
|
|
|
client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
|
|
if (client == 0)
|
|
return -ENOMEM;
|
|
client->addr = address;
|
|
client->adapter = adapter;
|
|
client->driver = &i2c_driver_bt856;
|
|
strlcpy(I2C_NAME(client), "bt856", sizeof(I2C_NAME(client)));
|
|
|
|
encoder = kzalloc(sizeof(struct bt856), GFP_KERNEL);
|
|
if (encoder == NULL) {
|
|
kfree(client);
|
|
return -ENOMEM;
|
|
}
|
|
encoder->norm = VIDEO_MODE_NTSC;
|
|
encoder->enable = 1;
|
|
i2c_set_clientdata(client, encoder);
|
|
|
|
i = i2c_attach_client(client);
|
|
if (i) {
|
|
kfree(client);
|
|
kfree(encoder);
|
|
return i;
|
|
}
|
|
|
|
bt856_write(client, 0xdc, 0x18);
|
|
bt856_write(client, 0xda, 0);
|
|
bt856_write(client, 0xde, 0);
|
|
|
|
bt856_setbit(client, 0xdc, 3, 1);
|
|
//bt856_setbit(client, 0xdc, 6, 0);
|
|
bt856_setbit(client, 0xdc, 4, 1);
|
|
|
|
switch (encoder->norm) {
|
|
|
|
case VIDEO_MODE_NTSC:
|
|
bt856_setbit(client, 0xdc, 2, 0);
|
|
break;
|
|
|
|
case VIDEO_MODE_PAL:
|
|
bt856_setbit(client, 0xdc, 2, 1);
|
|
break;
|
|
}
|
|
|
|
bt856_setbit(client, 0xdc, 1, 1);
|
|
bt856_setbit(client, 0xde, 4, 0);
|
|
bt856_setbit(client, 0xde, 3, 1);
|
|
|
|
if (debug != 0)
|
|
bt856_dump(client);
|
|
|
|
dprintk(1, KERN_INFO "%s_attach: at address 0x%x\n", I2C_NAME(client),
|
|
client->addr << 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
bt856_attach_adapter (struct i2c_adapter *adapter)
|
|
{
|
|
dprintk(1,
|
|
KERN_INFO
|
|
"bt856.c: starting probe for adapter %s (0x%x)\n",
|
|
I2C_NAME(adapter), adapter->id);
|
|
return i2c_probe(adapter, &addr_data, &bt856_detect_client);
|
|
}
|
|
|
|
static int
|
|
bt856_detach_client (struct i2c_client *client)
|
|
{
|
|
struct bt856 *encoder = i2c_get_clientdata(client);
|
|
int err;
|
|
|
|
err = i2c_detach_client(client);
|
|
if (err) {
|
|
return err;
|
|
}
|
|
|
|
kfree(encoder);
|
|
kfree(client);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static struct i2c_driver i2c_driver_bt856 = {
|
|
.driver = {
|
|
.name = "bt856",
|
|
},
|
|
|
|
.id = I2C_DRIVERID_BT856,
|
|
|
|
.attach_adapter = bt856_attach_adapter,
|
|
.detach_client = bt856_detach_client,
|
|
.command = bt856_command,
|
|
};
|
|
|
|
static int __init
|
|
bt856_init (void)
|
|
{
|
|
return i2c_add_driver(&i2c_driver_bt856);
|
|
}
|
|
|
|
static void __exit
|
|
bt856_exit (void)
|
|
{
|
|
i2c_del_driver(&i2c_driver_bt856);
|
|
}
|
|
|
|
module_init(bt856_init);
|
|
module_exit(bt856_exit);
|