forked from Minki/linux
0f9887d11e
Use the macros for controls require custom get/put function. This is to make sure that the soc_mixer_control is used consistently among the drivers. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Arun KS <arunks@mistralsolutions.com> Cc: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
976 lines
25 KiB
C
976 lines
25 KiB
C
/*
|
|
* wm8580.c -- WM8580 ALSA Soc Audio driver
|
|
*
|
|
* Copyright 2008, 2009 Wolfson Microelectronics PLC.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* Notes:
|
|
* The WM8580 is a multichannel codec with S/PDIF support, featuring six
|
|
* DAC channels and two ADC channels.
|
|
*
|
|
* Currently only the primary audio interface is supported - S/PDIF and
|
|
* the secondary audio interfaces are not.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/of_device.h>
|
|
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/tlv.h>
|
|
#include <sound/initval.h>
|
|
#include <asm/div64.h>
|
|
|
|
#include "wm8580.h"
|
|
|
|
/* WM8580 register space */
|
|
#define WM8580_PLLA1 0x00
|
|
#define WM8580_PLLA2 0x01
|
|
#define WM8580_PLLA3 0x02
|
|
#define WM8580_PLLA4 0x03
|
|
#define WM8580_PLLB1 0x04
|
|
#define WM8580_PLLB2 0x05
|
|
#define WM8580_PLLB3 0x06
|
|
#define WM8580_PLLB4 0x07
|
|
#define WM8580_CLKSEL 0x08
|
|
#define WM8580_PAIF1 0x09
|
|
#define WM8580_PAIF2 0x0A
|
|
#define WM8580_SAIF1 0x0B
|
|
#define WM8580_PAIF3 0x0C
|
|
#define WM8580_PAIF4 0x0D
|
|
#define WM8580_SAIF2 0x0E
|
|
#define WM8580_DAC_CONTROL1 0x0F
|
|
#define WM8580_DAC_CONTROL2 0x10
|
|
#define WM8580_DAC_CONTROL3 0x11
|
|
#define WM8580_DAC_CONTROL4 0x12
|
|
#define WM8580_DAC_CONTROL5 0x13
|
|
#define WM8580_DIGITAL_ATTENUATION_DACL1 0x14
|
|
#define WM8580_DIGITAL_ATTENUATION_DACR1 0x15
|
|
#define WM8580_DIGITAL_ATTENUATION_DACL2 0x16
|
|
#define WM8580_DIGITAL_ATTENUATION_DACR2 0x17
|
|
#define WM8580_DIGITAL_ATTENUATION_DACL3 0x18
|
|
#define WM8580_DIGITAL_ATTENUATION_DACR3 0x19
|
|
#define WM8580_MASTER_DIGITAL_ATTENUATION 0x1C
|
|
#define WM8580_ADC_CONTROL1 0x1D
|
|
#define WM8580_SPDTXCHAN0 0x1E
|
|
#define WM8580_SPDTXCHAN1 0x1F
|
|
#define WM8580_SPDTXCHAN2 0x20
|
|
#define WM8580_SPDTXCHAN3 0x21
|
|
#define WM8580_SPDTXCHAN4 0x22
|
|
#define WM8580_SPDTXCHAN5 0x23
|
|
#define WM8580_SPDMODE 0x24
|
|
#define WM8580_INTMASK 0x25
|
|
#define WM8580_GPO1 0x26
|
|
#define WM8580_GPO2 0x27
|
|
#define WM8580_GPO3 0x28
|
|
#define WM8580_GPO4 0x29
|
|
#define WM8580_GPO5 0x2A
|
|
#define WM8580_INTSTAT 0x2B
|
|
#define WM8580_SPDRXCHAN1 0x2C
|
|
#define WM8580_SPDRXCHAN2 0x2D
|
|
#define WM8580_SPDRXCHAN3 0x2E
|
|
#define WM8580_SPDRXCHAN4 0x2F
|
|
#define WM8580_SPDRXCHAN5 0x30
|
|
#define WM8580_SPDSTAT 0x31
|
|
#define WM8580_PWRDN1 0x32
|
|
#define WM8580_PWRDN2 0x33
|
|
#define WM8580_READBACK 0x34
|
|
#define WM8580_RESET 0x35
|
|
|
|
#define WM8580_MAX_REGISTER 0x35
|
|
|
|
#define WM8580_DACOSR 0x40
|
|
|
|
/* PLLB4 (register 7h) */
|
|
#define WM8580_PLLB4_MCLKOUTSRC_MASK 0x60
|
|
#define WM8580_PLLB4_MCLKOUTSRC_PLLA 0x20
|
|
#define WM8580_PLLB4_MCLKOUTSRC_PLLB 0x40
|
|
#define WM8580_PLLB4_MCLKOUTSRC_OSC 0x60
|
|
|
|
#define WM8580_PLLB4_CLKOUTSRC_MASK 0x180
|
|
#define WM8580_PLLB4_CLKOUTSRC_PLLACLK 0x080
|
|
#define WM8580_PLLB4_CLKOUTSRC_PLLBCLK 0x100
|
|
#define WM8580_PLLB4_CLKOUTSRC_OSCCLK 0x180
|
|
|
|
/* CLKSEL (register 8h) */
|
|
#define WM8580_CLKSEL_DAC_CLKSEL_MASK 0x03
|
|
#define WM8580_CLKSEL_DAC_CLKSEL_PLLA 0x01
|
|
#define WM8580_CLKSEL_DAC_CLKSEL_PLLB 0x02
|
|
|
|
/* AIF control 1 (registers 9h-bh) */
|
|
#define WM8580_AIF_RATE_MASK 0x7
|
|
#define WM8580_AIF_BCLKSEL_MASK 0x18
|
|
|
|
#define WM8580_AIF_MS 0x20
|
|
|
|
#define WM8580_AIF_CLKSRC_MASK 0xc0
|
|
#define WM8580_AIF_CLKSRC_PLLA 0x40
|
|
#define WM8580_AIF_CLKSRC_PLLB 0x40
|
|
#define WM8580_AIF_CLKSRC_MCLK 0xc0
|
|
|
|
/* AIF control 2 (registers ch-eh) */
|
|
#define WM8580_AIF_FMT_MASK 0x03
|
|
#define WM8580_AIF_FMT_RIGHTJ 0x00
|
|
#define WM8580_AIF_FMT_LEFTJ 0x01
|
|
#define WM8580_AIF_FMT_I2S 0x02
|
|
#define WM8580_AIF_FMT_DSP 0x03
|
|
|
|
#define WM8580_AIF_LENGTH_MASK 0x0c
|
|
#define WM8580_AIF_LENGTH_16 0x00
|
|
#define WM8580_AIF_LENGTH_20 0x04
|
|
#define WM8580_AIF_LENGTH_24 0x08
|
|
#define WM8580_AIF_LENGTH_32 0x0c
|
|
|
|
#define WM8580_AIF_LRP 0x10
|
|
#define WM8580_AIF_BCP 0x20
|
|
|
|
/* Powerdown Register 1 (register 32h) */
|
|
#define WM8580_PWRDN1_PWDN 0x001
|
|
#define WM8580_PWRDN1_ALLDACPD 0x040
|
|
|
|
/* Powerdown Register 2 (register 33h) */
|
|
#define WM8580_PWRDN2_OSSCPD 0x001
|
|
#define WM8580_PWRDN2_PLLAPD 0x002
|
|
#define WM8580_PWRDN2_PLLBPD 0x004
|
|
#define WM8580_PWRDN2_SPDIFPD 0x008
|
|
#define WM8580_PWRDN2_SPDIFTXD 0x010
|
|
#define WM8580_PWRDN2_SPDIFRXD 0x020
|
|
|
|
#define WM8580_DAC_CONTROL5_MUTEALL 0x10
|
|
|
|
/*
|
|
* wm8580 register cache
|
|
* We can't read the WM8580 register space when we
|
|
* are using 2 wire for device control, so we cache them instead.
|
|
*/
|
|
static const u16 wm8580_reg[] = {
|
|
0x0121, 0x017e, 0x007d, 0x0014, /*R3*/
|
|
0x0121, 0x017e, 0x007d, 0x0194, /*R7*/
|
|
0x0010, 0x0002, 0x0002, 0x00c2, /*R11*/
|
|
0x0182, 0x0082, 0x000a, 0x0024, /*R15*/
|
|
0x0009, 0x0000, 0x00ff, 0x0000, /*R19*/
|
|
0x00ff, 0x00ff, 0x00ff, 0x00ff, /*R23*/
|
|
0x00ff, 0x00ff, 0x00ff, 0x00ff, /*R27*/
|
|
0x01f0, 0x0040, 0x0000, 0x0000, /*R31(0x1F)*/
|
|
0x0000, 0x0000, 0x0031, 0x000b, /*R35*/
|
|
0x0039, 0x0000, 0x0010, 0x0032, /*R39*/
|
|
0x0054, 0x0076, 0x0098, 0x0000, /*R43(0x2B)*/
|
|
0x0000, 0x0000, 0x0000, 0x0000, /*R47*/
|
|
0x0000, 0x0000, 0x005e, 0x003e, /*R51(0x33)*/
|
|
0x0000, 0x0000 /*R53*/
|
|
};
|
|
|
|
struct pll_state {
|
|
unsigned int in;
|
|
unsigned int out;
|
|
};
|
|
|
|
#define WM8580_NUM_SUPPLIES 3
|
|
static const char *wm8580_supply_names[WM8580_NUM_SUPPLIES] = {
|
|
"AVDD",
|
|
"DVDD",
|
|
"PVDD",
|
|
};
|
|
|
|
/* codec private data */
|
|
struct wm8580_priv {
|
|
enum snd_soc_control_type control_type;
|
|
struct regulator_bulk_data supplies[WM8580_NUM_SUPPLIES];
|
|
struct pll_state a;
|
|
struct pll_state b;
|
|
int sysclk[2];
|
|
};
|
|
|
|
static const DECLARE_TLV_DB_SCALE(dac_tlv, -12750, 50, 1);
|
|
|
|
static int wm8580_out_vu(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct soc_mixer_control *mc =
|
|
(struct soc_mixer_control *)kcontrol->private_value;
|
|
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
u16 *reg_cache = codec->reg_cache;
|
|
unsigned int reg = mc->reg;
|
|
unsigned int reg2 = mc->rreg;
|
|
int ret;
|
|
|
|
/* Clear the register cache so we write without VU set */
|
|
reg_cache[reg] = 0;
|
|
reg_cache[reg2] = 0;
|
|
|
|
ret = snd_soc_put_volsw_2r(kcontrol, ucontrol);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Now write again with the volume update bit set */
|
|
snd_soc_update_bits(codec, reg, 0x100, 0x100);
|
|
snd_soc_update_bits(codec, reg2, 0x100, 0x100);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct snd_kcontrol_new wm8580_snd_controls[] = {
|
|
SOC_DOUBLE_R_EXT_TLV("DAC1 Playback Volume",
|
|
WM8580_DIGITAL_ATTENUATION_DACL1,
|
|
WM8580_DIGITAL_ATTENUATION_DACR1,
|
|
0, 0xff, 0, snd_soc_get_volsw_2r, wm8580_out_vu, dac_tlv),
|
|
SOC_DOUBLE_R_EXT_TLV("DAC2 Playback Volume",
|
|
WM8580_DIGITAL_ATTENUATION_DACL2,
|
|
WM8580_DIGITAL_ATTENUATION_DACR2,
|
|
0, 0xff, 0, snd_soc_get_volsw_2r, wm8580_out_vu, dac_tlv),
|
|
SOC_DOUBLE_R_EXT_TLV("DAC3 Playback Volume",
|
|
WM8580_DIGITAL_ATTENUATION_DACL3,
|
|
WM8580_DIGITAL_ATTENUATION_DACR3,
|
|
0, 0xff, 0, snd_soc_get_volsw_2r, wm8580_out_vu, dac_tlv),
|
|
|
|
SOC_SINGLE("DAC1 Deemphasis Switch", WM8580_DAC_CONTROL3, 0, 1, 0),
|
|
SOC_SINGLE("DAC2 Deemphasis Switch", WM8580_DAC_CONTROL3, 1, 1, 0),
|
|
SOC_SINGLE("DAC3 Deemphasis Switch", WM8580_DAC_CONTROL3, 2, 1, 0),
|
|
|
|
SOC_DOUBLE("DAC1 Invert Switch", WM8580_DAC_CONTROL4, 0, 1, 1, 0),
|
|
SOC_DOUBLE("DAC2 Invert Switch", WM8580_DAC_CONTROL4, 2, 3, 1, 0),
|
|
SOC_DOUBLE("DAC3 Invert Switch", WM8580_DAC_CONTROL4, 4, 5, 1, 0),
|
|
|
|
SOC_SINGLE("DAC ZC Switch", WM8580_DAC_CONTROL5, 5, 1, 0),
|
|
SOC_SINGLE("DAC1 Switch", WM8580_DAC_CONTROL5, 0, 1, 1),
|
|
SOC_SINGLE("DAC2 Switch", WM8580_DAC_CONTROL5, 1, 1, 1),
|
|
SOC_SINGLE("DAC3 Switch", WM8580_DAC_CONTROL5, 2, 1, 1),
|
|
|
|
SOC_DOUBLE("Capture Switch", WM8580_ADC_CONTROL1, 0, 1, 1, 1),
|
|
SOC_SINGLE("Capture High-Pass Filter Switch", WM8580_ADC_CONTROL1, 4, 1, 0),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_widget wm8580_dapm_widgets[] = {
|
|
SND_SOC_DAPM_DAC("DAC1", "Playback", WM8580_PWRDN1, 2, 1),
|
|
SND_SOC_DAPM_DAC("DAC2", "Playback", WM8580_PWRDN1, 3, 1),
|
|
SND_SOC_DAPM_DAC("DAC3", "Playback", WM8580_PWRDN1, 4, 1),
|
|
|
|
SND_SOC_DAPM_OUTPUT("VOUT1L"),
|
|
SND_SOC_DAPM_OUTPUT("VOUT1R"),
|
|
SND_SOC_DAPM_OUTPUT("VOUT2L"),
|
|
SND_SOC_DAPM_OUTPUT("VOUT2R"),
|
|
SND_SOC_DAPM_OUTPUT("VOUT3L"),
|
|
SND_SOC_DAPM_OUTPUT("VOUT3R"),
|
|
|
|
SND_SOC_DAPM_ADC("ADC", "Capture", WM8580_PWRDN1, 1, 1),
|
|
|
|
SND_SOC_DAPM_INPUT("AINL"),
|
|
SND_SOC_DAPM_INPUT("AINR"),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route audio_map[] = {
|
|
{ "VOUT1L", NULL, "DAC1" },
|
|
{ "VOUT1R", NULL, "DAC1" },
|
|
|
|
{ "VOUT2L", NULL, "DAC2" },
|
|
{ "VOUT2R", NULL, "DAC2" },
|
|
|
|
{ "VOUT3L", NULL, "DAC3" },
|
|
{ "VOUT3R", NULL, "DAC3" },
|
|
|
|
{ "ADC", NULL, "AINL" },
|
|
{ "ADC", NULL, "AINR" },
|
|
};
|
|
|
|
static int wm8580_add_widgets(struct snd_soc_codec *codec)
|
|
{
|
|
struct snd_soc_dapm_context *dapm = &codec->dapm;
|
|
|
|
snd_soc_dapm_new_controls(dapm, wm8580_dapm_widgets,
|
|
ARRAY_SIZE(wm8580_dapm_widgets));
|
|
snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* PLL divisors */
|
|
struct _pll_div {
|
|
u32 prescale:1;
|
|
u32 postscale:1;
|
|
u32 freqmode:2;
|
|
u32 n:4;
|
|
u32 k:24;
|
|
};
|
|
|
|
/* The size in bits of the pll divide */
|
|
#define FIXED_PLL_SIZE (1 << 22)
|
|
|
|
/* PLL rate to output rate divisions */
|
|
static struct {
|
|
unsigned int div;
|
|
unsigned int freqmode;
|
|
unsigned int postscale;
|
|
} post_table[] = {
|
|
{ 2, 0, 0 },
|
|
{ 4, 0, 1 },
|
|
{ 4, 1, 0 },
|
|
{ 8, 1, 1 },
|
|
{ 8, 2, 0 },
|
|
{ 16, 2, 1 },
|
|
{ 12, 3, 0 },
|
|
{ 24, 3, 1 }
|
|
};
|
|
|
|
static int pll_factors(struct _pll_div *pll_div, unsigned int target,
|
|
unsigned int source)
|
|
{
|
|
u64 Kpart;
|
|
unsigned int K, Ndiv, Nmod;
|
|
int i;
|
|
|
|
pr_debug("wm8580: PLL %uHz->%uHz\n", source, target);
|
|
|
|
/* Scale the output frequency up; the PLL should run in the
|
|
* region of 90-100MHz.
|
|
*/
|
|
for (i = 0; i < ARRAY_SIZE(post_table); i++) {
|
|
if (target * post_table[i].div >= 90000000 &&
|
|
target * post_table[i].div <= 100000000) {
|
|
pll_div->freqmode = post_table[i].freqmode;
|
|
pll_div->postscale = post_table[i].postscale;
|
|
target *= post_table[i].div;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (i == ARRAY_SIZE(post_table)) {
|
|
printk(KERN_ERR "wm8580: Unable to scale output frequency "
|
|
"%u\n", target);
|
|
return -EINVAL;
|
|
}
|
|
|
|
Ndiv = target / source;
|
|
|
|
if (Ndiv < 5) {
|
|
source /= 2;
|
|
pll_div->prescale = 1;
|
|
Ndiv = target / source;
|
|
} else
|
|
pll_div->prescale = 0;
|
|
|
|
if ((Ndiv < 5) || (Ndiv > 13)) {
|
|
printk(KERN_ERR
|
|
"WM8580 N=%u outside supported range\n", Ndiv);
|
|
return -EINVAL;
|
|
}
|
|
|
|
pll_div->n = Ndiv;
|
|
Nmod = target % source;
|
|
Kpart = FIXED_PLL_SIZE * (long long)Nmod;
|
|
|
|
do_div(Kpart, source);
|
|
|
|
K = Kpart & 0xFFFFFFFF;
|
|
|
|
pll_div->k = K;
|
|
|
|
pr_debug("PLL %x.%x prescale %d freqmode %d postscale %d\n",
|
|
pll_div->n, pll_div->k, pll_div->prescale, pll_div->freqmode,
|
|
pll_div->postscale);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8580_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
|
|
int source, unsigned int freq_in, unsigned int freq_out)
|
|
{
|
|
int offset;
|
|
struct snd_soc_codec *codec = codec_dai->codec;
|
|
struct wm8580_priv *wm8580 = snd_soc_codec_get_drvdata(codec);
|
|
struct pll_state *state;
|
|
struct _pll_div pll_div;
|
|
unsigned int reg;
|
|
unsigned int pwr_mask;
|
|
int ret;
|
|
|
|
/* GCC isn't able to work out the ifs below for initialising/using
|
|
* pll_div so suppress warnings.
|
|
*/
|
|
memset(&pll_div, 0, sizeof(pll_div));
|
|
|
|
switch (pll_id) {
|
|
case WM8580_PLLA:
|
|
state = &wm8580->a;
|
|
offset = 0;
|
|
pwr_mask = WM8580_PWRDN2_PLLAPD;
|
|
break;
|
|
case WM8580_PLLB:
|
|
state = &wm8580->b;
|
|
offset = 4;
|
|
pwr_mask = WM8580_PWRDN2_PLLBPD;
|
|
break;
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (freq_in && freq_out) {
|
|
ret = pll_factors(&pll_div, freq_out, freq_in);
|
|
if (ret != 0)
|
|
return ret;
|
|
}
|
|
|
|
state->in = freq_in;
|
|
state->out = freq_out;
|
|
|
|
/* Always disable the PLL - it is not safe to leave it running
|
|
* while reprogramming it.
|
|
*/
|
|
reg = snd_soc_read(codec, WM8580_PWRDN2);
|
|
snd_soc_write(codec, WM8580_PWRDN2, reg | pwr_mask);
|
|
|
|
if (!freq_in || !freq_out)
|
|
return 0;
|
|
|
|
snd_soc_write(codec, WM8580_PLLA1 + offset, pll_div.k & 0x1ff);
|
|
snd_soc_write(codec, WM8580_PLLA2 + offset, (pll_div.k >> 9) & 0x1ff);
|
|
snd_soc_write(codec, WM8580_PLLA3 + offset,
|
|
(pll_div.k >> 18 & 0xf) | (pll_div.n << 4));
|
|
|
|
reg = snd_soc_read(codec, WM8580_PLLA4 + offset);
|
|
reg &= ~0x1b;
|
|
reg |= pll_div.prescale | pll_div.postscale << 1 |
|
|
pll_div.freqmode << 3;
|
|
|
|
snd_soc_write(codec, WM8580_PLLA4 + offset, reg);
|
|
|
|
/* All done, turn it on */
|
|
reg = snd_soc_read(codec, WM8580_PWRDN2);
|
|
snd_soc_write(codec, WM8580_PWRDN2, reg & ~pwr_mask);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const int wm8580_sysclk_ratios[] = {
|
|
128, 192, 256, 384, 512, 768, 1152,
|
|
};
|
|
|
|
/*
|
|
* Set PCM DAI bit size and sample rate.
|
|
*/
|
|
static int wm8580_paif_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = substream->private_data;
|
|
struct snd_soc_codec *codec = rtd->codec;
|
|
struct wm8580_priv *wm8580 = snd_soc_codec_get_drvdata(codec);
|
|
u16 paifa = 0;
|
|
u16 paifb = 0;
|
|
int i, ratio, osr;
|
|
|
|
/* bit size */
|
|
switch (params_format(params)) {
|
|
case SNDRV_PCM_FORMAT_S16_LE:
|
|
paifa |= 0x8;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S20_3LE:
|
|
paifa |= 0x0;
|
|
paifb |= WM8580_AIF_LENGTH_20;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S24_LE:
|
|
paifa |= 0x0;
|
|
paifb |= WM8580_AIF_LENGTH_24;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S32_LE:
|
|
paifa |= 0x0;
|
|
paifb |= WM8580_AIF_LENGTH_32;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Look up the SYSCLK ratio; accept only exact matches */
|
|
ratio = wm8580->sysclk[dai->driver->id] / params_rate(params);
|
|
for (i = 0; i < ARRAY_SIZE(wm8580_sysclk_ratios); i++)
|
|
if (ratio == wm8580_sysclk_ratios[i])
|
|
break;
|
|
if (i == ARRAY_SIZE(wm8580_sysclk_ratios)) {
|
|
dev_err(codec->dev, "Invalid clock ratio %d/%d\n",
|
|
wm8580->sysclk[dai->driver->id], params_rate(params));
|
|
return -EINVAL;
|
|
}
|
|
paifa |= i;
|
|
dev_dbg(codec->dev, "Running at %dfs with %dHz clock\n",
|
|
wm8580_sysclk_ratios[i], wm8580->sysclk[dai->driver->id]);
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
|
|
switch (ratio) {
|
|
case 128:
|
|
case 192:
|
|
osr = WM8580_DACOSR;
|
|
dev_dbg(codec->dev, "Selecting 64x OSR\n");
|
|
break;
|
|
default:
|
|
osr = 0;
|
|
dev_dbg(codec->dev, "Selecting 128x OSR\n");
|
|
break;
|
|
}
|
|
|
|
snd_soc_update_bits(codec, WM8580_PAIF3, WM8580_DACOSR, osr);
|
|
}
|
|
|
|
snd_soc_update_bits(codec, WM8580_PAIF1 + dai->driver->id,
|
|
WM8580_AIF_RATE_MASK | WM8580_AIF_BCLKSEL_MASK,
|
|
paifa);
|
|
snd_soc_update_bits(codec, WM8580_PAIF3 + dai->driver->id,
|
|
WM8580_AIF_LENGTH_MASK, paifb);
|
|
return 0;
|
|
}
|
|
|
|
static int wm8580_set_paif_dai_fmt(struct snd_soc_dai *codec_dai,
|
|
unsigned int fmt)
|
|
{
|
|
struct snd_soc_codec *codec = codec_dai->codec;
|
|
unsigned int aifa;
|
|
unsigned int aifb;
|
|
int can_invert_lrclk;
|
|
|
|
aifa = snd_soc_read(codec, WM8580_PAIF1 + codec_dai->driver->id);
|
|
aifb = snd_soc_read(codec, WM8580_PAIF3 + codec_dai->driver->id);
|
|
|
|
aifb &= ~(WM8580_AIF_FMT_MASK | WM8580_AIF_LRP | WM8580_AIF_BCP);
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
aifa &= ~WM8580_AIF_MS;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
aifa |= WM8580_AIF_MS;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
can_invert_lrclk = 1;
|
|
aifb |= WM8580_AIF_FMT_I2S;
|
|
break;
|
|
case SND_SOC_DAIFMT_RIGHT_J:
|
|
can_invert_lrclk = 1;
|
|
aifb |= WM8580_AIF_FMT_RIGHTJ;
|
|
break;
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
can_invert_lrclk = 1;
|
|
aifb |= WM8580_AIF_FMT_LEFTJ;
|
|
break;
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
can_invert_lrclk = 0;
|
|
aifb |= WM8580_AIF_FMT_DSP;
|
|
break;
|
|
case SND_SOC_DAIFMT_DSP_B:
|
|
can_invert_lrclk = 0;
|
|
aifb |= WM8580_AIF_FMT_DSP;
|
|
aifb |= WM8580_AIF_LRP;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
break;
|
|
|
|
case SND_SOC_DAIFMT_IB_IF:
|
|
if (!can_invert_lrclk)
|
|
return -EINVAL;
|
|
aifb |= WM8580_AIF_BCP;
|
|
aifb |= WM8580_AIF_LRP;
|
|
break;
|
|
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
aifb |= WM8580_AIF_BCP;
|
|
break;
|
|
|
|
case SND_SOC_DAIFMT_NB_IF:
|
|
if (!can_invert_lrclk)
|
|
return -EINVAL;
|
|
aifb |= WM8580_AIF_LRP;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
snd_soc_write(codec, WM8580_PAIF1 + codec_dai->driver->id, aifa);
|
|
snd_soc_write(codec, WM8580_PAIF3 + codec_dai->driver->id, aifb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8580_set_dai_clkdiv(struct snd_soc_dai *codec_dai,
|
|
int div_id, int div)
|
|
{
|
|
struct snd_soc_codec *codec = codec_dai->codec;
|
|
unsigned int reg;
|
|
|
|
switch (div_id) {
|
|
case WM8580_MCLK:
|
|
reg = snd_soc_read(codec, WM8580_PLLB4);
|
|
reg &= ~WM8580_PLLB4_MCLKOUTSRC_MASK;
|
|
|
|
switch (div) {
|
|
case WM8580_CLKSRC_MCLK:
|
|
/* Input */
|
|
break;
|
|
|
|
case WM8580_CLKSRC_PLLA:
|
|
reg |= WM8580_PLLB4_MCLKOUTSRC_PLLA;
|
|
break;
|
|
case WM8580_CLKSRC_PLLB:
|
|
reg |= WM8580_PLLB4_MCLKOUTSRC_PLLB;
|
|
break;
|
|
|
|
case WM8580_CLKSRC_OSC:
|
|
reg |= WM8580_PLLB4_MCLKOUTSRC_OSC;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
snd_soc_write(codec, WM8580_PLLB4, reg);
|
|
break;
|
|
|
|
case WM8580_CLKOUTSRC:
|
|
reg = snd_soc_read(codec, WM8580_PLLB4);
|
|
reg &= ~WM8580_PLLB4_CLKOUTSRC_MASK;
|
|
|
|
switch (div) {
|
|
case WM8580_CLKSRC_NONE:
|
|
break;
|
|
|
|
case WM8580_CLKSRC_PLLA:
|
|
reg |= WM8580_PLLB4_CLKOUTSRC_PLLACLK;
|
|
break;
|
|
|
|
case WM8580_CLKSRC_PLLB:
|
|
reg |= WM8580_PLLB4_CLKOUTSRC_PLLBCLK;
|
|
break;
|
|
|
|
case WM8580_CLKSRC_OSC:
|
|
reg |= WM8580_PLLB4_CLKOUTSRC_OSCCLK;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
snd_soc_write(codec, WM8580_PLLB4, reg);
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8580_set_sysclk(struct snd_soc_dai *dai, int clk_id,
|
|
unsigned int freq, int dir)
|
|
{
|
|
struct snd_soc_codec *codec = dai->codec;
|
|
struct wm8580_priv *wm8580 = snd_soc_codec_get_drvdata(codec);
|
|
int sel, sel_mask, sel_shift;
|
|
|
|
switch (dai->driver->id) {
|
|
case WM8580_DAI_PAIFRX:
|
|
sel_mask = 0x3;
|
|
sel_shift = 0;
|
|
break;
|
|
|
|
case WM8580_DAI_PAIFTX:
|
|
sel_mask = 0xc;
|
|
sel_shift = 2;
|
|
break;
|
|
|
|
default:
|
|
BUG_ON("Unknown DAI driver ID\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (clk_id) {
|
|
case WM8580_CLKSRC_ADCMCLK:
|
|
if (dai->driver->id != WM8580_DAI_PAIFTX)
|
|
return -EINVAL;
|
|
sel = 0 << sel_shift;
|
|
break;
|
|
case WM8580_CLKSRC_PLLA:
|
|
sel = 1 << sel_shift;
|
|
break;
|
|
case WM8580_CLKSRC_PLLB:
|
|
sel = 2 << sel_shift;
|
|
break;
|
|
case WM8580_CLKSRC_MCLK:
|
|
sel = 3 << sel_shift;
|
|
break;
|
|
default:
|
|
dev_err(codec->dev, "Unknown clock %d\n", clk_id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* We really should validate PLL settings but not yet */
|
|
wm8580->sysclk[dai->driver->id] = freq;
|
|
|
|
return snd_soc_update_bits(codec, WM8580_CLKSEL, sel_mask, sel);
|
|
}
|
|
|
|
static int wm8580_digital_mute(struct snd_soc_dai *codec_dai, int mute)
|
|
{
|
|
struct snd_soc_codec *codec = codec_dai->codec;
|
|
unsigned int reg;
|
|
|
|
reg = snd_soc_read(codec, WM8580_DAC_CONTROL5);
|
|
|
|
if (mute)
|
|
reg |= WM8580_DAC_CONTROL5_MUTEALL;
|
|
else
|
|
reg &= ~WM8580_DAC_CONTROL5_MUTEALL;
|
|
|
|
snd_soc_write(codec, WM8580_DAC_CONTROL5, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8580_set_bias_level(struct snd_soc_codec *codec,
|
|
enum snd_soc_bias_level level)
|
|
{
|
|
u16 reg;
|
|
switch (level) {
|
|
case SND_SOC_BIAS_ON:
|
|
case SND_SOC_BIAS_PREPARE:
|
|
break;
|
|
|
|
case SND_SOC_BIAS_STANDBY:
|
|
if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
|
|
/* Power up and get individual control of the DACs */
|
|
reg = snd_soc_read(codec, WM8580_PWRDN1);
|
|
reg &= ~(WM8580_PWRDN1_PWDN | WM8580_PWRDN1_ALLDACPD);
|
|
snd_soc_write(codec, WM8580_PWRDN1, reg);
|
|
|
|
/* Make VMID high impedance */
|
|
reg = snd_soc_read(codec, WM8580_ADC_CONTROL1);
|
|
reg &= ~0x100;
|
|
snd_soc_write(codec, WM8580_ADC_CONTROL1, reg);
|
|
}
|
|
break;
|
|
|
|
case SND_SOC_BIAS_OFF:
|
|
reg = snd_soc_read(codec, WM8580_PWRDN1);
|
|
snd_soc_write(codec, WM8580_PWRDN1, reg | WM8580_PWRDN1_PWDN);
|
|
break;
|
|
}
|
|
codec->dapm.bias_level = level;
|
|
return 0;
|
|
}
|
|
|
|
#define WM8580_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
|
|
SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
|
|
|
|
static struct snd_soc_dai_ops wm8580_dai_ops_playback = {
|
|
.set_sysclk = wm8580_set_sysclk,
|
|
.hw_params = wm8580_paif_hw_params,
|
|
.set_fmt = wm8580_set_paif_dai_fmt,
|
|
.set_clkdiv = wm8580_set_dai_clkdiv,
|
|
.set_pll = wm8580_set_dai_pll,
|
|
.digital_mute = wm8580_digital_mute,
|
|
};
|
|
|
|
static struct snd_soc_dai_ops wm8580_dai_ops_capture = {
|
|
.set_sysclk = wm8580_set_sysclk,
|
|
.hw_params = wm8580_paif_hw_params,
|
|
.set_fmt = wm8580_set_paif_dai_fmt,
|
|
.set_clkdiv = wm8580_set_dai_clkdiv,
|
|
.set_pll = wm8580_set_dai_pll,
|
|
};
|
|
|
|
static struct snd_soc_dai_driver wm8580_dai[] = {
|
|
{
|
|
.name = "wm8580-hifi-playback",
|
|
.id = WM8580_DAI_PAIFRX,
|
|
.playback = {
|
|
.stream_name = "Playback",
|
|
.channels_min = 1,
|
|
.channels_max = 6,
|
|
.rates = SNDRV_PCM_RATE_8000_192000,
|
|
.formats = WM8580_FORMATS,
|
|
},
|
|
.ops = &wm8580_dai_ops_playback,
|
|
},
|
|
{
|
|
.name = "wm8580-hifi-capture",
|
|
.id = WM8580_DAI_PAIFTX,
|
|
.capture = {
|
|
.stream_name = "Capture",
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.rates = SNDRV_PCM_RATE_8000_192000,
|
|
.formats = WM8580_FORMATS,
|
|
},
|
|
.ops = &wm8580_dai_ops_capture,
|
|
},
|
|
};
|
|
|
|
static int wm8580_probe(struct snd_soc_codec *codec)
|
|
{
|
|
struct wm8580_priv *wm8580 = snd_soc_codec_get_drvdata(codec);
|
|
int ret = 0,i;
|
|
|
|
ret = snd_soc_codec_set_cache_io(codec, 7, 9, wm8580->control_type);
|
|
if (ret < 0) {
|
|
dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(wm8580->supplies); i++)
|
|
wm8580->supplies[i].supply = wm8580_supply_names[i];
|
|
|
|
ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8580->supplies),
|
|
wm8580->supplies);
|
|
if (ret != 0) {
|
|
dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(wm8580->supplies),
|
|
wm8580->supplies);
|
|
if (ret != 0) {
|
|
dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
|
|
goto err_regulator_get;
|
|
}
|
|
|
|
/* Get the codec into a known state */
|
|
ret = snd_soc_write(codec, WM8580_RESET, 0);
|
|
if (ret != 0) {
|
|
dev_err(codec->dev, "Failed to reset codec: %d\n", ret);
|
|
goto err_regulator_enable;
|
|
}
|
|
|
|
wm8580_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
|
|
|
|
snd_soc_add_controls(codec, wm8580_snd_controls,
|
|
ARRAY_SIZE(wm8580_snd_controls));
|
|
wm8580_add_widgets(codec);
|
|
|
|
return 0;
|
|
|
|
err_regulator_enable:
|
|
regulator_bulk_disable(ARRAY_SIZE(wm8580->supplies), wm8580->supplies);
|
|
err_regulator_get:
|
|
regulator_bulk_free(ARRAY_SIZE(wm8580->supplies), wm8580->supplies);
|
|
return ret;
|
|
}
|
|
|
|
/* power down chip */
|
|
static int wm8580_remove(struct snd_soc_codec *codec)
|
|
{
|
|
struct wm8580_priv *wm8580 = snd_soc_codec_get_drvdata(codec);
|
|
|
|
wm8580_set_bias_level(codec, SND_SOC_BIAS_OFF);
|
|
|
|
regulator_bulk_disable(ARRAY_SIZE(wm8580->supplies), wm8580->supplies);
|
|
regulator_bulk_free(ARRAY_SIZE(wm8580->supplies), wm8580->supplies);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct snd_soc_codec_driver soc_codec_dev_wm8580 = {
|
|
.probe = wm8580_probe,
|
|
.remove = wm8580_remove,
|
|
.set_bias_level = wm8580_set_bias_level,
|
|
.reg_cache_size = ARRAY_SIZE(wm8580_reg),
|
|
.reg_word_size = sizeof(u16),
|
|
.reg_cache_default = wm8580_reg,
|
|
};
|
|
|
|
static const struct of_device_id wm8580_of_match[] = {
|
|
{ .compatible = "wlf,wm8580" },
|
|
{ },
|
|
};
|
|
|
|
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
|
|
static int wm8580_i2c_probe(struct i2c_client *i2c,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct wm8580_priv *wm8580;
|
|
int ret;
|
|
|
|
wm8580 = kzalloc(sizeof(struct wm8580_priv), GFP_KERNEL);
|
|
if (wm8580 == NULL)
|
|
return -ENOMEM;
|
|
|
|
i2c_set_clientdata(i2c, wm8580);
|
|
wm8580->control_type = SND_SOC_I2C;
|
|
|
|
ret = snd_soc_register_codec(&i2c->dev,
|
|
&soc_codec_dev_wm8580, wm8580_dai, ARRAY_SIZE(wm8580_dai));
|
|
if (ret < 0)
|
|
kfree(wm8580);
|
|
return ret;
|
|
}
|
|
|
|
static int wm8580_i2c_remove(struct i2c_client *client)
|
|
{
|
|
snd_soc_unregister_codec(&client->dev);
|
|
kfree(i2c_get_clientdata(client));
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id wm8580_i2c_id[] = {
|
|
{ "wm8580", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, wm8580_i2c_id);
|
|
|
|
static struct i2c_driver wm8580_i2c_driver = {
|
|
.driver = {
|
|
.name = "wm8580",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = wm8580_of_match,
|
|
},
|
|
.probe = wm8580_i2c_probe,
|
|
.remove = wm8580_i2c_remove,
|
|
.id_table = wm8580_i2c_id,
|
|
};
|
|
#endif
|
|
|
|
static int __init wm8580_modinit(void)
|
|
{
|
|
int ret = 0;
|
|
|
|
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
|
|
ret = i2c_add_driver(&wm8580_i2c_driver);
|
|
if (ret != 0) {
|
|
pr_err("Failed to register WM8580 I2C driver: %d\n", ret);
|
|
}
|
|
#endif
|
|
|
|
return ret;
|
|
}
|
|
module_init(wm8580_modinit);
|
|
|
|
static void __exit wm8580_exit(void)
|
|
{
|
|
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
|
|
i2c_del_driver(&wm8580_i2c_driver);
|
|
#endif
|
|
}
|
|
module_exit(wm8580_exit);
|
|
|
|
MODULE_DESCRIPTION("ASoC WM8580 driver");
|
|
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
|
|
MODULE_LICENSE("GPL");
|