leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
0f58487b1e
linux/arch/arm/mach-exynos/mach-origen.c
Linus Torvalds 1bfecd9358 ARM: board specific updates 
These changes are all specific to one board only. We're trying to keep
 the number of board files low, but generally board level updates are
 ok on platforms that are working on moving towards DT based probing,
 which will eventually lead to removing them.
 
 The board-ams-delta.c board file gets a conflict between the removal of
 ams_delta_config and the addition of a lot of other data. The Kconfig
 file has two changes in the same line, and in exynos, the power domain
 cleanup conflicts with the addition of the image sensor device.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 [olof: Amended a fix for a mismerge to board-omap4panda.c]
 Signed-off-by: Olof Johansson <olof@lixom.net>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPckIXAAoJEIwa5zzehBx35uUP/jns0renNAMmiu2vBHGQtn4z
 xiNXjDTJ8DeD4mKf17rjn/uaJgQ0w3Doq2nEsi5rPqLK4Uqqk+NG1zYa77QBWHbx
 FUgBPz+oViTDkanp4G8cygXvGfNkb1GvuJxEBvxQ1mwuG4JhwlFbQxGIaS8ZwOAN
 DIyVCgSXy40B+748RwdZ2AY7CYvWiQWrQYsIH6NO0rtZIXjyV0kIsyVtEXZpqWtF
 xNz2HHXVMrui2JQ7FQ0zZglY8+YCxjeJk4v++FfqCJiMzU1yZJw7E30NjhcWAaR6
 odJM2YIyhvunxPfx3ZUHimsNjfU+l/0uXgDHeLFSWVyIjPFXwqZDi/6onP3FI4Jc
 sIoTSwDAQpnZJ6KffAYkcyyfsWN61GOE96Xa2eRb6+78CEiMh7vJ8TIRieiOWxjm
 NbB0xzaKxa97F/8z7w6V6Z4dNhnokWJZvtJdgLZUYAqIgnxstFkJZ9+Tqt77G4t3
 5iSbIMeFPsfh5sUeAVjr5+zVeUOm9PTRI0n0RY+Wd16Ke6DO1qobKAYOzrzI5idz
 k7ni76/zgGn3NS5F3TxdRHowkeGUwUU6poyopgQ0pyscDylVpzgMIqmAwLdzrVp5
 joVEoKi6h4oqhAZtiysXuF85bUfCW0ziDUuib07SX8wcEIAIr+mWob1Ei+wJrefe
 g0Ch3ZbCRQMOwSOQ70Ci
 =HPiJ
 -----END PGP SIGNATURE-----

Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "ARM: board specific updates" from Arnd Bergmann/Olof Johansson:
 "These changes are all specific to one board only.  We're trying to
  keep the number of board files low, but generally board level updates
  are ok on platforms that are working on moving towards DT based
  probing, which will eventually lead to removing them.

  The board-ams-delta.c board file gets a conflict between the removal
  of ams_delta_config and the addition of a lot of other data.  The
  Kconfig file has two changes in the same line, and in exynos, the
  power domain cleanup conflicts with the addition of the image sensor
  device.

  Signed-off-by: Arnd Bergmann <arnd@arndb.de>
  [olof: Amended a fix for a mismerge to board-omap4panda.c]
  Signed-off-by: Olof Johansson <olof@lixom.net>"

Fixed up some fairly trivial conflicts manually.

* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (82 commits)
  i.MX35-PDK: Add Camera support
  ARM : mx35: 3ds-board: add framebuffer device
  pxa/hx4700: Remove pcmcia platform_device structure
  ARM: pxa/hx4700: Reduce sleep mode battery discharge by 35%
  ARM: pxa/hx4700: Remove unwanted request for GPIO105
  ARM: EXYNOS: support Exynos4210-bus Devfreq driver on Nuri board
  ARM: EXYNOS: Register JPEG on nuri
  ARM: EXYNOS: Register JPEG on universal_c210
  ARM: S5PV210: Enable JPEG on SMDKV210
  ARM: S5PV210: Add JPEG board definition
  ARM: EXYNOS: Enable JPEG on Origen
  ARM: EXYNOS: Enable JPEG on SMDKV310
  ARM: EXYNOS: Add __init attribute to universal_camera_init()
  ARM: EXYNOS: Add __init attribute to nuri_camera_init()
  ARM: S5PV210: Enable FIMC on SMDKC110
  ARM: S5PV210: Enable FIMC on SMDKV210
  ARM: S5PV210: Enable MFC on SMDKC110
  ARM: S5PV210: Enable MFC on SMDKV210
  ARM: EXYNOS: Enable G2D on SMDKV310
  ARM: tegra: update defconfig
  ...
2012-03-27 16:27:28 -07:00

742 lines
18 KiB
C
Raw Blame History

/* linux/arch/arm/mach-exynos4/mach-origen.c
*
* Copyright (c) 2011 Insignal Co., Ltd.
* http://www.insignal.co.kr/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/serial_core.h>
#include <linux/gpio.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/input.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio_keys.h>
#include <linux/i2c.h>
#include <linux/regulator/machine.h>
#include <linux/mfd/max8997.h>
#include <linux/lcd.h>
#include <linux/rfkill-gpio.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <video/platform_lcd.h>
#include <plat/regs-serial.h>
#include <plat/regs-fb-v4.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/sdhci.h>
#include <plat/iic.h>
#include <plat/ehci.h>
#include <plat/clock.h>
#include <plat/gpio-cfg.h>
#include <plat/backlight.h>
#include <plat/pd.h>
#include <plat/fb.h>
#include <plat/mfc.h>
#include <mach/ohci.h>
#include <mach/map.h>
#include "common.h"
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define ORIGEN_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
#define ORIGEN_ULCON_DEFAULT S3C2410_LCON_CS8
#define ORIGEN_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S5PV210_UFCON_TXTRIG4 | \
S5PV210_UFCON_RXTRIG4)
static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = ORIGEN_UCON_DEFAULT,
.ulcon = ORIGEN_ULCON_DEFAULT,
.ufcon = ORIGEN_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = ORIGEN_UCON_DEFAULT,
.ulcon = ORIGEN_ULCON_DEFAULT,
.ufcon = ORIGEN_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = ORIGEN_UCON_DEFAULT,
.ulcon = ORIGEN_ULCON_DEFAULT,
.ufcon = ORIGEN_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
.flags = 0,
.ucon = ORIGEN_UCON_DEFAULT,
.ulcon = ORIGEN_ULCON_DEFAULT,
.ufcon = ORIGEN_UFCON_DEFAULT,
},
};
static struct regulator_consumer_supply __initdata ldo3_consumer[] = {
REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */
REGULATOR_SUPPLY("vdd", "exynos4-hdmi"), /* HDMI */
REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"), /* HDMI */
};
static struct regulator_consumer_supply __initdata ldo6_consumer[] = {
REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"), /* MIPI */
};
static struct regulator_consumer_supply __initdata ldo7_consumer[] = {
REGULATOR_SUPPLY("avdd", "alc5625"), /* Realtek ALC5625 */
};
static struct regulator_consumer_supply __initdata ldo8_consumer[] = {
REGULATOR_SUPPLY("vdd", "s5p-adc"), /* ADC */
REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"), /* HDMI */
};
static struct regulator_consumer_supply __initdata ldo9_consumer[] = {
REGULATOR_SUPPLY("dvdd", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
};
static struct regulator_consumer_supply __initdata ldo11_consumer[] = {
REGULATOR_SUPPLY("dvdd", "alc5625"), /* Realtek ALC5625 */
};
static struct regulator_consumer_supply __initdata ldo14_consumer[] = {
REGULATOR_SUPPLY("avdd18", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
};
static struct regulator_consumer_supply __initdata ldo17_consumer[] = {
REGULATOR_SUPPLY("vdd33", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
};
static struct regulator_consumer_supply __initdata buck1_consumer[] = {
REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */
};
static struct regulator_consumer_supply __initdata buck2_consumer[] = {
REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */
};
static struct regulator_consumer_supply __initdata buck3_consumer[] = {
REGULATOR_SUPPLY("vdd_g3d", "mali_drm"), /* G3D */
};
static struct regulator_consumer_supply __initdata buck7_consumer[] = {
REGULATOR_SUPPLY("vcc", "platform-lcd"), /* LCD */
};
static struct regulator_init_data __initdata max8997_ldo1_data = {
.constraints = {
.name = "VDD_ABB_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data __initdata max8997_ldo2_data = {
.constraints = {
.name = "VDD_ALIVE_1.1V",
.min_uV = 1100000,
.max_uV = 1100000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.enabled = 1,
},
},
};
static struct regulator_init_data __initdata max8997_ldo3_data = {
.constraints = {
.name = "VMIPI_1.1V",
.min_uV = 1100000,
.max_uV = 1100000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(ldo3_consumer),
.consumer_supplies = ldo3_consumer,
};
static struct regulator_init_data __initdata max8997_ldo4_data = {
.constraints = {
.name = "VDD_RTC_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data __initdata max8997_ldo6_data = {
.constraints = {
.name = "VMIPI_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(ldo6_consumer),
.consumer_supplies = ldo6_consumer,
};
static struct regulator_init_data __initdata max8997_ldo7_data = {
.constraints = {
.name = "VDD_AUD_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(ldo7_consumer),
.consumer_supplies = ldo7_consumer,
};
static struct regulator_init_data __initdata max8997_ldo8_data = {
.constraints = {
.name = "VADC_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(ldo8_consumer),
.consumer_supplies = ldo8_consumer,
};
static struct regulator_init_data __initdata max8997_ldo9_data = {
.constraints = {
.name = "DVDD_SWB_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
.always_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(ldo9_consumer),
.consumer_supplies = ldo9_consumer,
};
static struct regulator_init_data __initdata max8997_ldo10_data = {
.constraints = {
.name = "VDD_PLL_1.1V",
.min_uV = 1100000,
.max_uV = 1100000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data __initdata max8997_ldo11_data = {
.constraints = {
.name = "VDD_AUD_3V",
.min_uV = 3000000,
.max_uV = 3000000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(ldo11_consumer),
.consumer_supplies = ldo11_consumer,
};
static struct regulator_init_data __initdata max8997_ldo14_data = {
.constraints = {
.name = "AVDD18_SWB_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.always_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(ldo14_consumer),
.consumer_supplies = ldo14_consumer,
};
static struct regulator_init_data __initdata max8997_ldo17_data = {
.constraints = {
.name = "VDD_SWB_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
.always_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(ldo17_consumer),
.consumer_supplies = ldo17_consumer,
};
static struct regulator_init_data __initdata max8997_ldo21_data = {
.constraints = {
.name = "VDD_MIF_1.2V",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data __initdata max8997_buck1_data = {
.constraints = {
.name = "VDD_ARM_1.2V",
.min_uV = 950000,
.max_uV = 1350000,
.always_on = 1,
.boot_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(buck1_consumer),
.consumer_supplies = buck1_consumer,
};
static struct regulator_init_data __initdata max8997_buck2_data = {
.constraints = {
.name = "VDD_INT_1.1V",
.min_uV = 900000,
.max_uV = 1100000,
.always_on = 1,
.boot_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(buck2_consumer),
.consumer_supplies = buck2_consumer,
};
static struct regulator_init_data __initdata max8997_buck3_data = {
.constraints = {
.name = "VDD_G3D_1.1V",
.min_uV = 900000,
.max_uV = 1100000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(buck3_consumer),
.consumer_supplies = buck3_consumer,
};
static struct regulator_init_data __initdata max8997_buck5_data = {
.constraints = {
.name = "VDDQ_M1M2_1.2V",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data __initdata max8997_buck7_data = {
.constraints = {
.name = "VDD_LCD_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.boot_on = 1,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1
},
},
.num_consumer_supplies = ARRAY_SIZE(buck7_consumer),
.consumer_supplies = buck7_consumer,
};
static struct max8997_regulator_data __initdata origen_max8997_regulators[] = {
{ MAX8997_LDO1, &max8997_ldo1_data },
{ MAX8997_LDO2, &max8997_ldo2_data },
{ MAX8997_LDO3, &max8997_ldo3_data },
{ MAX8997_LDO4, &max8997_ldo4_data },
{ MAX8997_LDO6, &max8997_ldo6_data },
{ MAX8997_LDO7, &max8997_ldo7_data },
{ MAX8997_LDO8, &max8997_ldo8_data },
{ MAX8997_LDO9, &max8997_ldo9_data },
{ MAX8997_LDO10, &max8997_ldo10_data },
{ MAX8997_LDO11, &max8997_ldo11_data },
{ MAX8997_LDO14, &max8997_ldo14_data },
{ MAX8997_LDO17, &max8997_ldo17_data },
{ MAX8997_LDO21, &max8997_ldo21_data },
{ MAX8997_BUCK1, &max8997_buck1_data },
{ MAX8997_BUCK2, &max8997_buck2_data },
{ MAX8997_BUCK3, &max8997_buck3_data },
{ MAX8997_BUCK5, &max8997_buck5_data },
{ MAX8997_BUCK7, &max8997_buck7_data },
};
static struct max8997_platform_data __initdata origen_max8997_pdata = {
.num_regulators = ARRAY_SIZE(origen_max8997_regulators),
.regulators = origen_max8997_regulators,
.wakeup = true,
.buck1_gpiodvs = false,
.buck2_gpiodvs = false,
.buck5_gpiodvs = false,
.irq_base = IRQ_GPIO_END + 1,
.ignore_gpiodvs_side_effect = true,
.buck125_default_idx = 0x0,
.buck125_gpios[0] = EXYNOS4_GPX0(0),
.buck125_gpios[1] = EXYNOS4_GPX0(1),
.buck125_gpios[2] = EXYNOS4_GPX0(2),
.buck1_voltage[0] = 1350000,
.buck1_voltage[1] = 1300000,
.buck1_voltage[2] = 1250000,
.buck1_voltage[3] = 1200000,
.buck1_voltage[4] = 1150000,
.buck1_voltage[5] = 1100000,
.buck1_voltage[6] = 1000000,
.buck1_voltage[7] = 950000,
.buck2_voltage[0] = 1100000,
.buck2_voltage[1] = 1100000,
.buck2_voltage[2] = 1100000,
.buck2_voltage[3] = 1100000,
.buck2_voltage[4] = 1000000,
.buck2_voltage[5] = 1000000,
.buck2_voltage[6] = 1000000,
.buck2_voltage[7] = 1000000,
.buck5_voltage[0] = 1200000,
.buck5_voltage[1] = 1200000,
.buck5_voltage[2] = 1200000,
.buck5_voltage[3] = 1200000,
.buck5_voltage[4] = 1200000,
.buck5_voltage[5] = 1200000,
.buck5_voltage[6] = 1200000,
.buck5_voltage[7] = 1200000,
};
/* I2C0 */
static struct i2c_board_info i2c0_devs[] __initdata = {
{
I2C_BOARD_INFO("max8997", (0xCC >> 1)),
.platform_data = &origen_max8997_pdata,
.irq = IRQ_EINT(4),
},
};
static struct s3c_sdhci_platdata origen_hsmmc0_pdata __initdata = {
.cd_type = S3C_SDHCI_CD_INTERNAL,
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
};
static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
.cd_type = S3C_SDHCI_CD_INTERNAL,
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
};
/* USB EHCI */
static struct s5p_ehci_platdata origen_ehci_pdata;
static void __init origen_ehci_init(void)
{
struct s5p_ehci_platdata *pdata = &origen_ehci_pdata;
s5p_ehci_set_platdata(pdata);
}
/* USB OHCI */
static struct exynos4_ohci_platdata origen_ohci_pdata;
static void __init origen_ohci_init(void)
{
struct exynos4_ohci_platdata *pdata = &origen_ohci_pdata;
exynos4_ohci_set_platdata(pdata);
}
static struct gpio_keys_button origen_gpio_keys_table[] = {
{
.code = KEY_MENU,
.gpio = EXYNOS4_GPX1(5),
.desc = "gpio-keys: KEY_MENU",
.type = EV_KEY,
.active_low = 1,
.wakeup = 1,
.debounce_interval = 1,
}, {
.code = KEY_HOME,
.gpio = EXYNOS4_GPX1(6),
.desc = "gpio-keys: KEY_HOME",
.type = EV_KEY,
.active_low = 1,
.wakeup = 1,
.debounce_interval = 1,
}, {
.code = KEY_BACK,
.gpio = EXYNOS4_GPX1(7),
.desc = "gpio-keys: KEY_BACK",
.type = EV_KEY,
.active_low = 1,
.wakeup = 1,
.debounce_interval = 1,
}, {
.code = KEY_UP,
.gpio = EXYNOS4_GPX2(0),
.desc = "gpio-keys: KEY_UP",
.type = EV_KEY,
.active_low = 1,
.wakeup = 1,
.debounce_interval = 1,
}, {
.code = KEY_DOWN,
.gpio = EXYNOS4_GPX2(1),
.desc = "gpio-keys: KEY_DOWN",
.type = EV_KEY,
.active_low = 1,
.wakeup = 1,
.debounce_interval = 1,
},
};
static struct gpio_keys_platform_data origen_gpio_keys_data = {
.buttons = origen_gpio_keys_table,
.nbuttons = ARRAY_SIZE(origen_gpio_keys_table),
};
static struct platform_device origen_device_gpiokeys = {
.name = "gpio-keys",
.dev = {
.platform_data = &origen_gpio_keys_data,
},
};
static void lcd_hv070wsa_set_power(struct plat_lcd_data *pd, unsigned int power)
{
int ret;
if (power)
ret = gpio_request_one(EXYNOS4_GPE3(4),
GPIOF_OUT_INIT_HIGH, "GPE3_4");
else
ret = gpio_request_one(EXYNOS4_GPE3(4),
GPIOF_OUT_INIT_LOW, "GPE3_4");
gpio_free(EXYNOS4_GPE3(4));
if (ret)
pr_err("failed to request gpio for LCD power: %d\n", ret);
}
static struct plat_lcd_data origen_lcd_hv070wsa_data = {
.set_power = lcd_hv070wsa_set_power,
};
static struct platform_device origen_lcd_hv070wsa = {
.name = "platform-lcd",
.dev.parent = &s5p_device_fimd0.dev,
.dev.platform_data = &origen_lcd_hv070wsa_data,
};
static struct s3c_fb_pd_win origen_fb_win0 = {
.win_mode = {
.left_margin = 64,
.right_margin = 16,
.upper_margin = 64,
.lower_margin = 16,
.hsync_len = 48,
.vsync_len = 3,
.xres = 1024,
.yres = 600,
},
.max_bpp = 32,
.default_bpp = 24,
};
static struct s3c_fb_platdata origen_lcd_pdata __initdata = {
.win[0] = &origen_fb_win0,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
VIDCON1_INV_VCLK,
.setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
};
/* Bluetooth rfkill gpio platform data */
struct rfkill_gpio_platform_data origen_bt_pdata = {
.reset_gpio = EXYNOS4_GPX2(2),
.shutdown_gpio = -1,
.type = RFKILL_TYPE_BLUETOOTH,
.name = "origen-bt",
};
/* Bluetooth Platform device */
static struct platform_device origen_device_bluetooth = {
.name = "rfkill_gpio",
.id = -1,
.dev = {
.platform_data = &origen_bt_pdata,
},
};
static struct platform_device *origen_devices[] __initdata = {
&s3c_device_hsmmc2,
&s3c_device_hsmmc0,
&s3c_device_i2c0,
&s3c_device_rtc,
&s3c_device_wdt,
&s5p_device_ehci,
&s5p_device_fimc0,
&s5p_device_fimc1,
&s5p_device_fimc2,
&s5p_device_fimc3,
&s5p_device_fimc_md,
&s5p_device_fimd0,
&s5p_device_g2d,
&s5p_device_hdmi,
&s5p_device_i2c_hdmiphy,
&s5p_device_jpeg,
&s5p_device_mfc,
&s5p_device_mfc_l,
&s5p_device_mfc_r,
&s5p_device_mixer,
&exynos4_device_ohci,
&origen_device_gpiokeys,
&origen_lcd_hv070wsa,
&origen_device_bluetooth,
};
/* LCD Backlight data */
static struct samsung_bl_gpio_info origen_bl_gpio_info = {
.no = EXYNOS4_GPD0(0),
.func = S3C_GPIO_SFN(2),
};
static struct platform_pwm_backlight_data origen_bl_data = {
.pwm_id = 0,
.pwm_period_ns = 1000,
};
static void __init origen_bt_setup(void)
{
gpio_request(EXYNOS4_GPA0(0), "GPIO BT_UART");
/* 4 UART Pins configuration */
s3c_gpio_cfgrange_nopull(EXYNOS4_GPA0(0), 4, S3C_GPIO_SFN(2));
/* Setup BT Reset, this gpio will be requesed by rfkill-gpio */
s3c_gpio_cfgpin(EXYNOS4_GPX2(2), S3C_GPIO_OUTPUT);
s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE);
}
static void s5p_tv_setup(void)
{
/* Direct HPD to HDMI chip */
gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug");
s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
}
static void __init origen_map_io(void)
{
exynos_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
}
static void __init origen_power_init(void)
{
gpio_request(EXYNOS4_GPX0(4), "PMIC_IRQ");
s3c_gpio_cfgpin(EXYNOS4_GPX0(4), S3C_GPIO_SFN(0xf));
s3c_gpio_setpull(EXYNOS4_GPX0(4), S3C_GPIO_PULL_NONE);
}
static void __init origen_reserve(void)
{
s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
}
static void __init origen_machine_init(void)
{
origen_power_init();
s3c_i2c0_set_platdata(NULL);
i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
/*
* Since sdhci instance 2 can contain a bootable media,
* sdhci instance 0 is registered after instance 2.
*/
s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata);
origen_ehci_init();
origen_ohci_init();
clk_xusbxti.rate = 24000000;
s5p_tv_setup();
s5p_i2c_hdmiphy_set_platdata(NULL);
s5p_fimd0_set_platdata(&origen_lcd_pdata);
platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);
origen_bt_setup();
}
MACHINE_START(ORIGEN, "ORIGEN")
/* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */
.atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = origen_map_io,
.handle_irq = gic_handle_irq,
.init_machine = origen_machine_init,
.timer = &exynos4_timer,
.reserve = &origen_reserve,
.restart = exynos4_restart,
MACHINE_END
Reference in New Issue View Git Blame Copy Permalink