forked from Minki/linux
72c0bc66ca
In cases where GuC generate logs at a very high rate, correspondingly the rate of flush interrupts is also very high. So far total 8 pages were allocated for storing both ISR & DPC logs. As per the half-full draining protocol followed by GuC, by doubling the number of pages, the frequency of flush interrupts can be cut down to almost half, which then helps in reducing the logging overhead. So now allocating 8 pages apiece for ISR & DPC logs. This also helps in reducing the output log file size, apart from reducing the flush interrupt count. With the original settings, 44 KB was needed for one snapshot. With modified settings, 76 KB is needed for a snapshot which will be equivalent to 2 snapshots of the original setting. So 12KB saving, every 88 KB, over the original setting. Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Akash Goel <akash.goel@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
531 lines
15 KiB
C
531 lines
15 KiB
C
/*
|
|
* Copyright © 2014 Intel Corporation
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
* copy of this software and associated documentation files (the "Software"),
|
|
* to deal in the Software without restriction, including without limitation
|
|
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
* and/or sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice (including the next
|
|
* paragraph) shall be included in all copies or substantial portions of the
|
|
* Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
|
|
* IN THE SOFTWARE.
|
|
*/
|
|
#ifndef _INTEL_GUC_FWIF_H
|
|
#define _INTEL_GUC_FWIF_H
|
|
|
|
/*
|
|
* This file is partially autogenerated, although currently with some manual
|
|
* fixups afterwards. In future, it should be entirely autogenerated, in order
|
|
* to ensure that the definitions herein remain in sync with those used by the
|
|
* GuC's own firmware.
|
|
*
|
|
* EDITING THIS FILE IS THEREFORE NOT RECOMMENDED - YOUR CHANGES MAY BE LOST.
|
|
*/
|
|
|
|
#define GFXCORE_FAMILY_GEN9 12
|
|
#define GFXCORE_FAMILY_UNKNOWN 0x7fffffff
|
|
|
|
#define GUC_CTX_PRIORITY_KMD_HIGH 0
|
|
#define GUC_CTX_PRIORITY_HIGH 1
|
|
#define GUC_CTX_PRIORITY_KMD_NORMAL 2
|
|
#define GUC_CTX_PRIORITY_NORMAL 3
|
|
#define GUC_CTX_PRIORITY_NUM 4
|
|
|
|
#define GUC_MAX_GPU_CONTEXTS 1024
|
|
#define GUC_INVALID_CTX_ID GUC_MAX_GPU_CONTEXTS
|
|
|
|
#define GUC_RENDER_ENGINE 0
|
|
#define GUC_VIDEO_ENGINE 1
|
|
#define GUC_BLITTER_ENGINE 2
|
|
#define GUC_VIDEOENHANCE_ENGINE 3
|
|
#define GUC_VIDEO_ENGINE2 4
|
|
#define GUC_MAX_ENGINES_NUM (GUC_VIDEO_ENGINE2 + 1)
|
|
|
|
/* Work queue item header definitions */
|
|
#define WQ_STATUS_ACTIVE 1
|
|
#define WQ_STATUS_SUSPENDED 2
|
|
#define WQ_STATUS_CMD_ERROR 3
|
|
#define WQ_STATUS_ENGINE_ID_NOT_USED 4
|
|
#define WQ_STATUS_SUSPENDED_FROM_RESET 5
|
|
#define WQ_TYPE_SHIFT 0
|
|
#define WQ_TYPE_BATCH_BUF (0x1 << WQ_TYPE_SHIFT)
|
|
#define WQ_TYPE_PSEUDO (0x2 << WQ_TYPE_SHIFT)
|
|
#define WQ_TYPE_INORDER (0x3 << WQ_TYPE_SHIFT)
|
|
#define WQ_TARGET_SHIFT 10
|
|
#define WQ_LEN_SHIFT 16
|
|
#define WQ_NO_WCFLUSH_WAIT (1 << 27)
|
|
#define WQ_PRESENT_WORKLOAD (1 << 28)
|
|
#define WQ_WORKLOAD_SHIFT 29
|
|
#define WQ_WORKLOAD_GENERAL (0 << WQ_WORKLOAD_SHIFT)
|
|
#define WQ_WORKLOAD_GPGPU (1 << WQ_WORKLOAD_SHIFT)
|
|
#define WQ_WORKLOAD_TOUCH (2 << WQ_WORKLOAD_SHIFT)
|
|
|
|
#define WQ_RING_TAIL_SHIFT 20
|
|
#define WQ_RING_TAIL_MAX 0x7FF /* 2^11 QWords */
|
|
#define WQ_RING_TAIL_MASK (WQ_RING_TAIL_MAX << WQ_RING_TAIL_SHIFT)
|
|
|
|
#define GUC_DOORBELL_ENABLED 1
|
|
#define GUC_DOORBELL_DISABLED 0
|
|
|
|
#define GUC_CTX_DESC_ATTR_ACTIVE (1 << 0)
|
|
#define GUC_CTX_DESC_ATTR_PENDING_DB (1 << 1)
|
|
#define GUC_CTX_DESC_ATTR_KERNEL (1 << 2)
|
|
#define GUC_CTX_DESC_ATTR_PREEMPT (1 << 3)
|
|
#define GUC_CTX_DESC_ATTR_RESET (1 << 4)
|
|
#define GUC_CTX_DESC_ATTR_WQLOCKED (1 << 5)
|
|
#define GUC_CTX_DESC_ATTR_PCH (1 << 6)
|
|
#define GUC_CTX_DESC_ATTR_TERMINATED (1 << 7)
|
|
|
|
/* The guc control data is 10 DWORDs */
|
|
#define GUC_CTL_CTXINFO 0
|
|
#define GUC_CTL_CTXNUM_IN16_SHIFT 0
|
|
#define GUC_CTL_BASE_ADDR_SHIFT 12
|
|
|
|
#define GUC_CTL_ARAT_HIGH 1
|
|
#define GUC_CTL_ARAT_LOW 2
|
|
|
|
#define GUC_CTL_DEVICE_INFO 3
|
|
#define GUC_CTL_GTTYPE_SHIFT 0
|
|
#define GUC_CTL_COREFAMILY_SHIFT 7
|
|
|
|
#define GUC_CTL_LOG_PARAMS 4
|
|
#define GUC_LOG_VALID (1 << 0)
|
|
#define GUC_LOG_NOTIFY_ON_HALF_FULL (1 << 1)
|
|
#define GUC_LOG_ALLOC_IN_MEGABYTE (1 << 3)
|
|
#define GUC_LOG_CRASH_PAGES 1
|
|
#define GUC_LOG_CRASH_SHIFT 4
|
|
#define GUC_LOG_DPC_PAGES 7
|
|
#define GUC_LOG_DPC_SHIFT 6
|
|
#define GUC_LOG_ISR_PAGES 7
|
|
#define GUC_LOG_ISR_SHIFT 9
|
|
#define GUC_LOG_BUF_ADDR_SHIFT 12
|
|
|
|
#define GUC_CTL_PAGE_FAULT_CONTROL 5
|
|
|
|
#define GUC_CTL_WA 6
|
|
#define GUC_CTL_WA_UK_BY_DRIVER (1 << 3)
|
|
|
|
#define GUC_CTL_FEATURE 7
|
|
#define GUC_CTL_VCS2_ENABLED (1 << 0)
|
|
#define GUC_CTL_KERNEL_SUBMISSIONS (1 << 1)
|
|
#define GUC_CTL_FEATURE2 (1 << 2)
|
|
#define GUC_CTL_POWER_GATING (1 << 3)
|
|
#define GUC_CTL_DISABLE_SCHEDULER (1 << 4)
|
|
#define GUC_CTL_PREEMPTION_LOG (1 << 5)
|
|
#define GUC_CTL_ENABLE_SLPC (1 << 7)
|
|
#define GUC_CTL_RESET_ON_PREMPT_FAILURE (1 << 8)
|
|
|
|
#define GUC_CTL_DEBUG 8
|
|
#define GUC_LOG_VERBOSITY_SHIFT 0
|
|
#define GUC_LOG_VERBOSITY_LOW (0 << GUC_LOG_VERBOSITY_SHIFT)
|
|
#define GUC_LOG_VERBOSITY_MED (1 << GUC_LOG_VERBOSITY_SHIFT)
|
|
#define GUC_LOG_VERBOSITY_HIGH (2 << GUC_LOG_VERBOSITY_SHIFT)
|
|
#define GUC_LOG_VERBOSITY_ULTRA (3 << GUC_LOG_VERBOSITY_SHIFT)
|
|
/* Verbosity range-check limits, without the shift */
|
|
#define GUC_LOG_VERBOSITY_MIN 0
|
|
#define GUC_LOG_VERBOSITY_MAX 3
|
|
#define GUC_LOG_VERBOSITY_MASK 0x0000000f
|
|
#define GUC_LOG_DESTINATION_MASK (3 << 4)
|
|
#define GUC_LOG_DISABLED (1 << 6)
|
|
#define GUC_PROFILE_ENABLED (1 << 7)
|
|
#define GUC_WQ_TRACK_ENABLED (1 << 8)
|
|
#define GUC_ADS_ENABLED (1 << 9)
|
|
#define GUC_DEBUG_RESERVED (1 << 10)
|
|
#define GUC_ADS_ADDR_SHIFT 11
|
|
#define GUC_ADS_ADDR_MASK 0xfffff800
|
|
|
|
#define GUC_CTL_RSRVD 9
|
|
|
|
#define GUC_CTL_MAX_DWORDS (SOFT_SCRATCH_COUNT - 2) /* [1..14] */
|
|
|
|
/**
|
|
* DOC: GuC Firmware Layout
|
|
*
|
|
* The GuC firmware layout looks like this:
|
|
*
|
|
* +-------------------------------+
|
|
* | guc_css_header |
|
|
* | |
|
|
* | contains major/minor version |
|
|
* +-------------------------------+
|
|
* | uCode |
|
|
* +-------------------------------+
|
|
* | RSA signature |
|
|
* +-------------------------------+
|
|
* | modulus key |
|
|
* +-------------------------------+
|
|
* | exponent val |
|
|
* +-------------------------------+
|
|
*
|
|
* The firmware may or may not have modulus key and exponent data. The header,
|
|
* uCode and RSA signature are must-have components that will be used by driver.
|
|
* Length of each components, which is all in dwords, can be found in header.
|
|
* In the case that modulus and exponent are not present in fw, a.k.a truncated
|
|
* image, the length value still appears in header.
|
|
*
|
|
* Driver will do some basic fw size validation based on the following rules:
|
|
*
|
|
* 1. Header, uCode and RSA are must-have components.
|
|
* 2. All firmware components, if they present, are in the sequence illustrated
|
|
* in the layout table above.
|
|
* 3. Length info of each component can be found in header, in dwords.
|
|
* 4. Modulus and exponent key are not required by driver. They may not appear
|
|
* in fw. So driver will load a truncated firmware in this case.
|
|
*/
|
|
|
|
struct guc_css_header {
|
|
uint32_t module_type;
|
|
/* header_size includes all non-uCode bits, including css_header, rsa
|
|
* key, modulus key and exponent data. */
|
|
uint32_t header_size_dw;
|
|
uint32_t header_version;
|
|
uint32_t module_id;
|
|
uint32_t module_vendor;
|
|
union {
|
|
struct {
|
|
uint8_t day;
|
|
uint8_t month;
|
|
uint16_t year;
|
|
};
|
|
uint32_t date;
|
|
};
|
|
uint32_t size_dw; /* uCode plus header_size_dw */
|
|
uint32_t key_size_dw;
|
|
uint32_t modulus_size_dw;
|
|
uint32_t exponent_size_dw;
|
|
union {
|
|
struct {
|
|
uint8_t hour;
|
|
uint8_t min;
|
|
uint16_t sec;
|
|
};
|
|
uint32_t time;
|
|
};
|
|
|
|
char username[8];
|
|
char buildnumber[12];
|
|
uint32_t device_id;
|
|
uint32_t guc_sw_version;
|
|
uint32_t prod_preprod_fw;
|
|
uint32_t reserved[12];
|
|
uint32_t header_info;
|
|
} __packed;
|
|
|
|
struct guc_doorbell_info {
|
|
u32 db_status;
|
|
u32 cookie;
|
|
u32 reserved[14];
|
|
} __packed;
|
|
|
|
union guc_doorbell_qw {
|
|
struct {
|
|
u32 db_status;
|
|
u32 cookie;
|
|
};
|
|
u64 value_qw;
|
|
} __packed;
|
|
|
|
#define GUC_MAX_DOORBELLS 256
|
|
#define GUC_INVALID_DOORBELL_ID (GUC_MAX_DOORBELLS)
|
|
|
|
#define GUC_DB_SIZE (PAGE_SIZE)
|
|
#define GUC_WQ_SIZE (PAGE_SIZE * 2)
|
|
|
|
/* Work item for submitting workloads into work queue of GuC. */
|
|
struct guc_wq_item {
|
|
u32 header;
|
|
u32 context_desc;
|
|
u32 ring_tail;
|
|
u32 fence_id;
|
|
} __packed;
|
|
|
|
struct guc_process_desc {
|
|
u32 context_id;
|
|
u64 db_base_addr;
|
|
u32 head;
|
|
u32 tail;
|
|
u32 error_offset;
|
|
u64 wq_base_addr;
|
|
u32 wq_size_bytes;
|
|
u32 wq_status;
|
|
u32 engine_presence;
|
|
u32 priority;
|
|
u32 reserved[30];
|
|
} __packed;
|
|
|
|
/* engine id and context id is packed into guc_execlist_context.context_id*/
|
|
#define GUC_ELC_CTXID_OFFSET 0
|
|
#define GUC_ELC_ENGINE_OFFSET 29
|
|
|
|
/* The execlist context including software and HW information */
|
|
struct guc_execlist_context {
|
|
u32 context_desc;
|
|
u32 context_id;
|
|
u32 ring_status;
|
|
u32 ring_lcra;
|
|
u32 ring_begin;
|
|
u32 ring_end;
|
|
u32 ring_next_free_location;
|
|
u32 ring_current_tail_pointer_value;
|
|
u8 engine_state_submit_value;
|
|
u8 engine_state_wait_value;
|
|
u16 pagefault_count;
|
|
u16 engine_submit_queue_count;
|
|
} __packed;
|
|
|
|
/*Context descriptor for communicating between uKernel and Driver*/
|
|
struct guc_context_desc {
|
|
u32 sched_common_area;
|
|
u32 context_id;
|
|
u32 pas_id;
|
|
u8 engines_used;
|
|
u64 db_trigger_cpu;
|
|
u32 db_trigger_uk;
|
|
u64 db_trigger_phy;
|
|
u16 db_id;
|
|
|
|
struct guc_execlist_context lrc[GUC_MAX_ENGINES_NUM];
|
|
|
|
u8 attribute;
|
|
|
|
u32 priority;
|
|
|
|
u32 wq_sampled_tail_offset;
|
|
u32 wq_total_submit_enqueues;
|
|
|
|
u32 process_desc;
|
|
u32 wq_addr;
|
|
u32 wq_size;
|
|
|
|
u32 engine_presence;
|
|
|
|
u8 engine_suspended;
|
|
|
|
u8 reserved0[3];
|
|
u64 reserved1[1];
|
|
|
|
u64 desc_private;
|
|
} __packed;
|
|
|
|
#define GUC_FORCEWAKE_RENDER (1 << 0)
|
|
#define GUC_FORCEWAKE_MEDIA (1 << 1)
|
|
|
|
#define GUC_POWER_UNSPECIFIED 0
|
|
#define GUC_POWER_D0 1
|
|
#define GUC_POWER_D1 2
|
|
#define GUC_POWER_D2 3
|
|
#define GUC_POWER_D3 4
|
|
|
|
/* Scheduling policy settings */
|
|
|
|
/* Reset engine upon preempt failure */
|
|
#define POLICY_RESET_ENGINE (1<<0)
|
|
/* Preempt to idle on quantum expiry */
|
|
#define POLICY_PREEMPT_TO_IDLE (1<<1)
|
|
|
|
#define POLICY_MAX_NUM_WI 15
|
|
|
|
struct guc_policy {
|
|
/* Time for one workload to execute. (in micro seconds) */
|
|
u32 execution_quantum;
|
|
u32 reserved1;
|
|
|
|
/* Time to wait for a preemption request to completed before issuing a
|
|
* reset. (in micro seconds). */
|
|
u32 preemption_time;
|
|
|
|
/* How much time to allow to run after the first fault is observed.
|
|
* Then preempt afterwards. (in micro seconds) */
|
|
u32 fault_time;
|
|
|
|
u32 policy_flags;
|
|
u32 reserved[2];
|
|
} __packed;
|
|
|
|
struct guc_policies {
|
|
struct guc_policy policy[GUC_CTX_PRIORITY_NUM][GUC_MAX_ENGINES_NUM];
|
|
|
|
/* In micro seconds. How much time to allow before DPC processing is
|
|
* called back via interrupt (to prevent DPC queue drain starving).
|
|
* Typically 1000s of micro seconds (example only, not granularity). */
|
|
u32 dpc_promote_time;
|
|
|
|
/* Must be set to take these new values. */
|
|
u32 is_valid;
|
|
|
|
/* Max number of WIs to process per call. A large value may keep CS
|
|
* idle. */
|
|
u32 max_num_work_items;
|
|
|
|
u32 reserved[19];
|
|
} __packed;
|
|
|
|
/* GuC MMIO reg state struct */
|
|
|
|
#define GUC_REGSET_FLAGS_NONE 0x0
|
|
#define GUC_REGSET_POWERCYCLE 0x1
|
|
#define GUC_REGSET_MASKED 0x2
|
|
#define GUC_REGSET_ENGINERESET 0x4
|
|
#define GUC_REGSET_SAVE_DEFAULT_VALUE 0x8
|
|
#define GUC_REGSET_SAVE_CURRENT_VALUE 0x10
|
|
|
|
#define GUC_REGSET_MAX_REGISTERS 25
|
|
#define GUC_MMIO_WHITE_LIST_START 0x24d0
|
|
#define GUC_MMIO_WHITE_LIST_MAX 12
|
|
#define GUC_S3_SAVE_SPACE_PAGES 10
|
|
|
|
struct guc_mmio_regset {
|
|
struct __packed {
|
|
u32 offset;
|
|
u32 value;
|
|
u32 flags;
|
|
} registers[GUC_REGSET_MAX_REGISTERS];
|
|
|
|
u32 values_valid;
|
|
u32 number_of_registers;
|
|
} __packed;
|
|
|
|
struct guc_mmio_reg_state {
|
|
struct guc_mmio_regset global_reg;
|
|
struct guc_mmio_regset engine_reg[GUC_MAX_ENGINES_NUM];
|
|
|
|
/* MMIO registers that are set as non privileged */
|
|
struct __packed {
|
|
u32 mmio_start;
|
|
u32 offsets[GUC_MMIO_WHITE_LIST_MAX];
|
|
u32 count;
|
|
} mmio_white_list[GUC_MAX_ENGINES_NUM];
|
|
} __packed;
|
|
|
|
/* GuC Additional Data Struct */
|
|
|
|
struct guc_ads {
|
|
u32 reg_state_addr;
|
|
u32 reg_state_buffer;
|
|
u32 golden_context_lrca;
|
|
u32 scheduler_policies;
|
|
u32 reserved0[3];
|
|
u32 eng_state_size[GUC_MAX_ENGINES_NUM];
|
|
u32 reserved2[4];
|
|
} __packed;
|
|
|
|
/* GuC logging structures */
|
|
|
|
enum guc_log_buffer_type {
|
|
GUC_ISR_LOG_BUFFER,
|
|
GUC_DPC_LOG_BUFFER,
|
|
GUC_CRASH_DUMP_LOG_BUFFER,
|
|
GUC_MAX_LOG_BUFFER
|
|
};
|
|
|
|
/**
|
|
* DOC: GuC Log buffer Layout
|
|
*
|
|
* Page0 +-------------------------------+
|
|
* | ISR state header (32 bytes) |
|
|
* | DPC state header |
|
|
* | Crash dump state header |
|
|
* Page1 +-------------------------------+
|
|
* | ISR logs |
|
|
* Page9 +-------------------------------+
|
|
* | DPC logs |
|
|
* Page17 +-------------------------------+
|
|
* | Crash Dump logs |
|
|
* +-------------------------------+
|
|
*
|
|
* Below state structure is used for coordination of retrieval of GuC firmware
|
|
* logs. Separate state is maintained for each log buffer type.
|
|
* read_ptr points to the location where i915 read last in log buffer and
|
|
* is read only for GuC firmware. write_ptr is incremented by GuC with number
|
|
* of bytes written for each log entry and is read only for i915.
|
|
* When any type of log buffer becomes half full, GuC sends a flush interrupt.
|
|
* GuC firmware expects that while it is writing to 2nd half of the buffer,
|
|
* first half would get consumed by Host and then get a flush completed
|
|
* acknowledgment from Host, so that it does not end up doing any overwrite
|
|
* causing loss of logs. So when buffer gets half filled & i915 has requested
|
|
* for interrupt, GuC will set flush_to_file field, set the sampled_write_ptr
|
|
* to the value of write_ptr and raise the interrupt.
|
|
* On receiving the interrupt i915 should read the buffer, clear flush_to_file
|
|
* field and also update read_ptr with the value of sample_write_ptr, before
|
|
* sending an acknowledgment to GuC. marker & version fields are for internal
|
|
* usage of GuC and opaque to i915. buffer_full_cnt field is incremented every
|
|
* time GuC detects the log buffer overflow.
|
|
*/
|
|
struct guc_log_buffer_state {
|
|
u32 marker[2];
|
|
u32 read_ptr;
|
|
u32 write_ptr;
|
|
u32 size;
|
|
u32 sampled_write_ptr;
|
|
union {
|
|
struct {
|
|
u32 flush_to_file:1;
|
|
u32 buffer_full_cnt:4;
|
|
u32 reserved:27;
|
|
};
|
|
u32 flags;
|
|
};
|
|
u32 version;
|
|
} __packed;
|
|
|
|
union guc_log_control {
|
|
struct {
|
|
u32 logging_enabled:1;
|
|
u32 reserved1:3;
|
|
u32 verbosity:4;
|
|
u32 reserved2:24;
|
|
};
|
|
u32 value;
|
|
} __packed;
|
|
|
|
/* This Action will be programmed in C180 - SOFT_SCRATCH_O_REG */
|
|
enum host2guc_action {
|
|
HOST2GUC_ACTION_DEFAULT = 0x0,
|
|
HOST2GUC_ACTION_SAMPLE_FORCEWAKE = 0x6,
|
|
HOST2GUC_ACTION_ALLOCATE_DOORBELL = 0x10,
|
|
HOST2GUC_ACTION_DEALLOCATE_DOORBELL = 0x20,
|
|
HOST2GUC_ACTION_LOG_BUFFER_FILE_FLUSH_COMPLETE = 0x30,
|
|
HOST2GUC_ACTION_FORCE_LOG_BUFFER_FLUSH = 0x302,
|
|
HOST2GUC_ACTION_ENTER_S_STATE = 0x501,
|
|
HOST2GUC_ACTION_EXIT_S_STATE = 0x502,
|
|
HOST2GUC_ACTION_SLPC_REQUEST = 0x3003,
|
|
HOST2GUC_ACTION_UK_LOG_ENABLE_LOGGING = 0x0E000,
|
|
HOST2GUC_ACTION_LIMIT
|
|
};
|
|
|
|
/*
|
|
* The GuC sends its response to a command by overwriting the
|
|
* command in SS0. The response is distinguishable from a command
|
|
* by the fact that all the MASK bits are set. The remaining bits
|
|
* give more detail.
|
|
*/
|
|
#define GUC2HOST_RESPONSE_MASK ((u32)0xF0000000)
|
|
#define GUC2HOST_IS_RESPONSE(x) ((u32)(x) >= GUC2HOST_RESPONSE_MASK)
|
|
#define GUC2HOST_STATUS(x) (GUC2HOST_RESPONSE_MASK | (x))
|
|
|
|
/* GUC will return status back to SOFT_SCRATCH_O_REG */
|
|
enum guc2host_status {
|
|
GUC2HOST_STATUS_SUCCESS = GUC2HOST_STATUS(0x0),
|
|
GUC2HOST_STATUS_ALLOCATE_DOORBELL_FAIL = GUC2HOST_STATUS(0x10),
|
|
GUC2HOST_STATUS_DEALLOCATE_DOORBELL_FAIL = GUC2HOST_STATUS(0x20),
|
|
GUC2HOST_STATUS_GENERIC_FAIL = GUC2HOST_STATUS(0x0000F000)
|
|
};
|
|
|
|
/* This action will be programmed in C1BC - SOFT_SCRATCH_15_REG */
|
|
enum guc2host_message {
|
|
GUC2HOST_MSG_CRASH_DUMP_POSTED = (1 << 1),
|
|
GUC2HOST_MSG_FLUSH_LOG_BUFFER = (1 << 3)
|
|
};
|
|
|
|
#endif
|