forked from Minki/linux
0e14235e6c
This patch adds device tree support for imx keypad driver. Signed-off-by: Liu Ying <Ying.Liu@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
651 lines
17 KiB
C
651 lines
17 KiB
C
/*
|
|
* Driver for the IMX keypad port.
|
|
* Copyright (C) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* <<Power management needs to be implemented>>.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/init.h>
|
|
#include <linux/input/matrix_keypad.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/timer.h>
|
|
|
|
/*
|
|
* Keypad Controller registers (halfword)
|
|
*/
|
|
#define KPCR 0x00 /* Keypad Control Register */
|
|
|
|
#define KPSR 0x02 /* Keypad Status Register */
|
|
#define KBD_STAT_KPKD (0x1 << 0) /* Key Press Interrupt Status bit (w1c) */
|
|
#define KBD_STAT_KPKR (0x1 << 1) /* Key Release Interrupt Status bit (w1c) */
|
|
#define KBD_STAT_KDSC (0x1 << 2) /* Key Depress Synch Chain Status bit (w1c)*/
|
|
#define KBD_STAT_KRSS (0x1 << 3) /* Key Release Synch Status bit (w1c)*/
|
|
#define KBD_STAT_KDIE (0x1 << 8) /* Key Depress Interrupt Enable Status bit */
|
|
#define KBD_STAT_KRIE (0x1 << 9) /* Key Release Interrupt Enable */
|
|
#define KBD_STAT_KPPEN (0x1 << 10) /* Keypad Clock Enable */
|
|
|
|
#define KDDR 0x04 /* Keypad Data Direction Register */
|
|
#define KPDR 0x06 /* Keypad Data Register */
|
|
|
|
#define MAX_MATRIX_KEY_ROWS 8
|
|
#define MAX_MATRIX_KEY_COLS 8
|
|
#define MATRIX_ROW_SHIFT 3
|
|
|
|
#define MAX_MATRIX_KEY_NUM (MAX_MATRIX_KEY_ROWS * MAX_MATRIX_KEY_COLS)
|
|
|
|
struct imx_keypad {
|
|
|
|
struct clk *clk;
|
|
struct input_dev *input_dev;
|
|
void __iomem *mmio_base;
|
|
|
|
int irq;
|
|
struct timer_list check_matrix_timer;
|
|
|
|
/*
|
|
* The matrix is stable only if no changes are detected after
|
|
* IMX_KEYPAD_SCANS_FOR_STABILITY scans
|
|
*/
|
|
#define IMX_KEYPAD_SCANS_FOR_STABILITY 3
|
|
int stable_count;
|
|
|
|
bool enabled;
|
|
|
|
/* Masks for enabled rows/cols */
|
|
unsigned short rows_en_mask;
|
|
unsigned short cols_en_mask;
|
|
|
|
unsigned short keycodes[MAX_MATRIX_KEY_NUM];
|
|
|
|
/*
|
|
* Matrix states:
|
|
* -stable: achieved after a complete debounce process.
|
|
* -unstable: used in the debouncing process.
|
|
*/
|
|
unsigned short matrix_stable_state[MAX_MATRIX_KEY_COLS];
|
|
unsigned short matrix_unstable_state[MAX_MATRIX_KEY_COLS];
|
|
};
|
|
|
|
/* Scan the matrix and return the new state in *matrix_volatile_state. */
|
|
static void imx_keypad_scan_matrix(struct imx_keypad *keypad,
|
|
unsigned short *matrix_volatile_state)
|
|
{
|
|
int col;
|
|
unsigned short reg_val;
|
|
|
|
for (col = 0; col < MAX_MATRIX_KEY_COLS; col++) {
|
|
if ((keypad->cols_en_mask & (1 << col)) == 0)
|
|
continue;
|
|
/*
|
|
* Discharge keypad capacitance:
|
|
* 2. write 1s on column data.
|
|
* 3. configure columns as totem-pole to discharge capacitance.
|
|
* 4. configure columns as open-drain.
|
|
*/
|
|
reg_val = readw(keypad->mmio_base + KPDR);
|
|
reg_val |= 0xff00;
|
|
writew(reg_val, keypad->mmio_base + KPDR);
|
|
|
|
reg_val = readw(keypad->mmio_base + KPCR);
|
|
reg_val &= ~((keypad->cols_en_mask & 0xff) << 8);
|
|
writew(reg_val, keypad->mmio_base + KPCR);
|
|
|
|
udelay(2);
|
|
|
|
reg_val = readw(keypad->mmio_base + KPCR);
|
|
reg_val |= (keypad->cols_en_mask & 0xff) << 8;
|
|
writew(reg_val, keypad->mmio_base + KPCR);
|
|
|
|
/*
|
|
* 5. Write a single column to 0, others to 1.
|
|
* 6. Sample row inputs and save data.
|
|
* 7. Repeat steps 2 - 6 for remaining columns.
|
|
*/
|
|
reg_val = readw(keypad->mmio_base + KPDR);
|
|
reg_val &= ~(1 << (8 + col));
|
|
writew(reg_val, keypad->mmio_base + KPDR);
|
|
|
|
/*
|
|
* Delay added to avoid propagating the 0 from column to row
|
|
* when scanning.
|
|
*/
|
|
udelay(5);
|
|
|
|
/*
|
|
* 1s in matrix_volatile_state[col] means key pressures
|
|
* throw data from non enabled rows.
|
|
*/
|
|
reg_val = readw(keypad->mmio_base + KPDR);
|
|
matrix_volatile_state[col] = (~reg_val) & keypad->rows_en_mask;
|
|
}
|
|
|
|
/*
|
|
* Return in standby mode:
|
|
* 9. write 0s to columns
|
|
*/
|
|
reg_val = readw(keypad->mmio_base + KPDR);
|
|
reg_val &= 0x00ff;
|
|
writew(reg_val, keypad->mmio_base + KPDR);
|
|
}
|
|
|
|
/*
|
|
* Compare the new matrix state (volatile) with the stable one stored in
|
|
* keypad->matrix_stable_state and fire events if changes are detected.
|
|
*/
|
|
static void imx_keypad_fire_events(struct imx_keypad *keypad,
|
|
unsigned short *matrix_volatile_state)
|
|
{
|
|
struct input_dev *input_dev = keypad->input_dev;
|
|
int row, col;
|
|
|
|
for (col = 0; col < MAX_MATRIX_KEY_COLS; col++) {
|
|
unsigned short bits_changed;
|
|
int code;
|
|
|
|
if ((keypad->cols_en_mask & (1 << col)) == 0)
|
|
continue; /* Column is not enabled */
|
|
|
|
bits_changed = keypad->matrix_stable_state[col] ^
|
|
matrix_volatile_state[col];
|
|
|
|
if (bits_changed == 0)
|
|
continue; /* Column does not contain changes */
|
|
|
|
for (row = 0; row < MAX_MATRIX_KEY_ROWS; row++) {
|
|
if ((keypad->rows_en_mask & (1 << row)) == 0)
|
|
continue; /* Row is not enabled */
|
|
if ((bits_changed & (1 << row)) == 0)
|
|
continue; /* Row does not contain changes */
|
|
|
|
code = MATRIX_SCAN_CODE(row, col, MATRIX_ROW_SHIFT);
|
|
input_event(input_dev, EV_MSC, MSC_SCAN, code);
|
|
input_report_key(input_dev, keypad->keycodes[code],
|
|
matrix_volatile_state[col] & (1 << row));
|
|
dev_dbg(&input_dev->dev, "Event code: %d, val: %d",
|
|
keypad->keycodes[code],
|
|
matrix_volatile_state[col] & (1 << row));
|
|
}
|
|
}
|
|
input_sync(input_dev);
|
|
}
|
|
|
|
/*
|
|
* imx_keypad_check_for_events is the timer handler.
|
|
*/
|
|
static void imx_keypad_check_for_events(unsigned long data)
|
|
{
|
|
struct imx_keypad *keypad = (struct imx_keypad *) data;
|
|
unsigned short matrix_volatile_state[MAX_MATRIX_KEY_COLS];
|
|
unsigned short reg_val;
|
|
bool state_changed, is_zero_matrix;
|
|
int i;
|
|
|
|
memset(matrix_volatile_state, 0, sizeof(matrix_volatile_state));
|
|
|
|
imx_keypad_scan_matrix(keypad, matrix_volatile_state);
|
|
|
|
state_changed = false;
|
|
for (i = 0; i < MAX_MATRIX_KEY_COLS; i++) {
|
|
if ((keypad->cols_en_mask & (1 << i)) == 0)
|
|
continue;
|
|
|
|
if (keypad->matrix_unstable_state[i] ^ matrix_volatile_state[i]) {
|
|
state_changed = true;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If the matrix state is changed from the previous scan
|
|
* (Re)Begin the debouncing process, saving the new state in
|
|
* keypad->matrix_unstable_state.
|
|
* else
|
|
* Increase the count of number of scans with a stable state.
|
|
*/
|
|
if (state_changed) {
|
|
memcpy(keypad->matrix_unstable_state, matrix_volatile_state,
|
|
sizeof(matrix_volatile_state));
|
|
keypad->stable_count = 0;
|
|
} else
|
|
keypad->stable_count++;
|
|
|
|
/*
|
|
* If the matrix is not as stable as we want reschedule scan
|
|
* in the near future.
|
|
*/
|
|
if (keypad->stable_count < IMX_KEYPAD_SCANS_FOR_STABILITY) {
|
|
mod_timer(&keypad->check_matrix_timer,
|
|
jiffies + msecs_to_jiffies(10));
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* If the matrix state is stable, fire the events and save the new
|
|
* stable state. Note, if the matrix is kept stable for longer
|
|
* (keypad->stable_count > IMX_KEYPAD_SCANS_FOR_STABILITY) all
|
|
* events have already been generated.
|
|
*/
|
|
if (keypad->stable_count == IMX_KEYPAD_SCANS_FOR_STABILITY) {
|
|
imx_keypad_fire_events(keypad, matrix_volatile_state);
|
|
|
|
memcpy(keypad->matrix_stable_state, matrix_volatile_state,
|
|
sizeof(matrix_volatile_state));
|
|
}
|
|
|
|
is_zero_matrix = true;
|
|
for (i = 0; i < MAX_MATRIX_KEY_COLS; i++) {
|
|
if (matrix_volatile_state[i] != 0) {
|
|
is_zero_matrix = false;
|
|
break;
|
|
}
|
|
}
|
|
|
|
|
|
if (is_zero_matrix) {
|
|
/*
|
|
* All keys have been released. Enable only the KDI
|
|
* interrupt for future key presses (clear the KDI
|
|
* status bit and its sync chain before that).
|
|
*/
|
|
reg_val = readw(keypad->mmio_base + KPSR);
|
|
reg_val |= KBD_STAT_KPKD | KBD_STAT_KDSC;
|
|
writew(reg_val, keypad->mmio_base + KPSR);
|
|
|
|
reg_val = readw(keypad->mmio_base + KPSR);
|
|
reg_val |= KBD_STAT_KDIE;
|
|
reg_val &= ~KBD_STAT_KRIE;
|
|
writew(reg_val, keypad->mmio_base + KPSR);
|
|
} else {
|
|
/*
|
|
* Some keys are still pressed. Schedule a rescan in
|
|
* attempt to detect multiple key presses and enable
|
|
* the KRI interrupt to react quickly to key release
|
|
* event.
|
|
*/
|
|
mod_timer(&keypad->check_matrix_timer,
|
|
jiffies + msecs_to_jiffies(60));
|
|
|
|
reg_val = readw(keypad->mmio_base + KPSR);
|
|
reg_val |= KBD_STAT_KPKR | KBD_STAT_KRSS;
|
|
writew(reg_val, keypad->mmio_base + KPSR);
|
|
|
|
reg_val = readw(keypad->mmio_base + KPSR);
|
|
reg_val |= KBD_STAT_KRIE;
|
|
reg_val &= ~KBD_STAT_KDIE;
|
|
writew(reg_val, keypad->mmio_base + KPSR);
|
|
}
|
|
}
|
|
|
|
static irqreturn_t imx_keypad_irq_handler(int irq, void *dev_id)
|
|
{
|
|
struct imx_keypad *keypad = dev_id;
|
|
unsigned short reg_val;
|
|
|
|
reg_val = readw(keypad->mmio_base + KPSR);
|
|
|
|
/* Disable both interrupt types */
|
|
reg_val &= ~(KBD_STAT_KRIE | KBD_STAT_KDIE);
|
|
/* Clear interrupts status bits */
|
|
reg_val |= KBD_STAT_KPKR | KBD_STAT_KPKD;
|
|
writew(reg_val, keypad->mmio_base + KPSR);
|
|
|
|
if (keypad->enabled) {
|
|
/* The matrix is supposed to be changed */
|
|
keypad->stable_count = 0;
|
|
|
|
/* Schedule the scanning procedure near in the future */
|
|
mod_timer(&keypad->check_matrix_timer,
|
|
jiffies + msecs_to_jiffies(2));
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void imx_keypad_config(struct imx_keypad *keypad)
|
|
{
|
|
unsigned short reg_val;
|
|
|
|
/*
|
|
* Include enabled rows in interrupt generation (KPCR[7:0])
|
|
* Configure keypad columns as open-drain (KPCR[15:8])
|
|
*/
|
|
reg_val = readw(keypad->mmio_base + KPCR);
|
|
reg_val |= keypad->rows_en_mask & 0xff; /* rows */
|
|
reg_val |= (keypad->cols_en_mask & 0xff) << 8; /* cols */
|
|
writew(reg_val, keypad->mmio_base + KPCR);
|
|
|
|
/* Write 0's to KPDR[15:8] (Colums) */
|
|
reg_val = readw(keypad->mmio_base + KPDR);
|
|
reg_val &= 0x00ff;
|
|
writew(reg_val, keypad->mmio_base + KPDR);
|
|
|
|
/* Configure columns as output, rows as input (KDDR[15:0]) */
|
|
writew(0xff00, keypad->mmio_base + KDDR);
|
|
|
|
/*
|
|
* Clear Key Depress and Key Release status bit.
|
|
* Clear both synchronizer chain.
|
|
*/
|
|
reg_val = readw(keypad->mmio_base + KPSR);
|
|
reg_val |= KBD_STAT_KPKR | KBD_STAT_KPKD |
|
|
KBD_STAT_KDSC | KBD_STAT_KRSS;
|
|
writew(reg_val, keypad->mmio_base + KPSR);
|
|
|
|
/* Enable KDI and disable KRI (avoid false release events). */
|
|
reg_val |= KBD_STAT_KDIE;
|
|
reg_val &= ~KBD_STAT_KRIE;
|
|
writew(reg_val, keypad->mmio_base + KPSR);
|
|
}
|
|
|
|
static void imx_keypad_inhibit(struct imx_keypad *keypad)
|
|
{
|
|
unsigned short reg_val;
|
|
|
|
/* Inhibit KDI and KRI interrupts. */
|
|
reg_val = readw(keypad->mmio_base + KPSR);
|
|
reg_val &= ~(KBD_STAT_KRIE | KBD_STAT_KDIE);
|
|
reg_val |= KBD_STAT_KPKR | KBD_STAT_KPKD;
|
|
writew(reg_val, keypad->mmio_base + KPSR);
|
|
|
|
/* Colums as open drain and disable all rows */
|
|
reg_val = (keypad->cols_en_mask & 0xff) << 8;
|
|
writew(reg_val, keypad->mmio_base + KPCR);
|
|
}
|
|
|
|
static void imx_keypad_close(struct input_dev *dev)
|
|
{
|
|
struct imx_keypad *keypad = input_get_drvdata(dev);
|
|
|
|
dev_dbg(&dev->dev, ">%s\n", __func__);
|
|
|
|
/* Mark keypad as being inactive */
|
|
keypad->enabled = false;
|
|
synchronize_irq(keypad->irq);
|
|
del_timer_sync(&keypad->check_matrix_timer);
|
|
|
|
imx_keypad_inhibit(keypad);
|
|
|
|
/* Disable clock unit */
|
|
clk_disable_unprepare(keypad->clk);
|
|
}
|
|
|
|
static int imx_keypad_open(struct input_dev *dev)
|
|
{
|
|
struct imx_keypad *keypad = input_get_drvdata(dev);
|
|
int error;
|
|
|
|
dev_dbg(&dev->dev, ">%s\n", __func__);
|
|
|
|
/* Enable the kpp clock */
|
|
error = clk_prepare_enable(keypad->clk);
|
|
if (error)
|
|
return error;
|
|
|
|
/* We became active from now */
|
|
keypad->enabled = true;
|
|
|
|
imx_keypad_config(keypad);
|
|
|
|
/* Sanity control, not all the rows must be actived now. */
|
|
if ((readw(keypad->mmio_base + KPDR) & keypad->rows_en_mask) == 0) {
|
|
dev_err(&dev->dev,
|
|
"too many keys pressed, control pins initialisation\n");
|
|
goto open_err;
|
|
}
|
|
|
|
return 0;
|
|
|
|
open_err:
|
|
imx_keypad_close(dev);
|
|
return -EIO;
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static struct of_device_id imx_keypad_of_match[] = {
|
|
{ .compatible = "fsl,imx21-kpp", },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, imx_keypad_of_match);
|
|
#endif
|
|
|
|
static int imx_keypad_probe(struct platform_device *pdev)
|
|
{
|
|
const struct matrix_keymap_data *keymap_data = pdev->dev.platform_data;
|
|
struct imx_keypad *keypad;
|
|
struct input_dev *input_dev;
|
|
struct resource *res;
|
|
int irq, error, i, row, col;
|
|
|
|
if (!keymap_data && !pdev->dev.of_node) {
|
|
dev_err(&pdev->dev, "no keymap defined\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
dev_err(&pdev->dev, "no irq defined in platform data\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (res == NULL) {
|
|
dev_err(&pdev->dev, "no I/O memory defined in platform data\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
res = request_mem_region(res->start, resource_size(res), pdev->name);
|
|
if (res == NULL) {
|
|
dev_err(&pdev->dev, "failed to request I/O memory\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
input_dev = input_allocate_device();
|
|
if (!input_dev) {
|
|
dev_err(&pdev->dev, "failed to allocate the input device\n");
|
|
error = -ENOMEM;
|
|
goto failed_rel_mem;
|
|
}
|
|
|
|
keypad = kzalloc(sizeof(struct imx_keypad), GFP_KERNEL);
|
|
if (!keypad) {
|
|
dev_err(&pdev->dev, "not enough memory for driver data\n");
|
|
error = -ENOMEM;
|
|
goto failed_free_input;
|
|
}
|
|
|
|
keypad->input_dev = input_dev;
|
|
keypad->irq = irq;
|
|
keypad->stable_count = 0;
|
|
|
|
setup_timer(&keypad->check_matrix_timer,
|
|
imx_keypad_check_for_events, (unsigned long) keypad);
|
|
|
|
keypad->mmio_base = ioremap(res->start, resource_size(res));
|
|
if (keypad->mmio_base == NULL) {
|
|
dev_err(&pdev->dev, "failed to remap I/O memory\n");
|
|
error = -ENOMEM;
|
|
goto failed_free_priv;
|
|
}
|
|
|
|
keypad->clk = clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(keypad->clk)) {
|
|
dev_err(&pdev->dev, "failed to get keypad clock\n");
|
|
error = PTR_ERR(keypad->clk);
|
|
goto failed_unmap;
|
|
}
|
|
|
|
/* Init the Input device */
|
|
input_dev->name = pdev->name;
|
|
input_dev->id.bustype = BUS_HOST;
|
|
input_dev->dev.parent = &pdev->dev;
|
|
input_dev->open = imx_keypad_open;
|
|
input_dev->close = imx_keypad_close;
|
|
|
|
error = matrix_keypad_build_keymap(keymap_data, NULL,
|
|
MAX_MATRIX_KEY_ROWS,
|
|
MAX_MATRIX_KEY_COLS,
|
|
keypad->keycodes, input_dev);
|
|
if (error) {
|
|
dev_err(&pdev->dev, "failed to build keymap\n");
|
|
goto failed_clock_put;
|
|
}
|
|
|
|
/* Search for rows and cols enabled */
|
|
for (row = 0; row < MAX_MATRIX_KEY_ROWS; row++) {
|
|
for (col = 0; col < MAX_MATRIX_KEY_COLS; col++) {
|
|
i = MATRIX_SCAN_CODE(row, col, MATRIX_ROW_SHIFT);
|
|
if (keypad->keycodes[i] != KEY_RESERVED) {
|
|
keypad->rows_en_mask |= 1 << row;
|
|
keypad->cols_en_mask |= 1 << col;
|
|
}
|
|
}
|
|
}
|
|
dev_dbg(&pdev->dev, "enabled rows mask: %x\n", keypad->rows_en_mask);
|
|
dev_dbg(&pdev->dev, "enabled cols mask: %x\n", keypad->cols_en_mask);
|
|
|
|
__set_bit(EV_REP, input_dev->evbit);
|
|
input_set_capability(input_dev, EV_MSC, MSC_SCAN);
|
|
input_set_drvdata(input_dev, keypad);
|
|
|
|
/* Ensure that the keypad will stay dormant until opened */
|
|
clk_prepare_enable(keypad->clk);
|
|
imx_keypad_inhibit(keypad);
|
|
clk_disable_unprepare(keypad->clk);
|
|
|
|
error = request_irq(irq, imx_keypad_irq_handler, 0,
|
|
pdev->name, keypad);
|
|
if (error) {
|
|
dev_err(&pdev->dev, "failed to request IRQ\n");
|
|
goto failed_clock_put;
|
|
}
|
|
|
|
/* Register the input device */
|
|
error = input_register_device(input_dev);
|
|
if (error) {
|
|
dev_err(&pdev->dev, "failed to register input device\n");
|
|
goto failed_free_irq;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, keypad);
|
|
device_init_wakeup(&pdev->dev, 1);
|
|
|
|
return 0;
|
|
|
|
failed_free_irq:
|
|
free_irq(irq, pdev);
|
|
failed_clock_put:
|
|
clk_put(keypad->clk);
|
|
failed_unmap:
|
|
iounmap(keypad->mmio_base);
|
|
failed_free_priv:
|
|
kfree(keypad);
|
|
failed_free_input:
|
|
input_free_device(input_dev);
|
|
failed_rel_mem:
|
|
release_mem_region(res->start, resource_size(res));
|
|
return error;
|
|
}
|
|
|
|
static int imx_keypad_remove(struct platform_device *pdev)
|
|
{
|
|
struct imx_keypad *keypad = platform_get_drvdata(pdev);
|
|
struct resource *res;
|
|
|
|
dev_dbg(&pdev->dev, ">%s\n", __func__);
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
input_unregister_device(keypad->input_dev);
|
|
|
|
free_irq(keypad->irq, keypad);
|
|
clk_put(keypad->clk);
|
|
|
|
iounmap(keypad->mmio_base);
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
release_mem_region(res->start, resource_size(res));
|
|
|
|
kfree(keypad);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int imx_kbd_suspend(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct imx_keypad *kbd = platform_get_drvdata(pdev);
|
|
struct input_dev *input_dev = kbd->input_dev;
|
|
|
|
/* imx kbd can wake up system even clock is disabled */
|
|
mutex_lock(&input_dev->mutex);
|
|
|
|
if (input_dev->users)
|
|
clk_disable_unprepare(kbd->clk);
|
|
|
|
mutex_unlock(&input_dev->mutex);
|
|
|
|
if (device_may_wakeup(&pdev->dev))
|
|
enable_irq_wake(kbd->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx_kbd_resume(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct imx_keypad *kbd = platform_get_drvdata(pdev);
|
|
struct input_dev *input_dev = kbd->input_dev;
|
|
int ret = 0;
|
|
|
|
if (device_may_wakeup(&pdev->dev))
|
|
disable_irq_wake(kbd->irq);
|
|
|
|
mutex_lock(&input_dev->mutex);
|
|
|
|
if (input_dev->users) {
|
|
ret = clk_prepare_enable(kbd->clk);
|
|
if (ret)
|
|
goto err_clk;
|
|
}
|
|
|
|
err_clk:
|
|
mutex_unlock(&input_dev->mutex);
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(imx_kbd_pm_ops, imx_kbd_suspend, imx_kbd_resume);
|
|
|
|
static struct platform_driver imx_keypad_driver = {
|
|
.driver = {
|
|
.name = "imx-keypad",
|
|
.owner = THIS_MODULE,
|
|
.pm = &imx_kbd_pm_ops,
|
|
.of_match_table = of_match_ptr(imx_keypad_of_match),
|
|
},
|
|
.probe = imx_keypad_probe,
|
|
.remove = imx_keypad_remove,
|
|
};
|
|
module_platform_driver(imx_keypad_driver);
|
|
|
|
MODULE_AUTHOR("Alberto Panizzo <maramaopercheseimorto@gmail.com>");
|
|
MODULE_DESCRIPTION("IMX Keypad Port Driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:imx-keypad");
|