forked from Minki/linux
3cd12f9151
Resuming a powered down port sometimes results in the port state being stuck in the training sequence. hub 3-0:1.0: debounce: port 1: total 2000ms stable 0ms status 0x2e0 port1: can't get reconnection after setting port power on, status -110 hub 3-0:1.0: port 1 status 0000.02e0 after resume, -19 usb 3-1: can't resume, status -19 hub 3-0:1.0: logical disconnect on port 1 In the case above we wait for the port re-connect timeout of 2 seconds and observe that the port status is USB_SS_PORT_LS_POLLING (although it is likely toggling between this state and USB_SS_PORT_LS_RX_DETECT). This is indicative of a case where the device is failing to progress the link training state machine. It is resolved by issuing a warm reset to get the hub and device link state machines back in sync. hub 3-0:1.0: debounce: port 1: total 2000ms stable 0ms status 0x2e0 usb usb3: port1 usb_port_runtime_resume requires warm reset hub 3-0:1.0: port 1 not warm reset yet, waiting 50ms usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd After a reconnect timeout when we expect the device to be present, force a warm reset of the device. Note that we can not simply look at the link status to determine if a warm reset is required as any of the training states USB_SS_PORT_LS_POLLING, USB_SS_PORT_LS_RX_DETECT, or USB_SS_PORT_LS_COMP_MOD are valid states that do not indicate the need for warm reset by themselves. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Vincent Palatin <vpalatin@chromium.org> Cc: Lan Tianyu <tianyu.lan@intel.com> Cc: Ksenia Ragiadakou <burzalodowa@gmail.com> Cc: Vivek Gautam <gautam.vivek@samsung.com> Cc: Douglas Anderson <dianders@chromium.org> Cc: Felipe Balbi <balbi@ti.com> Cc: Sunil Joshi <joshi@samsung.com> Cc: Hans de Goede <hdegoede@redhat.com> Acked-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
159 lines
4.7 KiB
C
159 lines
4.7 KiB
C
/*
|
|
* usb hub driver head file
|
|
*
|
|
* Copyright (C) 1999 Linus Torvalds
|
|
* Copyright (C) 1999 Johannes Erdfelt
|
|
* Copyright (C) 1999 Gregory P. Smith
|
|
* Copyright (C) 2001 Brad Hards (bhards@bigpond.net.au)
|
|
* Copyright (C) 2012 Intel Corp (tianyu.lan@intel.com)
|
|
*
|
|
* move struct usb_hub to this file.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
|
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
* for more details.
|
|
*/
|
|
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/ch11.h>
|
|
#include <linux/usb/hcd.h>
|
|
#include "usb.h"
|
|
|
|
struct usb_hub {
|
|
struct device *intfdev; /* the "interface" device */
|
|
struct usb_device *hdev;
|
|
struct kref kref;
|
|
struct urb *urb; /* for interrupt polling pipe */
|
|
|
|
/* buffer for urb ... with extra space in case of babble */
|
|
u8 (*buffer)[8];
|
|
union {
|
|
struct usb_hub_status hub;
|
|
struct usb_port_status port;
|
|
} *status; /* buffer for status reports */
|
|
struct mutex status_mutex; /* for the status buffer */
|
|
|
|
int error; /* last reported error */
|
|
int nerrors; /* track consecutive errors */
|
|
|
|
struct list_head event_list; /* hubs w/data or errs ready */
|
|
unsigned long event_bits[1]; /* status change bitmask */
|
|
unsigned long change_bits[1]; /* ports with logical connect
|
|
status change */
|
|
unsigned long removed_bits[1]; /* ports with a "removed"
|
|
device present */
|
|
unsigned long wakeup_bits[1]; /* ports that have signaled
|
|
remote wakeup */
|
|
unsigned long power_bits[1]; /* ports that are powered */
|
|
unsigned long child_usage_bits[1]; /* ports powered on for
|
|
children */
|
|
unsigned long warm_reset_bits[1]; /* ports requesting warm
|
|
reset recovery */
|
|
#if USB_MAXCHILDREN > 31 /* 8*sizeof(unsigned long) - 1 */
|
|
#error event_bits[] is too short!
|
|
#endif
|
|
|
|
struct usb_hub_descriptor *descriptor; /* class descriptor */
|
|
struct usb_tt tt; /* Transaction Translator */
|
|
|
|
unsigned mA_per_port; /* current for each child */
|
|
#ifdef CONFIG_PM
|
|
unsigned wakeup_enabled_descendants;
|
|
#endif
|
|
|
|
unsigned limited_power:1;
|
|
unsigned quiescing:1;
|
|
unsigned disconnected:1;
|
|
unsigned in_reset:1;
|
|
|
|
unsigned quirk_check_port_auto_suspend:1;
|
|
|
|
unsigned has_indicators:1;
|
|
u8 indicator[USB_MAXCHILDREN];
|
|
struct delayed_work leds;
|
|
struct delayed_work init_work;
|
|
struct usb_port **ports;
|
|
};
|
|
|
|
/**
|
|
* struct usb port - kernel's representation of a usb port
|
|
* @child: usb device attached to the port
|
|
* @dev: generic device interface
|
|
* @port_owner: port's owner
|
|
* @peer: related usb2 and usb3 ports (share the same connector)
|
|
* @req: default pm qos request for hubs without port power control
|
|
* @connect_type: port's connect type
|
|
* @location: opaque representation of platform connector location
|
|
* @status_lock: synchronize port_event() vs usb_port_{suspend|resume}
|
|
* @portnum: port index num based one
|
|
* @is_superspeed cache super-speed status
|
|
*/
|
|
struct usb_port {
|
|
struct usb_device *child;
|
|
struct device dev;
|
|
struct usb_dev_state *port_owner;
|
|
struct usb_port *peer;
|
|
struct dev_pm_qos_request *req;
|
|
enum usb_port_connect_type connect_type;
|
|
usb_port_location_t location;
|
|
struct mutex status_lock;
|
|
u8 portnum;
|
|
unsigned int is_superspeed:1;
|
|
};
|
|
|
|
#define to_usb_port(_dev) \
|
|
container_of(_dev, struct usb_port, dev)
|
|
|
|
extern int usb_hub_create_port_device(struct usb_hub *hub,
|
|
int port1);
|
|
extern void usb_hub_remove_port_device(struct usb_hub *hub,
|
|
int port1);
|
|
extern int usb_hub_set_port_power(struct usb_device *hdev, struct usb_hub *hub,
|
|
int port1, bool set);
|
|
extern struct usb_hub *usb_hub_to_struct_hub(struct usb_device *hdev);
|
|
extern int hub_port_debounce(struct usb_hub *hub, int port1,
|
|
bool must_be_connected);
|
|
extern int usb_clear_port_feature(struct usb_device *hdev,
|
|
int port1, int feature);
|
|
|
|
static inline bool hub_is_port_power_switchable(struct usb_hub *hub)
|
|
{
|
|
__le16 hcs;
|
|
|
|
if (!hub)
|
|
return false;
|
|
hcs = hub->descriptor->wHubCharacteristics;
|
|
return (le16_to_cpu(hcs) & HUB_CHAR_LPSM) < HUB_CHAR_NO_LPSM;
|
|
}
|
|
|
|
static inline int hub_is_superspeed(struct usb_device *hdev)
|
|
{
|
|
return hdev->descriptor.bDeviceProtocol == USB_HUB_PR_SS;
|
|
}
|
|
|
|
static inline unsigned hub_power_on_good_delay(struct usb_hub *hub)
|
|
{
|
|
unsigned delay = hub->descriptor->bPwrOn2PwrGood * 2;
|
|
|
|
/* Wait at least 100 msec for power to become stable */
|
|
return max(delay, 100U);
|
|
}
|
|
|
|
static inline int hub_port_debounce_be_connected(struct usb_hub *hub,
|
|
int port1)
|
|
{
|
|
return hub_port_debounce(hub, port1, true);
|
|
}
|
|
|
|
static inline int hub_port_debounce_be_stable(struct usb_hub *hub,
|
|
int port1)
|
|
{
|
|
return hub_port_debounce(hub, port1, false);
|
|
}
|
|
|