linux/arch/arm/mach-omap2/board-omap3evm.c
Linus Torvalds 0df0914d41 Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits)
  omap: zoom: host should not pull up wl1271's irq line
  arm: plat-omap: iommu: fix request_mem_region() error path
  OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430
  omap4: mux: Remove duplicate mux modes
  omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag
  omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set
  omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected
  omap4: board-omap4panda: Initialise the serial pads
  omap3: board-3430sdp: Initialise the serial pads
  omap4: board-4430sdp: Initialise the serial pads
  omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init
  omap2+: mux: Remove the use of IDLE flag
  omap2+: Add separate list for dynamic pads to mux
  perf: add OMAP support for the new power events
  OMAP4: Add IVA OPP enteries.
  OMAP4: Update Voltage Rail Values for MPU, IVA and CORE
  OMAP4: Enable 800 MHz and 1 GHz MPU-OPP
  OMAP3+: OPP: Replace voltage values with Macros
  OMAP3: wdtimer: Fix CORE idle transition
  Watchdog: omap_wdt: add fine grain runtime-pm
  ...

Fix up various conflicts in
 - arch/arm/mach-omap2/board-omap3evm.c
 - arch/arm/mach-omap2/clock3xxx_data.c
 - arch/arm/mach-omap2/usb-musb.c
 - arch/arm/plat-omap/include/plat/usb.h
 - drivers/usb/musb/musb_core.h
2011-03-17 19:28:15 -07:00

899 lines
23 KiB
C

/*
* linux/arch/arm/mach-omap2/board-omap3evm.c
*
* Copyright (C) 2008 Texas Instruments
*
* Modified from mach-omap2/board-3430sdp.c
*
* Initial code: Syed Mohammed Khasim
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/input/matrix_keypad.h>
#include <linux/leds.h>
#include <linux/interrupt.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/i2c/twl.h>
#include <linux/usb/otg.h>
#include <linux/smsc911x.h>
#include <linux/wl12xx.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/mmc/host.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/board.h>
#include <plat/usb.h>
#include <plat/common.h>
#include <plat/mcspi.h>
#include <plat/display.h>
#include <plat/panel-generic-dpi.h>
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "hsmmc.h"
#define OMAP3_EVM_TS_GPIO 175
#define OMAP3_EVM_EHCI_VBUS 22
#define OMAP3_EVM_EHCI_SELECT 61
#define OMAP3EVM_ETHR_START 0x2c000000
#define OMAP3EVM_ETHR_SIZE 1024
#define OMAP3EVM_ETHR_ID_REV 0x50
#define OMAP3EVM_ETHR_GPIO_IRQ 176
#define OMAP3EVM_SMSC911X_CS 5
/*
* Eth Reset signal
* 64 = Generation 1 (<=RevD)
* 7 = Generation 2 (>=RevE)
*/
#define OMAP3EVM_GEN1_ETHR_GPIO_RST 64
#define OMAP3EVM_GEN2_ETHR_GPIO_RST 7
static u8 omap3_evm_version;
u8 get_omap3_evm_rev(void)
{
return omap3_evm_version;
}
EXPORT_SYMBOL(get_omap3_evm_rev);
static void __init omap3_evm_get_revision(void)
{
void __iomem *ioaddr;
unsigned int smsc_id;
/* Ethernet PHY ID is stored at ID_REV register */
ioaddr = ioremap_nocache(OMAP3EVM_ETHR_START, SZ_1K);
if (!ioaddr)
return;
smsc_id = readl(ioaddr + OMAP3EVM_ETHR_ID_REV) & 0xFFFF0000;
iounmap(ioaddr);
switch (smsc_id) {
/*SMSC9115 chipset*/
case 0x01150000:
omap3_evm_version = OMAP3EVM_BOARD_GEN_1;
break;
/*SMSC 9220 chipset*/
case 0x92200000:
default:
omap3_evm_version = OMAP3EVM_BOARD_GEN_2;
}
}
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
static struct resource omap3evm_smsc911x_resources[] = {
[0] = {
.start = OMAP3EVM_ETHR_START,
.end = (OMAP3EVM_ETHR_START + OMAP3EVM_ETHR_SIZE - 1),
.flags = IORESOURCE_MEM,
},
[1] = {
.start = OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
.end = OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
.flags = (IORESOURCE_IRQ | IRQF_TRIGGER_LOW),
},
};
static struct smsc911x_platform_config smsc911x_config = {
.phy_interface = PHY_INTERFACE_MODE_MII,
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
.flags = (SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS),
};
static struct platform_device omap3evm_smsc911x_device = {
.name = "smsc911x",
.id = -1,
.num_resources = ARRAY_SIZE(omap3evm_smsc911x_resources),
.resource = &omap3evm_smsc911x_resources[0],
.dev = {
.platform_data = &smsc911x_config,
},
};
static inline void __init omap3evm_init_smsc911x(void)
{
int eth_cs, eth_rst;
struct clk *l3ck;
unsigned int rate;
if (get_omap3_evm_rev() == OMAP3EVM_BOARD_GEN_1)
eth_rst = OMAP3EVM_GEN1_ETHR_GPIO_RST;
else
eth_rst = OMAP3EVM_GEN2_ETHR_GPIO_RST;
eth_cs = OMAP3EVM_SMSC911X_CS;
l3ck = clk_get(NULL, "l3_ck");
if (IS_ERR(l3ck))
rate = 100000000;
else
rate = clk_get_rate(l3ck);
/* Configure ethernet controller reset gpio */
if (cpu_is_omap3430()) {
if (gpio_request(eth_rst, "SMSC911x gpio") < 0) {
pr_err(KERN_ERR "Failed to request %d for smsc911x\n",
eth_rst);
return;
}
if (gpio_direction_output(eth_rst, 1) < 0) {
pr_err(KERN_ERR "Failed to set direction of %d for" \
" smsc911x\n", eth_rst);
return;
}
/* reset pulse to ethernet controller*/
usleep_range(150, 220);
gpio_set_value(eth_rst, 0);
usleep_range(150, 220);
gpio_set_value(eth_rst, 1);
usleep_range(1, 2);
}
if (gpio_request(OMAP3EVM_ETHR_GPIO_IRQ, "SMSC911x irq") < 0) {
printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n",
OMAP3EVM_ETHR_GPIO_IRQ);
return;
}
gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ);
platform_device_register(&omap3evm_smsc911x_device);
}
#else
static inline void __init omap3evm_init_smsc911x(void) { return; }
#endif
/*
* OMAP3EVM LCD Panel control signals
*/
#define OMAP3EVM_LCD_PANEL_LR 2
#define OMAP3EVM_LCD_PANEL_UD 3
#define OMAP3EVM_LCD_PANEL_INI 152
#define OMAP3EVM_LCD_PANEL_ENVDD 153
#define OMAP3EVM_LCD_PANEL_QVGA 154
#define OMAP3EVM_LCD_PANEL_RESB 155
#define OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO 210
#define OMAP3EVM_DVI_PANEL_EN_GPIO 199
static int lcd_enabled;
static int dvi_enabled;
static void __init omap3_evm_display_init(void)
{
int r;
r = gpio_request(OMAP3EVM_LCD_PANEL_RESB, "lcd_panel_resb");
if (r) {
printk(KERN_ERR "failed to get lcd_panel_resb\n");
return;
}
gpio_direction_output(OMAP3EVM_LCD_PANEL_RESB, 1);
r = gpio_request(OMAP3EVM_LCD_PANEL_INI, "lcd_panel_ini");
if (r) {
printk(KERN_ERR "failed to get lcd_panel_ini\n");
goto err_1;
}
gpio_direction_output(OMAP3EVM_LCD_PANEL_INI, 1);
r = gpio_request(OMAP3EVM_LCD_PANEL_QVGA, "lcd_panel_qvga");
if (r) {
printk(KERN_ERR "failed to get lcd_panel_qvga\n");
goto err_2;
}
gpio_direction_output(OMAP3EVM_LCD_PANEL_QVGA, 0);
r = gpio_request(OMAP3EVM_LCD_PANEL_LR, "lcd_panel_lr");
if (r) {
printk(KERN_ERR "failed to get lcd_panel_lr\n");
goto err_3;
}
gpio_direction_output(OMAP3EVM_LCD_PANEL_LR, 1);
r = gpio_request(OMAP3EVM_LCD_PANEL_UD, "lcd_panel_ud");
if (r) {
printk(KERN_ERR "failed to get lcd_panel_ud\n");
goto err_4;
}
gpio_direction_output(OMAP3EVM_LCD_PANEL_UD, 1);
r = gpio_request(OMAP3EVM_LCD_PANEL_ENVDD, "lcd_panel_envdd");
if (r) {
printk(KERN_ERR "failed to get lcd_panel_envdd\n");
goto err_5;
}
gpio_direction_output(OMAP3EVM_LCD_PANEL_ENVDD, 0);
return;
err_5:
gpio_free(OMAP3EVM_LCD_PANEL_UD);
err_4:
gpio_free(OMAP3EVM_LCD_PANEL_LR);
err_3:
gpio_free(OMAP3EVM_LCD_PANEL_QVGA);
err_2:
gpio_free(OMAP3EVM_LCD_PANEL_INI);
err_1:
gpio_free(OMAP3EVM_LCD_PANEL_RESB);
}
static int omap3_evm_enable_lcd(struct omap_dss_device *dssdev)
{
if (dvi_enabled) {
printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
return -EINVAL;
}
gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 0);
if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0);
else
gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
lcd_enabled = 1;
return 0;
}
static void omap3_evm_disable_lcd(struct omap_dss_device *dssdev)
{
gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 1);
if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
else
gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0);
lcd_enabled = 0;
}
static struct omap_dss_device omap3_evm_lcd_device = {
.name = "lcd",
.driver_name = "sharp_ls_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 18,
.platform_enable = omap3_evm_enable_lcd,
.platform_disable = omap3_evm_disable_lcd,
};
static int omap3_evm_enable_tv(struct omap_dss_device *dssdev)
{
return 0;
}
static void omap3_evm_disable_tv(struct omap_dss_device *dssdev)
{
}
static struct omap_dss_device omap3_evm_tv_device = {
.name = "tv",
.driver_name = "venc",
.type = OMAP_DISPLAY_TYPE_VENC,
.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
.platform_enable = omap3_evm_enable_tv,
.platform_disable = omap3_evm_disable_tv,
};
static int omap3_evm_enable_dvi(struct omap_dss_device *dssdev)
{
if (lcd_enabled) {
printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
return -EINVAL;
}
gpio_set_value_cansleep(OMAP3EVM_DVI_PANEL_EN_GPIO, 1);
dvi_enabled = 1;
return 0;
}
static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev)
{
gpio_set_value_cansleep(OMAP3EVM_DVI_PANEL_EN_GPIO, 0);
dvi_enabled = 0;
}
static struct panel_generic_dpi_data dvi_panel = {
.name = "generic",
.platform_enable = omap3_evm_enable_dvi,
.platform_disable = omap3_evm_disable_dvi,
};
static struct omap_dss_device omap3_evm_dvi_device = {
.name = "dvi",
.type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "generic_dpi_panel",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};
static struct omap_dss_device *omap3_evm_dss_devices[] = {
&omap3_evm_lcd_device,
&omap3_evm_tv_device,
&omap3_evm_dvi_device,
};
static struct omap_dss_board_info omap3_evm_dss_data = {
.num_devices = ARRAY_SIZE(omap3_evm_dss_devices),
.devices = omap3_evm_dss_devices,
.default_device = &omap3_evm_lcd_device,
};
static struct regulator_consumer_supply omap3evm_vmmc1_supply = {
.supply = "vmmc",
};
static struct regulator_consumer_supply omap3evm_vsim_supply = {
.supply = "vmmc_aux",
};
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
static struct regulator_init_data omap3evm_vmmc1 = {
.constraints = {
.min_uV = 1850000,
.max_uV = 3150000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &omap3evm_vmmc1_supply,
};
/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
static struct regulator_init_data omap3evm_vsim = {
.constraints = {
.min_uV = 1800000,
.max_uV = 3000000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &omap3evm_vsim_supply,
};
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = 63,
},
#ifdef CONFIG_WL12XX_PLATFORM_DATA
{
.name = "wl1271",
.mmc = 2,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
.gpio_wp = -EINVAL,
.gpio_cd = -EINVAL,
.nonremovable = true,
},
#endif
{} /* Terminator */
};
static struct gpio_led gpio_leds[] = {
{
.name = "omap3evm::ledb",
/* normally not visible (board underside) */
.default_trigger = "default-on",
.gpio = -EINVAL, /* gets replaced */
.active_low = true,
},
};
static struct gpio_led_platform_data gpio_led_info = {
.leds = gpio_leds,
.num_leds = ARRAY_SIZE(gpio_leds),
};
static struct platform_device leds_gpio = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &gpio_led_info,
},
};
static int omap3evm_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
int r;
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
omap_mux_init_gpio(63, OMAP_PIN_INPUT);
mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters */
omap3evm_vmmc1_supply.dev = mmc[0].dev;
omap3evm_vsim_supply.dev = mmc[0].dev;
/*
* Most GPIOs are for USB OTG. Some are mostly sent to
* the P2 connector; notably LEDA for the LCD backlight.
*/
/* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */
r = gpio_request(gpio + TWL4030_GPIO_MAX, "EN_LCD_BKL");
if (!r)
r = gpio_direction_output(gpio + TWL4030_GPIO_MAX,
(get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) ? 1 : 0);
if (r)
printk(KERN_ERR "failed to get/set lcd_bkl gpio\n");
/* gpio + 7 == DVI Enable */
gpio_request(gpio + 7, "EN_DVI");
gpio_direction_output(gpio + 7, 0);
/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
platform_device_register(&leds_gpio);
return 0;
}
static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.setup = omap3evm_twl_gpio_setup,
};
static struct twl4030_usb_data omap3evm_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static uint32_t board_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_DOWN),
KEY(0, 2, KEY_ENTER),
KEY(0, 3, KEY_M),
KEY(1, 0, KEY_RIGHT),
KEY(1, 1, KEY_UP),
KEY(1, 2, KEY_I),
KEY(1, 3, KEY_N),
KEY(2, 0, KEY_A),
KEY(2, 1, KEY_E),
KEY(2, 2, KEY_J),
KEY(2, 3, KEY_O),
KEY(3, 0, KEY_B),
KEY(3, 1, KEY_F),
KEY(3, 2, KEY_K),
KEY(3, 3, KEY_P)
};
static struct matrix_keymap_data board_map_data = {
.keymap = board_keymap,
.keymap_size = ARRAY_SIZE(board_keymap),
};
static struct twl4030_keypad_data omap3evm_kp_data = {
.keymap_data = &board_map_data,
.rows = 4,
.cols = 4,
.rep = 1,
};
static struct twl4030_madc_platform_data omap3evm_madc_data = {
.irq_line = 1,
};
static struct twl4030_codec_audio_data omap3evm_audio_data;
static struct twl4030_codec_data omap3evm_codec_data = {
.audio_mclk = 26000000,
.audio = &omap3evm_audio_data,
};
static struct regulator_consumer_supply omap3_evm_vdda_dac_supply =
REGULATOR_SUPPLY("vdda_dac", "omapdss");
/* VDAC for DSS driving S-Video */
static struct regulator_init_data omap3_evm_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &omap3_evm_vdda_dac_supply,
};
/* VPLL2 for digital video outputs */
static struct regulator_consumer_supply omap3_evm_vpll2_supply =
REGULATOR_SUPPLY("vdds_dsi", "omapdss");
static struct regulator_init_data omap3_evm_vpll2 = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &omap3_evm_vpll2_supply,
};
/* ads7846 on SPI */
static struct regulator_consumer_supply omap3evm_vio_supply =
REGULATOR_SUPPLY("vcc", "spi1.0");
/* VIO for ads7846 */
static struct regulator_init_data omap3evm_vio = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &omap3evm_vio_supply,
};
#ifdef CONFIG_WL12XX_PLATFORM_DATA
#define OMAP3EVM_WLAN_PMENA_GPIO (150)
#define OMAP3EVM_WLAN_IRQ_GPIO (149)
static struct regulator_consumer_supply omap3evm_vmmc2_supply =
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
/* VMMC2 for driving the WL12xx module */
static struct regulator_init_data omap3evm_vmmc2 = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &omap3evm_vmmc2_supply,
};
static struct fixed_voltage_config omap3evm_vwlan = {
.supply_name = "vwl1271",
.microvolts = 1800000, /* 1.80V */
.gpio = OMAP3EVM_WLAN_PMENA_GPIO,
.startup_delay = 70000, /* 70ms */
.enable_high = 1,
.enabled_at_boot = 0,
.init_data = &omap3evm_vmmc2,
};
static struct platform_device omap3evm_wlan_regulator = {
.name = "reg-fixed-voltage",
.id = 1,
.dev = {
.platform_data = &omap3evm_vwlan,
},
};
struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
.irq = OMAP_GPIO_IRQ(OMAP3EVM_WLAN_IRQ_GPIO),
.board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */
};
#endif
static struct twl4030_platform_data omap3evm_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.keypad = &omap3evm_kp_data,
.madc = &omap3evm_madc_data,
.usb = &omap3evm_usb_data,
.gpio = &omap3evm_gpio_data,
.codec = &omap3evm_codec_data,
.vdac = &omap3_evm_vdac,
.vpll2 = &omap3_evm_vpll2,
.vio = &omap3evm_vio,
};
static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = {
{
I2C_BOARD_INFO("twl4030", 0x48),
.flags = I2C_CLIENT_WAKE,
.irq = INT_34XX_SYS_NIRQ,
.platform_data = &omap3evm_twldata,
},
};
static int __init omap3_evm_i2c_init(void)
{
/*
* REVISIT: These entries can be set in omap3evm_twl_data
* after a merge with MFD tree
*/
omap3evm_twldata.vmmc1 = &omap3evm_vmmc1;
omap3evm_twldata.vsim = &omap3evm_vsim;
omap_register_i2c_bus(1, 2600, omap3evm_i2c_boardinfo,
ARRAY_SIZE(omap3evm_i2c_boardinfo));
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
return 0;
}
static void ads7846_dev_init(void)
{
if (gpio_request(OMAP3_EVM_TS_GPIO, "ADS7846 pendown") < 0)
printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
gpio_direction_input(OMAP3_EVM_TS_GPIO);
gpio_set_debounce(OMAP3_EVM_TS_GPIO, 310);
}
static int ads7846_get_pendown_state(void)
{
return !gpio_get_value(OMAP3_EVM_TS_GPIO);
}
static struct ads7846_platform_data ads7846_config = {
.x_max = 0x0fff,
.y_max = 0x0fff,
.x_plate_ohms = 180,
.pressure_max = 255,
.debounce_max = 10,
.debounce_tol = 3,
.debounce_rep = 1,
.get_pendown_state = ads7846_get_pendown_state,
.keep_vref_on = 1,
.settle_delay_usecs = 150,
.wakeup = true,
};
static struct omap2_mcspi_device_config ads7846_mcspi_config = {
.turbo_mode = 0,
.single_channel = 1, /* 0: slave, 1: master */
};
static struct spi_board_info omap3evm_spi_board_info[] = {
[0] = {
.modalias = "ads7846",
.bus_num = 1,
.chip_select = 0,
.max_speed_hz = 1500000,
.controller_data = &ads7846_mcspi_config,
.irq = OMAP_GPIO_IRQ(OMAP3_EVM_TS_GPIO),
.platform_data = &ads7846_config,
},
};
static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
};
static void __init omap3_evm_init_early(void)
{
omap2_init_common_infrastructure();
omap2_init_common_devices(mt46h32m32lf6_sdrc_params, NULL);
}
static struct usbhs_omap_board_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
.phy_reset = true,
/* PHY reset GPIO will be runtime programmed based on EVM version */
.reset_gpio_port[0] = -EINVAL,
.reset_gpio_port[1] = -EINVAL,
.reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux omap35x_board_mux[] __initdata = {
OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP |
OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
OMAP_PIN_OFF_WAKEUPENABLE),
OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
OMAP_PIN_OFF_WAKEUPENABLE),
OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
OMAP_PIN_OFF_NONE),
OMAP3_MUX(GPMC_WAIT2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
OMAP_PIN_OFF_NONE),
#ifdef CONFIG_WL12XX_PLATFORM_DATA
/* WLAN IRQ - GPIO 149 */
OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
/* WLAN POWER ENABLE - GPIO 150 */
OMAP3_MUX(UART1_CTS, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
/* MMC2 SDIO pin muxes for WL12xx */
OMAP3_MUX(SDMMC2_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
OMAP3_MUX(SDMMC2_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
OMAP3_MUX(SDMMC2_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
OMAP3_MUX(SDMMC2_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
OMAP3_MUX(SDMMC2_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
OMAP3_MUX(SDMMC2_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
#endif
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
static struct omap_board_mux omap36x_board_mux[] __initdata = {
OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP |
OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
OMAP_PIN_OFF_WAKEUPENABLE),
OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
OMAP_PIN_OFF_WAKEUPENABLE),
/* AM/DM37x EVM: DSS data bus muxed with sys_boot */
OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
OMAP3_MUX(SYS_BOOT0, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
OMAP3_MUX(SYS_BOOT1, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
OMAP3_MUX(SYS_BOOT3, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
OMAP3_MUX(SYS_BOOT4, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
OMAP3_MUX(SYS_BOOT6, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
#ifdef CONFIG_WL12XX_PLATFORM_DATA
/* WLAN IRQ - GPIO 149 */
OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
/* WLAN POWER ENABLE - GPIO 150 */
OMAP3_MUX(UART1_CTS, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
/* MMC2 SDIO pin muxes for WL12xx */
OMAP3_MUX(SDMMC2_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
OMAP3_MUX(SDMMC2_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
OMAP3_MUX(SDMMC2_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
OMAP3_MUX(SDMMC2_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
OMAP3_MUX(SDMMC2_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
OMAP3_MUX(SDMMC2_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
#endif
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define omap35x_board_mux NULL
#define omap36x_board_mux NULL
#endif
static struct omap_musb_board_data musb_board_data = {
.interface_type = MUSB_INTERFACE_ULPI,
.mode = MUSB_OTG,
.power = 100,
};
static void __init omap3_evm_init(void)
{
omap3_evm_get_revision();
if (cpu_is_omap3630())
omap3_mux_init(omap36x_board_mux, OMAP_PACKAGE_CBB);
else
omap3_mux_init(omap35x_board_mux, OMAP_PACKAGE_CBB);
omap_board_config = omap3_evm_config;
omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
omap3_evm_i2c_init();
omap_display_init(&omap3_evm_dss_data);
spi_register_board_info(omap3evm_spi_board_info,
ARRAY_SIZE(omap3evm_spi_board_info));
omap_serial_init();
/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
usb_nop_xceiv_register();
if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
/* enable EHCI VBUS using GPIO22 */
omap_mux_init_gpio(22, OMAP_PIN_INPUT_PULLUP);
gpio_request(OMAP3_EVM_EHCI_VBUS, "enable EHCI VBUS");
gpio_direction_output(OMAP3_EVM_EHCI_VBUS, 0);
gpio_set_value(OMAP3_EVM_EHCI_VBUS, 1);
/* Select EHCI port on main board */
omap_mux_init_gpio(61, OMAP_PIN_INPUT_PULLUP);
gpio_request(OMAP3_EVM_EHCI_SELECT, "select EHCI port");
gpio_direction_output(OMAP3_EVM_EHCI_SELECT, 0);
gpio_set_value(OMAP3_EVM_EHCI_SELECT, 0);
/* setup EHCI phy reset config */
omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
usbhs_bdata.reset_gpio_port[1] = 21;
/* EVM REV >= E can supply 500mA with EXTVBUS programming */
musb_board_data.power = 500;
musb_board_data.extvbus = 1;
} else {
/* setup EHCI phy reset on MDC */
omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
usbhs_bdata.reset_gpio_port[1] = 135;
}
usb_musb_init(&musb_board_data);
usbhs_init(&usbhs_bdata);
ads7846_dev_init();
omap3evm_init_smsc911x();
omap3_evm_display_init();
#ifdef CONFIG_WL12XX_PLATFORM_DATA
/* WL12xx WLAN Init */
if (wl12xx_set_platform_data(&omap3evm_wlan_data))
pr_err("error setting wl12xx data\n");
platform_device_register(&omap3evm_wlan_regulator);
#endif
}
MACHINE_START(OMAP3EVM, "OMAP3 EVM")
/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
.boot_params = 0x80000100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap3_evm_init_early,
.init_irq = omap_init_irq,
.init_machine = omap3_evm_init,
.timer = &omap_timer,
MACHINE_END