forked from Minki/linux
54c72d5987
- Checkpatch fixes throughout the subsystem
- Use Regmap to handle IRQs in max77686, extcon-max77693 and mc13xxx-core
- Use DMA in rtsx_pcr
- Restrict building on unsupported architectures on timberdale, cs5535
- SPI hardening in cros_ec_spi
- More robust error handing in asic3, cros_ec, ab8500-debugfs,
max77686 and pcf50633-core
- Reorder PM runtime and regulator handing during shutdown in arizona
- Enable wakeup in cros_ec_spi
- Unused variable/code clean-up in pm8921-core, cros_ec, htc-i2cpld,
tps65912-spi, wm5110-tables and ab8500-debugfs
- Add regulator handing into suspend() in sec-core
- Remove pointless wrapper functions in extcon-max77693 and i2c-cros-ec-tunnel
- Use cross-architecture friendly data sizes in stmpe-i2c, arizona,
max77686 and tps65910
- Device Tree documentation updates throughout
- Provide power management support in max77686
- Few OF clean-ups in max77686
- Use manged resources in tps6105x
== New drivers/supported devices ==
- Add support for s2mpu02 to sec-core
- Add support for Allwinner A32 to sun6i-prcm
- Add support for Maxim 77802 in max77686
- Add support for DA9063 AD in da9063
- Add new driver for Intel PMICs (generic) and specifically Crystal Cove
== (Re-)moved drivers ==
- Move out keyboard functionality cros_ec ==> input/keyboard/cros_ec_keyb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2cNI
-----END PGP SIGNATURE-----
Merge tag 'mfd-for-linus-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD update from Lee Jones:
"Changes to existing drivers:
- checkpatch fixes throughout the subsystem
- use Regmap to handle IRQs in max77686, extcon-max77693 and
mc13xxx-core
- use DMA in rtsx_pcr
- restrict building on unsupported architectures on timberdale,
cs5535
- SPI hardening in cros_ec_spi
- more robust error handing in asic3, cros_ec, ab8500-debugfs,
max77686 and pcf50633-core
- reorder PM runtime and regulator handing during shutdown in arizona
- enable wakeup in cros_ec_spi
- unused variable/code clean-up in pm8921-core, cros_ec, htc-i2cpld,
tps65912-spi, wm5110-tables and ab8500-debugfs
- add regulator handing into suspend() in sec-core
- remove pointless wrapper functions in extcon-max77693 and
i2c-cros-ec-tunnel
- use cross-architecture friendly data sizes in stmpe-i2c, arizona,
max77686 and tps65910
- devicetree documentation updates throughout
- provide power management support in max77686
- few OF clean-ups in max77686
- use manged resources in tps6105x
New drivers/supported devices:
- add support for s2mpu02 to sec-core
- add support for Allwinner A32 to sun6i-prcm
- add support for Maxim 77802 in max77686
- add support for DA9063 AD in da9063
- new driver for Intel PMICs (generic) and specifically Crystal Cove
(Re-)moved drivers ==
- move out keyboard functionality cros_ec ==> input/keyboard/cros_ec_keyb"
* tag 'mfd-for-linus-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (101 commits)
MAINTAINERS: Update MFD repo location
mfd: omap-usb-host: Fix improper mask use.
mfd: arizona: Only free the CTRLIF_ERR IRQ if we requested it
mfd: arizona: Add missing handling for ISRC3 under/overclocked
mfd: wm5110: Add new interrupt register definitions
mfd: arizona: Rename thermal shutdown interrupt
mfd: wm5110: Add in the output done interrupts
mfd: wm5110: Remove non-existant interrupts
mfd: tps65912-spi: Remove unused variable
mfd: htc-i2cpld: Remove unused code
mfd: da9063: Add support for AD silicon variant
mfd: arizona: Map MICVDD from extcon device to the Arizona core
mfd: arizona: Add MICVDD to mapped regulators for wm8997
mfd: max77686: Ensure device type IDs are architecture agnostic
mfd: max77686: Add Maxim 77802 PMIC support
mfd: tps6105x: Use managed resources when allocating memory
mfd: wm8997-tables: Suppress 'line over 80 chars' warnings
mfd: kempld-core: Correct a variety of checkpatch warnings
mfd: ipaq-micro: Fix coding style errors/warnings reported by checkpatch
mfd: si476x-cmd: Remedy checkpatch style complains
...
1050 lines
31 KiB
C
1050 lines
31 KiB
C
/*
|
|
* s2mps11.c
|
|
*
|
|
* Copyright (c) 2012-2014 Samsung Electronics Co., Ltd
|
|
* http://www.samsung.com
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
#include <linux/bug.h>
|
|
#include <linux/err.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/mfd/samsung/core.h>
|
|
#include <linux/mfd/samsung/s2mps11.h>
|
|
#include <linux/mfd/samsung/s2mps14.h>
|
|
#include <linux/mfd/samsung/s2mpu02.h>
|
|
|
|
struct s2mps11_info {
|
|
unsigned int rdev_num;
|
|
int ramp_delay2;
|
|
int ramp_delay34;
|
|
int ramp_delay5;
|
|
int ramp_delay16;
|
|
int ramp_delay7810;
|
|
int ramp_delay9;
|
|
|
|
enum sec_device_type dev_type;
|
|
|
|
/*
|
|
* One bit for each S2MPS14/S2MPU02 regulator whether the suspend mode
|
|
* was enabled.
|
|
*/
|
|
unsigned long long s2mps14_suspend_state:35;
|
|
|
|
/* Array of size rdev_num with GPIO-s for external sleep control */
|
|
int *ext_control_gpio;
|
|
};
|
|
|
|
static int get_ramp_delay(int ramp_delay)
|
|
{
|
|
unsigned char cnt = 0;
|
|
|
|
ramp_delay /= 6250;
|
|
|
|
while (true) {
|
|
ramp_delay = ramp_delay >> 1;
|
|
if (ramp_delay == 0)
|
|
break;
|
|
cnt++;
|
|
}
|
|
|
|
if (cnt > 3)
|
|
cnt = 3;
|
|
|
|
return cnt;
|
|
}
|
|
|
|
static int s2mps11_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
|
|
unsigned int old_selector,
|
|
unsigned int new_selector)
|
|
{
|
|
struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
|
|
unsigned int ramp_delay = 0;
|
|
int old_volt, new_volt;
|
|
|
|
switch (rdev_get_id(rdev)) {
|
|
case S2MPS11_BUCK2:
|
|
ramp_delay = s2mps11->ramp_delay2;
|
|
break;
|
|
case S2MPS11_BUCK3:
|
|
case S2MPS11_BUCK4:
|
|
ramp_delay = s2mps11->ramp_delay34;
|
|
break;
|
|
case S2MPS11_BUCK5:
|
|
ramp_delay = s2mps11->ramp_delay5;
|
|
break;
|
|
case S2MPS11_BUCK6:
|
|
case S2MPS11_BUCK1:
|
|
ramp_delay = s2mps11->ramp_delay16;
|
|
break;
|
|
case S2MPS11_BUCK7:
|
|
case S2MPS11_BUCK8:
|
|
case S2MPS11_BUCK10:
|
|
ramp_delay = s2mps11->ramp_delay7810;
|
|
break;
|
|
case S2MPS11_BUCK9:
|
|
ramp_delay = s2mps11->ramp_delay9;
|
|
}
|
|
|
|
if (ramp_delay == 0)
|
|
ramp_delay = rdev->desc->ramp_delay;
|
|
|
|
old_volt = rdev->desc->min_uV + (rdev->desc->uV_step * old_selector);
|
|
new_volt = rdev->desc->min_uV + (rdev->desc->uV_step * new_selector);
|
|
|
|
return DIV_ROUND_UP(abs(new_volt - old_volt), ramp_delay);
|
|
}
|
|
|
|
static int s2mps11_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
|
|
{
|
|
struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
|
|
unsigned int ramp_val, ramp_shift, ramp_reg = S2MPS11_REG_RAMP_BUCK;
|
|
unsigned int ramp_enable = 1, enable_shift = 0;
|
|
int ret;
|
|
|
|
switch (rdev_get_id(rdev)) {
|
|
case S2MPS11_BUCK1:
|
|
if (ramp_delay > s2mps11->ramp_delay16)
|
|
s2mps11->ramp_delay16 = ramp_delay;
|
|
else
|
|
ramp_delay = s2mps11->ramp_delay16;
|
|
|
|
ramp_shift = S2MPS11_BUCK16_RAMP_SHIFT;
|
|
break;
|
|
case S2MPS11_BUCK2:
|
|
enable_shift = S2MPS11_BUCK2_RAMP_EN_SHIFT;
|
|
if (!ramp_delay) {
|
|
ramp_enable = 0;
|
|
break;
|
|
}
|
|
|
|
s2mps11->ramp_delay2 = ramp_delay;
|
|
ramp_shift = S2MPS11_BUCK2_RAMP_SHIFT;
|
|
ramp_reg = S2MPS11_REG_RAMP;
|
|
break;
|
|
case S2MPS11_BUCK3:
|
|
enable_shift = S2MPS11_BUCK3_RAMP_EN_SHIFT;
|
|
if (!ramp_delay) {
|
|
ramp_enable = 0;
|
|
break;
|
|
}
|
|
|
|
if (ramp_delay > s2mps11->ramp_delay34)
|
|
s2mps11->ramp_delay34 = ramp_delay;
|
|
else
|
|
ramp_delay = s2mps11->ramp_delay34;
|
|
|
|
ramp_shift = S2MPS11_BUCK34_RAMP_SHIFT;
|
|
ramp_reg = S2MPS11_REG_RAMP;
|
|
break;
|
|
case S2MPS11_BUCK4:
|
|
enable_shift = S2MPS11_BUCK4_RAMP_EN_SHIFT;
|
|
if (!ramp_delay) {
|
|
ramp_enable = 0;
|
|
break;
|
|
}
|
|
|
|
if (ramp_delay > s2mps11->ramp_delay34)
|
|
s2mps11->ramp_delay34 = ramp_delay;
|
|
else
|
|
ramp_delay = s2mps11->ramp_delay34;
|
|
|
|
ramp_shift = S2MPS11_BUCK34_RAMP_SHIFT;
|
|
ramp_reg = S2MPS11_REG_RAMP;
|
|
break;
|
|
case S2MPS11_BUCK5:
|
|
s2mps11->ramp_delay5 = ramp_delay;
|
|
ramp_shift = S2MPS11_BUCK5_RAMP_SHIFT;
|
|
break;
|
|
case S2MPS11_BUCK6:
|
|
enable_shift = S2MPS11_BUCK6_RAMP_EN_SHIFT;
|
|
if (!ramp_delay) {
|
|
ramp_enable = 0;
|
|
break;
|
|
}
|
|
|
|
if (ramp_delay > s2mps11->ramp_delay16)
|
|
s2mps11->ramp_delay16 = ramp_delay;
|
|
else
|
|
ramp_delay = s2mps11->ramp_delay16;
|
|
|
|
ramp_shift = S2MPS11_BUCK16_RAMP_SHIFT;
|
|
break;
|
|
case S2MPS11_BUCK7:
|
|
case S2MPS11_BUCK8:
|
|
case S2MPS11_BUCK10:
|
|
if (ramp_delay > s2mps11->ramp_delay7810)
|
|
s2mps11->ramp_delay7810 = ramp_delay;
|
|
else
|
|
ramp_delay = s2mps11->ramp_delay7810;
|
|
|
|
ramp_shift = S2MPS11_BUCK7810_RAMP_SHIFT;
|
|
break;
|
|
case S2MPS11_BUCK9:
|
|
s2mps11->ramp_delay9 = ramp_delay;
|
|
ramp_shift = S2MPS11_BUCK9_RAMP_SHIFT;
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
|
|
if (!ramp_enable)
|
|
goto ramp_disable;
|
|
|
|
/* Ramp delay can be enabled/disabled only for buck[2346] */
|
|
if ((rdev_get_id(rdev) >= S2MPS11_BUCK2 &&
|
|
rdev_get_id(rdev) <= S2MPS11_BUCK4) ||
|
|
rdev_get_id(rdev) == S2MPS11_BUCK6) {
|
|
ret = regmap_update_bits(rdev->regmap, S2MPS11_REG_RAMP,
|
|
1 << enable_shift, 1 << enable_shift);
|
|
if (ret) {
|
|
dev_err(&rdev->dev, "failed to enable ramp rate\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
ramp_val = get_ramp_delay(ramp_delay);
|
|
|
|
return regmap_update_bits(rdev->regmap, ramp_reg, 0x3 << ramp_shift,
|
|
ramp_val << ramp_shift);
|
|
|
|
ramp_disable:
|
|
return regmap_update_bits(rdev->regmap, S2MPS11_REG_RAMP,
|
|
1 << enable_shift, 0);
|
|
}
|
|
|
|
static struct regulator_ops s2mps11_ldo_ops = {
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
|
};
|
|
|
|
static struct regulator_ops s2mps11_buck_ops = {
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.set_voltage_time_sel = s2mps11_regulator_set_voltage_time_sel,
|
|
.set_ramp_delay = s2mps11_set_ramp_delay,
|
|
};
|
|
|
|
#define regulator_desc_s2mps11_ldo1(num) { \
|
|
.name = "LDO"#num, \
|
|
.id = S2MPS11_LDO##num, \
|
|
.ops = &s2mps11_ldo_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = S2MPS11_LDO_MIN, \
|
|
.uV_step = S2MPS11_LDO_STEP1, \
|
|
.n_voltages = S2MPS11_LDO_N_VOLTAGES, \
|
|
.vsel_reg = S2MPS11_REG_L1CTRL + num - 1, \
|
|
.vsel_mask = S2MPS11_LDO_VSEL_MASK, \
|
|
.enable_reg = S2MPS11_REG_L1CTRL + num - 1, \
|
|
.enable_mask = S2MPS11_ENABLE_MASK \
|
|
}
|
|
#define regulator_desc_s2mps11_ldo2(num) { \
|
|
.name = "LDO"#num, \
|
|
.id = S2MPS11_LDO##num, \
|
|
.ops = &s2mps11_ldo_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = S2MPS11_LDO_MIN, \
|
|
.uV_step = S2MPS11_LDO_STEP2, \
|
|
.n_voltages = S2MPS11_LDO_N_VOLTAGES, \
|
|
.vsel_reg = S2MPS11_REG_L1CTRL + num - 1, \
|
|
.vsel_mask = S2MPS11_LDO_VSEL_MASK, \
|
|
.enable_reg = S2MPS11_REG_L1CTRL + num - 1, \
|
|
.enable_mask = S2MPS11_ENABLE_MASK \
|
|
}
|
|
|
|
#define regulator_desc_s2mps11_buck1_4(num) { \
|
|
.name = "BUCK"#num, \
|
|
.id = S2MPS11_BUCK##num, \
|
|
.ops = &s2mps11_buck_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = S2MPS11_BUCK_MIN1, \
|
|
.uV_step = S2MPS11_BUCK_STEP1, \
|
|
.n_voltages = S2MPS11_BUCK_N_VOLTAGES, \
|
|
.ramp_delay = S2MPS11_RAMP_DELAY, \
|
|
.vsel_reg = S2MPS11_REG_B1CTRL2 + (num - 1) * 2, \
|
|
.vsel_mask = S2MPS11_BUCK_VSEL_MASK, \
|
|
.enable_reg = S2MPS11_REG_B1CTRL1 + (num - 1) * 2, \
|
|
.enable_mask = S2MPS11_ENABLE_MASK \
|
|
}
|
|
|
|
#define regulator_desc_s2mps11_buck5 { \
|
|
.name = "BUCK5", \
|
|
.id = S2MPS11_BUCK5, \
|
|
.ops = &s2mps11_buck_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = S2MPS11_BUCK_MIN1, \
|
|
.uV_step = S2MPS11_BUCK_STEP1, \
|
|
.n_voltages = S2MPS11_BUCK_N_VOLTAGES, \
|
|
.ramp_delay = S2MPS11_RAMP_DELAY, \
|
|
.vsel_reg = S2MPS11_REG_B5CTRL2, \
|
|
.vsel_mask = S2MPS11_BUCK_VSEL_MASK, \
|
|
.enable_reg = S2MPS11_REG_B5CTRL1, \
|
|
.enable_mask = S2MPS11_ENABLE_MASK \
|
|
}
|
|
|
|
#define regulator_desc_s2mps11_buck6_8(num) { \
|
|
.name = "BUCK"#num, \
|
|
.id = S2MPS11_BUCK##num, \
|
|
.ops = &s2mps11_buck_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = S2MPS11_BUCK_MIN1, \
|
|
.uV_step = S2MPS11_BUCK_STEP1, \
|
|
.n_voltages = S2MPS11_BUCK_N_VOLTAGES, \
|
|
.ramp_delay = S2MPS11_RAMP_DELAY, \
|
|
.vsel_reg = S2MPS11_REG_B6CTRL2 + (num - 6) * 2, \
|
|
.vsel_mask = S2MPS11_BUCK_VSEL_MASK, \
|
|
.enable_reg = S2MPS11_REG_B6CTRL1 + (num - 6) * 2, \
|
|
.enable_mask = S2MPS11_ENABLE_MASK \
|
|
}
|
|
|
|
#define regulator_desc_s2mps11_buck9 { \
|
|
.name = "BUCK9", \
|
|
.id = S2MPS11_BUCK9, \
|
|
.ops = &s2mps11_buck_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = S2MPS11_BUCK_MIN3, \
|
|
.uV_step = S2MPS11_BUCK_STEP3, \
|
|
.n_voltages = S2MPS11_BUCK_N_VOLTAGES, \
|
|
.ramp_delay = S2MPS11_RAMP_DELAY, \
|
|
.vsel_reg = S2MPS11_REG_B9CTRL2, \
|
|
.vsel_mask = S2MPS11_BUCK_VSEL_MASK, \
|
|
.enable_reg = S2MPS11_REG_B9CTRL1, \
|
|
.enable_mask = S2MPS11_ENABLE_MASK \
|
|
}
|
|
|
|
#define regulator_desc_s2mps11_buck10 { \
|
|
.name = "BUCK10", \
|
|
.id = S2MPS11_BUCK10, \
|
|
.ops = &s2mps11_buck_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = S2MPS11_BUCK_MIN2, \
|
|
.uV_step = S2MPS11_BUCK_STEP2, \
|
|
.n_voltages = S2MPS11_BUCK_N_VOLTAGES, \
|
|
.ramp_delay = S2MPS11_RAMP_DELAY, \
|
|
.vsel_reg = S2MPS11_REG_B10CTRL2, \
|
|
.vsel_mask = S2MPS11_BUCK_VSEL_MASK, \
|
|
.enable_reg = S2MPS11_REG_B10CTRL1, \
|
|
.enable_mask = S2MPS11_ENABLE_MASK \
|
|
}
|
|
|
|
static const struct regulator_desc s2mps11_regulators[] = {
|
|
regulator_desc_s2mps11_ldo2(1),
|
|
regulator_desc_s2mps11_ldo1(2),
|
|
regulator_desc_s2mps11_ldo1(3),
|
|
regulator_desc_s2mps11_ldo1(4),
|
|
regulator_desc_s2mps11_ldo1(5),
|
|
regulator_desc_s2mps11_ldo2(6),
|
|
regulator_desc_s2mps11_ldo1(7),
|
|
regulator_desc_s2mps11_ldo1(8),
|
|
regulator_desc_s2mps11_ldo1(9),
|
|
regulator_desc_s2mps11_ldo1(10),
|
|
regulator_desc_s2mps11_ldo2(11),
|
|
regulator_desc_s2mps11_ldo1(12),
|
|
regulator_desc_s2mps11_ldo1(13),
|
|
regulator_desc_s2mps11_ldo1(14),
|
|
regulator_desc_s2mps11_ldo1(15),
|
|
regulator_desc_s2mps11_ldo1(16),
|
|
regulator_desc_s2mps11_ldo1(17),
|
|
regulator_desc_s2mps11_ldo1(18),
|
|
regulator_desc_s2mps11_ldo1(19),
|
|
regulator_desc_s2mps11_ldo1(20),
|
|
regulator_desc_s2mps11_ldo1(21),
|
|
regulator_desc_s2mps11_ldo2(22),
|
|
regulator_desc_s2mps11_ldo2(23),
|
|
regulator_desc_s2mps11_ldo1(24),
|
|
regulator_desc_s2mps11_ldo1(25),
|
|
regulator_desc_s2mps11_ldo1(26),
|
|
regulator_desc_s2mps11_ldo2(27),
|
|
regulator_desc_s2mps11_ldo1(28),
|
|
regulator_desc_s2mps11_ldo1(29),
|
|
regulator_desc_s2mps11_ldo1(30),
|
|
regulator_desc_s2mps11_ldo1(31),
|
|
regulator_desc_s2mps11_ldo1(32),
|
|
regulator_desc_s2mps11_ldo1(33),
|
|
regulator_desc_s2mps11_ldo1(34),
|
|
regulator_desc_s2mps11_ldo1(35),
|
|
regulator_desc_s2mps11_ldo1(36),
|
|
regulator_desc_s2mps11_ldo1(37),
|
|
regulator_desc_s2mps11_ldo1(38),
|
|
regulator_desc_s2mps11_buck1_4(1),
|
|
regulator_desc_s2mps11_buck1_4(2),
|
|
regulator_desc_s2mps11_buck1_4(3),
|
|
regulator_desc_s2mps11_buck1_4(4),
|
|
regulator_desc_s2mps11_buck5,
|
|
regulator_desc_s2mps11_buck6_8(6),
|
|
regulator_desc_s2mps11_buck6_8(7),
|
|
regulator_desc_s2mps11_buck6_8(8),
|
|
regulator_desc_s2mps11_buck9,
|
|
regulator_desc_s2mps11_buck10,
|
|
};
|
|
|
|
static int s2mps14_regulator_enable(struct regulator_dev *rdev)
|
|
{
|
|
struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
|
|
unsigned int val;
|
|
|
|
switch (s2mps11->dev_type) {
|
|
case S2MPS14X:
|
|
if (s2mps11->s2mps14_suspend_state & (1 << rdev_get_id(rdev)))
|
|
val = S2MPS14_ENABLE_SUSPEND;
|
|
else if (gpio_is_valid(s2mps11->ext_control_gpio[rdev_get_id(rdev)]))
|
|
val = S2MPS14_ENABLE_EXT_CONTROL;
|
|
else
|
|
val = rdev->desc->enable_mask;
|
|
break;
|
|
case S2MPU02:
|
|
if (s2mps11->s2mps14_suspend_state & (1 << rdev_get_id(rdev)))
|
|
val = S2MPU02_ENABLE_SUSPEND;
|
|
else
|
|
val = rdev->desc->enable_mask;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
};
|
|
|
|
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
|
|
rdev->desc->enable_mask, val);
|
|
}
|
|
|
|
static int s2mps14_regulator_set_suspend_disable(struct regulator_dev *rdev)
|
|
{
|
|
int ret;
|
|
unsigned int val, state;
|
|
struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
|
|
int rdev_id = rdev_get_id(rdev);
|
|
|
|
/* Below LDO should be always on or does not support suspend mode. */
|
|
switch (s2mps11->dev_type) {
|
|
case S2MPS14X:
|
|
switch (rdev_id) {
|
|
case S2MPS14_LDO3:
|
|
return 0;
|
|
default:
|
|
state = S2MPS14_ENABLE_SUSPEND;
|
|
break;
|
|
};
|
|
break;
|
|
case S2MPU02:
|
|
switch (rdev_id) {
|
|
case S2MPU02_LDO13:
|
|
case S2MPU02_LDO14:
|
|
case S2MPU02_LDO15:
|
|
case S2MPU02_LDO17:
|
|
case S2MPU02_BUCK7:
|
|
state = S2MPU02_DISABLE_SUSPEND;
|
|
break;
|
|
default:
|
|
state = S2MPU02_ENABLE_SUSPEND;
|
|
break;
|
|
};
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
};
|
|
|
|
ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
s2mps11->s2mps14_suspend_state |= (1 << rdev_get_id(rdev));
|
|
/*
|
|
* Don't enable suspend mode if regulator is already disabled because
|
|
* this would effectively for a short time turn on the regulator after
|
|
* resuming.
|
|
* However we still want to toggle the suspend_state bit for regulator
|
|
* in case if it got enabled before suspending the system.
|
|
*/
|
|
if (!(val & rdev->desc->enable_mask))
|
|
return 0;
|
|
|
|
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
|
|
rdev->desc->enable_mask, state);
|
|
}
|
|
|
|
static struct regulator_ops s2mps14_reg_ops = {
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.enable = s2mps14_regulator_enable,
|
|
.disable = regulator_disable_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
|
.set_suspend_disable = s2mps14_regulator_set_suspend_disable,
|
|
};
|
|
|
|
#define regulator_desc_s2mps14_ldo1(num) { \
|
|
.name = "LDO"#num, \
|
|
.id = S2MPS14_LDO##num, \
|
|
.ops = &s2mps14_reg_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = S2MPS14_LDO_MIN_800MV, \
|
|
.uV_step = S2MPS14_LDO_STEP_25MV, \
|
|
.n_voltages = S2MPS14_LDO_N_VOLTAGES, \
|
|
.vsel_reg = S2MPS14_REG_L1CTRL + num - 1, \
|
|
.vsel_mask = S2MPS14_LDO_VSEL_MASK, \
|
|
.enable_reg = S2MPS14_REG_L1CTRL + num - 1, \
|
|
.enable_mask = S2MPS14_ENABLE_MASK \
|
|
}
|
|
#define regulator_desc_s2mps14_ldo2(num) { \
|
|
.name = "LDO"#num, \
|
|
.id = S2MPS14_LDO##num, \
|
|
.ops = &s2mps14_reg_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = S2MPS14_LDO_MIN_1800MV, \
|
|
.uV_step = S2MPS14_LDO_STEP_25MV, \
|
|
.n_voltages = S2MPS14_LDO_N_VOLTAGES, \
|
|
.vsel_reg = S2MPS14_REG_L1CTRL + num - 1, \
|
|
.vsel_mask = S2MPS14_LDO_VSEL_MASK, \
|
|
.enable_reg = S2MPS14_REG_L1CTRL + num - 1, \
|
|
.enable_mask = S2MPS14_ENABLE_MASK \
|
|
}
|
|
#define regulator_desc_s2mps14_ldo3(num) { \
|
|
.name = "LDO"#num, \
|
|
.id = S2MPS14_LDO##num, \
|
|
.ops = &s2mps14_reg_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = S2MPS14_LDO_MIN_800MV, \
|
|
.uV_step = S2MPS14_LDO_STEP_12_5MV, \
|
|
.n_voltages = S2MPS14_LDO_N_VOLTAGES, \
|
|
.vsel_reg = S2MPS14_REG_L1CTRL + num - 1, \
|
|
.vsel_mask = S2MPS14_LDO_VSEL_MASK, \
|
|
.enable_reg = S2MPS14_REG_L1CTRL + num - 1, \
|
|
.enable_mask = S2MPS14_ENABLE_MASK \
|
|
}
|
|
#define regulator_desc_s2mps14_buck1235(num) { \
|
|
.name = "BUCK"#num, \
|
|
.id = S2MPS14_BUCK##num, \
|
|
.ops = &s2mps14_reg_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = S2MPS14_BUCK1235_MIN_600MV, \
|
|
.uV_step = S2MPS14_BUCK1235_STEP_6_25MV, \
|
|
.n_voltages = S2MPS14_BUCK_N_VOLTAGES, \
|
|
.linear_min_sel = S2MPS14_BUCK1235_START_SEL, \
|
|
.ramp_delay = S2MPS14_BUCK_RAMP_DELAY, \
|
|
.vsel_reg = S2MPS14_REG_B1CTRL2 + (num - 1) * 2, \
|
|
.vsel_mask = S2MPS14_BUCK_VSEL_MASK, \
|
|
.enable_reg = S2MPS14_REG_B1CTRL1 + (num - 1) * 2, \
|
|
.enable_mask = S2MPS14_ENABLE_MASK \
|
|
}
|
|
#define regulator_desc_s2mps14_buck4(num) { \
|
|
.name = "BUCK"#num, \
|
|
.id = S2MPS14_BUCK##num, \
|
|
.ops = &s2mps14_reg_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = S2MPS14_BUCK4_MIN_1400MV, \
|
|
.uV_step = S2MPS14_BUCK4_STEP_12_5MV, \
|
|
.n_voltages = S2MPS14_BUCK_N_VOLTAGES, \
|
|
.linear_min_sel = S2MPS14_BUCK4_START_SEL, \
|
|
.ramp_delay = S2MPS14_BUCK_RAMP_DELAY, \
|
|
.vsel_reg = S2MPS14_REG_B1CTRL2 + (num - 1) * 2, \
|
|
.vsel_mask = S2MPS14_BUCK_VSEL_MASK, \
|
|
.enable_reg = S2MPS14_REG_B1CTRL1 + (num - 1) * 2, \
|
|
.enable_mask = S2MPS14_ENABLE_MASK \
|
|
}
|
|
|
|
static const struct regulator_desc s2mps14_regulators[] = {
|
|
regulator_desc_s2mps14_ldo3(1),
|
|
regulator_desc_s2mps14_ldo3(2),
|
|
regulator_desc_s2mps14_ldo1(3),
|
|
regulator_desc_s2mps14_ldo1(4),
|
|
regulator_desc_s2mps14_ldo3(5),
|
|
regulator_desc_s2mps14_ldo3(6),
|
|
regulator_desc_s2mps14_ldo1(7),
|
|
regulator_desc_s2mps14_ldo2(8),
|
|
regulator_desc_s2mps14_ldo3(9),
|
|
regulator_desc_s2mps14_ldo3(10),
|
|
regulator_desc_s2mps14_ldo1(11),
|
|
regulator_desc_s2mps14_ldo2(12),
|
|
regulator_desc_s2mps14_ldo2(13),
|
|
regulator_desc_s2mps14_ldo2(14),
|
|
regulator_desc_s2mps14_ldo2(15),
|
|
regulator_desc_s2mps14_ldo2(16),
|
|
regulator_desc_s2mps14_ldo2(17),
|
|
regulator_desc_s2mps14_ldo2(18),
|
|
regulator_desc_s2mps14_ldo1(19),
|
|
regulator_desc_s2mps14_ldo1(20),
|
|
regulator_desc_s2mps14_ldo1(21),
|
|
regulator_desc_s2mps14_ldo3(22),
|
|
regulator_desc_s2mps14_ldo1(23),
|
|
regulator_desc_s2mps14_ldo2(24),
|
|
regulator_desc_s2mps14_ldo2(25),
|
|
regulator_desc_s2mps14_buck1235(1),
|
|
regulator_desc_s2mps14_buck1235(2),
|
|
regulator_desc_s2mps14_buck1235(3),
|
|
regulator_desc_s2mps14_buck4(4),
|
|
regulator_desc_s2mps14_buck1235(5),
|
|
};
|
|
|
|
static int s2mps14_pmic_enable_ext_control(struct s2mps11_info *s2mps11,
|
|
struct regulator_dev *rdev)
|
|
{
|
|
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
|
|
rdev->desc->enable_mask, S2MPS14_ENABLE_EXT_CONTROL);
|
|
}
|
|
|
|
static void s2mps14_pmic_dt_parse_ext_control_gpio(struct platform_device *pdev,
|
|
struct of_regulator_match *rdata, struct s2mps11_info *s2mps11)
|
|
{
|
|
int *gpio = s2mps11->ext_control_gpio;
|
|
unsigned int i;
|
|
unsigned int valid_regulators[3] = { S2MPS14_LDO10, S2MPS14_LDO11,
|
|
S2MPS14_LDO12 };
|
|
|
|
for (i = 0; i < ARRAY_SIZE(valid_regulators); i++) {
|
|
unsigned int reg = valid_regulators[i];
|
|
|
|
if (!rdata[reg].init_data || !rdata[reg].of_node)
|
|
continue;
|
|
|
|
gpio[reg] = of_get_named_gpio(rdata[reg].of_node,
|
|
"samsung,ext-control-gpios", 0);
|
|
if (gpio_is_valid(gpio[reg]))
|
|
dev_dbg(&pdev->dev, "Using GPIO %d for ext-control over %d/%s\n",
|
|
gpio[reg], reg, rdata[reg].name);
|
|
}
|
|
}
|
|
|
|
static int s2mps11_pmic_dt_parse(struct platform_device *pdev,
|
|
struct of_regulator_match *rdata, struct s2mps11_info *s2mps11)
|
|
{
|
|
struct device_node *reg_np;
|
|
|
|
reg_np = of_get_child_by_name(pdev->dev.parent->of_node, "regulators");
|
|
if (!reg_np) {
|
|
dev_err(&pdev->dev, "could not find regulators sub-node\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
of_regulator_match(&pdev->dev, reg_np, rdata, s2mps11->rdev_num);
|
|
if (s2mps11->dev_type == S2MPS14X)
|
|
s2mps14_pmic_dt_parse_ext_control_gpio(pdev, rdata, s2mps11);
|
|
|
|
of_node_put(reg_np);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s2mpu02_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
|
|
{
|
|
unsigned int ramp_val, ramp_shift, ramp_reg;
|
|
|
|
switch (rdev_get_id(rdev)) {
|
|
case S2MPU02_BUCK1:
|
|
ramp_shift = S2MPU02_BUCK1_RAMP_SHIFT;
|
|
break;
|
|
case S2MPU02_BUCK2:
|
|
ramp_shift = S2MPU02_BUCK2_RAMP_SHIFT;
|
|
break;
|
|
case S2MPU02_BUCK3:
|
|
ramp_shift = S2MPU02_BUCK3_RAMP_SHIFT;
|
|
break;
|
|
case S2MPU02_BUCK4:
|
|
ramp_shift = S2MPU02_BUCK4_RAMP_SHIFT;
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
ramp_reg = S2MPU02_REG_RAMP1;
|
|
ramp_val = get_ramp_delay(ramp_delay);
|
|
|
|
return regmap_update_bits(rdev->regmap, ramp_reg,
|
|
S2MPU02_BUCK1234_RAMP_MASK << ramp_shift,
|
|
ramp_val << ramp_shift);
|
|
}
|
|
|
|
static struct regulator_ops s2mpu02_ldo_ops = {
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.enable = s2mps14_regulator_enable,
|
|
.disable = regulator_disable_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
|
.set_suspend_disable = s2mps14_regulator_set_suspend_disable,
|
|
};
|
|
|
|
static struct regulator_ops s2mpu02_buck_ops = {
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.enable = s2mps14_regulator_enable,
|
|
.disable = regulator_disable_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
|
.set_suspend_disable = s2mps14_regulator_set_suspend_disable,
|
|
.set_ramp_delay = s2mpu02_set_ramp_delay,
|
|
};
|
|
|
|
#define regulator_desc_s2mpu02_ldo1(num) { \
|
|
.name = "LDO"#num, \
|
|
.id = S2MPU02_LDO##num, \
|
|
.ops = &s2mpu02_ldo_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = S2MPU02_LDO_MIN_900MV, \
|
|
.uV_step = S2MPU02_LDO_STEP_12_5MV, \
|
|
.linear_min_sel = S2MPU02_LDO_GROUP1_START_SEL, \
|
|
.n_voltages = S2MPU02_LDO_N_VOLTAGES, \
|
|
.vsel_reg = S2MPU02_REG_L1CTRL, \
|
|
.vsel_mask = S2MPU02_LDO_VSEL_MASK, \
|
|
.enable_reg = S2MPU02_REG_L1CTRL, \
|
|
.enable_mask = S2MPU02_ENABLE_MASK \
|
|
}
|
|
#define regulator_desc_s2mpu02_ldo2(num) { \
|
|
.name = "LDO"#num, \
|
|
.id = S2MPU02_LDO##num, \
|
|
.ops = &s2mpu02_ldo_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = S2MPU02_LDO_MIN_1050MV, \
|
|
.uV_step = S2MPU02_LDO_STEP_25MV, \
|
|
.linear_min_sel = S2MPU02_LDO_GROUP2_START_SEL, \
|
|
.n_voltages = S2MPU02_LDO_N_VOLTAGES, \
|
|
.vsel_reg = S2MPU02_REG_L2CTRL1, \
|
|
.vsel_mask = S2MPU02_LDO_VSEL_MASK, \
|
|
.enable_reg = S2MPU02_REG_L2CTRL1, \
|
|
.enable_mask = S2MPU02_ENABLE_MASK \
|
|
}
|
|
#define regulator_desc_s2mpu02_ldo3(num) { \
|
|
.name = "LDO"#num, \
|
|
.id = S2MPU02_LDO##num, \
|
|
.ops = &s2mpu02_ldo_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = S2MPU02_LDO_MIN_900MV, \
|
|
.uV_step = S2MPU02_LDO_STEP_12_5MV, \
|
|
.linear_min_sel = S2MPU02_LDO_GROUP1_START_SEL, \
|
|
.n_voltages = S2MPU02_LDO_N_VOLTAGES, \
|
|
.vsel_reg = S2MPU02_REG_L3CTRL + num - 3, \
|
|
.vsel_mask = S2MPU02_LDO_VSEL_MASK, \
|
|
.enable_reg = S2MPU02_REG_L3CTRL + num - 3, \
|
|
.enable_mask = S2MPU02_ENABLE_MASK \
|
|
}
|
|
#define regulator_desc_s2mpu02_ldo4(num) { \
|
|
.name = "LDO"#num, \
|
|
.id = S2MPU02_LDO##num, \
|
|
.ops = &s2mpu02_ldo_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = S2MPU02_LDO_MIN_1050MV, \
|
|
.uV_step = S2MPU02_LDO_STEP_25MV, \
|
|
.linear_min_sel = S2MPU02_LDO_GROUP2_START_SEL, \
|
|
.n_voltages = S2MPU02_LDO_N_VOLTAGES, \
|
|
.vsel_reg = S2MPU02_REG_L3CTRL + num - 3, \
|
|
.vsel_mask = S2MPU02_LDO_VSEL_MASK, \
|
|
.enable_reg = S2MPU02_REG_L3CTRL + num - 3, \
|
|
.enable_mask = S2MPU02_ENABLE_MASK \
|
|
}
|
|
#define regulator_desc_s2mpu02_ldo5(num) { \
|
|
.name = "LDO"#num, \
|
|
.id = S2MPU02_LDO##num, \
|
|
.ops = &s2mpu02_ldo_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = S2MPU02_LDO_MIN_1600MV, \
|
|
.uV_step = S2MPU02_LDO_STEP_50MV, \
|
|
.linear_min_sel = S2MPU02_LDO_GROUP3_START_SEL, \
|
|
.n_voltages = S2MPU02_LDO_N_VOLTAGES, \
|
|
.vsel_reg = S2MPU02_REG_L3CTRL + num - 3, \
|
|
.vsel_mask = S2MPU02_LDO_VSEL_MASK, \
|
|
.enable_reg = S2MPU02_REG_L3CTRL + num - 3, \
|
|
.enable_mask = S2MPU02_ENABLE_MASK \
|
|
}
|
|
|
|
#define regulator_desc_s2mpu02_buck1234(num) { \
|
|
.name = "BUCK"#num, \
|
|
.id = S2MPU02_BUCK##num, \
|
|
.ops = &s2mpu02_buck_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = S2MPU02_BUCK1234_MIN_600MV, \
|
|
.uV_step = S2MPU02_BUCK1234_STEP_6_25MV, \
|
|
.n_voltages = S2MPU02_BUCK_N_VOLTAGES, \
|
|
.linear_min_sel = S2MPU02_BUCK1234_START_SEL, \
|
|
.ramp_delay = S2MPU02_BUCK_RAMP_DELAY, \
|
|
.vsel_reg = S2MPU02_REG_B1CTRL2 + (num - 1) * 2, \
|
|
.vsel_mask = S2MPU02_BUCK_VSEL_MASK, \
|
|
.enable_reg = S2MPU02_REG_B1CTRL1 + (num - 1) * 2, \
|
|
.enable_mask = S2MPU02_ENABLE_MASK \
|
|
}
|
|
#define regulator_desc_s2mpu02_buck5(num) { \
|
|
.name = "BUCK"#num, \
|
|
.id = S2MPU02_BUCK##num, \
|
|
.ops = &s2mpu02_ldo_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = S2MPU02_BUCK5_MIN_1081_25MV, \
|
|
.uV_step = S2MPU02_BUCK5_STEP_6_25MV, \
|
|
.n_voltages = S2MPU02_BUCK_N_VOLTAGES, \
|
|
.linear_min_sel = S2MPU02_BUCK5_START_SEL, \
|
|
.ramp_delay = S2MPU02_BUCK_RAMP_DELAY, \
|
|
.vsel_reg = S2MPU02_REG_B5CTRL2, \
|
|
.vsel_mask = S2MPU02_BUCK_VSEL_MASK, \
|
|
.enable_reg = S2MPU02_REG_B5CTRL1, \
|
|
.enable_mask = S2MPU02_ENABLE_MASK \
|
|
}
|
|
#define regulator_desc_s2mpu02_buck6(num) { \
|
|
.name = "BUCK"#num, \
|
|
.id = S2MPU02_BUCK##num, \
|
|
.ops = &s2mpu02_ldo_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = S2MPU02_BUCK6_MIN_1700MV, \
|
|
.uV_step = S2MPU02_BUCK6_STEP_2_50MV, \
|
|
.n_voltages = S2MPU02_BUCK_N_VOLTAGES, \
|
|
.linear_min_sel = S2MPU02_BUCK6_START_SEL, \
|
|
.ramp_delay = S2MPU02_BUCK_RAMP_DELAY, \
|
|
.vsel_reg = S2MPU02_REG_B6CTRL2, \
|
|
.vsel_mask = S2MPU02_BUCK_VSEL_MASK, \
|
|
.enable_reg = S2MPU02_REG_B6CTRL1, \
|
|
.enable_mask = S2MPU02_ENABLE_MASK \
|
|
}
|
|
#define regulator_desc_s2mpu02_buck7(num) { \
|
|
.name = "BUCK"#num, \
|
|
.id = S2MPU02_BUCK##num, \
|
|
.ops = &s2mpu02_ldo_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.min_uV = S2MPU02_BUCK7_MIN_900MV, \
|
|
.uV_step = S2MPU02_BUCK7_STEP_6_25MV, \
|
|
.n_voltages = S2MPU02_BUCK_N_VOLTAGES, \
|
|
.linear_min_sel = S2MPU02_BUCK7_START_SEL, \
|
|
.ramp_delay = S2MPU02_BUCK_RAMP_DELAY, \
|
|
.vsel_reg = S2MPU02_REG_B7CTRL2, \
|
|
.vsel_mask = S2MPU02_BUCK_VSEL_MASK, \
|
|
.enable_reg = S2MPU02_REG_B7CTRL1, \
|
|
.enable_mask = S2MPU02_ENABLE_MASK \
|
|
}
|
|
|
|
static const struct regulator_desc s2mpu02_regulators[] = {
|
|
regulator_desc_s2mpu02_ldo1(1),
|
|
regulator_desc_s2mpu02_ldo2(2),
|
|
regulator_desc_s2mpu02_ldo4(3),
|
|
regulator_desc_s2mpu02_ldo5(4),
|
|
regulator_desc_s2mpu02_ldo4(5),
|
|
regulator_desc_s2mpu02_ldo3(6),
|
|
regulator_desc_s2mpu02_ldo3(7),
|
|
regulator_desc_s2mpu02_ldo4(8),
|
|
regulator_desc_s2mpu02_ldo5(9),
|
|
regulator_desc_s2mpu02_ldo3(10),
|
|
regulator_desc_s2mpu02_ldo4(11),
|
|
regulator_desc_s2mpu02_ldo5(12),
|
|
regulator_desc_s2mpu02_ldo5(13),
|
|
regulator_desc_s2mpu02_ldo5(14),
|
|
regulator_desc_s2mpu02_ldo5(15),
|
|
regulator_desc_s2mpu02_ldo5(16),
|
|
regulator_desc_s2mpu02_ldo4(17),
|
|
regulator_desc_s2mpu02_ldo5(18),
|
|
regulator_desc_s2mpu02_ldo3(19),
|
|
regulator_desc_s2mpu02_ldo4(20),
|
|
regulator_desc_s2mpu02_ldo5(21),
|
|
regulator_desc_s2mpu02_ldo5(22),
|
|
regulator_desc_s2mpu02_ldo5(23),
|
|
regulator_desc_s2mpu02_ldo4(24),
|
|
regulator_desc_s2mpu02_ldo5(25),
|
|
regulator_desc_s2mpu02_ldo4(26),
|
|
regulator_desc_s2mpu02_ldo5(27),
|
|
regulator_desc_s2mpu02_ldo5(28),
|
|
regulator_desc_s2mpu02_buck1234(1),
|
|
regulator_desc_s2mpu02_buck1234(2),
|
|
regulator_desc_s2mpu02_buck1234(3),
|
|
regulator_desc_s2mpu02_buck1234(4),
|
|
regulator_desc_s2mpu02_buck5(5),
|
|
regulator_desc_s2mpu02_buck6(6),
|
|
regulator_desc_s2mpu02_buck7(7),
|
|
};
|
|
|
|
static int s2mps11_pmic_probe(struct platform_device *pdev)
|
|
{
|
|
struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
|
|
struct sec_platform_data *pdata = NULL;
|
|
struct of_regulator_match *rdata = NULL;
|
|
struct regulator_config config = { };
|
|
struct s2mps11_info *s2mps11;
|
|
int i, ret = 0;
|
|
const struct regulator_desc *regulators;
|
|
|
|
s2mps11 = devm_kzalloc(&pdev->dev, sizeof(struct s2mps11_info),
|
|
GFP_KERNEL);
|
|
if (!s2mps11)
|
|
return -ENOMEM;
|
|
|
|
s2mps11->dev_type = platform_get_device_id(pdev)->driver_data;
|
|
switch (s2mps11->dev_type) {
|
|
case S2MPS11X:
|
|
s2mps11->rdev_num = ARRAY_SIZE(s2mps11_regulators);
|
|
regulators = s2mps11_regulators;
|
|
break;
|
|
case S2MPS14X:
|
|
s2mps11->rdev_num = ARRAY_SIZE(s2mps14_regulators);
|
|
regulators = s2mps14_regulators;
|
|
break;
|
|
case S2MPU02:
|
|
s2mps11->rdev_num = ARRAY_SIZE(s2mpu02_regulators);
|
|
regulators = s2mpu02_regulators;
|
|
break;
|
|
default:
|
|
dev_err(&pdev->dev, "Invalid device type: %u\n",
|
|
s2mps11->dev_type);
|
|
return -EINVAL;
|
|
};
|
|
|
|
s2mps11->ext_control_gpio = devm_kzalloc(&pdev->dev,
|
|
sizeof(*s2mps11->ext_control_gpio) * s2mps11->rdev_num,
|
|
GFP_KERNEL);
|
|
if (!s2mps11->ext_control_gpio)
|
|
return -ENOMEM;
|
|
/*
|
|
* 0 is a valid GPIO so initialize all GPIO-s to negative value
|
|
* to indicate that external control won't be used for this regulator.
|
|
*/
|
|
for (i = 0; i < s2mps11->rdev_num; i++)
|
|
s2mps11->ext_control_gpio[i] = -EINVAL;
|
|
|
|
if (!iodev->dev->of_node) {
|
|
if (iodev->pdata) {
|
|
pdata = iodev->pdata;
|
|
goto common_reg;
|
|
} else {
|
|
dev_err(pdev->dev.parent,
|
|
"Platform data or DT node not supplied\n");
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
rdata = kzalloc(sizeof(*rdata) * s2mps11->rdev_num, GFP_KERNEL);
|
|
if (!rdata)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < s2mps11->rdev_num; i++)
|
|
rdata[i].name = regulators[i].name;
|
|
|
|
ret = s2mps11_pmic_dt_parse(pdev, rdata, s2mps11);
|
|
if (ret)
|
|
goto out;
|
|
|
|
common_reg:
|
|
platform_set_drvdata(pdev, s2mps11);
|
|
|
|
config.dev = &pdev->dev;
|
|
config.regmap = iodev->regmap_pmic;
|
|
config.driver_data = s2mps11;
|
|
config.ena_gpio_flags = GPIOF_OUT_INIT_HIGH;
|
|
for (i = 0; i < s2mps11->rdev_num; i++) {
|
|
struct regulator_dev *regulator;
|
|
|
|
if (pdata) {
|
|
config.init_data = pdata->regulators[i].initdata;
|
|
config.of_node = pdata->regulators[i].reg_node;
|
|
} else {
|
|
config.init_data = rdata[i].init_data;
|
|
config.of_node = rdata[i].of_node;
|
|
}
|
|
config.ena_gpio = s2mps11->ext_control_gpio[i];
|
|
|
|
regulator = devm_regulator_register(&pdev->dev,
|
|
®ulators[i], &config);
|
|
if (IS_ERR(regulator)) {
|
|
ret = PTR_ERR(regulator);
|
|
dev_err(&pdev->dev, "regulator init failed for %d\n",
|
|
i);
|
|
goto out;
|
|
}
|
|
|
|
if (gpio_is_valid(s2mps11->ext_control_gpio[i])) {
|
|
ret = s2mps14_pmic_enable_ext_control(s2mps11,
|
|
regulator);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev,
|
|
"failed to enable GPIO control over %s: %d\n",
|
|
regulator->desc->name, ret);
|
|
goto out;
|
|
}
|
|
}
|
|
}
|
|
|
|
out:
|
|
kfree(rdata);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct platform_device_id s2mps11_pmic_id[] = {
|
|
{ "s2mps11-pmic", S2MPS11X},
|
|
{ "s2mps14-pmic", S2MPS14X},
|
|
{ "s2mpu02-pmic", S2MPU02},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, s2mps11_pmic_id);
|
|
|
|
static struct platform_driver s2mps11_pmic_driver = {
|
|
.driver = {
|
|
.name = "s2mps11-pmic",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = s2mps11_pmic_probe,
|
|
.id_table = s2mps11_pmic_id,
|
|
};
|
|
|
|
static int __init s2mps11_pmic_init(void)
|
|
{
|
|
return platform_driver_register(&s2mps11_pmic_driver);
|
|
}
|
|
subsys_initcall(s2mps11_pmic_init);
|
|
|
|
static void __exit s2mps11_pmic_exit(void)
|
|
{
|
|
platform_driver_unregister(&s2mps11_pmic_driver);
|
|
}
|
|
module_exit(s2mps11_pmic_exit);
|
|
|
|
/* Module information */
|
|
MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
|
|
MODULE_DESCRIPTION("SAMSUNG S2MPS11/S2MPS14/S2MPU02 Regulator Driver");
|
|
MODULE_LICENSE("GPL");
|