forked from Minki/linux
9e9a615103
The Xilinx Zynq FPGA driver takes ownership of the PR interface, making it impossible to use the ICAP interface for partial reconfiguration. This patch changes the driver to only activate PR over PCAP while the device is actively being accessed by the driver for programming. This allows both PCAP and ICAP interfaces to be used for PR. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Reviewed-by: Moritz Fischer <mdf@kernel.org> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
677 lines
18 KiB
C
677 lines
18 KiB
C
/*
|
|
* Copyright (c) 2011-2015 Xilinx Inc.
|
|
* Copyright (c) 2015, National Instruments Corp.
|
|
*
|
|
* FPGA Manager Driver for Xilinx Zynq, heavily based on xdevcfg driver
|
|
* in their vendor tree.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/fpga/fpga-mgr.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/string.h>
|
|
#include <linux/scatterlist.h>
|
|
|
|
/* Offsets into SLCR regmap */
|
|
|
|
/* FPGA Software Reset Control */
|
|
#define SLCR_FPGA_RST_CTRL_OFFSET 0x240
|
|
/* Level Shifters Enable */
|
|
#define SLCR_LVL_SHFTR_EN_OFFSET 0x900
|
|
|
|
/* Constant Definitions */
|
|
|
|
/* Control Register */
|
|
#define CTRL_OFFSET 0x00
|
|
/* Lock Register */
|
|
#define LOCK_OFFSET 0x04
|
|
/* Interrupt Status Register */
|
|
#define INT_STS_OFFSET 0x0c
|
|
/* Interrupt Mask Register */
|
|
#define INT_MASK_OFFSET 0x10
|
|
/* Status Register */
|
|
#define STATUS_OFFSET 0x14
|
|
/* DMA Source Address Register */
|
|
#define DMA_SRC_ADDR_OFFSET 0x18
|
|
/* DMA Destination Address Reg */
|
|
#define DMA_DST_ADDR_OFFSET 0x1c
|
|
/* DMA Source Transfer Length */
|
|
#define DMA_SRC_LEN_OFFSET 0x20
|
|
/* DMA Destination Transfer */
|
|
#define DMA_DEST_LEN_OFFSET 0x24
|
|
/* Unlock Register */
|
|
#define UNLOCK_OFFSET 0x34
|
|
/* Misc. Control Register */
|
|
#define MCTRL_OFFSET 0x80
|
|
|
|
/* Control Register Bit definitions */
|
|
|
|
/* Signal to reset FPGA */
|
|
#define CTRL_PCFG_PROG_B_MASK BIT(30)
|
|
/* Enable PCAP for PR */
|
|
#define CTRL_PCAP_PR_MASK BIT(27)
|
|
/* Enable PCAP */
|
|
#define CTRL_PCAP_MODE_MASK BIT(26)
|
|
/* Lower rate to allow decrypt on the fly */
|
|
#define CTRL_PCAP_RATE_EN_MASK BIT(25)
|
|
/* System booted in secure mode */
|
|
#define CTRL_SEC_EN_MASK BIT(7)
|
|
|
|
/* Miscellaneous Control Register bit definitions */
|
|
/* Internal PCAP loopback */
|
|
#define MCTRL_PCAP_LPBK_MASK BIT(4)
|
|
|
|
/* Status register bit definitions */
|
|
|
|
/* FPGA init status */
|
|
#define STATUS_DMA_Q_F BIT(31)
|
|
#define STATUS_DMA_Q_E BIT(30)
|
|
#define STATUS_PCFG_INIT_MASK BIT(4)
|
|
|
|
/* Interrupt Status/Mask Register Bit definitions */
|
|
/* DMA command done */
|
|
#define IXR_DMA_DONE_MASK BIT(13)
|
|
/* DMA and PCAP cmd done */
|
|
#define IXR_D_P_DONE_MASK BIT(12)
|
|
/* FPGA programmed */
|
|
#define IXR_PCFG_DONE_MASK BIT(2)
|
|
#define IXR_ERROR_FLAGS_MASK 0x00F0C860
|
|
#define IXR_ALL_MASK 0xF8F7F87F
|
|
|
|
/* Miscellaneous constant values */
|
|
|
|
/* Invalid DMA addr */
|
|
#define DMA_INVALID_ADDRESS GENMASK(31, 0)
|
|
/* Used to unlock the dev */
|
|
#define UNLOCK_MASK 0x757bdf0d
|
|
/* Timeout for polling reset bits */
|
|
#define INIT_POLL_TIMEOUT 2500000
|
|
/* Delay for polling reset bits */
|
|
#define INIT_POLL_DELAY 20
|
|
/* Signal this is the last DMA transfer, wait for the AXI and PCAP before
|
|
* interrupting
|
|
*/
|
|
#define DMA_SRC_LAST_TRANSFER 1
|
|
/* Timeout for DMA completion */
|
|
#define DMA_TIMEOUT_MS 5000
|
|
|
|
/* Masks for controlling stuff in SLCR */
|
|
/* Disable all Level shifters */
|
|
#define LVL_SHFTR_DISABLE_ALL_MASK 0x0
|
|
/* Enable Level shifters from PS to PL */
|
|
#define LVL_SHFTR_ENABLE_PS_TO_PL 0xa
|
|
/* Enable Level shifters from PL to PS */
|
|
#define LVL_SHFTR_ENABLE_PL_TO_PS 0xf
|
|
/* Enable global resets */
|
|
#define FPGA_RST_ALL_MASK 0xf
|
|
/* Disable global resets */
|
|
#define FPGA_RST_NONE_MASK 0x0
|
|
|
|
struct zynq_fpga_priv {
|
|
int irq;
|
|
struct clk *clk;
|
|
|
|
void __iomem *io_base;
|
|
struct regmap *slcr;
|
|
|
|
spinlock_t dma_lock;
|
|
unsigned int dma_elm;
|
|
unsigned int dma_nelms;
|
|
struct scatterlist *cur_sg;
|
|
|
|
struct completion dma_done;
|
|
};
|
|
|
|
static inline void zynq_fpga_write(struct zynq_fpga_priv *priv, u32 offset,
|
|
u32 val)
|
|
{
|
|
writel(val, priv->io_base + offset);
|
|
}
|
|
|
|
static inline u32 zynq_fpga_read(const struct zynq_fpga_priv *priv,
|
|
u32 offset)
|
|
{
|
|
return readl(priv->io_base + offset);
|
|
}
|
|
|
|
#define zynq_fpga_poll_timeout(priv, addr, val, cond, sleep_us, timeout_us) \
|
|
readl_poll_timeout(priv->io_base + addr, val, cond, sleep_us, \
|
|
timeout_us)
|
|
|
|
/* Cause the specified irq mask bits to generate IRQs */
|
|
static inline void zynq_fpga_set_irq(struct zynq_fpga_priv *priv, u32 enable)
|
|
{
|
|
zynq_fpga_write(priv, INT_MASK_OFFSET, ~enable);
|
|
}
|
|
|
|
/* Must be called with dma_lock held */
|
|
static void zynq_step_dma(struct zynq_fpga_priv *priv)
|
|
{
|
|
u32 addr;
|
|
u32 len;
|
|
bool first;
|
|
|
|
first = priv->dma_elm == 0;
|
|
while (priv->cur_sg) {
|
|
/* Feed the DMA queue until it is full. */
|
|
if (zynq_fpga_read(priv, STATUS_OFFSET) & STATUS_DMA_Q_F)
|
|
break;
|
|
|
|
addr = sg_dma_address(priv->cur_sg);
|
|
len = sg_dma_len(priv->cur_sg);
|
|
if (priv->dma_elm + 1 == priv->dma_nelms) {
|
|
/* The last transfer waits for the PCAP to finish too,
|
|
* notice this also changes the irq_mask to ignore
|
|
* IXR_DMA_DONE_MASK which ensures we do not trigger
|
|
* the completion too early.
|
|
*/
|
|
addr |= DMA_SRC_LAST_TRANSFER;
|
|
priv->cur_sg = NULL;
|
|
} else {
|
|
priv->cur_sg = sg_next(priv->cur_sg);
|
|
priv->dma_elm++;
|
|
}
|
|
|
|
zynq_fpga_write(priv, DMA_SRC_ADDR_OFFSET, addr);
|
|
zynq_fpga_write(priv, DMA_DST_ADDR_OFFSET, DMA_INVALID_ADDRESS);
|
|
zynq_fpga_write(priv, DMA_SRC_LEN_OFFSET, len / 4);
|
|
zynq_fpga_write(priv, DMA_DEST_LEN_OFFSET, 0);
|
|
}
|
|
|
|
/* Once the first transfer is queued we can turn on the ISR, future
|
|
* calls to zynq_step_dma will happen from the ISR context. The
|
|
* dma_lock spinlock guarentees this handover is done coherently, the
|
|
* ISR enable is put at the end to avoid another CPU spinning in the
|
|
* ISR on this lock.
|
|
*/
|
|
if (first && priv->cur_sg) {
|
|
zynq_fpga_set_irq(priv,
|
|
IXR_DMA_DONE_MASK | IXR_ERROR_FLAGS_MASK);
|
|
} else if (!priv->cur_sg) {
|
|
/* The last transfer changes to DMA & PCAP mode since we do
|
|
* not want to continue until everything has been flushed into
|
|
* the PCAP.
|
|
*/
|
|
zynq_fpga_set_irq(priv,
|
|
IXR_D_P_DONE_MASK | IXR_ERROR_FLAGS_MASK);
|
|
}
|
|
}
|
|
|
|
static irqreturn_t zynq_fpga_isr(int irq, void *data)
|
|
{
|
|
struct zynq_fpga_priv *priv = data;
|
|
u32 intr_status;
|
|
|
|
/* If anything other than DMA completion is reported stop and hand
|
|
* control back to zynq_fpga_ops_write, something went wrong,
|
|
* otherwise progress the DMA.
|
|
*/
|
|
spin_lock(&priv->dma_lock);
|
|
intr_status = zynq_fpga_read(priv, INT_STS_OFFSET);
|
|
if (!(intr_status & IXR_ERROR_FLAGS_MASK) &&
|
|
(intr_status & IXR_DMA_DONE_MASK) && priv->cur_sg) {
|
|
zynq_fpga_write(priv, INT_STS_OFFSET, IXR_DMA_DONE_MASK);
|
|
zynq_step_dma(priv);
|
|
spin_unlock(&priv->dma_lock);
|
|
return IRQ_HANDLED;
|
|
}
|
|
spin_unlock(&priv->dma_lock);
|
|
|
|
zynq_fpga_set_irq(priv, 0);
|
|
complete(&priv->dma_done);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* Sanity check the proposed bitstream. It must start with the sync word in
|
|
* the correct byte order, and be dword aligned. The input is a Xilinx .bin
|
|
* file with every 32 bit quantity swapped.
|
|
*/
|
|
static bool zynq_fpga_has_sync(const u8 *buf, size_t count)
|
|
{
|
|
for (; count >= 4; buf += 4, count -= 4)
|
|
if (buf[0] == 0x66 && buf[1] == 0x55 && buf[2] == 0x99 &&
|
|
buf[3] == 0xaa)
|
|
return true;
|
|
return false;
|
|
}
|
|
|
|
static int zynq_fpga_ops_write_init(struct fpga_manager *mgr,
|
|
struct fpga_image_info *info,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct zynq_fpga_priv *priv;
|
|
u32 ctrl, status;
|
|
int err;
|
|
|
|
priv = mgr->priv;
|
|
|
|
err = clk_enable(priv->clk);
|
|
if (err)
|
|
return err;
|
|
|
|
/* check if bitstream is encrypted & and system's still secure */
|
|
if (info->flags & FPGA_MGR_ENCRYPTED_BITSTREAM) {
|
|
ctrl = zynq_fpga_read(priv, CTRL_OFFSET);
|
|
if (!(ctrl & CTRL_SEC_EN_MASK)) {
|
|
dev_err(&mgr->dev,
|
|
"System not secure, can't use crypted bitstreams\n");
|
|
err = -EINVAL;
|
|
goto out_err;
|
|
}
|
|
}
|
|
|
|
/* don't globally reset PL if we're doing partial reconfig */
|
|
if (!(info->flags & FPGA_MGR_PARTIAL_RECONFIG)) {
|
|
if (!zynq_fpga_has_sync(buf, count)) {
|
|
dev_err(&mgr->dev,
|
|
"Invalid bitstream, could not find a sync word. Bitstream must be a byte swapped .bin file\n");
|
|
err = -EINVAL;
|
|
goto out_err;
|
|
}
|
|
|
|
/* assert AXI interface resets */
|
|
regmap_write(priv->slcr, SLCR_FPGA_RST_CTRL_OFFSET,
|
|
FPGA_RST_ALL_MASK);
|
|
|
|
/* disable all level shifters */
|
|
regmap_write(priv->slcr, SLCR_LVL_SHFTR_EN_OFFSET,
|
|
LVL_SHFTR_DISABLE_ALL_MASK);
|
|
/* enable level shifters from PS to PL */
|
|
regmap_write(priv->slcr, SLCR_LVL_SHFTR_EN_OFFSET,
|
|
LVL_SHFTR_ENABLE_PS_TO_PL);
|
|
|
|
/* create a rising edge on PCFG_INIT. PCFG_INIT follows
|
|
* PCFG_PROG_B, so we need to poll it after setting PCFG_PROG_B
|
|
* to make sure the rising edge actually happens.
|
|
* Note: PCFG_PROG_B is low active, sequence as described in
|
|
* UG585 v1.10 page 211
|
|
*/
|
|
ctrl = zynq_fpga_read(priv, CTRL_OFFSET);
|
|
ctrl |= CTRL_PCFG_PROG_B_MASK;
|
|
|
|
zynq_fpga_write(priv, CTRL_OFFSET, ctrl);
|
|
|
|
err = zynq_fpga_poll_timeout(priv, STATUS_OFFSET, status,
|
|
status & STATUS_PCFG_INIT_MASK,
|
|
INIT_POLL_DELAY,
|
|
INIT_POLL_TIMEOUT);
|
|
if (err) {
|
|
dev_err(&mgr->dev, "Timeout waiting for PCFG_INIT\n");
|
|
goto out_err;
|
|
}
|
|
|
|
ctrl = zynq_fpga_read(priv, CTRL_OFFSET);
|
|
ctrl &= ~CTRL_PCFG_PROG_B_MASK;
|
|
|
|
zynq_fpga_write(priv, CTRL_OFFSET, ctrl);
|
|
|
|
err = zynq_fpga_poll_timeout(priv, STATUS_OFFSET, status,
|
|
!(status & STATUS_PCFG_INIT_MASK),
|
|
INIT_POLL_DELAY,
|
|
INIT_POLL_TIMEOUT);
|
|
if (err) {
|
|
dev_err(&mgr->dev, "Timeout waiting for !PCFG_INIT\n");
|
|
goto out_err;
|
|
}
|
|
|
|
ctrl = zynq_fpga_read(priv, CTRL_OFFSET);
|
|
ctrl |= CTRL_PCFG_PROG_B_MASK;
|
|
|
|
zynq_fpga_write(priv, CTRL_OFFSET, ctrl);
|
|
|
|
err = zynq_fpga_poll_timeout(priv, STATUS_OFFSET, status,
|
|
status & STATUS_PCFG_INIT_MASK,
|
|
INIT_POLL_DELAY,
|
|
INIT_POLL_TIMEOUT);
|
|
if (err) {
|
|
dev_err(&mgr->dev, "Timeout waiting for PCFG_INIT\n");
|
|
goto out_err;
|
|
}
|
|
}
|
|
|
|
/* set configuration register with following options:
|
|
* - enable PCAP interface
|
|
* - set throughput for maximum speed (if bistream not crypted)
|
|
* - set CPU in user mode
|
|
*/
|
|
ctrl = zynq_fpga_read(priv, CTRL_OFFSET);
|
|
if (info->flags & FPGA_MGR_ENCRYPTED_BITSTREAM)
|
|
zynq_fpga_write(priv, CTRL_OFFSET,
|
|
(CTRL_PCAP_PR_MASK | CTRL_PCAP_MODE_MASK
|
|
| CTRL_PCAP_RATE_EN_MASK | ctrl));
|
|
else
|
|
zynq_fpga_write(priv, CTRL_OFFSET,
|
|
(CTRL_PCAP_PR_MASK | CTRL_PCAP_MODE_MASK
|
|
| ctrl));
|
|
|
|
|
|
/* We expect that the command queue is empty right now. */
|
|
status = zynq_fpga_read(priv, STATUS_OFFSET);
|
|
if ((status & STATUS_DMA_Q_F) ||
|
|
(status & STATUS_DMA_Q_E) != STATUS_DMA_Q_E) {
|
|
dev_err(&mgr->dev, "DMA command queue not right\n");
|
|
err = -EBUSY;
|
|
goto out_err;
|
|
}
|
|
|
|
/* ensure internal PCAP loopback is disabled */
|
|
ctrl = zynq_fpga_read(priv, MCTRL_OFFSET);
|
|
zynq_fpga_write(priv, MCTRL_OFFSET, (~MCTRL_PCAP_LPBK_MASK & ctrl));
|
|
|
|
clk_disable(priv->clk);
|
|
|
|
return 0;
|
|
|
|
out_err:
|
|
clk_disable(priv->clk);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int zynq_fpga_ops_write(struct fpga_manager *mgr, struct sg_table *sgt)
|
|
{
|
|
struct zynq_fpga_priv *priv;
|
|
const char *why;
|
|
int err;
|
|
u32 intr_status;
|
|
unsigned long timeout;
|
|
unsigned long flags;
|
|
struct scatterlist *sg;
|
|
int i;
|
|
|
|
priv = mgr->priv;
|
|
|
|
/* The hardware can only DMA multiples of 4 bytes, and it requires the
|
|
* starting addresses to be aligned to 64 bits (UG585 pg 212).
|
|
*/
|
|
for_each_sg(sgt->sgl, sg, sgt->nents, i) {
|
|
if ((sg->offset % 8) || (sg->length % 4)) {
|
|
dev_err(&mgr->dev,
|
|
"Invalid bitstream, chunks must be aligned\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
priv->dma_nelms =
|
|
dma_map_sg(mgr->dev.parent, sgt->sgl, sgt->nents, DMA_TO_DEVICE);
|
|
if (priv->dma_nelms == 0) {
|
|
dev_err(&mgr->dev, "Unable to DMA map (TO_DEVICE)\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* enable clock */
|
|
err = clk_enable(priv->clk);
|
|
if (err)
|
|
goto out_free;
|
|
|
|
zynq_fpga_write(priv, INT_STS_OFFSET, IXR_ALL_MASK);
|
|
reinit_completion(&priv->dma_done);
|
|
|
|
/* zynq_step_dma will turn on interrupts */
|
|
spin_lock_irqsave(&priv->dma_lock, flags);
|
|
priv->dma_elm = 0;
|
|
priv->cur_sg = sgt->sgl;
|
|
zynq_step_dma(priv);
|
|
spin_unlock_irqrestore(&priv->dma_lock, flags);
|
|
|
|
timeout = wait_for_completion_timeout(&priv->dma_done,
|
|
msecs_to_jiffies(DMA_TIMEOUT_MS));
|
|
|
|
spin_lock_irqsave(&priv->dma_lock, flags);
|
|
zynq_fpga_set_irq(priv, 0);
|
|
priv->cur_sg = NULL;
|
|
spin_unlock_irqrestore(&priv->dma_lock, flags);
|
|
|
|
intr_status = zynq_fpga_read(priv, INT_STS_OFFSET);
|
|
zynq_fpga_write(priv, INT_STS_OFFSET, IXR_ALL_MASK);
|
|
|
|
/* There doesn't seem to be a way to force cancel any DMA, so if
|
|
* something went wrong we are relying on the hardware to have halted
|
|
* the DMA before we get here, if there was we could use
|
|
* wait_for_completion_interruptible too.
|
|
*/
|
|
|
|
if (intr_status & IXR_ERROR_FLAGS_MASK) {
|
|
why = "DMA reported error";
|
|
err = -EIO;
|
|
goto out_report;
|
|
}
|
|
|
|
if (priv->cur_sg ||
|
|
!((intr_status & IXR_D_P_DONE_MASK) == IXR_D_P_DONE_MASK)) {
|
|
if (timeout == 0)
|
|
why = "DMA timed out";
|
|
else
|
|
why = "DMA did not complete";
|
|
err = -EIO;
|
|
goto out_report;
|
|
}
|
|
|
|
err = 0;
|
|
goto out_clk;
|
|
|
|
out_report:
|
|
dev_err(&mgr->dev,
|
|
"%s: INT_STS:0x%x CTRL:0x%x LOCK:0x%x INT_MASK:0x%x STATUS:0x%x MCTRL:0x%x\n",
|
|
why,
|
|
intr_status,
|
|
zynq_fpga_read(priv, CTRL_OFFSET),
|
|
zynq_fpga_read(priv, LOCK_OFFSET),
|
|
zynq_fpga_read(priv, INT_MASK_OFFSET),
|
|
zynq_fpga_read(priv, STATUS_OFFSET),
|
|
zynq_fpga_read(priv, MCTRL_OFFSET));
|
|
|
|
out_clk:
|
|
clk_disable(priv->clk);
|
|
|
|
out_free:
|
|
dma_unmap_sg(mgr->dev.parent, sgt->sgl, sgt->nents, DMA_TO_DEVICE);
|
|
return err;
|
|
}
|
|
|
|
static int zynq_fpga_ops_write_complete(struct fpga_manager *mgr,
|
|
struct fpga_image_info *info)
|
|
{
|
|
struct zynq_fpga_priv *priv = mgr->priv;
|
|
int err;
|
|
u32 intr_status;
|
|
|
|
err = clk_enable(priv->clk);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Release 'PR' control back to the ICAP */
|
|
zynq_fpga_write(priv, CTRL_OFFSET,
|
|
zynq_fpga_read(priv, CTRL_OFFSET) & ~CTRL_PCAP_PR_MASK);
|
|
|
|
err = zynq_fpga_poll_timeout(priv, INT_STS_OFFSET, intr_status,
|
|
intr_status & IXR_PCFG_DONE_MASK,
|
|
INIT_POLL_DELAY,
|
|
INIT_POLL_TIMEOUT);
|
|
|
|
clk_disable(priv->clk);
|
|
|
|
if (err)
|
|
return err;
|
|
|
|
/* for the partial reconfig case we didn't touch the level shifters */
|
|
if (!(info->flags & FPGA_MGR_PARTIAL_RECONFIG)) {
|
|
/* enable level shifters from PL to PS */
|
|
regmap_write(priv->slcr, SLCR_LVL_SHFTR_EN_OFFSET,
|
|
LVL_SHFTR_ENABLE_PL_TO_PS);
|
|
|
|
/* deassert AXI interface resets */
|
|
regmap_write(priv->slcr, SLCR_FPGA_RST_CTRL_OFFSET,
|
|
FPGA_RST_NONE_MASK);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static enum fpga_mgr_states zynq_fpga_ops_state(struct fpga_manager *mgr)
|
|
{
|
|
int err;
|
|
u32 intr_status;
|
|
struct zynq_fpga_priv *priv;
|
|
|
|
priv = mgr->priv;
|
|
|
|
err = clk_enable(priv->clk);
|
|
if (err)
|
|
return FPGA_MGR_STATE_UNKNOWN;
|
|
|
|
intr_status = zynq_fpga_read(priv, INT_STS_OFFSET);
|
|
clk_disable(priv->clk);
|
|
|
|
if (intr_status & IXR_PCFG_DONE_MASK)
|
|
return FPGA_MGR_STATE_OPERATING;
|
|
|
|
return FPGA_MGR_STATE_UNKNOWN;
|
|
}
|
|
|
|
static const struct fpga_manager_ops zynq_fpga_ops = {
|
|
.initial_header_size = 128,
|
|
.state = zynq_fpga_ops_state,
|
|
.write_init = zynq_fpga_ops_write_init,
|
|
.write_sg = zynq_fpga_ops_write,
|
|
.write_complete = zynq_fpga_ops_write_complete,
|
|
};
|
|
|
|
static int zynq_fpga_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct zynq_fpga_priv *priv;
|
|
struct fpga_manager *mgr;
|
|
struct resource *res;
|
|
int err;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
spin_lock_init(&priv->dma_lock);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
priv->io_base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(priv->io_base))
|
|
return PTR_ERR(priv->io_base);
|
|
|
|
priv->slcr = syscon_regmap_lookup_by_phandle(dev->of_node,
|
|
"syscon");
|
|
if (IS_ERR(priv->slcr)) {
|
|
dev_err(dev, "unable to get zynq-slcr regmap\n");
|
|
return PTR_ERR(priv->slcr);
|
|
}
|
|
|
|
init_completion(&priv->dma_done);
|
|
|
|
priv->irq = platform_get_irq(pdev, 0);
|
|
if (priv->irq < 0) {
|
|
dev_err(dev, "No IRQ available\n");
|
|
return priv->irq;
|
|
}
|
|
|
|
priv->clk = devm_clk_get(dev, "ref_clk");
|
|
if (IS_ERR(priv->clk)) {
|
|
dev_err(dev, "input clock not found\n");
|
|
return PTR_ERR(priv->clk);
|
|
}
|
|
|
|
err = clk_prepare_enable(priv->clk);
|
|
if (err) {
|
|
dev_err(dev, "unable to enable clock\n");
|
|
return err;
|
|
}
|
|
|
|
/* unlock the device */
|
|
zynq_fpga_write(priv, UNLOCK_OFFSET, UNLOCK_MASK);
|
|
|
|
zynq_fpga_set_irq(priv, 0);
|
|
zynq_fpga_write(priv, INT_STS_OFFSET, IXR_ALL_MASK);
|
|
err = devm_request_irq(dev, priv->irq, zynq_fpga_isr, 0, dev_name(dev),
|
|
priv);
|
|
if (err) {
|
|
dev_err(dev, "unable to request IRQ\n");
|
|
clk_disable_unprepare(priv->clk);
|
|
return err;
|
|
}
|
|
|
|
clk_disable(priv->clk);
|
|
|
|
mgr = devm_fpga_mgr_create(dev, "Xilinx Zynq FPGA Manager",
|
|
&zynq_fpga_ops, priv);
|
|
if (!mgr)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, mgr);
|
|
|
|
err = fpga_mgr_register(mgr);
|
|
if (err) {
|
|
dev_err(dev, "unable to register FPGA manager\n");
|
|
clk_unprepare(priv->clk);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int zynq_fpga_remove(struct platform_device *pdev)
|
|
{
|
|
struct zynq_fpga_priv *priv;
|
|
struct fpga_manager *mgr;
|
|
|
|
mgr = platform_get_drvdata(pdev);
|
|
priv = mgr->priv;
|
|
|
|
fpga_mgr_unregister(mgr);
|
|
|
|
clk_unprepare(priv->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id zynq_fpga_of_match[] = {
|
|
{ .compatible = "xlnx,zynq-devcfg-1.0", },
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, zynq_fpga_of_match);
|
|
#endif
|
|
|
|
static struct platform_driver zynq_fpga_driver = {
|
|
.probe = zynq_fpga_probe,
|
|
.remove = zynq_fpga_remove,
|
|
.driver = {
|
|
.name = "zynq_fpga_manager",
|
|
.of_match_table = of_match_ptr(zynq_fpga_of_match),
|
|
},
|
|
};
|
|
|
|
module_platform_driver(zynq_fpga_driver);
|
|
|
|
MODULE_AUTHOR("Moritz Fischer <moritz.fischer@ettus.com>");
|
|
MODULE_AUTHOR("Michal Simek <michal.simek@xilinx.com>");
|
|
MODULE_DESCRIPTION("Xilinx Zynq FPGA Manager");
|
|
MODULE_LICENSE("GPL v2");
|