forked from Minki/linux
740c68a0cd
Add Buddha PATA controller driver. It enables libata support for the Buddha, Catweasel and X-Surf expansion boards on the Zorro expansion bus. Module removal is currently unsupported (the old IDE's buddha driver also doesn't support it). Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
258 lines
6.3 KiB
C
258 lines
6.3 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
/*
|
|
* Buddha, Catweasel and X-Surf PATA controller driver
|
|
*
|
|
* Copyright (c) 2018 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
*
|
|
* Based on buddha.c:
|
|
*
|
|
* Copyright (C) 1997, 2001 by Geert Uytterhoeven and others
|
|
*/
|
|
|
|
#include <linux/ata.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/libata.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/module.h>
|
|
#include <linux/zorro.h>
|
|
#include <scsi/scsi_cmnd.h>
|
|
#include <scsi/scsi_host.h>
|
|
|
|
#include <asm/amigahw.h>
|
|
#include <asm/amigaints.h>
|
|
#include <asm/ide.h>
|
|
#include <asm/setup.h>
|
|
|
|
#define DRV_NAME "pata_buddha"
|
|
#define DRV_VERSION "0.1.0"
|
|
|
|
#define BUDDHA_BASE1 0x800
|
|
#define BUDDHA_BASE2 0xa00
|
|
#define BUDDHA_BASE3 0xc00
|
|
#define XSURF_BASE1 0xb000 /* 2.5" interface */
|
|
#define XSURF_BASE2 0xd000 /* 3.5" interface */
|
|
#define BUDDHA_CONTROL 0x11a
|
|
#define BUDDHA_IRQ 0xf00
|
|
#define XSURF_IRQ 0x7e
|
|
#define BUDDHA_IRQ_MR 0xfc0 /* master interrupt enable */
|
|
|
|
enum {
|
|
BOARD_BUDDHA = 0,
|
|
BOARD_CATWEASEL,
|
|
BOARD_XSURF
|
|
};
|
|
|
|
static unsigned int buddha_bases[3] __initdata = {
|
|
BUDDHA_BASE1, BUDDHA_BASE2, BUDDHA_BASE3
|
|
};
|
|
|
|
static unsigned int xsurf_bases[2] __initdata = {
|
|
XSURF_BASE1, XSURF_BASE2
|
|
};
|
|
|
|
static struct scsi_host_template pata_buddha_sht = {
|
|
ATA_PIO_SHT(DRV_NAME),
|
|
};
|
|
|
|
/* FIXME: is this needed? */
|
|
static unsigned int pata_buddha_data_xfer(struct ata_queued_cmd *qc,
|
|
unsigned char *buf,
|
|
unsigned int buflen, int rw)
|
|
{
|
|
struct ata_device *dev = qc->dev;
|
|
struct ata_port *ap = dev->link->ap;
|
|
void __iomem *data_addr = ap->ioaddr.data_addr;
|
|
unsigned int words = buflen >> 1;
|
|
|
|
/* Transfer multiple of 2 bytes */
|
|
if (rw == READ)
|
|
raw_insw((u16 *)data_addr, (u16 *)buf, words);
|
|
else
|
|
raw_outsw((u16 *)data_addr, (u16 *)buf, words);
|
|
|
|
/* Transfer trailing byte, if any. */
|
|
if (unlikely(buflen & 0x01)) {
|
|
unsigned char pad[2] = { };
|
|
|
|
/* Point buf to the tail of buffer */
|
|
buf += buflen - 1;
|
|
|
|
if (rw == READ) {
|
|
raw_insw((u16 *)data_addr, (u16 *)pad, 1);
|
|
*buf = pad[0];
|
|
} else {
|
|
pad[0] = *buf;
|
|
raw_outsw((u16 *)data_addr, (u16 *)pad, 1);
|
|
}
|
|
words++;
|
|
}
|
|
|
|
return words << 1;
|
|
}
|
|
|
|
/*
|
|
* Provide our own set_mode() as we don't want to change anything that has
|
|
* already been configured..
|
|
*/
|
|
static int pata_buddha_set_mode(struct ata_link *link,
|
|
struct ata_device **unused)
|
|
{
|
|
struct ata_device *dev;
|
|
|
|
ata_for_each_dev(dev, link, ENABLED) {
|
|
/* We don't really care */
|
|
dev->pio_mode = dev->xfer_mode = XFER_PIO_0;
|
|
dev->xfer_shift = ATA_SHIFT_PIO;
|
|
dev->flags |= ATA_DFLAG_PIO;
|
|
ata_dev_info(dev, "configured for PIO\n");
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static bool pata_buddha_irq_check(struct ata_port *ap)
|
|
{
|
|
u8 ch;
|
|
|
|
ch = z_readb((unsigned long)ap->private_data);
|
|
|
|
return !!(ch & 0x80);
|
|
}
|
|
|
|
static void pata_xsurf_irq_clear(struct ata_port *ap)
|
|
{
|
|
z_writeb(0, (unsigned long)ap->private_data);
|
|
}
|
|
|
|
static struct ata_port_operations pata_buddha_ops = {
|
|
.inherits = &ata_sff_port_ops,
|
|
.sff_data_xfer = pata_buddha_data_xfer,
|
|
.sff_irq_check = pata_buddha_irq_check,
|
|
.cable_detect = ata_cable_unknown,
|
|
.set_mode = pata_buddha_set_mode,
|
|
};
|
|
|
|
static struct ata_port_operations pata_xsurf_ops = {
|
|
.inherits = &ata_sff_port_ops,
|
|
.sff_data_xfer = pata_buddha_data_xfer,
|
|
.sff_irq_check = pata_buddha_irq_check,
|
|
.sff_irq_clear = pata_xsurf_irq_clear,
|
|
.cable_detect = ata_cable_unknown,
|
|
.set_mode = pata_buddha_set_mode,
|
|
};
|
|
|
|
static int __init pata_buddha_init_one(void)
|
|
{
|
|
struct zorro_dev *z = NULL;
|
|
|
|
while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
|
|
static const char *board_name[]
|
|
= { "Buddha", "Catweasel", "X-Surf" };
|
|
struct ata_host *host;
|
|
void __iomem *buddha_board;
|
|
unsigned long board;
|
|
unsigned int type, nr_ports = 2;
|
|
int i;
|
|
|
|
if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA) {
|
|
type = BOARD_BUDDHA;
|
|
} else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL) {
|
|
type = BOARD_CATWEASEL;
|
|
nr_ports++;
|
|
} else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF) {
|
|
type = BOARD_XSURF;
|
|
} else
|
|
continue;
|
|
|
|
dev_info(&z->dev, "%s IDE controller\n", board_name[type]);
|
|
|
|
board = z->resource.start;
|
|
|
|
if (type != BOARD_XSURF) {
|
|
if (!devm_request_mem_region(&z->dev,
|
|
board + BUDDHA_BASE1,
|
|
0x800, DRV_NAME))
|
|
continue;
|
|
} else {
|
|
if (!devm_request_mem_region(&z->dev,
|
|
board + XSURF_BASE1,
|
|
0x1000, DRV_NAME))
|
|
continue;
|
|
if (!devm_request_mem_region(&z->dev,
|
|
board + XSURF_BASE2,
|
|
0x1000, DRV_NAME))
|
|
continue;
|
|
}
|
|
|
|
/* allocate host */
|
|
host = ata_host_alloc(&z->dev, nr_ports);
|
|
if (!host)
|
|
continue;
|
|
|
|
buddha_board = ZTWO_VADDR(board);
|
|
|
|
/* enable the board IRQ on Buddha/Catweasel */
|
|
if (type != BOARD_XSURF)
|
|
z_writeb(0, buddha_board + BUDDHA_IRQ_MR);
|
|
|
|
for (i = 0; i < nr_ports; i++) {
|
|
struct ata_port *ap = host->ports[i];
|
|
void __iomem *base, *irqport;
|
|
unsigned long ctl = 0;
|
|
|
|
if (type != BOARD_XSURF) {
|
|
ap->ops = &pata_buddha_ops;
|
|
base = buddha_board + buddha_bases[i];
|
|
ctl = BUDDHA_CONTROL;
|
|
irqport = buddha_board + BUDDHA_IRQ + i * 0x40;
|
|
} else {
|
|
ap->ops = &pata_xsurf_ops;
|
|
base = buddha_board + xsurf_bases[i];
|
|
/* X-Surf has no CS1* (Control/AltStat) */
|
|
irqport = buddha_board + XSURF_IRQ;
|
|
}
|
|
|
|
ap->pio_mask = ATA_PIO4;
|
|
ap->flags |= ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
|
|
|
|
ap->ioaddr.data_addr = base;
|
|
ap->ioaddr.error_addr = base + 2 + 1 * 4;
|
|
ap->ioaddr.feature_addr = base + 2 + 1 * 4;
|
|
ap->ioaddr.nsect_addr = base + 2 + 2 * 4;
|
|
ap->ioaddr.lbal_addr = base + 2 + 3 * 4;
|
|
ap->ioaddr.lbam_addr = base + 2 + 4 * 4;
|
|
ap->ioaddr.lbah_addr = base + 2 + 5 * 4;
|
|
ap->ioaddr.device_addr = base + 2 + 6 * 4;
|
|
ap->ioaddr.status_addr = base + 2 + 7 * 4;
|
|
ap->ioaddr.command_addr = base + 2 + 7 * 4;
|
|
|
|
if (ctl) {
|
|
ap->ioaddr.altstatus_addr = base + ctl;
|
|
ap->ioaddr.ctl_addr = base + ctl;
|
|
}
|
|
|
|
ap->private_data = (void *)irqport;
|
|
|
|
ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", board,
|
|
ctl ? board + buddha_bases[i] + ctl : 0);
|
|
}
|
|
|
|
ata_host_activate(host, IRQ_AMIGA_PORTS, ata_sff_interrupt,
|
|
IRQF_SHARED, &pata_buddha_sht);
|
|
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
module_init(pata_buddha_init_one);
|
|
|
|
MODULE_AUTHOR("Bartlomiej Zolnierkiewicz");
|
|
MODULE_DESCRIPTION("low-level driver for Buddha/Catweasel/X-Surf PATA");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_VERSION(DRV_VERSION);
|