forked from Minki/linux
0d485ada40
XFS has hand-rolled per-cpu counters for the superblock since before there was any generic implementation. The free block counter is special in that it is used for ENOSPC detection outside transaction contexts for for delayed allocation. This means that the counter needs to be accurate at zero. The current per-cpu counter code jumps through lots of hoops to ensure we never run past zero, but we don't need to make all those jumps with the generic counter implementation. The generic counter implementation allows us to pass a "batch" threshold at which the addition/subtraction to the counter value will be folded back into global value under lock. We can use this feature to reduce the batch size as we approach 0 in a very similar manner to the existing counters and their rebalance algorithm. If we use a batch size of 1 as we approach 0, then every addition and subtraction will be done against the global value and hence allow accurate detection of zero threshold crossing. Hence we can replace the handrolled, accurate-at-zero counters with generic percpu counters. Note: this removes just enough of the icsb infrastructure to compile without warnings. The rest will go in subsequent commits. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
1968 lines
49 KiB
C
1968 lines
49 KiB
C
/*
|
|
* Copyright (c) 2000-2005 Silicon Graphics, Inc.
|
|
* All Rights Reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it would be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write the Free Software Foundation,
|
|
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
#include "xfs.h"
|
|
#include "xfs_fs.h"
|
|
#include "xfs_shared.h"
|
|
#include "xfs_format.h"
|
|
#include "xfs_log_format.h"
|
|
#include "xfs_trans_resv.h"
|
|
#include "xfs_bit.h"
|
|
#include "xfs_sb.h"
|
|
#include "xfs_mount.h"
|
|
#include "xfs_da_format.h"
|
|
#include "xfs_da_btree.h"
|
|
#include "xfs_inode.h"
|
|
#include "xfs_dir2.h"
|
|
#include "xfs_ialloc.h"
|
|
#include "xfs_alloc.h"
|
|
#include "xfs_rtalloc.h"
|
|
#include "xfs_bmap.h"
|
|
#include "xfs_trans.h"
|
|
#include "xfs_trans_priv.h"
|
|
#include "xfs_log.h"
|
|
#include "xfs_error.h"
|
|
#include "xfs_quota.h"
|
|
#include "xfs_fsops.h"
|
|
#include "xfs_trace.h"
|
|
#include "xfs_icache.h"
|
|
#include "xfs_sysfs.h"
|
|
|
|
|
|
#ifdef HAVE_PERCPU_SB
|
|
STATIC void xfs_icsb_balance_counter(xfs_mount_t *, xfs_sb_field_t,
|
|
int);
|
|
STATIC void xfs_icsb_balance_counter_locked(xfs_mount_t *, xfs_sb_field_t,
|
|
int);
|
|
STATIC void xfs_icsb_disable_counter(xfs_mount_t *, xfs_sb_field_t);
|
|
#else
|
|
|
|
#define xfs_icsb_balance_counter(mp, a, b) do { } while (0)
|
|
#define xfs_icsb_balance_counter_locked(mp, a, b) do { } while (0)
|
|
#endif
|
|
|
|
static DEFINE_MUTEX(xfs_uuid_table_mutex);
|
|
static int xfs_uuid_table_size;
|
|
static uuid_t *xfs_uuid_table;
|
|
|
|
/*
|
|
* See if the UUID is unique among mounted XFS filesystems.
|
|
* Mount fails if UUID is nil or a FS with the same UUID is already mounted.
|
|
*/
|
|
STATIC int
|
|
xfs_uuid_mount(
|
|
struct xfs_mount *mp)
|
|
{
|
|
uuid_t *uuid = &mp->m_sb.sb_uuid;
|
|
int hole, i;
|
|
|
|
if (mp->m_flags & XFS_MOUNT_NOUUID)
|
|
return 0;
|
|
|
|
if (uuid_is_nil(uuid)) {
|
|
xfs_warn(mp, "Filesystem has nil UUID - can't mount");
|
|
return -EINVAL;
|
|
}
|
|
|
|
mutex_lock(&xfs_uuid_table_mutex);
|
|
for (i = 0, hole = -1; i < xfs_uuid_table_size; i++) {
|
|
if (uuid_is_nil(&xfs_uuid_table[i])) {
|
|
hole = i;
|
|
continue;
|
|
}
|
|
if (uuid_equal(uuid, &xfs_uuid_table[i]))
|
|
goto out_duplicate;
|
|
}
|
|
|
|
if (hole < 0) {
|
|
xfs_uuid_table = kmem_realloc(xfs_uuid_table,
|
|
(xfs_uuid_table_size + 1) * sizeof(*xfs_uuid_table),
|
|
xfs_uuid_table_size * sizeof(*xfs_uuid_table),
|
|
KM_SLEEP);
|
|
hole = xfs_uuid_table_size++;
|
|
}
|
|
xfs_uuid_table[hole] = *uuid;
|
|
mutex_unlock(&xfs_uuid_table_mutex);
|
|
|
|
return 0;
|
|
|
|
out_duplicate:
|
|
mutex_unlock(&xfs_uuid_table_mutex);
|
|
xfs_warn(mp, "Filesystem has duplicate UUID %pU - can't mount", uuid);
|
|
return -EINVAL;
|
|
}
|
|
|
|
STATIC void
|
|
xfs_uuid_unmount(
|
|
struct xfs_mount *mp)
|
|
{
|
|
uuid_t *uuid = &mp->m_sb.sb_uuid;
|
|
int i;
|
|
|
|
if (mp->m_flags & XFS_MOUNT_NOUUID)
|
|
return;
|
|
|
|
mutex_lock(&xfs_uuid_table_mutex);
|
|
for (i = 0; i < xfs_uuid_table_size; i++) {
|
|
if (uuid_is_nil(&xfs_uuid_table[i]))
|
|
continue;
|
|
if (!uuid_equal(uuid, &xfs_uuid_table[i]))
|
|
continue;
|
|
memset(&xfs_uuid_table[i], 0, sizeof(uuid_t));
|
|
break;
|
|
}
|
|
ASSERT(i < xfs_uuid_table_size);
|
|
mutex_unlock(&xfs_uuid_table_mutex);
|
|
}
|
|
|
|
|
|
STATIC void
|
|
__xfs_free_perag(
|
|
struct rcu_head *head)
|
|
{
|
|
struct xfs_perag *pag = container_of(head, struct xfs_perag, rcu_head);
|
|
|
|
ASSERT(atomic_read(&pag->pag_ref) == 0);
|
|
kmem_free(pag);
|
|
}
|
|
|
|
/*
|
|
* Free up the per-ag resources associated with the mount structure.
|
|
*/
|
|
STATIC void
|
|
xfs_free_perag(
|
|
xfs_mount_t *mp)
|
|
{
|
|
xfs_agnumber_t agno;
|
|
struct xfs_perag *pag;
|
|
|
|
for (agno = 0; agno < mp->m_sb.sb_agcount; agno++) {
|
|
spin_lock(&mp->m_perag_lock);
|
|
pag = radix_tree_delete(&mp->m_perag_tree, agno);
|
|
spin_unlock(&mp->m_perag_lock);
|
|
ASSERT(pag);
|
|
ASSERT(atomic_read(&pag->pag_ref) == 0);
|
|
call_rcu(&pag->rcu_head, __xfs_free_perag);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Check size of device based on the (data/realtime) block count.
|
|
* Note: this check is used by the growfs code as well as mount.
|
|
*/
|
|
int
|
|
xfs_sb_validate_fsb_count(
|
|
xfs_sb_t *sbp,
|
|
__uint64_t nblocks)
|
|
{
|
|
ASSERT(PAGE_SHIFT >= sbp->sb_blocklog);
|
|
ASSERT(sbp->sb_blocklog >= BBSHIFT);
|
|
|
|
/* Limited by ULONG_MAX of page cache index */
|
|
if (nblocks >> (PAGE_CACHE_SHIFT - sbp->sb_blocklog) > ULONG_MAX)
|
|
return -EFBIG;
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
xfs_initialize_perag(
|
|
xfs_mount_t *mp,
|
|
xfs_agnumber_t agcount,
|
|
xfs_agnumber_t *maxagi)
|
|
{
|
|
xfs_agnumber_t index;
|
|
xfs_agnumber_t first_initialised = 0;
|
|
xfs_perag_t *pag;
|
|
xfs_agino_t agino;
|
|
xfs_ino_t ino;
|
|
xfs_sb_t *sbp = &mp->m_sb;
|
|
int error = -ENOMEM;
|
|
|
|
/*
|
|
* Walk the current per-ag tree so we don't try to initialise AGs
|
|
* that already exist (growfs case). Allocate and insert all the
|
|
* AGs we don't find ready for initialisation.
|
|
*/
|
|
for (index = 0; index < agcount; index++) {
|
|
pag = xfs_perag_get(mp, index);
|
|
if (pag) {
|
|
xfs_perag_put(pag);
|
|
continue;
|
|
}
|
|
if (!first_initialised)
|
|
first_initialised = index;
|
|
|
|
pag = kmem_zalloc(sizeof(*pag), KM_MAYFAIL);
|
|
if (!pag)
|
|
goto out_unwind;
|
|
pag->pag_agno = index;
|
|
pag->pag_mount = mp;
|
|
spin_lock_init(&pag->pag_ici_lock);
|
|
mutex_init(&pag->pag_ici_reclaim_lock);
|
|
INIT_RADIX_TREE(&pag->pag_ici_root, GFP_ATOMIC);
|
|
spin_lock_init(&pag->pag_buf_lock);
|
|
pag->pag_buf_tree = RB_ROOT;
|
|
|
|
if (radix_tree_preload(GFP_NOFS))
|
|
goto out_unwind;
|
|
|
|
spin_lock(&mp->m_perag_lock);
|
|
if (radix_tree_insert(&mp->m_perag_tree, index, pag)) {
|
|
BUG();
|
|
spin_unlock(&mp->m_perag_lock);
|
|
radix_tree_preload_end();
|
|
error = -EEXIST;
|
|
goto out_unwind;
|
|
}
|
|
spin_unlock(&mp->m_perag_lock);
|
|
radix_tree_preload_end();
|
|
}
|
|
|
|
/*
|
|
* If we mount with the inode64 option, or no inode overflows
|
|
* the legacy 32-bit address space clear the inode32 option.
|
|
*/
|
|
agino = XFS_OFFBNO_TO_AGINO(mp, sbp->sb_agblocks - 1, 0);
|
|
ino = XFS_AGINO_TO_INO(mp, agcount - 1, agino);
|
|
|
|
if ((mp->m_flags & XFS_MOUNT_SMALL_INUMS) && ino > XFS_MAXINUMBER_32)
|
|
mp->m_flags |= XFS_MOUNT_32BITINODES;
|
|
else
|
|
mp->m_flags &= ~XFS_MOUNT_32BITINODES;
|
|
|
|
if (mp->m_flags & XFS_MOUNT_32BITINODES)
|
|
index = xfs_set_inode32(mp, agcount);
|
|
else
|
|
index = xfs_set_inode64(mp, agcount);
|
|
|
|
if (maxagi)
|
|
*maxagi = index;
|
|
return 0;
|
|
|
|
out_unwind:
|
|
kmem_free(pag);
|
|
for (; index > first_initialised; index--) {
|
|
pag = radix_tree_delete(&mp->m_perag_tree, index);
|
|
kmem_free(pag);
|
|
}
|
|
return error;
|
|
}
|
|
|
|
/*
|
|
* xfs_readsb
|
|
*
|
|
* Does the initial read of the superblock.
|
|
*/
|
|
int
|
|
xfs_readsb(
|
|
struct xfs_mount *mp,
|
|
int flags)
|
|
{
|
|
unsigned int sector_size;
|
|
struct xfs_buf *bp;
|
|
struct xfs_sb *sbp = &mp->m_sb;
|
|
int error;
|
|
int loud = !(flags & XFS_MFSI_QUIET);
|
|
const struct xfs_buf_ops *buf_ops;
|
|
|
|
ASSERT(mp->m_sb_bp == NULL);
|
|
ASSERT(mp->m_ddev_targp != NULL);
|
|
|
|
/*
|
|
* For the initial read, we must guess at the sector
|
|
* size based on the block device. It's enough to
|
|
* get the sb_sectsize out of the superblock and
|
|
* then reread with the proper length.
|
|
* We don't verify it yet, because it may not be complete.
|
|
*/
|
|
sector_size = xfs_getsize_buftarg(mp->m_ddev_targp);
|
|
buf_ops = NULL;
|
|
|
|
/*
|
|
* Allocate a (locked) buffer to hold the superblock.
|
|
* This will be kept around at all times to optimize
|
|
* access to the superblock.
|
|
*/
|
|
reread:
|
|
error = xfs_buf_read_uncached(mp->m_ddev_targp, XFS_SB_DADDR,
|
|
BTOBB(sector_size), 0, &bp, buf_ops);
|
|
if (error) {
|
|
if (loud)
|
|
xfs_warn(mp, "SB validate failed with error %d.", error);
|
|
/* bad CRC means corrupted metadata */
|
|
if (error == -EFSBADCRC)
|
|
error = -EFSCORRUPTED;
|
|
return error;
|
|
}
|
|
|
|
/*
|
|
* Initialize the mount structure from the superblock.
|
|
*/
|
|
xfs_sb_from_disk(sbp, XFS_BUF_TO_SBP(bp));
|
|
|
|
/*
|
|
* If we haven't validated the superblock, do so now before we try
|
|
* to check the sector size and reread the superblock appropriately.
|
|
*/
|
|
if (sbp->sb_magicnum != XFS_SB_MAGIC) {
|
|
if (loud)
|
|
xfs_warn(mp, "Invalid superblock magic number");
|
|
error = -EINVAL;
|
|
goto release_buf;
|
|
}
|
|
|
|
/*
|
|
* We must be able to do sector-sized and sector-aligned IO.
|
|
*/
|
|
if (sector_size > sbp->sb_sectsize) {
|
|
if (loud)
|
|
xfs_warn(mp, "device supports %u byte sectors (not %u)",
|
|
sector_size, sbp->sb_sectsize);
|
|
error = -ENOSYS;
|
|
goto release_buf;
|
|
}
|
|
|
|
if (buf_ops == NULL) {
|
|
/*
|
|
* Re-read the superblock so the buffer is correctly sized,
|
|
* and properly verified.
|
|
*/
|
|
xfs_buf_relse(bp);
|
|
sector_size = sbp->sb_sectsize;
|
|
buf_ops = loud ? &xfs_sb_buf_ops : &xfs_sb_quiet_buf_ops;
|
|
goto reread;
|
|
}
|
|
|
|
/* Initialize per-cpu counters */
|
|
xfs_icsb_reinit_counters(mp);
|
|
|
|
/* no need to be quiet anymore, so reset the buf ops */
|
|
bp->b_ops = &xfs_sb_buf_ops;
|
|
|
|
mp->m_sb_bp = bp;
|
|
xfs_buf_unlock(bp);
|
|
return 0;
|
|
|
|
release_buf:
|
|
xfs_buf_relse(bp);
|
|
return error;
|
|
}
|
|
|
|
/*
|
|
* Update alignment values based on mount options and sb values
|
|
*/
|
|
STATIC int
|
|
xfs_update_alignment(xfs_mount_t *mp)
|
|
{
|
|
xfs_sb_t *sbp = &(mp->m_sb);
|
|
|
|
if (mp->m_dalign) {
|
|
/*
|
|
* If stripe unit and stripe width are not multiples
|
|
* of the fs blocksize turn off alignment.
|
|
*/
|
|
if ((BBTOB(mp->m_dalign) & mp->m_blockmask) ||
|
|
(BBTOB(mp->m_swidth) & mp->m_blockmask)) {
|
|
xfs_warn(mp,
|
|
"alignment check failed: sunit/swidth vs. blocksize(%d)",
|
|
sbp->sb_blocksize);
|
|
return -EINVAL;
|
|
} else {
|
|
/*
|
|
* Convert the stripe unit and width to FSBs.
|
|
*/
|
|
mp->m_dalign = XFS_BB_TO_FSBT(mp, mp->m_dalign);
|
|
if (mp->m_dalign && (sbp->sb_agblocks % mp->m_dalign)) {
|
|
xfs_warn(mp,
|
|
"alignment check failed: sunit/swidth vs. agsize(%d)",
|
|
sbp->sb_agblocks);
|
|
return -EINVAL;
|
|
} else if (mp->m_dalign) {
|
|
mp->m_swidth = XFS_BB_TO_FSBT(mp, mp->m_swidth);
|
|
} else {
|
|
xfs_warn(mp,
|
|
"alignment check failed: sunit(%d) less than bsize(%d)",
|
|
mp->m_dalign, sbp->sb_blocksize);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Update superblock with new values
|
|
* and log changes
|
|
*/
|
|
if (xfs_sb_version_hasdalign(sbp)) {
|
|
if (sbp->sb_unit != mp->m_dalign) {
|
|
sbp->sb_unit = mp->m_dalign;
|
|
mp->m_update_sb = true;
|
|
}
|
|
if (sbp->sb_width != mp->m_swidth) {
|
|
sbp->sb_width = mp->m_swidth;
|
|
mp->m_update_sb = true;
|
|
}
|
|
} else {
|
|
xfs_warn(mp,
|
|
"cannot change alignment: superblock does not support data alignment");
|
|
return -EINVAL;
|
|
}
|
|
} else if ((mp->m_flags & XFS_MOUNT_NOALIGN) != XFS_MOUNT_NOALIGN &&
|
|
xfs_sb_version_hasdalign(&mp->m_sb)) {
|
|
mp->m_dalign = sbp->sb_unit;
|
|
mp->m_swidth = sbp->sb_width;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Set the maximum inode count for this filesystem
|
|
*/
|
|
STATIC void
|
|
xfs_set_maxicount(xfs_mount_t *mp)
|
|
{
|
|
xfs_sb_t *sbp = &(mp->m_sb);
|
|
__uint64_t icount;
|
|
|
|
if (sbp->sb_imax_pct) {
|
|
/*
|
|
* Make sure the maximum inode count is a multiple
|
|
* of the units we allocate inodes in.
|
|
*/
|
|
icount = sbp->sb_dblocks * sbp->sb_imax_pct;
|
|
do_div(icount, 100);
|
|
do_div(icount, mp->m_ialloc_blks);
|
|
mp->m_maxicount = (icount * mp->m_ialloc_blks) <<
|
|
sbp->sb_inopblog;
|
|
} else {
|
|
mp->m_maxicount = 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Set the default minimum read and write sizes unless
|
|
* already specified in a mount option.
|
|
* We use smaller I/O sizes when the file system
|
|
* is being used for NFS service (wsync mount option).
|
|
*/
|
|
STATIC void
|
|
xfs_set_rw_sizes(xfs_mount_t *mp)
|
|
{
|
|
xfs_sb_t *sbp = &(mp->m_sb);
|
|
int readio_log, writeio_log;
|
|
|
|
if (!(mp->m_flags & XFS_MOUNT_DFLT_IOSIZE)) {
|
|
if (mp->m_flags & XFS_MOUNT_WSYNC) {
|
|
readio_log = XFS_WSYNC_READIO_LOG;
|
|
writeio_log = XFS_WSYNC_WRITEIO_LOG;
|
|
} else {
|
|
readio_log = XFS_READIO_LOG_LARGE;
|
|
writeio_log = XFS_WRITEIO_LOG_LARGE;
|
|
}
|
|
} else {
|
|
readio_log = mp->m_readio_log;
|
|
writeio_log = mp->m_writeio_log;
|
|
}
|
|
|
|
if (sbp->sb_blocklog > readio_log) {
|
|
mp->m_readio_log = sbp->sb_blocklog;
|
|
} else {
|
|
mp->m_readio_log = readio_log;
|
|
}
|
|
mp->m_readio_blocks = 1 << (mp->m_readio_log - sbp->sb_blocklog);
|
|
if (sbp->sb_blocklog > writeio_log) {
|
|
mp->m_writeio_log = sbp->sb_blocklog;
|
|
} else {
|
|
mp->m_writeio_log = writeio_log;
|
|
}
|
|
mp->m_writeio_blocks = 1 << (mp->m_writeio_log - sbp->sb_blocklog);
|
|
}
|
|
|
|
/*
|
|
* precalculate the low space thresholds for dynamic speculative preallocation.
|
|
*/
|
|
void
|
|
xfs_set_low_space_thresholds(
|
|
struct xfs_mount *mp)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < XFS_LOWSP_MAX; i++) {
|
|
__uint64_t space = mp->m_sb.sb_dblocks;
|
|
|
|
do_div(space, 100);
|
|
mp->m_low_space[i] = space * (i + 1);
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
* Set whether we're using inode alignment.
|
|
*/
|
|
STATIC void
|
|
xfs_set_inoalignment(xfs_mount_t *mp)
|
|
{
|
|
if (xfs_sb_version_hasalign(&mp->m_sb) &&
|
|
mp->m_sb.sb_inoalignmt >=
|
|
XFS_B_TO_FSBT(mp, mp->m_inode_cluster_size))
|
|
mp->m_inoalign_mask = mp->m_sb.sb_inoalignmt - 1;
|
|
else
|
|
mp->m_inoalign_mask = 0;
|
|
/*
|
|
* If we are using stripe alignment, check whether
|
|
* the stripe unit is a multiple of the inode alignment
|
|
*/
|
|
if (mp->m_dalign && mp->m_inoalign_mask &&
|
|
!(mp->m_dalign & mp->m_inoalign_mask))
|
|
mp->m_sinoalign = mp->m_dalign;
|
|
else
|
|
mp->m_sinoalign = 0;
|
|
}
|
|
|
|
/*
|
|
* Check that the data (and log if separate) is an ok size.
|
|
*/
|
|
STATIC int
|
|
xfs_check_sizes(
|
|
struct xfs_mount *mp)
|
|
{
|
|
struct xfs_buf *bp;
|
|
xfs_daddr_t d;
|
|
int error;
|
|
|
|
d = (xfs_daddr_t)XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks);
|
|
if (XFS_BB_TO_FSB(mp, d) != mp->m_sb.sb_dblocks) {
|
|
xfs_warn(mp, "filesystem size mismatch detected");
|
|
return -EFBIG;
|
|
}
|
|
error = xfs_buf_read_uncached(mp->m_ddev_targp,
|
|
d - XFS_FSS_TO_BB(mp, 1),
|
|
XFS_FSS_TO_BB(mp, 1), 0, &bp, NULL);
|
|
if (error) {
|
|
xfs_warn(mp, "last sector read failed");
|
|
return error;
|
|
}
|
|
xfs_buf_relse(bp);
|
|
|
|
if (mp->m_logdev_targp == mp->m_ddev_targp)
|
|
return 0;
|
|
|
|
d = (xfs_daddr_t)XFS_FSB_TO_BB(mp, mp->m_sb.sb_logblocks);
|
|
if (XFS_BB_TO_FSB(mp, d) != mp->m_sb.sb_logblocks) {
|
|
xfs_warn(mp, "log size mismatch detected");
|
|
return -EFBIG;
|
|
}
|
|
error = xfs_buf_read_uncached(mp->m_logdev_targp,
|
|
d - XFS_FSB_TO_BB(mp, 1),
|
|
XFS_FSB_TO_BB(mp, 1), 0, &bp, NULL);
|
|
if (error) {
|
|
xfs_warn(mp, "log device read failed");
|
|
return error;
|
|
}
|
|
xfs_buf_relse(bp);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Clear the quotaflags in memory and in the superblock.
|
|
*/
|
|
int
|
|
xfs_mount_reset_sbqflags(
|
|
struct xfs_mount *mp)
|
|
{
|
|
mp->m_qflags = 0;
|
|
|
|
/* It is OK to look at sb_qflags in the mount path without m_sb_lock. */
|
|
if (mp->m_sb.sb_qflags == 0)
|
|
return 0;
|
|
spin_lock(&mp->m_sb_lock);
|
|
mp->m_sb.sb_qflags = 0;
|
|
spin_unlock(&mp->m_sb_lock);
|
|
|
|
if (!xfs_fs_writable(mp, SB_FREEZE_WRITE))
|
|
return 0;
|
|
|
|
return xfs_sync_sb(mp, false);
|
|
}
|
|
|
|
__uint64_t
|
|
xfs_default_resblks(xfs_mount_t *mp)
|
|
{
|
|
__uint64_t resblks;
|
|
|
|
/*
|
|
* We default to 5% or 8192 fsbs of space reserved, whichever is
|
|
* smaller. This is intended to cover concurrent allocation
|
|
* transactions when we initially hit enospc. These each require a 4
|
|
* block reservation. Hence by default we cover roughly 2000 concurrent
|
|
* allocation reservations.
|
|
*/
|
|
resblks = mp->m_sb.sb_dblocks;
|
|
do_div(resblks, 20);
|
|
resblks = min_t(__uint64_t, resblks, 8192);
|
|
return resblks;
|
|
}
|
|
|
|
/*
|
|
* This function does the following on an initial mount of a file system:
|
|
* - reads the superblock from disk and init the mount struct
|
|
* - if we're a 32-bit kernel, do a size check on the superblock
|
|
* so we don't mount terabyte filesystems
|
|
* - init mount struct realtime fields
|
|
* - allocate inode hash table for fs
|
|
* - init directory manager
|
|
* - perform recovery and init the log manager
|
|
*/
|
|
int
|
|
xfs_mountfs(
|
|
xfs_mount_t *mp)
|
|
{
|
|
xfs_sb_t *sbp = &(mp->m_sb);
|
|
xfs_inode_t *rip;
|
|
__uint64_t resblks;
|
|
uint quotamount = 0;
|
|
uint quotaflags = 0;
|
|
int error = 0;
|
|
|
|
xfs_sb_mount_common(mp, sbp);
|
|
|
|
/*
|
|
* Check for a mismatched features2 values. Older kernels read & wrote
|
|
* into the wrong sb offset for sb_features2 on some platforms due to
|
|
* xfs_sb_t not being 64bit size aligned when sb_features2 was added,
|
|
* which made older superblock reading/writing routines swap it as a
|
|
* 64-bit value.
|
|
*
|
|
* For backwards compatibility, we make both slots equal.
|
|
*
|
|
* If we detect a mismatched field, we OR the set bits into the existing
|
|
* features2 field in case it has already been modified; we don't want
|
|
* to lose any features. We then update the bad location with the ORed
|
|
* value so that older kernels will see any features2 flags. The
|
|
* superblock writeback code ensures the new sb_features2 is copied to
|
|
* sb_bad_features2 before it is logged or written to disk.
|
|
*/
|
|
if (xfs_sb_has_mismatched_features2(sbp)) {
|
|
xfs_warn(mp, "correcting sb_features alignment problem");
|
|
sbp->sb_features2 |= sbp->sb_bad_features2;
|
|
mp->m_update_sb = true;
|
|
|
|
/*
|
|
* Re-check for ATTR2 in case it was found in bad_features2
|
|
* slot.
|
|
*/
|
|
if (xfs_sb_version_hasattr2(&mp->m_sb) &&
|
|
!(mp->m_flags & XFS_MOUNT_NOATTR2))
|
|
mp->m_flags |= XFS_MOUNT_ATTR2;
|
|
}
|
|
|
|
if (xfs_sb_version_hasattr2(&mp->m_sb) &&
|
|
(mp->m_flags & XFS_MOUNT_NOATTR2)) {
|
|
xfs_sb_version_removeattr2(&mp->m_sb);
|
|
mp->m_update_sb = true;
|
|
|
|
/* update sb_versionnum for the clearing of the morebits */
|
|
if (!sbp->sb_features2)
|
|
mp->m_update_sb = true;
|
|
}
|
|
|
|
/* always use v2 inodes by default now */
|
|
if (!(mp->m_sb.sb_versionnum & XFS_SB_VERSION_NLINKBIT)) {
|
|
mp->m_sb.sb_versionnum |= XFS_SB_VERSION_NLINKBIT;
|
|
mp->m_update_sb = true;
|
|
}
|
|
|
|
/*
|
|
* Check if sb_agblocks is aligned at stripe boundary
|
|
* If sb_agblocks is NOT aligned turn off m_dalign since
|
|
* allocator alignment is within an ag, therefore ag has
|
|
* to be aligned at stripe boundary.
|
|
*/
|
|
error = xfs_update_alignment(mp);
|
|
if (error)
|
|
goto out;
|
|
|
|
xfs_alloc_compute_maxlevels(mp);
|
|
xfs_bmap_compute_maxlevels(mp, XFS_DATA_FORK);
|
|
xfs_bmap_compute_maxlevels(mp, XFS_ATTR_FORK);
|
|
xfs_ialloc_compute_maxlevels(mp);
|
|
|
|
xfs_set_maxicount(mp);
|
|
|
|
error = xfs_sysfs_init(&mp->m_kobj, &xfs_mp_ktype, NULL, mp->m_fsname);
|
|
if (error)
|
|
goto out;
|
|
|
|
error = xfs_uuid_mount(mp);
|
|
if (error)
|
|
goto out_remove_sysfs;
|
|
|
|
/*
|
|
* Set the minimum read and write sizes
|
|
*/
|
|
xfs_set_rw_sizes(mp);
|
|
|
|
/* set the low space thresholds for dynamic preallocation */
|
|
xfs_set_low_space_thresholds(mp);
|
|
|
|
/*
|
|
* Set the inode cluster size.
|
|
* This may still be overridden by the file system
|
|
* block size if it is larger than the chosen cluster size.
|
|
*
|
|
* For v5 filesystems, scale the cluster size with the inode size to
|
|
* keep a constant ratio of inode per cluster buffer, but only if mkfs
|
|
* has set the inode alignment value appropriately for larger cluster
|
|
* sizes.
|
|
*/
|
|
mp->m_inode_cluster_size = XFS_INODE_BIG_CLUSTER_SIZE;
|
|
if (xfs_sb_version_hascrc(&mp->m_sb)) {
|
|
int new_size = mp->m_inode_cluster_size;
|
|
|
|
new_size *= mp->m_sb.sb_inodesize / XFS_DINODE_MIN_SIZE;
|
|
if (mp->m_sb.sb_inoalignmt >= XFS_B_TO_FSBT(mp, new_size))
|
|
mp->m_inode_cluster_size = new_size;
|
|
}
|
|
|
|
/*
|
|
* Set inode alignment fields
|
|
*/
|
|
xfs_set_inoalignment(mp);
|
|
|
|
/*
|
|
* Check that the data (and log if separate) is an ok size.
|
|
*/
|
|
error = xfs_check_sizes(mp);
|
|
if (error)
|
|
goto out_remove_uuid;
|
|
|
|
/*
|
|
* Initialize realtime fields in the mount structure
|
|
*/
|
|
error = xfs_rtmount_init(mp);
|
|
if (error) {
|
|
xfs_warn(mp, "RT mount failed");
|
|
goto out_remove_uuid;
|
|
}
|
|
|
|
/*
|
|
* Copies the low order bits of the timestamp and the randomly
|
|
* set "sequence" number out of a UUID.
|
|
*/
|
|
uuid_getnodeuniq(&sbp->sb_uuid, mp->m_fixedfsid);
|
|
|
|
mp->m_dmevmask = 0; /* not persistent; set after each mount */
|
|
|
|
error = xfs_da_mount(mp);
|
|
if (error) {
|
|
xfs_warn(mp, "Failed dir/attr init: %d", error);
|
|
goto out_remove_uuid;
|
|
}
|
|
|
|
/*
|
|
* Initialize the precomputed transaction reservations values.
|
|
*/
|
|
xfs_trans_init(mp);
|
|
|
|
/*
|
|
* Allocate and initialize the per-ag data.
|
|
*/
|
|
spin_lock_init(&mp->m_perag_lock);
|
|
INIT_RADIX_TREE(&mp->m_perag_tree, GFP_ATOMIC);
|
|
error = xfs_initialize_perag(mp, sbp->sb_agcount, &mp->m_maxagi);
|
|
if (error) {
|
|
xfs_warn(mp, "Failed per-ag init: %d", error);
|
|
goto out_free_dir;
|
|
}
|
|
|
|
if (!sbp->sb_logblocks) {
|
|
xfs_warn(mp, "no log defined");
|
|
XFS_ERROR_REPORT("xfs_mountfs", XFS_ERRLEVEL_LOW, mp);
|
|
error = -EFSCORRUPTED;
|
|
goto out_free_perag;
|
|
}
|
|
|
|
/*
|
|
* log's mount-time initialization. Perform 1st part recovery if needed
|
|
*/
|
|
error = xfs_log_mount(mp, mp->m_logdev_targp,
|
|
XFS_FSB_TO_DADDR(mp, sbp->sb_logstart),
|
|
XFS_FSB_TO_BB(mp, sbp->sb_logblocks));
|
|
if (error) {
|
|
xfs_warn(mp, "log mount failed");
|
|
goto out_fail_wait;
|
|
}
|
|
|
|
/*
|
|
* Now the log is mounted, we know if it was an unclean shutdown or
|
|
* not. If it was, with the first phase of recovery has completed, we
|
|
* have consistent AG blocks on disk. We have not recovered EFIs yet,
|
|
* but they are recovered transactionally in the second recovery phase
|
|
* later.
|
|
*
|
|
* Hence we can safely re-initialise incore superblock counters from
|
|
* the per-ag data. These may not be correct if the filesystem was not
|
|
* cleanly unmounted, so we need to wait for recovery to finish before
|
|
* doing this.
|
|
*
|
|
* If the filesystem was cleanly unmounted, then we can trust the
|
|
* values in the superblock to be correct and we don't need to do
|
|
* anything here.
|
|
*
|
|
* If we are currently making the filesystem, the initialisation will
|
|
* fail as the perag data is in an undefined state.
|
|
*/
|
|
if (xfs_sb_version_haslazysbcount(&mp->m_sb) &&
|
|
!XFS_LAST_UNMOUNT_WAS_CLEAN(mp) &&
|
|
!mp->m_sb.sb_inprogress) {
|
|
error = xfs_initialize_perag_data(mp, sbp->sb_agcount);
|
|
if (error)
|
|
goto out_log_dealloc;
|
|
}
|
|
|
|
/*
|
|
* Get and sanity-check the root inode.
|
|
* Save the pointer to it in the mount structure.
|
|
*/
|
|
error = xfs_iget(mp, NULL, sbp->sb_rootino, 0, XFS_ILOCK_EXCL, &rip);
|
|
if (error) {
|
|
xfs_warn(mp, "failed to read root inode");
|
|
goto out_log_dealloc;
|
|
}
|
|
|
|
ASSERT(rip != NULL);
|
|
|
|
if (unlikely(!S_ISDIR(rip->i_d.di_mode))) {
|
|
xfs_warn(mp, "corrupted root inode %llu: not a directory",
|
|
(unsigned long long)rip->i_ino);
|
|
xfs_iunlock(rip, XFS_ILOCK_EXCL);
|
|
XFS_ERROR_REPORT("xfs_mountfs_int(2)", XFS_ERRLEVEL_LOW,
|
|
mp);
|
|
error = -EFSCORRUPTED;
|
|
goto out_rele_rip;
|
|
}
|
|
mp->m_rootip = rip; /* save it */
|
|
|
|
xfs_iunlock(rip, XFS_ILOCK_EXCL);
|
|
|
|
/*
|
|
* Initialize realtime inode pointers in the mount structure
|
|
*/
|
|
error = xfs_rtmount_inodes(mp);
|
|
if (error) {
|
|
/*
|
|
* Free up the root inode.
|
|
*/
|
|
xfs_warn(mp, "failed to read RT inodes");
|
|
goto out_rele_rip;
|
|
}
|
|
|
|
/*
|
|
* If this is a read-only mount defer the superblock updates until
|
|
* the next remount into writeable mode. Otherwise we would never
|
|
* perform the update e.g. for the root filesystem.
|
|
*/
|
|
if (mp->m_update_sb && !(mp->m_flags & XFS_MOUNT_RDONLY)) {
|
|
error = xfs_sync_sb(mp, false);
|
|
if (error) {
|
|
xfs_warn(mp, "failed to write sb changes");
|
|
goto out_rtunmount;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Initialise the XFS quota management subsystem for this mount
|
|
*/
|
|
if (XFS_IS_QUOTA_RUNNING(mp)) {
|
|
error = xfs_qm_newmount(mp, "amount, "aflags);
|
|
if (error)
|
|
goto out_rtunmount;
|
|
} else {
|
|
ASSERT(!XFS_IS_QUOTA_ON(mp));
|
|
|
|
/*
|
|
* If a file system had quotas running earlier, but decided to
|
|
* mount without -o uquota/pquota/gquota options, revoke the
|
|
* quotachecked license.
|
|
*/
|
|
if (mp->m_sb.sb_qflags & XFS_ALL_QUOTA_ACCT) {
|
|
xfs_notice(mp, "resetting quota flags");
|
|
error = xfs_mount_reset_sbqflags(mp);
|
|
if (error)
|
|
goto out_rtunmount;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Finish recovering the file system. This part needed to be
|
|
* delayed until after the root and real-time bitmap inodes
|
|
* were consistently read in.
|
|
*/
|
|
error = xfs_log_mount_finish(mp);
|
|
if (error) {
|
|
xfs_warn(mp, "log mount finish failed");
|
|
goto out_rtunmount;
|
|
}
|
|
|
|
/*
|
|
* Complete the quota initialisation, post-log-replay component.
|
|
*/
|
|
if (quotamount) {
|
|
ASSERT(mp->m_qflags == 0);
|
|
mp->m_qflags = quotaflags;
|
|
|
|
xfs_qm_mount_quotas(mp);
|
|
}
|
|
|
|
/*
|
|
* Now we are mounted, reserve a small amount of unused space for
|
|
* privileged transactions. This is needed so that transaction
|
|
* space required for critical operations can dip into this pool
|
|
* when at ENOSPC. This is needed for operations like create with
|
|
* attr, unwritten extent conversion at ENOSPC, etc. Data allocations
|
|
* are not allowed to use this reserved space.
|
|
*
|
|
* This may drive us straight to ENOSPC on mount, but that implies
|
|
* we were already there on the last unmount. Warn if this occurs.
|
|
*/
|
|
if (!(mp->m_flags & XFS_MOUNT_RDONLY)) {
|
|
resblks = xfs_default_resblks(mp);
|
|
error = xfs_reserve_blocks(mp, &resblks, NULL);
|
|
if (error)
|
|
xfs_warn(mp,
|
|
"Unable to allocate reserve blocks. Continuing without reserve pool.");
|
|
}
|
|
|
|
return 0;
|
|
|
|
out_rtunmount:
|
|
xfs_rtunmount_inodes(mp);
|
|
out_rele_rip:
|
|
IRELE(rip);
|
|
out_log_dealloc:
|
|
xfs_log_unmount(mp);
|
|
out_fail_wait:
|
|
if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp)
|
|
xfs_wait_buftarg(mp->m_logdev_targp);
|
|
xfs_wait_buftarg(mp->m_ddev_targp);
|
|
out_free_perag:
|
|
xfs_free_perag(mp);
|
|
out_free_dir:
|
|
xfs_da_unmount(mp);
|
|
out_remove_uuid:
|
|
xfs_uuid_unmount(mp);
|
|
out_remove_sysfs:
|
|
xfs_sysfs_del(&mp->m_kobj);
|
|
out:
|
|
return error;
|
|
}
|
|
|
|
/*
|
|
* This flushes out the inodes,dquots and the superblock, unmounts the
|
|
* log and makes sure that incore structures are freed.
|
|
*/
|
|
void
|
|
xfs_unmountfs(
|
|
struct xfs_mount *mp)
|
|
{
|
|
__uint64_t resblks;
|
|
int error;
|
|
|
|
cancel_delayed_work_sync(&mp->m_eofblocks_work);
|
|
|
|
xfs_qm_unmount_quotas(mp);
|
|
xfs_rtunmount_inodes(mp);
|
|
IRELE(mp->m_rootip);
|
|
|
|
/*
|
|
* We can potentially deadlock here if we have an inode cluster
|
|
* that has been freed has its buffer still pinned in memory because
|
|
* the transaction is still sitting in a iclog. The stale inodes
|
|
* on that buffer will have their flush locks held until the
|
|
* transaction hits the disk and the callbacks run. the inode
|
|
* flush takes the flush lock unconditionally and with nothing to
|
|
* push out the iclog we will never get that unlocked. hence we
|
|
* need to force the log first.
|
|
*/
|
|
xfs_log_force(mp, XFS_LOG_SYNC);
|
|
|
|
/*
|
|
* Flush all pending changes from the AIL.
|
|
*/
|
|
xfs_ail_push_all_sync(mp->m_ail);
|
|
|
|
/*
|
|
* And reclaim all inodes. At this point there should be no dirty
|
|
* inodes and none should be pinned or locked, but use synchronous
|
|
* reclaim just to be sure. We can stop background inode reclaim
|
|
* here as well if it is still running.
|
|
*/
|
|
cancel_delayed_work_sync(&mp->m_reclaim_work);
|
|
xfs_reclaim_inodes(mp, SYNC_WAIT);
|
|
|
|
xfs_qm_unmount(mp);
|
|
|
|
/*
|
|
* Unreserve any blocks we have so that when we unmount we don't account
|
|
* the reserved free space as used. This is really only necessary for
|
|
* lazy superblock counting because it trusts the incore superblock
|
|
* counters to be absolutely correct on clean unmount.
|
|
*
|
|
* We don't bother correcting this elsewhere for lazy superblock
|
|
* counting because on mount of an unclean filesystem we reconstruct the
|
|
* correct counter value and this is irrelevant.
|
|
*
|
|
* For non-lazy counter filesystems, this doesn't matter at all because
|
|
* we only every apply deltas to the superblock and hence the incore
|
|
* value does not matter....
|
|
*/
|
|
resblks = 0;
|
|
error = xfs_reserve_blocks(mp, &resblks, NULL);
|
|
if (error)
|
|
xfs_warn(mp, "Unable to free reserved block pool. "
|
|
"Freespace may not be correct on next mount.");
|
|
|
|
error = xfs_log_sbcount(mp);
|
|
if (error)
|
|
xfs_warn(mp, "Unable to update superblock counters. "
|
|
"Freespace may not be correct on next mount.");
|
|
|
|
xfs_log_unmount(mp);
|
|
xfs_da_unmount(mp);
|
|
xfs_uuid_unmount(mp);
|
|
|
|
#if defined(DEBUG)
|
|
xfs_errortag_clearall(mp, 0);
|
|
#endif
|
|
xfs_free_perag(mp);
|
|
|
|
xfs_sysfs_del(&mp->m_kobj);
|
|
}
|
|
|
|
/*
|
|
* Determine whether modifications can proceed. The caller specifies the minimum
|
|
* freeze level for which modifications should not be allowed. This allows
|
|
* certain operations to proceed while the freeze sequence is in progress, if
|
|
* necessary.
|
|
*/
|
|
bool
|
|
xfs_fs_writable(
|
|
struct xfs_mount *mp,
|
|
int level)
|
|
{
|
|
ASSERT(level > SB_UNFROZEN);
|
|
if ((mp->m_super->s_writers.frozen >= level) ||
|
|
XFS_FORCED_SHUTDOWN(mp) || (mp->m_flags & XFS_MOUNT_RDONLY))
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
/*
|
|
* xfs_log_sbcount
|
|
*
|
|
* Sync the superblock counters to disk.
|
|
*
|
|
* Note this code can be called during the process of freezing, so we use the
|
|
* transaction allocator that does not block when the transaction subsystem is
|
|
* in its frozen state.
|
|
*/
|
|
int
|
|
xfs_log_sbcount(xfs_mount_t *mp)
|
|
{
|
|
/* allow this to proceed during the freeze sequence... */
|
|
if (!xfs_fs_writable(mp, SB_FREEZE_COMPLETE))
|
|
return 0;
|
|
|
|
xfs_icsb_sync_counters(mp, 0);
|
|
|
|
/*
|
|
* we don't need to do this if we are updating the superblock
|
|
* counters on every modification.
|
|
*/
|
|
if (!xfs_sb_version_haslazysbcount(&mp->m_sb))
|
|
return 0;
|
|
|
|
return xfs_sync_sb(mp, true);
|
|
}
|
|
|
|
int
|
|
xfs_mod_icount(
|
|
struct xfs_mount *mp,
|
|
int64_t delta)
|
|
{
|
|
/* deltas are +/-64, hence the large batch size of 128. */
|
|
__percpu_counter_add(&mp->m_icount, delta, 128);
|
|
if (percpu_counter_compare(&mp->m_icount, 0) < 0) {
|
|
ASSERT(0);
|
|
percpu_counter_add(&mp->m_icount, -delta);
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
xfs_mod_ifree(
|
|
struct xfs_mount *mp,
|
|
int64_t delta)
|
|
{
|
|
percpu_counter_add(&mp->m_ifree, delta);
|
|
if (percpu_counter_compare(&mp->m_ifree, 0) < 0) {
|
|
ASSERT(0);
|
|
percpu_counter_add(&mp->m_ifree, -delta);
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
xfs_mod_fdblocks(
|
|
struct xfs_mount *mp,
|
|
int64_t delta,
|
|
bool rsvd)
|
|
{
|
|
int64_t lcounter;
|
|
long long res_used;
|
|
s32 batch;
|
|
|
|
if (delta > 0) {
|
|
/*
|
|
* If the reserve pool is depleted, put blocks back into it
|
|
* first. Most of the time the pool is full.
|
|
*/
|
|
if (likely(mp->m_resblks == mp->m_resblks_avail)) {
|
|
percpu_counter_add(&mp->m_fdblocks, delta);
|
|
return 0;
|
|
}
|
|
|
|
spin_lock(&mp->m_sb_lock);
|
|
res_used = (long long)(mp->m_resblks - mp->m_resblks_avail);
|
|
|
|
if (res_used > delta) {
|
|
mp->m_resblks_avail += delta;
|
|
} else {
|
|
delta -= res_used;
|
|
mp->m_resblks_avail = mp->m_resblks;
|
|
percpu_counter_add(&mp->m_fdblocks, delta);
|
|
}
|
|
spin_unlock(&mp->m_sb_lock);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Taking blocks away, need to be more accurate the closer we
|
|
* are to zero.
|
|
*
|
|
* batch size is set to a maximum of 1024 blocks - if we are
|
|
* allocating of freeing extents larger than this then we aren't
|
|
* going to be hammering the counter lock so a lock per update
|
|
* is not a problem.
|
|
*
|
|
* If the counter has a value of less than 2 * max batch size,
|
|
* then make everything serialise as we are real close to
|
|
* ENOSPC.
|
|
*/
|
|
#define __BATCH 1024
|
|
if (percpu_counter_compare(&mp->m_fdblocks, 2 * __BATCH) < 0)
|
|
batch = 1;
|
|
else
|
|
batch = __BATCH;
|
|
#undef __BATCH
|
|
|
|
__percpu_counter_add(&mp->m_fdblocks, delta, batch);
|
|
if (percpu_counter_compare(&mp->m_fdblocks,
|
|
XFS_ALLOC_SET_ASIDE(mp)) >= 0) {
|
|
/* we had space! */
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* lock up the sb for dipping into reserves before releasing the space
|
|
* that took us to ENOSPC.
|
|
*/
|
|
spin_lock(&mp->m_sb_lock);
|
|
percpu_counter_add(&mp->m_fdblocks, -delta);
|
|
if (!rsvd)
|
|
goto fdblocks_enospc;
|
|
|
|
lcounter = (long long)mp->m_resblks_avail + delta;
|
|
if (lcounter >= 0) {
|
|
mp->m_resblks_avail = lcounter;
|
|
spin_unlock(&mp->m_sb_lock);
|
|
return 0;
|
|
}
|
|
printk_once(KERN_WARNING
|
|
"Filesystem \"%s\": reserve blocks depleted! "
|
|
"Consider increasing reserve pool size.",
|
|
mp->m_fsname);
|
|
fdblocks_enospc:
|
|
spin_unlock(&mp->m_sb_lock);
|
|
return -ENOSPC;
|
|
}
|
|
|
|
/*
|
|
* xfs_mod_incore_sb_unlocked() is a utility routine commonly used to apply
|
|
* a delta to a specified field in the in-core superblock. Simply
|
|
* switch on the field indicated and apply the delta to that field.
|
|
* Fields are not allowed to dip below zero, so if the delta would
|
|
* do this do not apply it and return EINVAL.
|
|
*
|
|
* The m_sb_lock must be held when this routine is called.
|
|
*/
|
|
STATIC int
|
|
xfs_mod_incore_sb_unlocked(
|
|
xfs_mount_t *mp,
|
|
xfs_sb_field_t field,
|
|
int64_t delta,
|
|
int rsvd)
|
|
{
|
|
int scounter; /* short counter for 32 bit fields */
|
|
long long lcounter; /* long counter for 64 bit fields */
|
|
|
|
/*
|
|
* With the in-core superblock spin lock held, switch
|
|
* on the indicated field. Apply the delta to the
|
|
* proper field. If the fields value would dip below
|
|
* 0, then do not apply the delta and return EINVAL.
|
|
*/
|
|
switch (field) {
|
|
case XFS_SBS_ICOUNT:
|
|
case XFS_SBS_IFREE:
|
|
case XFS_SBS_FDBLOCKS:
|
|
ASSERT(0);
|
|
return -EINVAL;
|
|
case XFS_SBS_FREXTENTS:
|
|
lcounter = (long long)mp->m_sb.sb_frextents;
|
|
lcounter += delta;
|
|
if (lcounter < 0) {
|
|
return -ENOSPC;
|
|
}
|
|
mp->m_sb.sb_frextents = lcounter;
|
|
return 0;
|
|
case XFS_SBS_DBLOCKS:
|
|
lcounter = (long long)mp->m_sb.sb_dblocks;
|
|
lcounter += delta;
|
|
if (lcounter < 0) {
|
|
ASSERT(0);
|
|
return -EINVAL;
|
|
}
|
|
mp->m_sb.sb_dblocks = lcounter;
|
|
return 0;
|
|
case XFS_SBS_AGCOUNT:
|
|
scounter = mp->m_sb.sb_agcount;
|
|
scounter += delta;
|
|
if (scounter < 0) {
|
|
ASSERT(0);
|
|
return -EINVAL;
|
|
}
|
|
mp->m_sb.sb_agcount = scounter;
|
|
return 0;
|
|
case XFS_SBS_IMAX_PCT:
|
|
scounter = mp->m_sb.sb_imax_pct;
|
|
scounter += delta;
|
|
if (scounter < 0) {
|
|
ASSERT(0);
|
|
return -EINVAL;
|
|
}
|
|
mp->m_sb.sb_imax_pct = scounter;
|
|
return 0;
|
|
case XFS_SBS_REXTSIZE:
|
|
scounter = mp->m_sb.sb_rextsize;
|
|
scounter += delta;
|
|
if (scounter < 0) {
|
|
ASSERT(0);
|
|
return -EINVAL;
|
|
}
|
|
mp->m_sb.sb_rextsize = scounter;
|
|
return 0;
|
|
case XFS_SBS_RBMBLOCKS:
|
|
scounter = mp->m_sb.sb_rbmblocks;
|
|
scounter += delta;
|
|
if (scounter < 0) {
|
|
ASSERT(0);
|
|
return -EINVAL;
|
|
}
|
|
mp->m_sb.sb_rbmblocks = scounter;
|
|
return 0;
|
|
case XFS_SBS_RBLOCKS:
|
|
lcounter = (long long)mp->m_sb.sb_rblocks;
|
|
lcounter += delta;
|
|
if (lcounter < 0) {
|
|
ASSERT(0);
|
|
return -EINVAL;
|
|
}
|
|
mp->m_sb.sb_rblocks = lcounter;
|
|
return 0;
|
|
case XFS_SBS_REXTENTS:
|
|
lcounter = (long long)mp->m_sb.sb_rextents;
|
|
lcounter += delta;
|
|
if (lcounter < 0) {
|
|
ASSERT(0);
|
|
return -EINVAL;
|
|
}
|
|
mp->m_sb.sb_rextents = lcounter;
|
|
return 0;
|
|
case XFS_SBS_REXTSLOG:
|
|
scounter = mp->m_sb.sb_rextslog;
|
|
scounter += delta;
|
|
if (scounter < 0) {
|
|
ASSERT(0);
|
|
return -EINVAL;
|
|
}
|
|
mp->m_sb.sb_rextslog = scounter;
|
|
return 0;
|
|
default:
|
|
ASSERT(0);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* xfs_mod_incore_sb() is used to change a field in the in-core
|
|
* superblock structure by the specified delta. This modification
|
|
* is protected by the m_sb_lock. Just use the xfs_mod_incore_sb_unlocked()
|
|
* routine to do the work.
|
|
*/
|
|
int
|
|
xfs_mod_incore_sb(
|
|
struct xfs_mount *mp,
|
|
xfs_sb_field_t field,
|
|
int64_t delta,
|
|
int rsvd)
|
|
{
|
|
int status;
|
|
|
|
#ifdef HAVE_PERCPU_SB
|
|
ASSERT(field < XFS_SBS_IFREE || field > XFS_SBS_FDBLOCKS);
|
|
#endif
|
|
|
|
spin_lock(&mp->m_sb_lock);
|
|
status = xfs_mod_incore_sb_unlocked(mp, field, delta, rsvd);
|
|
spin_unlock(&mp->m_sb_lock);
|
|
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* Change more than one field in the in-core superblock structure at a time.
|
|
*
|
|
* The fields and changes to those fields are specified in the array of
|
|
* xfs_mod_sb structures passed in. Either all of the specified deltas
|
|
* will be applied or none of them will. If any modified field dips below 0,
|
|
* then all modifications will be backed out and EINVAL will be returned.
|
|
*
|
|
* Note that this function may not be used for the superblock values that
|
|
* are tracked with the in-memory per-cpu counters - a direct call to
|
|
* xfs_mod_incore_sb is required for these.
|
|
*/
|
|
int
|
|
xfs_mod_incore_sb_batch(
|
|
struct xfs_mount *mp,
|
|
xfs_mod_sb_t *msb,
|
|
uint nmsb,
|
|
int rsvd)
|
|
{
|
|
xfs_mod_sb_t *msbp;
|
|
int error = 0;
|
|
|
|
/*
|
|
* Loop through the array of mod structures and apply each individually.
|
|
* If any fail, then back out all those which have already been applied.
|
|
* Do all of this within the scope of the m_sb_lock so that all of the
|
|
* changes will be atomic.
|
|
*/
|
|
spin_lock(&mp->m_sb_lock);
|
|
for (msbp = msb; msbp < (msb + nmsb); msbp++) {
|
|
ASSERT(msbp->msb_field < XFS_SBS_ICOUNT ||
|
|
msbp->msb_field > XFS_SBS_FDBLOCKS);
|
|
|
|
error = xfs_mod_incore_sb_unlocked(mp, msbp->msb_field,
|
|
msbp->msb_delta, rsvd);
|
|
if (error)
|
|
goto unwind;
|
|
}
|
|
spin_unlock(&mp->m_sb_lock);
|
|
return 0;
|
|
|
|
unwind:
|
|
while (--msbp >= msb) {
|
|
error = xfs_mod_incore_sb_unlocked(mp, msbp->msb_field,
|
|
-msbp->msb_delta, rsvd);
|
|
ASSERT(error == 0);
|
|
}
|
|
spin_unlock(&mp->m_sb_lock);
|
|
return error;
|
|
}
|
|
|
|
/*
|
|
* xfs_getsb() is called to obtain the buffer for the superblock.
|
|
* The buffer is returned locked and read in from disk.
|
|
* The buffer should be released with a call to xfs_brelse().
|
|
*
|
|
* If the flags parameter is BUF_TRYLOCK, then we'll only return
|
|
* the superblock buffer if it can be locked without sleeping.
|
|
* If it can't then we'll return NULL.
|
|
*/
|
|
struct xfs_buf *
|
|
xfs_getsb(
|
|
struct xfs_mount *mp,
|
|
int flags)
|
|
{
|
|
struct xfs_buf *bp = mp->m_sb_bp;
|
|
|
|
if (!xfs_buf_trylock(bp)) {
|
|
if (flags & XBF_TRYLOCK)
|
|
return NULL;
|
|
xfs_buf_lock(bp);
|
|
}
|
|
|
|
xfs_buf_hold(bp);
|
|
ASSERT(XFS_BUF_ISDONE(bp));
|
|
return bp;
|
|
}
|
|
|
|
/*
|
|
* Used to free the superblock along various error paths.
|
|
*/
|
|
void
|
|
xfs_freesb(
|
|
struct xfs_mount *mp)
|
|
{
|
|
struct xfs_buf *bp = mp->m_sb_bp;
|
|
|
|
xfs_buf_lock(bp);
|
|
mp->m_sb_bp = NULL;
|
|
xfs_buf_relse(bp);
|
|
}
|
|
|
|
/*
|
|
* If the underlying (data/log/rt) device is readonly, there are some
|
|
* operations that cannot proceed.
|
|
*/
|
|
int
|
|
xfs_dev_is_read_only(
|
|
struct xfs_mount *mp,
|
|
char *message)
|
|
{
|
|
if (xfs_readonly_buftarg(mp->m_ddev_targp) ||
|
|
xfs_readonly_buftarg(mp->m_logdev_targp) ||
|
|
(mp->m_rtdev_targp && xfs_readonly_buftarg(mp->m_rtdev_targp))) {
|
|
xfs_notice(mp, "%s required on read-only device.", message);
|
|
xfs_notice(mp, "write access unavailable, cannot proceed.");
|
|
return -EROFS;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#ifdef HAVE_PERCPU_SB
|
|
/*
|
|
* Per-cpu incore superblock counters
|
|
*
|
|
* Simple concept, difficult implementation
|
|
*
|
|
* Basically, replace the incore superblock counters with a distributed per cpu
|
|
* counter for contended fields (e.g. free block count).
|
|
*
|
|
* Difficulties arise in that the incore sb is used for ENOSPC checking, and
|
|
* hence needs to be accurately read when we are running low on space. Hence
|
|
* there is a method to enable and disable the per-cpu counters based on how
|
|
* much "stuff" is available in them.
|
|
*
|
|
* Basically, a counter is enabled if there is enough free resource to justify
|
|
* running a per-cpu fast-path. If the per-cpu counter runs out (i.e. a local
|
|
* ENOSPC), then we disable the counters to synchronise all callers and
|
|
* re-distribute the available resources.
|
|
*
|
|
* If, once we redistributed the available resources, we still get a failure,
|
|
* we disable the per-cpu counter and go through the slow path.
|
|
*
|
|
* The slow path is the current xfs_mod_incore_sb() function. This means that
|
|
* when we disable a per-cpu counter, we need to drain its resources back to
|
|
* the global superblock. We do this after disabling the counter to prevent
|
|
* more threads from queueing up on the counter.
|
|
*
|
|
* Essentially, this means that we still need a lock in the fast path to enable
|
|
* synchronisation between the global counters and the per-cpu counters. This
|
|
* is not a problem because the lock will be local to a CPU almost all the time
|
|
* and have little contention except when we get to ENOSPC conditions.
|
|
*
|
|
* Basically, this lock becomes a barrier that enables us to lock out the fast
|
|
* path while we do things like enabling and disabling counters and
|
|
* synchronising the counters.
|
|
*
|
|
* Locking rules:
|
|
*
|
|
* 1. m_sb_lock before picking up per-cpu locks
|
|
* 2. per-cpu locks always picked up via for_each_online_cpu() order
|
|
* 3. accurate counter sync requires m_sb_lock + per cpu locks
|
|
* 4. modifying per-cpu counters requires holding per-cpu lock
|
|
* 5. modifying global counters requires holding m_sb_lock
|
|
* 6. enabling or disabling a counter requires holding the m_sb_lock
|
|
* and _none_ of the per-cpu locks.
|
|
*
|
|
* Disabled counters are only ever re-enabled by a balance operation
|
|
* that results in more free resources per CPU than a given threshold.
|
|
* To ensure counters don't remain disabled, they are rebalanced when
|
|
* the global resource goes above a higher threshold (i.e. some hysteresis
|
|
* is present to prevent thrashing).
|
|
*/
|
|
|
|
#ifdef CONFIG_HOTPLUG_CPU
|
|
/*
|
|
* hot-plug CPU notifier support.
|
|
*
|
|
* We need a notifier per filesystem as we need to be able to identify
|
|
* the filesystem to balance the counters out. This is achieved by
|
|
* having a notifier block embedded in the xfs_mount_t and doing pointer
|
|
* magic to get the mount pointer from the notifier block address.
|
|
*/
|
|
STATIC int
|
|
xfs_icsb_cpu_notify(
|
|
struct notifier_block *nfb,
|
|
unsigned long action,
|
|
void *hcpu)
|
|
{
|
|
xfs_icsb_cnts_t *cntp;
|
|
xfs_mount_t *mp;
|
|
|
|
mp = (xfs_mount_t *)container_of(nfb, xfs_mount_t, m_icsb_notifier);
|
|
cntp = (xfs_icsb_cnts_t *)
|
|
per_cpu_ptr(mp->m_sb_cnts, (unsigned long)hcpu);
|
|
switch (action) {
|
|
case CPU_UP_PREPARE:
|
|
case CPU_UP_PREPARE_FROZEN:
|
|
/* Easy Case - initialize the area and locks, and
|
|
* then rebalance when online does everything else for us. */
|
|
memset(cntp, 0, sizeof(xfs_icsb_cnts_t));
|
|
break;
|
|
case CPU_ONLINE:
|
|
case CPU_ONLINE_FROZEN:
|
|
xfs_icsb_lock(mp);
|
|
xfs_icsb_unlock(mp);
|
|
break;
|
|
case CPU_DEAD:
|
|
case CPU_DEAD_FROZEN:
|
|
/* Disable all the counters, then fold the dead cpu's
|
|
* count into the total on the global superblock and
|
|
* re-enable the counters. */
|
|
xfs_icsb_lock(mp);
|
|
spin_lock(&mp->m_sb_lock);
|
|
|
|
memset(cntp, 0, sizeof(xfs_icsb_cnts_t));
|
|
|
|
spin_unlock(&mp->m_sb_lock);
|
|
xfs_icsb_unlock(mp);
|
|
break;
|
|
}
|
|
|
|
return NOTIFY_OK;
|
|
}
|
|
#endif /* CONFIG_HOTPLUG_CPU */
|
|
|
|
int
|
|
xfs_icsb_init_counters(
|
|
xfs_mount_t *mp)
|
|
{
|
|
xfs_icsb_cnts_t *cntp;
|
|
int error;
|
|
int i;
|
|
|
|
error = percpu_counter_init(&mp->m_icount, 0, GFP_KERNEL);
|
|
if (error)
|
|
return error;
|
|
|
|
error = percpu_counter_init(&mp->m_ifree, 0, GFP_KERNEL);
|
|
if (error)
|
|
goto free_icount;
|
|
|
|
error = percpu_counter_init(&mp->m_fdblocks, 0, GFP_KERNEL);
|
|
if (error)
|
|
goto free_ifree;
|
|
|
|
mp->m_sb_cnts = alloc_percpu(xfs_icsb_cnts_t);
|
|
if (!mp->m_sb_cnts) {
|
|
error = -ENOMEM;
|
|
goto free_fdblocks;
|
|
}
|
|
|
|
for_each_online_cpu(i) {
|
|
cntp = (xfs_icsb_cnts_t *)per_cpu_ptr(mp->m_sb_cnts, i);
|
|
memset(cntp, 0, sizeof(xfs_icsb_cnts_t));
|
|
}
|
|
|
|
mutex_init(&mp->m_icsb_mutex);
|
|
|
|
/*
|
|
* start with all counters disabled so that the
|
|
* initial balance kicks us off correctly
|
|
*/
|
|
mp->m_icsb_counters = -1;
|
|
|
|
#ifdef CONFIG_HOTPLUG_CPU
|
|
mp->m_icsb_notifier.notifier_call = xfs_icsb_cpu_notify;
|
|
mp->m_icsb_notifier.priority = 0;
|
|
register_hotcpu_notifier(&mp->m_icsb_notifier);
|
|
#endif /* CONFIG_HOTPLUG_CPU */
|
|
|
|
return 0;
|
|
|
|
free_fdblocks:
|
|
percpu_counter_destroy(&mp->m_fdblocks);
|
|
free_ifree:
|
|
percpu_counter_destroy(&mp->m_ifree);
|
|
free_icount:
|
|
percpu_counter_destroy(&mp->m_icount);
|
|
return error;
|
|
}
|
|
|
|
void
|
|
xfs_icsb_reinit_counters(
|
|
xfs_mount_t *mp)
|
|
{
|
|
percpu_counter_set(&mp->m_icount, mp->m_sb.sb_icount);
|
|
percpu_counter_set(&mp->m_ifree, mp->m_sb.sb_ifree);
|
|
percpu_counter_set(&mp->m_fdblocks, mp->m_sb.sb_fdblocks);
|
|
|
|
xfs_icsb_lock(mp);
|
|
/*
|
|
* start with all counters disabled so that the
|
|
* initial balance kicks us off correctly
|
|
*/
|
|
mp->m_icsb_counters = -1;
|
|
xfs_icsb_unlock(mp);
|
|
}
|
|
|
|
void
|
|
xfs_icsb_destroy_counters(
|
|
xfs_mount_t *mp)
|
|
{
|
|
if (mp->m_sb_cnts) {
|
|
unregister_hotcpu_notifier(&mp->m_icsb_notifier);
|
|
free_percpu(mp->m_sb_cnts);
|
|
}
|
|
|
|
percpu_counter_destroy(&mp->m_icount);
|
|
percpu_counter_destroy(&mp->m_ifree);
|
|
percpu_counter_destroy(&mp->m_fdblocks);
|
|
|
|
mutex_destroy(&mp->m_icsb_mutex);
|
|
}
|
|
|
|
STATIC void
|
|
xfs_icsb_lock_cntr(
|
|
xfs_icsb_cnts_t *icsbp)
|
|
{
|
|
while (test_and_set_bit(XFS_ICSB_FLAG_LOCK, &icsbp->icsb_flags)) {
|
|
ndelay(1000);
|
|
}
|
|
}
|
|
|
|
STATIC void
|
|
xfs_icsb_unlock_cntr(
|
|
xfs_icsb_cnts_t *icsbp)
|
|
{
|
|
clear_bit(XFS_ICSB_FLAG_LOCK, &icsbp->icsb_flags);
|
|
}
|
|
|
|
|
|
STATIC void
|
|
xfs_icsb_lock_all_counters(
|
|
xfs_mount_t *mp)
|
|
{
|
|
xfs_icsb_cnts_t *cntp;
|
|
int i;
|
|
|
|
for_each_online_cpu(i) {
|
|
cntp = (xfs_icsb_cnts_t *)per_cpu_ptr(mp->m_sb_cnts, i);
|
|
xfs_icsb_lock_cntr(cntp);
|
|
}
|
|
}
|
|
|
|
STATIC void
|
|
xfs_icsb_unlock_all_counters(
|
|
xfs_mount_t *mp)
|
|
{
|
|
xfs_icsb_cnts_t *cntp;
|
|
int i;
|
|
|
|
for_each_online_cpu(i) {
|
|
cntp = (xfs_icsb_cnts_t *)per_cpu_ptr(mp->m_sb_cnts, i);
|
|
xfs_icsb_unlock_cntr(cntp);
|
|
}
|
|
}
|
|
|
|
STATIC void
|
|
xfs_icsb_count(
|
|
xfs_mount_t *mp,
|
|
xfs_icsb_cnts_t *cnt,
|
|
int flags)
|
|
{
|
|
memset(cnt, 0, sizeof(xfs_icsb_cnts_t));
|
|
|
|
if (!(flags & XFS_ICSB_LAZY_COUNT))
|
|
xfs_icsb_lock_all_counters(mp);
|
|
|
|
|
|
if (!(flags & XFS_ICSB_LAZY_COUNT))
|
|
xfs_icsb_unlock_all_counters(mp);
|
|
}
|
|
|
|
STATIC int
|
|
xfs_icsb_counter_disabled(
|
|
xfs_mount_t *mp,
|
|
xfs_sb_field_t field)
|
|
{
|
|
return test_bit(field, &mp->m_icsb_counters);
|
|
}
|
|
|
|
STATIC void
|
|
xfs_icsb_disable_counter(
|
|
xfs_mount_t *mp,
|
|
xfs_sb_field_t field)
|
|
{
|
|
xfs_icsb_cnts_t cnt;
|
|
|
|
/*
|
|
* If we are already disabled, then there is nothing to do
|
|
* here. We check before locking all the counters to avoid
|
|
* the expensive lock operation when being called in the
|
|
* slow path and the counter is already disabled. This is
|
|
* safe because the only time we set or clear this state is under
|
|
* the m_icsb_mutex.
|
|
*/
|
|
if (xfs_icsb_counter_disabled(mp, field))
|
|
return;
|
|
|
|
xfs_icsb_lock_all_counters(mp);
|
|
if (!test_and_set_bit(field, &mp->m_icsb_counters)) {
|
|
/* drain back to superblock */
|
|
|
|
xfs_icsb_count(mp, &cnt, XFS_ICSB_LAZY_COUNT);
|
|
switch(field) {
|
|
default:
|
|
BUG();
|
|
}
|
|
}
|
|
|
|
xfs_icsb_unlock_all_counters(mp);
|
|
}
|
|
|
|
STATIC void
|
|
xfs_icsb_enable_counter(
|
|
xfs_mount_t *mp,
|
|
xfs_sb_field_t field,
|
|
uint64_t count,
|
|
uint64_t resid)
|
|
{
|
|
int i;
|
|
|
|
xfs_icsb_lock_all_counters(mp);
|
|
for_each_online_cpu(i) {
|
|
switch (field) {
|
|
default:
|
|
BUG();
|
|
break;
|
|
}
|
|
resid = 0;
|
|
}
|
|
clear_bit(field, &mp->m_icsb_counters);
|
|
xfs_icsb_unlock_all_counters(mp);
|
|
}
|
|
|
|
void
|
|
xfs_icsb_sync_counters_locked(
|
|
xfs_mount_t *mp,
|
|
int flags)
|
|
{
|
|
xfs_icsb_cnts_t cnt;
|
|
|
|
xfs_icsb_count(mp, &cnt, flags);
|
|
}
|
|
|
|
/*
|
|
* Accurate update of per-cpu counters to incore superblock
|
|
*/
|
|
void
|
|
xfs_icsb_sync_counters(
|
|
xfs_mount_t *mp,
|
|
int flags)
|
|
{
|
|
spin_lock(&mp->m_sb_lock);
|
|
xfs_icsb_sync_counters_locked(mp, flags);
|
|
spin_unlock(&mp->m_sb_lock);
|
|
}
|
|
|
|
/*
|
|
* Balance and enable/disable counters as necessary.
|
|
*
|
|
* Thresholds for re-enabling counters are somewhat magic. inode counts are
|
|
* chosen to be the same number as single on disk allocation chunk per CPU, and
|
|
* free blocks is something far enough zero that we aren't going thrash when we
|
|
* get near ENOSPC. We also need to supply a minimum we require per cpu to
|
|
* prevent looping endlessly when xfs_alloc_space asks for more than will
|
|
* be distributed to a single CPU but each CPU has enough blocks to be
|
|
* reenabled.
|
|
*
|
|
* Note that we can be called when counters are already disabled.
|
|
* xfs_icsb_disable_counter() optimises the counter locking in this case to
|
|
* prevent locking every per-cpu counter needlessly.
|
|
*/
|
|
|
|
#define XFS_ICSB_INO_CNTR_REENABLE (uint64_t)64
|
|
#define XFS_ICSB_FDBLK_CNTR_REENABLE(mp) \
|
|
(uint64_t)(512 + XFS_ALLOC_SET_ASIDE(mp))
|
|
STATIC void
|
|
xfs_icsb_balance_counter_locked(
|
|
xfs_mount_t *mp,
|
|
xfs_sb_field_t field,
|
|
int min_per_cpu)
|
|
{
|
|
uint64_t count, resid;
|
|
|
|
/* disable counter and sync counter */
|
|
xfs_icsb_disable_counter(mp, field);
|
|
|
|
/* update counters - first CPU gets residual*/
|
|
switch (field) {
|
|
default:
|
|
BUG();
|
|
count = resid = 0; /* quiet, gcc */
|
|
break;
|
|
}
|
|
|
|
xfs_icsb_enable_counter(mp, field, count, resid);
|
|
}
|
|
|
|
STATIC void
|
|
xfs_icsb_balance_counter(
|
|
xfs_mount_t *mp,
|
|
xfs_sb_field_t fields,
|
|
int min_per_cpu)
|
|
{
|
|
spin_lock(&mp->m_sb_lock);
|
|
xfs_icsb_balance_counter_locked(mp, fields, min_per_cpu);
|
|
spin_unlock(&mp->m_sb_lock);
|
|
}
|
|
|
|
int
|
|
xfs_icsb_modify_counters(
|
|
xfs_mount_t *mp,
|
|
xfs_sb_field_t field,
|
|
int64_t delta,
|
|
int rsvd)
|
|
{
|
|
xfs_icsb_cnts_t *icsbp;
|
|
int ret = 0;
|
|
|
|
might_sleep();
|
|
again:
|
|
preempt_disable();
|
|
icsbp = this_cpu_ptr(mp->m_sb_cnts);
|
|
|
|
/*
|
|
* if the counter is disabled, go to slow path
|
|
*/
|
|
if (unlikely(xfs_icsb_counter_disabled(mp, field)))
|
|
goto slow_path;
|
|
xfs_icsb_lock_cntr(icsbp);
|
|
if (unlikely(xfs_icsb_counter_disabled(mp, field))) {
|
|
xfs_icsb_unlock_cntr(icsbp);
|
|
goto slow_path;
|
|
}
|
|
|
|
switch (field) {
|
|
default:
|
|
BUG();
|
|
goto balance_counter; /* be still, gcc */
|
|
}
|
|
xfs_icsb_unlock_cntr(icsbp);
|
|
preempt_enable();
|
|
return 0;
|
|
|
|
slow_path:
|
|
preempt_enable();
|
|
|
|
/*
|
|
* serialise with a mutex so we don't burn lots of cpu on
|
|
* the superblock lock. We still need to hold the superblock
|
|
* lock, however, when we modify the global structures.
|
|
*/
|
|
xfs_icsb_lock(mp);
|
|
|
|
/*
|
|
* Now running atomically.
|
|
*
|
|
* If the counter is enabled, someone has beaten us to rebalancing.
|
|
* Drop the lock and try again in the fast path....
|
|
*/
|
|
if (!(xfs_icsb_counter_disabled(mp, field))) {
|
|
xfs_icsb_unlock(mp);
|
|
goto again;
|
|
}
|
|
|
|
/*
|
|
* The counter is currently disabled. Because we are
|
|
* running atomically here, we know a rebalance cannot
|
|
* be in progress. Hence we can go straight to operating
|
|
* on the global superblock. We do not call xfs_mod_incore_sb()
|
|
* here even though we need to get the m_sb_lock. Doing so
|
|
* will cause us to re-enter this function and deadlock.
|
|
* Hence we get the m_sb_lock ourselves and then call
|
|
* xfs_mod_incore_sb_unlocked() as the unlocked path operates
|
|
* directly on the global counters.
|
|
*/
|
|
spin_lock(&mp->m_sb_lock);
|
|
ret = xfs_mod_incore_sb_unlocked(mp, field, delta, rsvd);
|
|
spin_unlock(&mp->m_sb_lock);
|
|
|
|
/*
|
|
* Now that we've modified the global superblock, we
|
|
* may be able to re-enable the distributed counters
|
|
* (e.g. lots of space just got freed). After that
|
|
* we are done.
|
|
*/
|
|
if (ret != -ENOSPC)
|
|
xfs_icsb_balance_counter(mp, field, 0);
|
|
xfs_icsb_unlock(mp);
|
|
return ret;
|
|
|
|
balance_counter:
|
|
xfs_icsb_unlock_cntr(icsbp);
|
|
preempt_enable();
|
|
|
|
/*
|
|
* We may have multiple threads here if multiple per-cpu
|
|
* counters run dry at the same time. This will mean we can
|
|
* do more balances than strictly necessary but it is not
|
|
* the common slowpath case.
|
|
*/
|
|
xfs_icsb_lock(mp);
|
|
|
|
/*
|
|
* running atomically.
|
|
*
|
|
* This will leave the counter in the correct state for future
|
|
* accesses. After the rebalance, we simply try again and our retry
|
|
* will either succeed through the fast path or slow path without
|
|
* another balance operation being required.
|
|
*/
|
|
xfs_icsb_balance_counter(mp, field, delta);
|
|
xfs_icsb_unlock(mp);
|
|
goto again;
|
|
}
|
|
|
|
#endif
|