forked from Minki/linux
90ed9c639c
The Acer Switch 10 SW5-032 _LID method is quite broken, it looks like this: Method (_LID, 0, NotSerialized) // _LID: Lid Status { If ((STAS & One)) { Local0 = One PBCG |= 0x05000000 HMCG |= 0x05000000 } Else { Local0 = Zero PBCG &= 0xF0FFFFFF HMCG &= 0xF0FFFFFF } ^^PCI0.GFX0.CLID = Local0 Return (Local0) } The problem here is the accesses to the PBCG and HMCG, these are the pinconf0 registers for the power, resp. the home button GPIO, e.g. PBCG is declared as: OperationRegion (PWBT, SystemMemory, 0xFED0E080, 0x10) Field (PWBT, DWordAcc, NoLock, Preserve) { PBCG, 32, PBV1, 32, PBSA, 32, PBV2, 32 } Where 0xFED0E000 is the base address of the GPO2 device and 0x80 is the offset for the pin used for the powerbutton. The problem here is this line in _LID: PBCG |= 0x05000000 This changes the trigger flags of the GPIO, changing when it generates interrupts. Note it does not clear the original flags. Linux uses an edge triggered interrupt on both positive and negative edges. This |= adds the BYT_TRIG_LVL flag to this, so now it is turned into a level interrupt which fires both when low and high, iow it simply always fires leading to an interrupt storm, the tablet immediately waking up from suspend again, etc. There is nothing we can do to fix this, except for a DSDT override, which the user needs to do manually. The only thing we can do is never call _LID, which requires disabling the lid-switch functionality altogether. This commit adds a quirk for this, as no lid-switch function is better then the interrupt storm. A user manually applying a DSDT override can also override the quirk on the kernel cmdline. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
665 lines
18 KiB
C
665 lines
18 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* button.c - ACPI Button Driver
|
|
*
|
|
* Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
|
|
* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
|
|
*/
|
|
|
|
#define pr_fmt(fmt) "ACPI: button: " fmt
|
|
|
|
#include <linux/compiler.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/types.h>
|
|
#include <linux/proc_fs.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/input.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/dmi.h>
|
|
#include <acpi/button.h>
|
|
|
|
#define PREFIX "ACPI: "
|
|
|
|
#define ACPI_BUTTON_CLASS "button"
|
|
#define ACPI_BUTTON_FILE_INFO "info"
|
|
#define ACPI_BUTTON_FILE_STATE "state"
|
|
#define ACPI_BUTTON_TYPE_UNKNOWN 0x00
|
|
#define ACPI_BUTTON_NOTIFY_STATUS 0x80
|
|
|
|
#define ACPI_BUTTON_SUBCLASS_POWER "power"
|
|
#define ACPI_BUTTON_HID_POWER "PNP0C0C"
|
|
#define ACPI_BUTTON_DEVICE_NAME_POWER "Power Button"
|
|
#define ACPI_BUTTON_TYPE_POWER 0x01
|
|
|
|
#define ACPI_BUTTON_SUBCLASS_SLEEP "sleep"
|
|
#define ACPI_BUTTON_HID_SLEEP "PNP0C0E"
|
|
#define ACPI_BUTTON_DEVICE_NAME_SLEEP "Sleep Button"
|
|
#define ACPI_BUTTON_TYPE_SLEEP 0x03
|
|
|
|
#define ACPI_BUTTON_SUBCLASS_LID "lid"
|
|
#define ACPI_BUTTON_HID_LID "PNP0C0D"
|
|
#define ACPI_BUTTON_DEVICE_NAME_LID "Lid Switch"
|
|
#define ACPI_BUTTON_TYPE_LID 0x05
|
|
|
|
enum {
|
|
ACPI_BUTTON_LID_INIT_IGNORE,
|
|
ACPI_BUTTON_LID_INIT_OPEN,
|
|
ACPI_BUTTON_LID_INIT_METHOD,
|
|
ACPI_BUTTON_LID_INIT_DISABLED,
|
|
};
|
|
|
|
static const char * const lid_init_state_str[] = {
|
|
[ACPI_BUTTON_LID_INIT_IGNORE] = "ignore",
|
|
[ACPI_BUTTON_LID_INIT_OPEN] = "open",
|
|
[ACPI_BUTTON_LID_INIT_METHOD] = "method",
|
|
[ACPI_BUTTON_LID_INIT_DISABLED] = "disabled",
|
|
};
|
|
|
|
#define _COMPONENT ACPI_BUTTON_COMPONENT
|
|
ACPI_MODULE_NAME("button");
|
|
|
|
MODULE_AUTHOR("Paul Diefenbaugh");
|
|
MODULE_DESCRIPTION("ACPI Button Driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static const struct acpi_device_id button_device_ids[] = {
|
|
{ACPI_BUTTON_HID_LID, 0},
|
|
{ACPI_BUTTON_HID_SLEEP, 0},
|
|
{ACPI_BUTTON_HID_SLEEPF, 0},
|
|
{ACPI_BUTTON_HID_POWER, 0},
|
|
{ACPI_BUTTON_HID_POWERF, 0},
|
|
{"", 0},
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, button_device_ids);
|
|
|
|
/* Please keep this list sorted alphabetically by vendor and model */
|
|
static const struct dmi_system_id dmi_lid_quirks[] = {
|
|
{
|
|
/*
|
|
* Acer Switch 10 SW5-012. _LID method messes with home and
|
|
* power button GPIO IRQ settings causing an interrupt storm on
|
|
* both GPIOs. This is unfixable without a DSDT override, so we
|
|
* have to disable the lid-switch functionality altogether :|
|
|
*/
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire SW5-012"),
|
|
},
|
|
.driver_data = (void *)(long)ACPI_BUTTON_LID_INIT_DISABLED,
|
|
},
|
|
{
|
|
/*
|
|
* Asus T200TA, _LID keeps reporting closed after every second
|
|
* openening of the lid. Causing immediate re-suspend after
|
|
* opening every other open. Using LID_INIT_OPEN fixes this.
|
|
*/
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "T200TA"),
|
|
},
|
|
.driver_data = (void *)(long)ACPI_BUTTON_LID_INIT_OPEN,
|
|
},
|
|
{
|
|
/* GP-electronic T701, _LID method points to a floating GPIO */
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "T701"),
|
|
DMI_MATCH(DMI_BIOS_VERSION, "BYT70A.YNCHENG.WIN.007"),
|
|
},
|
|
.driver_data = (void *)(long)ACPI_BUTTON_LID_INIT_DISABLED,
|
|
},
|
|
{
|
|
/*
|
|
* Medion Akoya E2215T, notification of the LID device only
|
|
* happens on close, not on open and _LID always returns closed.
|
|
*/
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "MEDION"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "E2215T MD60198"),
|
|
},
|
|
.driver_data = (void *)(long)ACPI_BUTTON_LID_INIT_OPEN,
|
|
},
|
|
{}
|
|
};
|
|
|
|
static int acpi_button_add(struct acpi_device *device);
|
|
static int acpi_button_remove(struct acpi_device *device);
|
|
static void acpi_button_notify(struct acpi_device *device, u32 event);
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int acpi_button_suspend(struct device *dev);
|
|
static int acpi_button_resume(struct device *dev);
|
|
#else
|
|
#define acpi_button_suspend NULL
|
|
#define acpi_button_resume NULL
|
|
#endif
|
|
static SIMPLE_DEV_PM_OPS(acpi_button_pm, acpi_button_suspend, acpi_button_resume);
|
|
|
|
static struct acpi_driver acpi_button_driver = {
|
|
.name = "button",
|
|
.class = ACPI_BUTTON_CLASS,
|
|
.ids = button_device_ids,
|
|
.ops = {
|
|
.add = acpi_button_add,
|
|
.remove = acpi_button_remove,
|
|
.notify = acpi_button_notify,
|
|
},
|
|
.drv.pm = &acpi_button_pm,
|
|
};
|
|
|
|
struct acpi_button {
|
|
unsigned int type;
|
|
struct input_dev *input;
|
|
char phys[32]; /* for input device */
|
|
unsigned long pushed;
|
|
int last_state;
|
|
ktime_t last_time;
|
|
bool suspended;
|
|
};
|
|
|
|
static struct acpi_device *lid_device;
|
|
static long lid_init_state = -1;
|
|
|
|
static unsigned long lid_report_interval __read_mostly = 500;
|
|
module_param(lid_report_interval, ulong, 0644);
|
|
MODULE_PARM_DESC(lid_report_interval, "Interval (ms) between lid key events");
|
|
|
|
/* --------------------------------------------------------------------------
|
|
FS Interface (/proc)
|
|
-------------------------------------------------------------------------- */
|
|
|
|
static struct proc_dir_entry *acpi_button_dir;
|
|
static struct proc_dir_entry *acpi_lid_dir;
|
|
|
|
static int acpi_lid_evaluate_state(struct acpi_device *device)
|
|
{
|
|
unsigned long long lid_state;
|
|
acpi_status status;
|
|
|
|
status = acpi_evaluate_integer(device->handle, "_LID", NULL, &lid_state);
|
|
if (ACPI_FAILURE(status))
|
|
return -ENODEV;
|
|
|
|
return lid_state ? 1 : 0;
|
|
}
|
|
|
|
static int acpi_lid_notify_state(struct acpi_device *device, int state)
|
|
{
|
|
struct acpi_button *button = acpi_driver_data(device);
|
|
ktime_t next_report;
|
|
bool do_update;
|
|
|
|
/*
|
|
* In lid_init_state=ignore mode, if user opens/closes lid
|
|
* frequently with "open" missing, and "last_time" is also updated
|
|
* frequently, "close" cannot be delivered to the userspace.
|
|
* So "last_time" is only updated after a timeout or an actual
|
|
* switch.
|
|
*/
|
|
if (lid_init_state != ACPI_BUTTON_LID_INIT_IGNORE ||
|
|
button->last_state != !!state)
|
|
do_update = true;
|
|
else
|
|
do_update = false;
|
|
|
|
next_report = ktime_add(button->last_time,
|
|
ms_to_ktime(lid_report_interval));
|
|
if (button->last_state == !!state &&
|
|
ktime_after(ktime_get(), next_report)) {
|
|
/* Complain the buggy firmware */
|
|
pr_warn_once("The lid device is not compliant to SW_LID.\n");
|
|
|
|
/*
|
|
* Send the unreliable complement switch event:
|
|
*
|
|
* On most platforms, the lid device is reliable. However
|
|
* there are exceptions:
|
|
* 1. Platforms returning initial lid state as "close" by
|
|
* default after booting/resuming:
|
|
* https://bugzilla.kernel.org/show_bug.cgi?id=89211
|
|
* https://bugzilla.kernel.org/show_bug.cgi?id=106151
|
|
* 2. Platforms never reporting "open" events:
|
|
* https://bugzilla.kernel.org/show_bug.cgi?id=106941
|
|
* On these buggy platforms, the usage model of the ACPI
|
|
* lid device actually is:
|
|
* 1. The initial returning value of _LID may not be
|
|
* reliable.
|
|
* 2. The open event may not be reliable.
|
|
* 3. The close event is reliable.
|
|
*
|
|
* But SW_LID is typed as input switch event, the input
|
|
* layer checks if the event is redundant. Hence if the
|
|
* state is not switched, the userspace cannot see this
|
|
* platform triggered reliable event. By inserting a
|
|
* complement switch event, it then is guaranteed that the
|
|
* platform triggered reliable one can always be seen by
|
|
* the userspace.
|
|
*/
|
|
if (lid_init_state == ACPI_BUTTON_LID_INIT_IGNORE) {
|
|
do_update = true;
|
|
/*
|
|
* Do generate complement switch event for "close"
|
|
* as "close" is reliable and wrong "open" won't
|
|
* trigger unexpected behaviors.
|
|
* Do not generate complement switch event for
|
|
* "open" as "open" is not reliable and wrong
|
|
* "close" will trigger unexpected behaviors.
|
|
*/
|
|
if (!state) {
|
|
input_report_switch(button->input,
|
|
SW_LID, state);
|
|
input_sync(button->input);
|
|
}
|
|
}
|
|
}
|
|
/* Send the platform triggered reliable event */
|
|
if (do_update) {
|
|
acpi_handle_debug(device->handle, "ACPI LID %s\n",
|
|
state ? "open" : "closed");
|
|
input_report_switch(button->input, SW_LID, !state);
|
|
input_sync(button->input);
|
|
button->last_state = !!state;
|
|
button->last_time = ktime_get();
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused acpi_button_state_seq_show(struct seq_file *seq,
|
|
void *offset)
|
|
{
|
|
struct acpi_device *device = seq->private;
|
|
int state;
|
|
|
|
state = acpi_lid_evaluate_state(device);
|
|
seq_printf(seq, "state: %s\n",
|
|
state < 0 ? "unsupported" : (state ? "open" : "closed"));
|
|
return 0;
|
|
}
|
|
|
|
static int acpi_button_add_fs(struct acpi_device *device)
|
|
{
|
|
struct acpi_button *button = acpi_driver_data(device);
|
|
struct proc_dir_entry *entry = NULL;
|
|
int ret = 0;
|
|
|
|
/* procfs I/F for ACPI lid device only */
|
|
if (button->type != ACPI_BUTTON_TYPE_LID)
|
|
return 0;
|
|
|
|
if (acpi_button_dir || acpi_lid_dir) {
|
|
printk(KERN_ERR PREFIX "More than one Lid device found!\n");
|
|
return -EEXIST;
|
|
}
|
|
|
|
/* create /proc/acpi/button */
|
|
acpi_button_dir = proc_mkdir(ACPI_BUTTON_CLASS, acpi_root_dir);
|
|
if (!acpi_button_dir)
|
|
return -ENODEV;
|
|
|
|
/* create /proc/acpi/button/lid */
|
|
acpi_lid_dir = proc_mkdir(ACPI_BUTTON_SUBCLASS_LID, acpi_button_dir);
|
|
if (!acpi_lid_dir) {
|
|
ret = -ENODEV;
|
|
goto remove_button_dir;
|
|
}
|
|
|
|
/* create /proc/acpi/button/lid/LID/ */
|
|
acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device), acpi_lid_dir);
|
|
if (!acpi_device_dir(device)) {
|
|
ret = -ENODEV;
|
|
goto remove_lid_dir;
|
|
}
|
|
|
|
/* create /proc/acpi/button/lid/LID/state */
|
|
entry = proc_create_single_data(ACPI_BUTTON_FILE_STATE, S_IRUGO,
|
|
acpi_device_dir(device), acpi_button_state_seq_show,
|
|
device);
|
|
if (!entry) {
|
|
ret = -ENODEV;
|
|
goto remove_dev_dir;
|
|
}
|
|
|
|
done:
|
|
return ret;
|
|
|
|
remove_dev_dir:
|
|
remove_proc_entry(acpi_device_bid(device),
|
|
acpi_lid_dir);
|
|
acpi_device_dir(device) = NULL;
|
|
remove_lid_dir:
|
|
remove_proc_entry(ACPI_BUTTON_SUBCLASS_LID, acpi_button_dir);
|
|
acpi_lid_dir = NULL;
|
|
remove_button_dir:
|
|
remove_proc_entry(ACPI_BUTTON_CLASS, acpi_root_dir);
|
|
acpi_button_dir = NULL;
|
|
goto done;
|
|
}
|
|
|
|
static int acpi_button_remove_fs(struct acpi_device *device)
|
|
{
|
|
struct acpi_button *button = acpi_driver_data(device);
|
|
|
|
if (button->type != ACPI_BUTTON_TYPE_LID)
|
|
return 0;
|
|
|
|
remove_proc_entry(ACPI_BUTTON_FILE_STATE,
|
|
acpi_device_dir(device));
|
|
remove_proc_entry(acpi_device_bid(device),
|
|
acpi_lid_dir);
|
|
acpi_device_dir(device) = NULL;
|
|
remove_proc_entry(ACPI_BUTTON_SUBCLASS_LID, acpi_button_dir);
|
|
acpi_lid_dir = NULL;
|
|
remove_proc_entry(ACPI_BUTTON_CLASS, acpi_root_dir);
|
|
acpi_button_dir = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* --------------------------------------------------------------------------
|
|
Driver Interface
|
|
-------------------------------------------------------------------------- */
|
|
int acpi_lid_open(void)
|
|
{
|
|
if (!lid_device)
|
|
return -ENODEV;
|
|
|
|
return acpi_lid_evaluate_state(lid_device);
|
|
}
|
|
EXPORT_SYMBOL(acpi_lid_open);
|
|
|
|
static int acpi_lid_update_state(struct acpi_device *device,
|
|
bool signal_wakeup)
|
|
{
|
|
int state;
|
|
|
|
state = acpi_lid_evaluate_state(device);
|
|
if (state < 0)
|
|
return state;
|
|
|
|
if (state && signal_wakeup)
|
|
acpi_pm_wakeup_event(&device->dev);
|
|
|
|
return acpi_lid_notify_state(device, state);
|
|
}
|
|
|
|
static void acpi_lid_initialize_state(struct acpi_device *device)
|
|
{
|
|
switch (lid_init_state) {
|
|
case ACPI_BUTTON_LID_INIT_OPEN:
|
|
(void)acpi_lid_notify_state(device, 1);
|
|
break;
|
|
case ACPI_BUTTON_LID_INIT_METHOD:
|
|
(void)acpi_lid_update_state(device, false);
|
|
break;
|
|
case ACPI_BUTTON_LID_INIT_IGNORE:
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void acpi_button_notify(struct acpi_device *device, u32 event)
|
|
{
|
|
struct acpi_button *button = acpi_driver_data(device);
|
|
struct input_dev *input;
|
|
int users;
|
|
|
|
switch (event) {
|
|
case ACPI_FIXED_HARDWARE_EVENT:
|
|
event = ACPI_BUTTON_NOTIFY_STATUS;
|
|
/* fall through */
|
|
case ACPI_BUTTON_NOTIFY_STATUS:
|
|
input = button->input;
|
|
if (button->type == ACPI_BUTTON_TYPE_LID) {
|
|
mutex_lock(&button->input->mutex);
|
|
users = button->input->users;
|
|
mutex_unlock(&button->input->mutex);
|
|
if (users)
|
|
acpi_lid_update_state(device, true);
|
|
} else {
|
|
int keycode;
|
|
|
|
acpi_pm_wakeup_event(&device->dev);
|
|
if (button->suspended)
|
|
break;
|
|
|
|
keycode = test_bit(KEY_SLEEP, input->keybit) ?
|
|
KEY_SLEEP : KEY_POWER;
|
|
input_report_key(input, keycode, 1);
|
|
input_sync(input);
|
|
input_report_key(input, keycode, 0);
|
|
input_sync(input);
|
|
|
|
acpi_bus_generate_netlink_event(
|
|
device->pnp.device_class,
|
|
dev_name(&device->dev),
|
|
event, ++button->pushed);
|
|
}
|
|
break;
|
|
default:
|
|
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
|
|
"Unsupported event [0x%x]\n", event));
|
|
break;
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int acpi_button_suspend(struct device *dev)
|
|
{
|
|
struct acpi_device *device = to_acpi_device(dev);
|
|
struct acpi_button *button = acpi_driver_data(device);
|
|
|
|
button->suspended = true;
|
|
return 0;
|
|
}
|
|
|
|
static int acpi_button_resume(struct device *dev)
|
|
{
|
|
struct acpi_device *device = to_acpi_device(dev);
|
|
struct acpi_button *button = acpi_driver_data(device);
|
|
|
|
button->suspended = false;
|
|
if (button->type == ACPI_BUTTON_TYPE_LID && button->input->users) {
|
|
button->last_state = !!acpi_lid_evaluate_state(device);
|
|
button->last_time = ktime_get();
|
|
acpi_lid_initialize_state(device);
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int acpi_lid_input_open(struct input_dev *input)
|
|
{
|
|
struct acpi_device *device = input_get_drvdata(input);
|
|
struct acpi_button *button = acpi_driver_data(device);
|
|
|
|
button->last_state = !!acpi_lid_evaluate_state(device);
|
|
button->last_time = ktime_get();
|
|
acpi_lid_initialize_state(device);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int acpi_button_add(struct acpi_device *device)
|
|
{
|
|
struct acpi_button *button;
|
|
struct input_dev *input;
|
|
const char *hid = acpi_device_hid(device);
|
|
char *name, *class;
|
|
int error;
|
|
|
|
if (!strcmp(hid, ACPI_BUTTON_HID_LID) &&
|
|
lid_init_state == ACPI_BUTTON_LID_INIT_DISABLED)
|
|
return -ENODEV;
|
|
|
|
button = kzalloc(sizeof(struct acpi_button), GFP_KERNEL);
|
|
if (!button)
|
|
return -ENOMEM;
|
|
|
|
device->driver_data = button;
|
|
|
|
button->input = input = input_allocate_device();
|
|
if (!input) {
|
|
error = -ENOMEM;
|
|
goto err_free_button;
|
|
}
|
|
|
|
name = acpi_device_name(device);
|
|
class = acpi_device_class(device);
|
|
|
|
if (!strcmp(hid, ACPI_BUTTON_HID_POWER) ||
|
|
!strcmp(hid, ACPI_BUTTON_HID_POWERF)) {
|
|
button->type = ACPI_BUTTON_TYPE_POWER;
|
|
strcpy(name, ACPI_BUTTON_DEVICE_NAME_POWER);
|
|
sprintf(class, "%s/%s",
|
|
ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_POWER);
|
|
} else if (!strcmp(hid, ACPI_BUTTON_HID_SLEEP) ||
|
|
!strcmp(hid, ACPI_BUTTON_HID_SLEEPF)) {
|
|
button->type = ACPI_BUTTON_TYPE_SLEEP;
|
|
strcpy(name, ACPI_BUTTON_DEVICE_NAME_SLEEP);
|
|
sprintf(class, "%s/%s",
|
|
ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_SLEEP);
|
|
} else if (!strcmp(hid, ACPI_BUTTON_HID_LID)) {
|
|
button->type = ACPI_BUTTON_TYPE_LID;
|
|
strcpy(name, ACPI_BUTTON_DEVICE_NAME_LID);
|
|
sprintf(class, "%s/%s",
|
|
ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_LID);
|
|
input->open = acpi_lid_input_open;
|
|
} else {
|
|
printk(KERN_ERR PREFIX "Unsupported hid [%s]\n", hid);
|
|
error = -ENODEV;
|
|
goto err_free_input;
|
|
}
|
|
|
|
error = acpi_button_add_fs(device);
|
|
if (error)
|
|
goto err_free_input;
|
|
|
|
snprintf(button->phys, sizeof(button->phys), "%s/button/input0", hid);
|
|
|
|
input->name = name;
|
|
input->phys = button->phys;
|
|
input->id.bustype = BUS_HOST;
|
|
input->id.product = button->type;
|
|
input->dev.parent = &device->dev;
|
|
|
|
switch (button->type) {
|
|
case ACPI_BUTTON_TYPE_POWER:
|
|
input_set_capability(input, EV_KEY, KEY_POWER);
|
|
break;
|
|
|
|
case ACPI_BUTTON_TYPE_SLEEP:
|
|
input_set_capability(input, EV_KEY, KEY_SLEEP);
|
|
break;
|
|
|
|
case ACPI_BUTTON_TYPE_LID:
|
|
input_set_capability(input, EV_SW, SW_LID);
|
|
break;
|
|
}
|
|
|
|
input_set_drvdata(input, device);
|
|
error = input_register_device(input);
|
|
if (error)
|
|
goto err_remove_fs;
|
|
if (button->type == ACPI_BUTTON_TYPE_LID) {
|
|
/*
|
|
* This assumes there's only one lid device, or if there are
|
|
* more we only care about the last one...
|
|
*/
|
|
lid_device = device;
|
|
}
|
|
|
|
device_init_wakeup(&device->dev, true);
|
|
printk(KERN_INFO PREFIX "%s [%s]\n", name, acpi_device_bid(device));
|
|
return 0;
|
|
|
|
err_remove_fs:
|
|
acpi_button_remove_fs(device);
|
|
err_free_input:
|
|
input_free_device(input);
|
|
err_free_button:
|
|
kfree(button);
|
|
return error;
|
|
}
|
|
|
|
static int acpi_button_remove(struct acpi_device *device)
|
|
{
|
|
struct acpi_button *button = acpi_driver_data(device);
|
|
|
|
acpi_button_remove_fs(device);
|
|
input_unregister_device(button->input);
|
|
kfree(button);
|
|
return 0;
|
|
}
|
|
|
|
static int param_set_lid_init_state(const char *val,
|
|
const struct kernel_param *kp)
|
|
{
|
|
int i;
|
|
|
|
i = sysfs_match_string(lid_init_state_str, val);
|
|
if (i < 0)
|
|
return i;
|
|
|
|
lid_init_state = i;
|
|
pr_info("Initial lid state set to '%s'\n", lid_init_state_str[i]);
|
|
return 0;
|
|
}
|
|
|
|
static int param_get_lid_init_state(char *buf, const struct kernel_param *kp)
|
|
{
|
|
int i, c = 0;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(lid_init_state_str); i++)
|
|
if (i == lid_init_state)
|
|
c += sprintf(buf + c, "[%s] ", lid_init_state_str[i]);
|
|
else
|
|
c += sprintf(buf + c, "%s ", lid_init_state_str[i]);
|
|
|
|
buf[c - 1] = '\n'; /* Replace the final space with a newline */
|
|
|
|
return c;
|
|
}
|
|
|
|
module_param_call(lid_init_state,
|
|
param_set_lid_init_state, param_get_lid_init_state,
|
|
NULL, 0644);
|
|
MODULE_PARM_DESC(lid_init_state, "Behavior for reporting LID initial state");
|
|
|
|
static int acpi_button_register_driver(struct acpi_driver *driver)
|
|
{
|
|
const struct dmi_system_id *dmi_id;
|
|
|
|
if (lid_init_state == -1) {
|
|
dmi_id = dmi_first_match(dmi_lid_quirks);
|
|
if (dmi_id)
|
|
lid_init_state = (long)dmi_id->driver_data;
|
|
else
|
|
lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
|
|
}
|
|
|
|
/*
|
|
* Modules such as nouveau.ko and i915.ko have a link time dependency
|
|
* on acpi_lid_open(), and would therefore not be loadable on ACPI
|
|
* capable kernels booted in non-ACPI mode if the return value of
|
|
* acpi_bus_register_driver() is returned from here with ACPI disabled
|
|
* when this driver is built as a module.
|
|
*/
|
|
if (acpi_disabled)
|
|
return 0;
|
|
|
|
return acpi_bus_register_driver(driver);
|
|
}
|
|
|
|
static void acpi_button_unregister_driver(struct acpi_driver *driver)
|
|
{
|
|
if (!acpi_disabled)
|
|
acpi_bus_unregister_driver(driver);
|
|
}
|
|
|
|
module_driver(acpi_button_driver, acpi_button_register_driver,
|
|
acpi_button_unregister_driver);
|