leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
0cfe8751bb
linux/arch/arm/mach-omap2
History
Benoit Cousson 0cfe8751bb OMAP4: hwmod data: Add SYSS_HAS_RESET_STATUS flag 
Update the data for GPIO, UART, WD_TIMER and I2C in order to
support the new reset status flag introduce in the following
commit:
commit 2cb068149c
OMAP: hwmod: Fix softreset status check for some new OMAP4 IPs

Without this flag properly set, the reset is done, but the hwmod
core code will not wait for the reset completion to continue its
excecution.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Tested-by: Charulatha V <charu@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Govindraj.R <govindraj.raja@ti.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21 21:08:33 -07:00
..
include/mach omap2+: Initialize omap_irq_base for entry-macro.S from platform code 2010-12-10 09:42:51 -08:00
board-2430sdp.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-3430sdp.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-3630sdp.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-4430sdp.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-am3517crane.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-am3517evm.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-apollon.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-cm-t35.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-cm-t3517.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-devkit8000.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-flash.c OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
board-flash.h OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
board-generic.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-h4.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-igep0020.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-igep0030.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-ldp.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-n8x0.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-omap3beagle.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-omap3evm.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-omap3logic.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-omap3pandora.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-omap3stalker.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-omap3touchbook.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-omap4panda.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-overo.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-rm680.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-rx51-peripherals.c omap: rx51: Switch rx51_tpa6130a2_data __initdata to__initdata_or_module 2010-12-20 18:48:16 -08:00
board-rx51-video.c Added video data to support tvout on rx51 2010-12-20 18:48:16 -08:00
board-rx51.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-zoom-debugboard.c OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
board-zoom-peripherals.c omap: kill all section mismatch warning for omap2plus_defconfig 2010-12-17 17:25:26 -08:00
board-zoom.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
clkt2xxx_apll.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
clkt2xxx_dpllcore.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
clkt2xxx_osc.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clkt2xxx_sys.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clkt2xxx_virt_prcm_set.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
clkt34xx_dpll3m2.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clkt_clksel.c OMAP2+ clock: clean up clkt_clksel.c 2010-05-20 12:31:06 -06:00
clkt_dpll.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clock2xxx.c OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code 2010-02-24 17:45:15 -07:00
clock2xxx.h OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files 2010-02-24 12:29:42 -07:00
clock3xxx_data.c OMAP3: clock: clarify usage of struct clksel_rate.flags and struct omap_clk.cpu 2010-12-21 21:08:14 -07:00
clock3xxx.c OMAP3: clock: fix incorrect rate display when switching MPU rate at boot 2010-12-21 21:08:14 -07:00
clock3xxx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock34xx.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clock34xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock36xx.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock36xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock44xx_data.c OMAP4: clock data: Export control to enable/disable CORE/PER M3 clocks 2010-12-21 21:08:14 -07:00
clock44xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock2420_data.c OMAP2xxx clock: fix dss2_fck recalc to use clksel 2010-12-21 21:08:14 -07:00
clock2430_data.c OMAP2xxx clock: fix dss2_fck recalc to use clksel 2010-12-21 21:08:14 -07:00
clock2430.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clock3517.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clock3517.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock_common_data.c OMAP3 clock: rename RATE_IN_343X, RATE_IN_3430ES2 to match reality 2010-05-20 12:31:07 -06:00
clock.c OMAP2+: clockdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:15 -07:00
clock.h OMAP2+ clock: clean up clkt_clksel.c 2010-05-20 12:31:06 -06:00
clockdomain.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
clockdomain.h OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
clockdomains2xxx_3xxx_data.c OMAP2+: clockdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:15 -07:00
clockdomains44xx_data.c OMAP2+: clockdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:15 -07:00
cm1_44xx.h OMAP4: CM instances: add clockdomain register offsets 2010-12-21 21:05:15 -07:00
cm2_44xx.h OMAP4: CM instances: add clockdomain register offsets 2010-12-21 21:05:15 -07:00
cm2xxx_3xxx.c OMAP2/3: clockdomain: remove unneeded .clkstctrl_reg, remove some direct CM register accesses 2010-12-21 21:05:15 -07:00
cm2xxx_3xxx.h OMAP2/3: clockdomain: remove unneeded .clkstctrl_reg, remove some direct CM register accesses 2010-12-21 21:05:15 -07:00
cm44xx.c OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
cm44xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
cm-regbits-24xx.h OMAP2/3: clockdomain: remove unneeded .clkstctrl_reg, remove some direct CM register accesses 2010-12-21 21:05:15 -07:00
cm-regbits-34xx.h OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support 2010-12-21 21:05:15 -07:00
cm-regbits-44xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
cm.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
cminst44xx.c OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support 2010-12-21 21:05:15 -07:00
cminst44xx.h OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support 2010-12-21 21:05:15 -07:00
common.c OMAP: control: move plat-omap/control.h to mach-omap2/control.h 2010-10-08 11:40:20 -06:00
control.c OMAP3: control/PM: move padconf save code to mach-omap2/control.c 2010-12-21 21:05:16 -07:00
control.h OMAP3: control/PM: move padconf save code to mach-omap2/control.c 2010-12-21 21:05:16 -07:00
cpuidle34xx.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
devices.c OMAP2+: wd_timer: disable on boot via hwmod postsetup mechanism 2010-12-21 19:57:40 -07:00
dma.c OMAP: DMA: Convert DMA library into platform driver 2010-12-20 18:38:31 -08:00
dpll3xxx.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
dsp.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
emu.c omap2/3: Fix initcalls for multi-omap 2010-02-15 09:27:05 -08:00
gpio.c OMAP2+: GPIO: device registration 2010-12-07 16:26:57 -08:00
gpmc-nand.c omap3 nand: cleanup virtual address usages 2010-08-02 15:30:38 +03:00
gpmc-onenand.c
gpmc-smc91x.c
gpmc-smsc911x.c ARM: OMAP3LOGIC: Add generic smsc911x support when connected to GPMC 2010-09-28 11:39:18 -07:00
gpmc.c omap3 nand: cleanup virtual address usages 2010-08-02 15:30:38 +03:00
hsmmc.c OMAP: control: move plat-omap/control.h to mach-omap2/control.h 2010-10-08 11:40:20 -06:00
hsmmc.h Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2010-10-25 13:46:56 -07:00
i2c.c omap: mux: Convert 2420 platform init code to use new mux code 2010-07-05 16:31:40 +03:00
id.c OMAP: control: move plat-omap/control.h to mach-omap2/control.h 2010-10-08 11:40:20 -06:00
io.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
io.h OMAP: plat-omap: Fix static function warnings 2010-10-08 10:12:38 -07:00
iommu2.c omap iommu: move iommu_disable at fault to the above layer 2010-06-29 07:55:07 +03:00
irq.c OMAP3: add comments for erratas i540 and i478 workarounds 2010-12-17 16:48:20 -08:00
Kconfig omap4: opp: add OPP table data 2010-12-21 14:30:40 -08:00
mailbox.c OMAP: mailbox: fix detection for previously supported chips 2010-12-02 05:43:16 -06:00
Makefile OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
Makefile.boot
mcbsp.c OMAP: McBSP: Remove null omap44xx ops comment 2010-10-08 11:40:21 -06:00
mux34xx.c OMAP: mux: Add __func__ macro to pr_xxx macros 2010-11-17 12:01:54 +01:00
mux34xx.h
mux44xx.c OMAP: mux: Add __func__ macro to pr_xxx macros 2010-11-17 12:01:54 +01:00
mux44xx.h OMAP4: mux: Add CBS package data for OMAP4430 ES2 2010-11-17 12:01:52 +01:00
mux2420.c OMAP: mux: Add __func__ macro to pr_xxx macros 2010-11-17 12:01:54 +01:00
mux2420.h omap: mux: Add data for 2420 2010-07-05 16:31:36 +03:00
mux2430.c OMAP: mux: Add __func__ macro to pr_xxx macros 2010-11-17 12:01:54 +01:00
mux2430.h omap: mux: Add data for 2430 2010-07-05 16:31:36 +03:00
mux.c OMAP: mux: Add __func__ macro to pr_xxx macros 2010-11-17 12:01:54 +01:00
mux.h arm: mach-omap2: remove NULL board_mux from board files 2010-12-02 17:03:41 -08:00
omap4-common.c omap4: l2x0: Enable early BRESP bit 2010-12-18 09:33:01 -08:00
omap44xx-smc.S omap4: Add smc API to read AuxCoreBoot0 register 2010-08-02 13:18:18 +03:00
omap_hwmod_3xxx_data.c OMAP2+: wd_timer: disable on boot via hwmod postsetup mechanism 2010-12-21 19:57:40 -07:00
omap_hwmod_44xx_data.c OMAP4: hwmod data: Add SYSS_HAS_RESET_STATUS flag 2010-12-21 21:08:33 -07:00
omap_hwmod_2420_data.c OMAP2+: wd_timer: disable on boot via hwmod postsetup mechanism 2010-12-21 19:57:40 -07:00
omap_hwmod_2430_data.c OMAP2+: wd_timer: disable on boot via hwmod postsetup mechanism 2010-12-21 19:57:40 -07:00
omap_hwmod_common_data.c OMAP: hwmod data: add class for IVA hwmods 2010-07-26 16:34:31 -06:00
omap_hwmod_common_data.h OMAP: hwmod data: add class for IVA hwmods 2010-07-26 16:34:31 -06:00
omap_hwmod.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
omap_opp_data.h omap: opp: add OMAP3 OPP table data and common init 2010-12-21 14:30:40 -08:00
omap-headsmp.S omap4: Add smc API to read AuxCoreBoot0 register 2010-08-02 13:18:18 +03:00
omap-hotplug.c omap4: hotplug: Add basic CPU hotplug support 2010-08-02 13:18:19 +03:00
omap-iommu.c OMAP: iommu: make iva2 iommu selectable 2010-12-15 11:33:31 -06:00
omap-smp.c omap: Fix sev instruction usage for multi-omap 2010-08-16 09:22:04 +03:00
opp2xxx.h omap2/3: Multiboot compile fixes to compile in omap2 and omap3 2010-02-15 09:26:55 -08:00
opp3xxx_data.c omap: opp: add OMAP3 OPP table data and common init 2010-12-21 14:30:40 -08:00
opp4xxx_data.c omap4: opp: add OPP table data 2010-12-21 14:30:40 -08:00
opp2420_data.c
opp2430_data.c
opp.c omap: opp: add OMAP3 OPP table data and common init 2010-12-21 14:30:40 -08:00
pm24xx.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
pm34xx.c OMAP3: control/PM: move padconf save code to mach-omap2/control.c 2010-12-21 21:05:16 -07:00
pm44xx.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
pm_bus.c OMAP2+: PM: initial runtime PM core support 2010-09-21 11:51:23 -07:00
pm-debug.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
pm.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
pm.h OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomain2xxx_3xxx.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomain44xx.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomain-common.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomain.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomain.h OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomains2xxx_3xxx_data.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomains2xxx_3xxx_data.h OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomains2xxx_data.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomains3xxx_data.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomains44xx_data.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
prcm44xx.h OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
prcm_mpu44xx.c OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
prcm_mpu44xx.h OMAP4: CM instances: add clockdomain register offsets 2010-12-21 21:05:15 -07:00
prcm-common.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prcm.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
prm2xxx_3xxx.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
prm2xxx_3xxx.h OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
prm44xx.c OMAP4: PRCM: move global reset function for OMAP4 to an OMAP4-specific file 2010-12-21 21:05:14 -07:00
prm44xx.h OMAP4: CM instances: add clockdomain register offsets 2010-12-21 21:05:15 -07:00
prm-regbits-24xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prm-regbits-34xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prm-regbits-44xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prm.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prminst44xx.c OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
prminst44xx.h OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
scrm44xx.h OMAP4: PRCM: Add SCRM header file 2010-12-21 20:01:54 -07:00
sdram-hynix-h8mbx00u0mer-0em.h
sdram-micron-mt46h32m32lf-6.h
sdram-nokia.c arm: omap: sdram-nokia: add 97.6/195.2 MHz timing data 2010-12-17 15:13:46 -08:00
sdram-nokia.h arm: omap: add sdram-nokia.h 2010-12-17 15:13:44 -08:00
sdram-numonyx-m65kxxxxam.h omap3: SDRC: add timing data for Numonyx M65KxxxxAM 2010-02-17 17:23:20 -08:00
sdram-qimonda-hyb18m512160af-6.h
sdrc2xxx.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
sdrc.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
sdrc.h OMAP2+: use global values for the SRAM PA addresses 2010-12-21 14:45:56 -08:00
serial.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
sleep24xx.S
sleep34xx.S OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
sram34xx.S OMAP2/3: SRAM: add comment about crashes during a TLB miss 2010-12-21 21:08:14 -07:00
sram242x.S OMAP2/3: SRAM: add comment about crashes during a TLB miss 2010-12-21 21:08:14 -07:00
sram243x.S OMAP2/3: SRAM: add comment about crashes during a TLB miss 2010-12-21 21:08:14 -07:00
timer-gp.c arm: omap2: timer-gp: delete unused variable 2010-11-24 16:49:42 -08:00
timer-gp.h OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
timer-mpu.c omap4: Use irq line defines from irq-44xx.h 2010-02-23 15:29:08 -08:00
usb-ehci.c omap: mux: Remove old mux code 2010-07-05 16:31:40 +03:00
usb-fs.c OMAP: control: move plat-omap/control.h to mach-omap2/control.h 2010-10-08 11:40:20 -06:00
usb-musb.c USB: AM35x: Add musb support 2010-10-22 10:22:16 -07:00
usb-tusb6010.c omap: mux: Convert 2420 platform init code to use new mux code 2010-07-05 16:31:40 +03:00
wd_timer.c OMAP2+: wd_timer: disable on boot via hwmod postsetup mechanism 2010-12-21 19:57:40 -07:00
wd_timer.h OMAP2+: wd_timer: separate watchdog disable code from the rest of mach-omap2/devices.c 2010-12-21 19:56:17 -07:00