forked from Minki/linux
a886bd9226
We should signal connect (pull up dp) after we have already at peripheral mode, otherwise, the dp may be toggled due to we reset controller or do disconnect during the initialization for peripheral, then, the host may be confused during the enumeration, eg, it finds the reset can't succeed, but the device is still there, see below error message. hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected hub 1-0:1.0: cannot reset port 1 (err = -32) hub 1-0:1.0: cannot reset port 1 (err = -32) hub 1-0:1.0: cannot reset port 1 (err = -32) hub 1-0:1.0: cannot reset port 1 (err = -32) hub 1-0:1.0: cannot reset port 1 (err = -32) hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? hub 1-0:1.0: cannot reset port 1 (err = -32) hub 1-0:1.0: cannot reset port 1 (err = -32) hub 1-0:1.0: cannot reset port 1 (err = -32) hub 1-0:1.0: cannot reset port 1 (err = -32) hub 1-0:1.0: cannot reset port 1 (err = -32) hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? hub 1-0:1.0: cannot reset port 1 (err = -32) hub 1-0:1.0: cannot reset port 1 (err = -32) hub 1-0:1.0: cannot reset port 1 (err = -32) hub 1-0:1.0: cannot reset port 1 (err = -32) hub 1-0:1.0: cannot reset port 1 (err = -32) hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? hub 1-0:1.0: cannot reset port 1 (err = -32) hub 1-0:1.0: cannot reset port 1 (err = -32) hub 1-0:1.0: cannot reset port 1 (err = -32) hub 1-0:1.0: cannot reset port 1 (err = -32) hub 1-0:1.0: cannot reset port 1 (err = -32) hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? hub 1-0:1.0: unable to enumerate USB device on port 1 Fixes: the issue existed when the otg fsm code was added. Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
368 lines
10 KiB
C
368 lines
10 KiB
C
/*
|
|
* OTG Finite State Machine from OTG spec
|
|
*
|
|
* Copyright (C) 2007,2008 Freescale Semiconductor, Inc.
|
|
*
|
|
* Author: Li Yang <LeoLi@freescale.com>
|
|
* Jerry Huang <Chang-Ming.Huang@freescale.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/gadget.h>
|
|
#include <linux/usb/otg.h>
|
|
#include <linux/usb/otg-fsm.h>
|
|
|
|
/* Change USB protocol when there is a protocol change */
|
|
static int otg_set_protocol(struct otg_fsm *fsm, int protocol)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (fsm->protocol != protocol) {
|
|
VDBG("Changing role fsm->protocol= %d; new protocol= %d\n",
|
|
fsm->protocol, protocol);
|
|
/* stop old protocol */
|
|
if (fsm->protocol == PROTO_HOST)
|
|
ret = otg_start_host(fsm, 0);
|
|
else if (fsm->protocol == PROTO_GADGET)
|
|
ret = otg_start_gadget(fsm, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* start new protocol */
|
|
if (protocol == PROTO_HOST)
|
|
ret = otg_start_host(fsm, 1);
|
|
else if (protocol == PROTO_GADGET)
|
|
ret = otg_start_gadget(fsm, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
fsm->protocol = protocol;
|
|
return 0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int state_changed;
|
|
|
|
/* Called when leaving a state. Do state clean up jobs here */
|
|
static void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state)
|
|
{
|
|
switch (old_state) {
|
|
case OTG_STATE_B_IDLE:
|
|
otg_del_timer(fsm, B_SE0_SRP);
|
|
fsm->b_se0_srp = 0;
|
|
fsm->adp_sns = 0;
|
|
fsm->adp_prb = 0;
|
|
break;
|
|
case OTG_STATE_B_SRP_INIT:
|
|
fsm->data_pulse = 0;
|
|
fsm->b_srp_done = 0;
|
|
break;
|
|
case OTG_STATE_B_PERIPHERAL:
|
|
break;
|
|
case OTG_STATE_B_WAIT_ACON:
|
|
otg_del_timer(fsm, B_ASE0_BRST);
|
|
fsm->b_ase0_brst_tmout = 0;
|
|
break;
|
|
case OTG_STATE_B_HOST:
|
|
break;
|
|
case OTG_STATE_A_IDLE:
|
|
fsm->adp_prb = 0;
|
|
break;
|
|
case OTG_STATE_A_WAIT_VRISE:
|
|
otg_del_timer(fsm, A_WAIT_VRISE);
|
|
fsm->a_wait_vrise_tmout = 0;
|
|
break;
|
|
case OTG_STATE_A_WAIT_BCON:
|
|
otg_del_timer(fsm, A_WAIT_BCON);
|
|
fsm->a_wait_bcon_tmout = 0;
|
|
break;
|
|
case OTG_STATE_A_HOST:
|
|
otg_del_timer(fsm, A_WAIT_ENUM);
|
|
break;
|
|
case OTG_STATE_A_SUSPEND:
|
|
otg_del_timer(fsm, A_AIDL_BDIS);
|
|
fsm->a_aidl_bdis_tmout = 0;
|
|
fsm->a_suspend_req_inf = 0;
|
|
break;
|
|
case OTG_STATE_A_PERIPHERAL:
|
|
otg_del_timer(fsm, A_BIDL_ADIS);
|
|
fsm->a_bidl_adis_tmout = 0;
|
|
break;
|
|
case OTG_STATE_A_WAIT_VFALL:
|
|
otg_del_timer(fsm, A_WAIT_VFALL);
|
|
fsm->a_wait_vfall_tmout = 0;
|
|
otg_del_timer(fsm, A_WAIT_VRISE);
|
|
break;
|
|
case OTG_STATE_A_VBUS_ERR:
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Called when entering a state */
|
|
static int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
|
|
{
|
|
state_changed = 1;
|
|
if (fsm->otg->state == new_state)
|
|
return 0;
|
|
VDBG("Set state: %s\n", usb_otg_state_string(new_state));
|
|
otg_leave_state(fsm, fsm->otg->state);
|
|
switch (new_state) {
|
|
case OTG_STATE_B_IDLE:
|
|
otg_drv_vbus(fsm, 0);
|
|
otg_chrg_vbus(fsm, 0);
|
|
otg_loc_conn(fsm, 0);
|
|
otg_loc_sof(fsm, 0);
|
|
/*
|
|
* Driver is responsible for starting ADP probing
|
|
* if ADP sensing times out.
|
|
*/
|
|
otg_start_adp_sns(fsm);
|
|
otg_set_protocol(fsm, PROTO_UNDEF);
|
|
otg_add_timer(fsm, B_SE0_SRP);
|
|
break;
|
|
case OTG_STATE_B_SRP_INIT:
|
|
otg_start_pulse(fsm);
|
|
otg_loc_sof(fsm, 0);
|
|
otg_set_protocol(fsm, PROTO_UNDEF);
|
|
otg_add_timer(fsm, B_SRP_FAIL);
|
|
break;
|
|
case OTG_STATE_B_PERIPHERAL:
|
|
otg_chrg_vbus(fsm, 0);
|
|
otg_loc_sof(fsm, 0);
|
|
otg_set_protocol(fsm, PROTO_GADGET);
|
|
otg_loc_conn(fsm, 1);
|
|
break;
|
|
case OTG_STATE_B_WAIT_ACON:
|
|
otg_chrg_vbus(fsm, 0);
|
|
otg_loc_conn(fsm, 0);
|
|
otg_loc_sof(fsm, 0);
|
|
otg_set_protocol(fsm, PROTO_HOST);
|
|
otg_add_timer(fsm, B_ASE0_BRST);
|
|
fsm->a_bus_suspend = 0;
|
|
break;
|
|
case OTG_STATE_B_HOST:
|
|
otg_chrg_vbus(fsm, 0);
|
|
otg_loc_conn(fsm, 0);
|
|
otg_loc_sof(fsm, 1);
|
|
otg_set_protocol(fsm, PROTO_HOST);
|
|
usb_bus_start_enum(fsm->otg->host,
|
|
fsm->otg->host->otg_port);
|
|
break;
|
|
case OTG_STATE_A_IDLE:
|
|
otg_drv_vbus(fsm, 0);
|
|
otg_chrg_vbus(fsm, 0);
|
|
otg_loc_conn(fsm, 0);
|
|
otg_loc_sof(fsm, 0);
|
|
otg_start_adp_prb(fsm);
|
|
otg_set_protocol(fsm, PROTO_HOST);
|
|
break;
|
|
case OTG_STATE_A_WAIT_VRISE:
|
|
otg_drv_vbus(fsm, 1);
|
|
otg_loc_conn(fsm, 0);
|
|
otg_loc_sof(fsm, 0);
|
|
otg_set_protocol(fsm, PROTO_HOST);
|
|
otg_add_timer(fsm, A_WAIT_VRISE);
|
|
break;
|
|
case OTG_STATE_A_WAIT_BCON:
|
|
otg_drv_vbus(fsm, 1);
|
|
otg_loc_conn(fsm, 0);
|
|
otg_loc_sof(fsm, 0);
|
|
otg_set_protocol(fsm, PROTO_HOST);
|
|
otg_add_timer(fsm, A_WAIT_BCON);
|
|
break;
|
|
case OTG_STATE_A_HOST:
|
|
otg_drv_vbus(fsm, 1);
|
|
otg_loc_conn(fsm, 0);
|
|
otg_loc_sof(fsm, 1);
|
|
otg_set_protocol(fsm, PROTO_HOST);
|
|
/*
|
|
* When HNP is triggered while a_bus_req = 0, a_host will
|
|
* suspend too fast to complete a_set_b_hnp_en
|
|
*/
|
|
if (!fsm->a_bus_req || fsm->a_suspend_req_inf)
|
|
otg_add_timer(fsm, A_WAIT_ENUM);
|
|
break;
|
|
case OTG_STATE_A_SUSPEND:
|
|
otg_drv_vbus(fsm, 1);
|
|
otg_loc_conn(fsm, 0);
|
|
otg_loc_sof(fsm, 0);
|
|
otg_set_protocol(fsm, PROTO_HOST);
|
|
otg_add_timer(fsm, A_AIDL_BDIS);
|
|
|
|
break;
|
|
case OTG_STATE_A_PERIPHERAL:
|
|
otg_loc_sof(fsm, 0);
|
|
otg_set_protocol(fsm, PROTO_GADGET);
|
|
otg_drv_vbus(fsm, 1);
|
|
otg_loc_conn(fsm, 1);
|
|
otg_add_timer(fsm, A_BIDL_ADIS);
|
|
break;
|
|
case OTG_STATE_A_WAIT_VFALL:
|
|
otg_drv_vbus(fsm, 0);
|
|
otg_loc_conn(fsm, 0);
|
|
otg_loc_sof(fsm, 0);
|
|
otg_set_protocol(fsm, PROTO_HOST);
|
|
otg_add_timer(fsm, A_WAIT_VFALL);
|
|
break;
|
|
case OTG_STATE_A_VBUS_ERR:
|
|
otg_drv_vbus(fsm, 0);
|
|
otg_loc_conn(fsm, 0);
|
|
otg_loc_sof(fsm, 0);
|
|
otg_set_protocol(fsm, PROTO_UNDEF);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
fsm->otg->state = new_state;
|
|
return 0;
|
|
}
|
|
|
|
/* State change judgement */
|
|
int otg_statemachine(struct otg_fsm *fsm)
|
|
{
|
|
enum usb_otg_state state;
|
|
|
|
mutex_lock(&fsm->lock);
|
|
|
|
state = fsm->otg->state;
|
|
state_changed = 0;
|
|
/* State machine state change judgement */
|
|
|
|
switch (state) {
|
|
case OTG_STATE_UNDEFINED:
|
|
VDBG("fsm->id = %d\n", fsm->id);
|
|
if (fsm->id)
|
|
otg_set_state(fsm, OTG_STATE_B_IDLE);
|
|
else
|
|
otg_set_state(fsm, OTG_STATE_A_IDLE);
|
|
break;
|
|
case OTG_STATE_B_IDLE:
|
|
if (!fsm->id)
|
|
otg_set_state(fsm, OTG_STATE_A_IDLE);
|
|
else if (fsm->b_sess_vld && fsm->otg->gadget)
|
|
otg_set_state(fsm, OTG_STATE_B_PERIPHERAL);
|
|
else if ((fsm->b_bus_req || fsm->adp_change || fsm->power_up) &&
|
|
fsm->b_ssend_srp && fsm->b_se0_srp)
|
|
otg_set_state(fsm, OTG_STATE_B_SRP_INIT);
|
|
break;
|
|
case OTG_STATE_B_SRP_INIT:
|
|
if (!fsm->id || fsm->b_srp_done)
|
|
otg_set_state(fsm, OTG_STATE_B_IDLE);
|
|
break;
|
|
case OTG_STATE_B_PERIPHERAL:
|
|
if (!fsm->id || !fsm->b_sess_vld)
|
|
otg_set_state(fsm, OTG_STATE_B_IDLE);
|
|
else if (fsm->b_bus_req && fsm->otg->
|
|
gadget->b_hnp_enable && fsm->a_bus_suspend)
|
|
otg_set_state(fsm, OTG_STATE_B_WAIT_ACON);
|
|
break;
|
|
case OTG_STATE_B_WAIT_ACON:
|
|
if (fsm->a_conn)
|
|
otg_set_state(fsm, OTG_STATE_B_HOST);
|
|
else if (!fsm->id || !fsm->b_sess_vld)
|
|
otg_set_state(fsm, OTG_STATE_B_IDLE);
|
|
else if (fsm->a_bus_resume || fsm->b_ase0_brst_tmout) {
|
|
fsm->b_ase0_brst_tmout = 0;
|
|
otg_set_state(fsm, OTG_STATE_B_PERIPHERAL);
|
|
}
|
|
break;
|
|
case OTG_STATE_B_HOST:
|
|
if (!fsm->id || !fsm->b_sess_vld)
|
|
otg_set_state(fsm, OTG_STATE_B_IDLE);
|
|
else if (!fsm->b_bus_req || !fsm->a_conn || fsm->test_device)
|
|
otg_set_state(fsm, OTG_STATE_B_PERIPHERAL);
|
|
break;
|
|
case OTG_STATE_A_IDLE:
|
|
if (fsm->id)
|
|
otg_set_state(fsm, OTG_STATE_B_IDLE);
|
|
else if (!fsm->a_bus_drop && (fsm->a_bus_req ||
|
|
fsm->a_srp_det || fsm->adp_change || fsm->power_up))
|
|
otg_set_state(fsm, OTG_STATE_A_WAIT_VRISE);
|
|
break;
|
|
case OTG_STATE_A_WAIT_VRISE:
|
|
if (fsm->a_vbus_vld)
|
|
otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
|
|
else if (fsm->id || fsm->a_bus_drop ||
|
|
fsm->a_wait_vrise_tmout)
|
|
otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
|
|
break;
|
|
case OTG_STATE_A_WAIT_BCON:
|
|
if (!fsm->a_vbus_vld)
|
|
otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
|
|
else if (fsm->b_conn)
|
|
otg_set_state(fsm, OTG_STATE_A_HOST);
|
|
else if (fsm->id || fsm->a_bus_drop || fsm->a_wait_bcon_tmout)
|
|
otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
|
|
break;
|
|
case OTG_STATE_A_HOST:
|
|
if (fsm->id || fsm->a_bus_drop)
|
|
otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
|
|
else if ((!fsm->a_bus_req || fsm->a_suspend_req_inf) &&
|
|
fsm->otg->host->b_hnp_enable)
|
|
otg_set_state(fsm, OTG_STATE_A_SUSPEND);
|
|
else if (!fsm->b_conn)
|
|
otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
|
|
else if (!fsm->a_vbus_vld)
|
|
otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
|
|
break;
|
|
case OTG_STATE_A_SUSPEND:
|
|
if (!fsm->b_conn && fsm->otg->host->b_hnp_enable)
|
|
otg_set_state(fsm, OTG_STATE_A_PERIPHERAL);
|
|
else if (!fsm->b_conn && !fsm->otg->host->b_hnp_enable)
|
|
otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
|
|
else if (fsm->a_bus_req || fsm->b_bus_resume)
|
|
otg_set_state(fsm, OTG_STATE_A_HOST);
|
|
else if (fsm->id || fsm->a_bus_drop || fsm->a_aidl_bdis_tmout)
|
|
otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
|
|
else if (!fsm->a_vbus_vld)
|
|
otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
|
|
break;
|
|
case OTG_STATE_A_PERIPHERAL:
|
|
if (fsm->id || fsm->a_bus_drop)
|
|
otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
|
|
else if (fsm->a_bidl_adis_tmout || fsm->b_bus_suspend)
|
|
otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
|
|
else if (!fsm->a_vbus_vld)
|
|
otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
|
|
break;
|
|
case OTG_STATE_A_WAIT_VFALL:
|
|
if (fsm->a_wait_vfall_tmout)
|
|
otg_set_state(fsm, OTG_STATE_A_IDLE);
|
|
break;
|
|
case OTG_STATE_A_VBUS_ERR:
|
|
if (fsm->id || fsm->a_bus_drop || fsm->a_clr_err)
|
|
otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
mutex_unlock(&fsm->lock);
|
|
|
|
VDBG("quit statemachine, changed = %d\n", state_changed);
|
|
return state_changed;
|
|
}
|
|
EXPORT_SYMBOL_GPL(otg_statemachine);
|