forked from Minki/linux
0c6e718389
According to the Armada38x functional errata FE-3124064, writing to the RTC TIME register may fail. As a workaround, after writing to RTC TIME register, issue a dummy write of 0x0 twice to the RTC Status register. This is the updated implementation of the Errata that eliminates the need of the long 100ms delay during the RTC set time procedure. [gregory.clement@free-electrons.com]: removed the mutex and use the spinlock again Signed-off-by: Nadav Haklai <nadavh@marvell.com> Reviewed-by: Neta Zur Hershkovits <neta@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
313 lines
7.6 KiB
C
313 lines
7.6 KiB
C
/*
|
|
* RTC driver for the Armada 38x Marvell SoCs
|
|
*
|
|
* Copyright (C) 2015 Marvell
|
|
*
|
|
* Gregory Clement <gregory.clement@free-electrons.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/rtc.h>
|
|
|
|
#define RTC_STATUS 0x0
|
|
#define RTC_STATUS_ALARM1 BIT(0)
|
|
#define RTC_STATUS_ALARM2 BIT(1)
|
|
#define RTC_IRQ1_CONF 0x4
|
|
#define RTC_IRQ1_AL_EN BIT(0)
|
|
#define RTC_IRQ1_FREQ_EN BIT(1)
|
|
#define RTC_IRQ1_FREQ_1HZ BIT(2)
|
|
#define RTC_TIME 0xC
|
|
#define RTC_ALARM1 0x10
|
|
|
|
#define SOC_RTC_INTERRUPT 0x8
|
|
#define SOC_RTC_ALARM1 BIT(0)
|
|
#define SOC_RTC_ALARM2 BIT(1)
|
|
#define SOC_RTC_ALARM1_MASK BIT(2)
|
|
#define SOC_RTC_ALARM2_MASK BIT(3)
|
|
|
|
struct armada38x_rtc {
|
|
struct rtc_device *rtc_dev;
|
|
void __iomem *regs;
|
|
void __iomem *regs_soc;
|
|
spinlock_t lock;
|
|
int irq;
|
|
};
|
|
|
|
/*
|
|
* According to the datasheet, the OS should wait 5us after every
|
|
* register write to the RTC hard macro so that the required update
|
|
* can occur without holding off the system bus
|
|
*/
|
|
static void rtc_delayed_write(u32 val, struct armada38x_rtc *rtc, int offset)
|
|
{
|
|
writel(val, rtc->regs + offset);
|
|
udelay(5);
|
|
}
|
|
|
|
static int armada38x_rtc_read_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
struct armada38x_rtc *rtc = dev_get_drvdata(dev);
|
|
unsigned long time, time_check, flags;
|
|
|
|
spin_lock_irqsave(&rtc->lock, flags);
|
|
time = readl(rtc->regs + RTC_TIME);
|
|
/*
|
|
* WA for failing time set attempts. As stated in HW ERRATA if
|
|
* more than one second between two time reads is detected
|
|
* then read once again.
|
|
*/
|
|
time_check = readl(rtc->regs + RTC_TIME);
|
|
if ((time_check - time) > 1)
|
|
time_check = readl(rtc->regs + RTC_TIME);
|
|
|
|
spin_unlock_irqrestore(&rtc->lock, flags);
|
|
|
|
rtc_time_to_tm(time_check, tm);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int armada38x_rtc_set_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
struct armada38x_rtc *rtc = dev_get_drvdata(dev);
|
|
int ret = 0;
|
|
unsigned long time, flags;
|
|
|
|
ret = rtc_tm_to_time(tm, &time);
|
|
|
|
if (ret)
|
|
goto out;
|
|
/*
|
|
* According to errata FE-3124064, Write to RTC TIME register
|
|
* may fail. As a workaround, after writing to RTC TIME
|
|
* register, issue a dummy write of 0x0 twice to RTC Status
|
|
* register.
|
|
*/
|
|
spin_lock_irqsave(&rtc->lock, flags);
|
|
rtc_delayed_write(time, rtc, RTC_TIME);
|
|
rtc_delayed_write(0, rtc, RTC_STATUS);
|
|
rtc_delayed_write(0, rtc, RTC_STATUS);
|
|
spin_unlock_irqrestore(&rtc->lock, flags);
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int armada38x_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
struct armada38x_rtc *rtc = dev_get_drvdata(dev);
|
|
unsigned long time, flags;
|
|
u32 val;
|
|
|
|
spin_lock_irqsave(&rtc->lock, flags);
|
|
|
|
time = readl(rtc->regs + RTC_ALARM1);
|
|
val = readl(rtc->regs + RTC_IRQ1_CONF) & RTC_IRQ1_AL_EN;
|
|
|
|
spin_unlock_irqrestore(&rtc->lock, flags);
|
|
|
|
alrm->enabled = val ? 1 : 0;
|
|
rtc_time_to_tm(time, &alrm->time);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int armada38x_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
struct armada38x_rtc *rtc = dev_get_drvdata(dev);
|
|
unsigned long time, flags;
|
|
int ret = 0;
|
|
u32 val;
|
|
|
|
ret = rtc_tm_to_time(&alrm->time, &time);
|
|
|
|
if (ret)
|
|
goto out;
|
|
|
|
spin_lock_irqsave(&rtc->lock, flags);
|
|
|
|
rtc_delayed_write(time, rtc, RTC_ALARM1);
|
|
|
|
if (alrm->enabled) {
|
|
rtc_delayed_write(RTC_IRQ1_AL_EN, rtc, RTC_IRQ1_CONF);
|
|
val = readl(rtc->regs_soc + SOC_RTC_INTERRUPT);
|
|
writel(val | SOC_RTC_ALARM1_MASK,
|
|
rtc->regs_soc + SOC_RTC_INTERRUPT);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&rtc->lock, flags);
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int armada38x_rtc_alarm_irq_enable(struct device *dev,
|
|
unsigned int enabled)
|
|
{
|
|
struct armada38x_rtc *rtc = dev_get_drvdata(dev);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&rtc->lock, flags);
|
|
|
|
if (enabled)
|
|
rtc_delayed_write(RTC_IRQ1_AL_EN, rtc, RTC_IRQ1_CONF);
|
|
else
|
|
rtc_delayed_write(0, rtc, RTC_IRQ1_CONF);
|
|
|
|
spin_unlock_irqrestore(&rtc->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t armada38x_rtc_alarm_irq(int irq, void *data)
|
|
{
|
|
struct armada38x_rtc *rtc = data;
|
|
u32 val;
|
|
int event = RTC_IRQF | RTC_AF;
|
|
|
|
dev_dbg(&rtc->rtc_dev->dev, "%s:irq(%d)\n", __func__, irq);
|
|
|
|
spin_lock(&rtc->lock);
|
|
|
|
val = readl(rtc->regs_soc + SOC_RTC_INTERRUPT);
|
|
|
|
writel(val & ~SOC_RTC_ALARM1, rtc->regs_soc + SOC_RTC_INTERRUPT);
|
|
val = readl(rtc->regs + RTC_IRQ1_CONF);
|
|
/* disable all the interrupts for alarm 1 */
|
|
rtc_delayed_write(0, rtc, RTC_IRQ1_CONF);
|
|
/* Ack the event */
|
|
rtc_delayed_write(RTC_STATUS_ALARM1, rtc, RTC_STATUS);
|
|
|
|
spin_unlock(&rtc->lock);
|
|
|
|
if (val & RTC_IRQ1_FREQ_EN) {
|
|
if (val & RTC_IRQ1_FREQ_1HZ)
|
|
event |= RTC_UF;
|
|
else
|
|
event |= RTC_PF;
|
|
}
|
|
|
|
rtc_update_irq(rtc->rtc_dev, 1, event);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct rtc_class_ops armada38x_rtc_ops = {
|
|
.read_time = armada38x_rtc_read_time,
|
|
.set_time = armada38x_rtc_set_time,
|
|
.read_alarm = armada38x_rtc_read_alarm,
|
|
.set_alarm = armada38x_rtc_set_alarm,
|
|
.alarm_irq_enable = armada38x_rtc_alarm_irq_enable,
|
|
};
|
|
|
|
static __init int armada38x_rtc_probe(struct platform_device *pdev)
|
|
{
|
|
struct resource *res;
|
|
struct armada38x_rtc *rtc;
|
|
int ret;
|
|
|
|
rtc = devm_kzalloc(&pdev->dev, sizeof(struct armada38x_rtc),
|
|
GFP_KERNEL);
|
|
if (!rtc)
|
|
return -ENOMEM;
|
|
|
|
spin_lock_init(&rtc->lock);
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rtc");
|
|
rtc->regs = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(rtc->regs))
|
|
return PTR_ERR(rtc->regs);
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rtc-soc");
|
|
rtc->regs_soc = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(rtc->regs_soc))
|
|
return PTR_ERR(rtc->regs_soc);
|
|
|
|
rtc->irq = platform_get_irq(pdev, 0);
|
|
|
|
if (rtc->irq < 0) {
|
|
dev_err(&pdev->dev, "no irq\n");
|
|
return rtc->irq;
|
|
}
|
|
if (devm_request_irq(&pdev->dev, rtc->irq, armada38x_rtc_alarm_irq,
|
|
0, pdev->name, rtc) < 0) {
|
|
dev_warn(&pdev->dev, "Interrupt not available.\n");
|
|
rtc->irq = -1;
|
|
/*
|
|
* If there is no interrupt available then we can't
|
|
* use the alarm
|
|
*/
|
|
armada38x_rtc_ops.set_alarm = NULL;
|
|
armada38x_rtc_ops.alarm_irq_enable = NULL;
|
|
}
|
|
platform_set_drvdata(pdev, rtc);
|
|
if (rtc->irq != -1)
|
|
device_init_wakeup(&pdev->dev, 1);
|
|
|
|
rtc->rtc_dev = devm_rtc_device_register(&pdev->dev, pdev->name,
|
|
&armada38x_rtc_ops, THIS_MODULE);
|
|
if (IS_ERR(rtc->rtc_dev)) {
|
|
ret = PTR_ERR(rtc->rtc_dev);
|
|
dev_err(&pdev->dev, "Failed to register RTC device: %d\n", ret);
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int armada38x_rtc_suspend(struct device *dev)
|
|
{
|
|
if (device_may_wakeup(dev)) {
|
|
struct armada38x_rtc *rtc = dev_get_drvdata(dev);
|
|
|
|
return enable_irq_wake(rtc->irq);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int armada38x_rtc_resume(struct device *dev)
|
|
{
|
|
if (device_may_wakeup(dev)) {
|
|
struct armada38x_rtc *rtc = dev_get_drvdata(dev);
|
|
|
|
return disable_irq_wake(rtc->irq);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(armada38x_rtc_pm_ops,
|
|
armada38x_rtc_suspend, armada38x_rtc_resume);
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id armada38x_rtc_of_match_table[] = {
|
|
{ .compatible = "marvell,armada-380-rtc", },
|
|
{}
|
|
};
|
|
#endif
|
|
|
|
static struct platform_driver armada38x_rtc_driver = {
|
|
.driver = {
|
|
.name = "armada38x-rtc",
|
|
.pm = &armada38x_rtc_pm_ops,
|
|
.of_match_table = of_match_ptr(armada38x_rtc_of_match_table),
|
|
},
|
|
};
|
|
|
|
module_platform_driver_probe(armada38x_rtc_driver, armada38x_rtc_probe);
|
|
|
|
MODULE_DESCRIPTION("Marvell Armada 38x RTC driver");
|
|
MODULE_AUTHOR("Gregory CLEMENT <gregory.clement@free-electrons.com>");
|
|
MODULE_LICENSE("GPL");
|