linux/drivers/misc/habanalabs/common/pci.c
Greg Kroah-Hartman 7b16a15524 habanalabs: fix up absolute include instructions
There's no need to try to be cute with the include file locations in the
Makefile, so just specify exactly where the files are.

Bonus is this fixes the problem of building with O= as well as trying to
just build the subdirectory alone.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Omer Shpigelman <oshpigelman@habana.ai>
Cc: Tomer Tayar <ttayar@habana.ai>
Cc: Moti Haimovski <mhaimovski@habana.ai>
Cc: Ofir Bitton <obitton@habana.ai>
Cc: Ben Segal <bpsegal20@gmail.com>
Cc: Christine Gharzuzi <cgharzuzi@habana.ai>
Cc: Pawel Piskorski <ppiskorski@habana.ai>
Link: https://lore.kernel.org/r/20200728171851.55842-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29 08:15:50 +02:00

401 lines
10 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2016-2019 HabanaLabs, Ltd.
* All Rights Reserved.
*/
#include "habanalabs.h"
#include "../include/hw_ip/pci/pci_general.h"
#include <linux/pci.h>
#include <linux/bitfield.h>
#define HL_PLDM_PCI_ELBI_TIMEOUT_MSEC (HL_PCI_ELBI_TIMEOUT_MSEC * 10)
#define IATU_REGION_CTRL_REGION_EN_MASK BIT(31)
#define IATU_REGION_CTRL_MATCH_MODE_MASK BIT(30)
#define IATU_REGION_CTRL_NUM_MATCH_EN_MASK BIT(19)
#define IATU_REGION_CTRL_BAR_NUM_MASK GENMASK(10, 8)
/**
* hl_pci_bars_map() - Map PCI BARs.
* @hdev: Pointer to hl_device structure.
* @name: Array of BAR names.
* @is_wc: Array with flag per BAR whether a write-combined mapping is needed.
*
* Request PCI regions and map them to kernel virtual addresses.
*
* Return: 0 on success, non-zero for failure.
*/
int hl_pci_bars_map(struct hl_device *hdev, const char * const name[3],
bool is_wc[3])
{
struct pci_dev *pdev = hdev->pdev;
int rc, i, bar;
rc = pci_request_regions(pdev, HL_NAME);
if (rc) {
dev_err(hdev->dev, "Cannot obtain PCI resources\n");
return rc;
}
for (i = 0 ; i < 3 ; i++) {
bar = i * 2; /* 64-bit BARs */
hdev->pcie_bar[bar] = is_wc[i] ?
pci_ioremap_wc_bar(pdev, bar) :
pci_ioremap_bar(pdev, bar);
if (!hdev->pcie_bar[bar]) {
dev_err(hdev->dev, "pci_ioremap%s_bar failed for %s\n",
is_wc[i] ? "_wc" : "", name[i]);
rc = -ENODEV;
goto err;
}
}
return 0;
err:
for (i = 2 ; i >= 0 ; i--) {
bar = i * 2; /* 64-bit BARs */
if (hdev->pcie_bar[bar])
iounmap(hdev->pcie_bar[bar]);
}
pci_release_regions(pdev);
return rc;
}
/**
* hl_pci_bars_unmap() - Unmap PCI BARS.
* @hdev: Pointer to hl_device structure.
*
* Release all PCI BARs and unmap their virtual addresses.
*/
static void hl_pci_bars_unmap(struct hl_device *hdev)
{
struct pci_dev *pdev = hdev->pdev;
int i, bar;
for (i = 2 ; i >= 0 ; i--) {
bar = i * 2; /* 64-bit BARs */
iounmap(hdev->pcie_bar[bar]);
}
pci_release_regions(pdev);
}
/**
* hl_pci_elbi_write() - Write through the ELBI interface.
* @hdev: Pointer to hl_device structure.
* @addr: Address to write to
* @data: Data to write
*
* Return: 0 on success, negative value for failure.
*/
static int hl_pci_elbi_write(struct hl_device *hdev, u64 addr, u32 data)
{
struct pci_dev *pdev = hdev->pdev;
ktime_t timeout;
u64 msec;
u32 val;
if (hdev->pldm)
msec = HL_PLDM_PCI_ELBI_TIMEOUT_MSEC;
else
msec = HL_PCI_ELBI_TIMEOUT_MSEC;
/* Clear previous status */
pci_write_config_dword(pdev, mmPCI_CONFIG_ELBI_STS, 0);
pci_write_config_dword(pdev, mmPCI_CONFIG_ELBI_ADDR, (u32) addr);
pci_write_config_dword(pdev, mmPCI_CONFIG_ELBI_DATA, data);
pci_write_config_dword(pdev, mmPCI_CONFIG_ELBI_CTRL,
PCI_CONFIG_ELBI_CTRL_WRITE);
timeout = ktime_add_ms(ktime_get(), msec);
for (;;) {
pci_read_config_dword(pdev, mmPCI_CONFIG_ELBI_STS, &val);
if (val & PCI_CONFIG_ELBI_STS_MASK)
break;
if (ktime_compare(ktime_get(), timeout) > 0) {
pci_read_config_dword(pdev, mmPCI_CONFIG_ELBI_STS,
&val);
break;
}
usleep_range(300, 500);
}
if ((val & PCI_CONFIG_ELBI_STS_MASK) == PCI_CONFIG_ELBI_STS_DONE)
return 0;
if (val & PCI_CONFIG_ELBI_STS_ERR) {
dev_err(hdev->dev, "Error writing to ELBI\n");
return -EIO;
}
if (!(val & PCI_CONFIG_ELBI_STS_MASK)) {
dev_err(hdev->dev, "ELBI write didn't finish in time\n");
return -EIO;
}
dev_err(hdev->dev, "ELBI write has undefined bits in status\n");
return -EIO;
}
/**
* hl_pci_iatu_write() - iatu write routine.
* @hdev: Pointer to hl_device structure.
* @addr: Address to write to
* @data: Data to write
*
* Return: 0 on success, negative value for failure.
*/
int hl_pci_iatu_write(struct hl_device *hdev, u32 addr, u32 data)
{
struct asic_fixed_properties *prop = &hdev->asic_prop;
u32 dbi_offset;
int rc;
dbi_offset = addr & 0xFFF;
rc = hl_pci_elbi_write(hdev, prop->pcie_aux_dbi_reg_addr, 0x00300000);
rc |= hl_pci_elbi_write(hdev, prop->pcie_dbi_base_address + dbi_offset,
data);
if (rc)
return -EIO;
return 0;
}
/**
* hl_pci_reset_link_through_bridge() - Reset PCI link.
* @hdev: Pointer to hl_device structure.
*/
static void hl_pci_reset_link_through_bridge(struct hl_device *hdev)
{
struct pci_dev *pdev = hdev->pdev;
struct pci_dev *parent_port;
u16 val;
parent_port = pdev->bus->self;
pci_read_config_word(parent_port, PCI_BRIDGE_CONTROL, &val);
val |= PCI_BRIDGE_CTL_BUS_RESET;
pci_write_config_word(parent_port, PCI_BRIDGE_CONTROL, val);
ssleep(1);
val &= ~(PCI_BRIDGE_CTL_BUS_RESET);
pci_write_config_word(parent_port, PCI_BRIDGE_CONTROL, val);
ssleep(3);
}
/**
* hl_pci_set_inbound_region() - Configure inbound region
* @hdev: Pointer to hl_device structure.
* @region: Inbound region number.
* @pci_region: Inbound region parameters.
*
* Configure the iATU inbound region.
*
* Return: 0 on success, negative value for failure.
*/
int hl_pci_set_inbound_region(struct hl_device *hdev, u8 region,
struct hl_inbound_pci_region *pci_region)
{
struct asic_fixed_properties *prop = &hdev->asic_prop;
u64 bar_phys_base, region_base, region_end_address;
u32 offset, ctrl_reg_val;
int rc = 0;
/* region offset */
offset = (0x200 * region) + 0x100;
if (pci_region->mode == PCI_ADDRESS_MATCH_MODE) {
bar_phys_base = hdev->pcie_bar_phys[pci_region->bar];
region_base = bar_phys_base + pci_region->offset_in_bar;
region_end_address = region_base + pci_region->size - 1;
rc |= hl_pci_iatu_write(hdev, offset + 0x8,
lower_32_bits(region_base));
rc |= hl_pci_iatu_write(hdev, offset + 0xC,
upper_32_bits(region_base));
rc |= hl_pci_iatu_write(hdev, offset + 0x10,
lower_32_bits(region_end_address));
}
/* Point to the specified address */
rc = hl_pci_iatu_write(hdev, offset + 0x14,
lower_32_bits(pci_region->addr));
rc |= hl_pci_iatu_write(hdev, offset + 0x18,
upper_32_bits(pci_region->addr));
rc |= hl_pci_iatu_write(hdev, offset + 0x0, 0);
/* Enable + bar/address match + match enable + bar number */
ctrl_reg_val = FIELD_PREP(IATU_REGION_CTRL_REGION_EN_MASK, 1);
ctrl_reg_val |= FIELD_PREP(IATU_REGION_CTRL_MATCH_MODE_MASK,
pci_region->mode);
ctrl_reg_val |= FIELD_PREP(IATU_REGION_CTRL_NUM_MATCH_EN_MASK, 1);
if (pci_region->mode == PCI_BAR_MATCH_MODE)
ctrl_reg_val |= FIELD_PREP(IATU_REGION_CTRL_BAR_NUM_MASK,
pci_region->bar);
rc |= hl_pci_iatu_write(hdev, offset + 0x4, ctrl_reg_val);
/* Return the DBI window to the default location */
rc |= hl_pci_elbi_write(hdev, prop->pcie_aux_dbi_reg_addr, 0);
rc |= hl_pci_elbi_write(hdev, prop->pcie_aux_dbi_reg_addr + 4, 0);
if (rc)
dev_err(hdev->dev, "failed to map bar %u to 0x%08llx\n",
pci_region->bar, pci_region->addr);
return rc;
}
/**
* hl_pci_set_outbound_region() - Configure outbound region 0
* @hdev: Pointer to hl_device structure.
* @pci_region: Outbound region parameters.
*
* Configure the iATU outbound region 0.
*
* Return: 0 on success, negative value for failure.
*/
int hl_pci_set_outbound_region(struct hl_device *hdev,
struct hl_outbound_pci_region *pci_region)
{
struct asic_fixed_properties *prop = &hdev->asic_prop;
u64 outbound_region_end_address;
int rc = 0;
/* Outbound Region 0 */
outbound_region_end_address =
pci_region->addr + pci_region->size - 1;
rc |= hl_pci_iatu_write(hdev, 0x008,
lower_32_bits(pci_region->addr));
rc |= hl_pci_iatu_write(hdev, 0x00C,
upper_32_bits(pci_region->addr));
rc |= hl_pci_iatu_write(hdev, 0x010,
lower_32_bits(outbound_region_end_address));
rc |= hl_pci_iatu_write(hdev, 0x014, 0);
if ((hdev->power9_64bit_dma_enable) && (hdev->dma_mask == 64))
rc |= hl_pci_iatu_write(hdev, 0x018, 0x08000000);
else
rc |= hl_pci_iatu_write(hdev, 0x018, 0);
rc |= hl_pci_iatu_write(hdev, 0x020,
upper_32_bits(outbound_region_end_address));
/* Increase region size */
rc |= hl_pci_iatu_write(hdev, 0x000, 0x00002000);
/* Enable */
rc |= hl_pci_iatu_write(hdev, 0x004, 0x80000000);
/* Return the DBI window to the default location */
rc |= hl_pci_elbi_write(hdev, prop->pcie_aux_dbi_reg_addr, 0);
rc |= hl_pci_elbi_write(hdev, prop->pcie_aux_dbi_reg_addr + 4, 0);
return rc;
}
/**
* hl_pci_set_dma_mask() - Set DMA masks for the device.
* @hdev: Pointer to hl_device structure.
*
* This function sets the DMA masks (regular and consistent) for a specified
* value. If it doesn't succeed, it tries to set it to a fall-back value
*
* Return: 0 on success, non-zero for failure.
*/
static int hl_pci_set_dma_mask(struct hl_device *hdev)
{
struct pci_dev *pdev = hdev->pdev;
int rc;
/* set DMA mask */
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(hdev->dma_mask));
if (rc) {
dev_err(hdev->dev,
"Failed to set pci dma mask to %d bits, error %d\n",
hdev->dma_mask, rc);
return rc;
}
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(hdev->dma_mask));
if (rc) {
dev_err(hdev->dev,
"Failed to set pci consistent dma mask to %d bits, error %d\n",
hdev->dma_mask, rc);
return rc;
}
return 0;
}
/**
* hl_pci_init() - PCI initialization code.
* @hdev: Pointer to hl_device structure.
*
* Set DMA masks, initialize the PCI controller and map the PCI BARs.
*
* Return: 0 on success, non-zero for failure.
*/
int hl_pci_init(struct hl_device *hdev)
{
struct pci_dev *pdev = hdev->pdev;
int rc;
if (hdev->reset_pcilink)
hl_pci_reset_link_through_bridge(hdev);
rc = pci_enable_device_mem(pdev);
if (rc) {
dev_err(hdev->dev, "can't enable PCI device\n");
return rc;
}
pci_set_master(pdev);
rc = hdev->asic_funcs->pci_bars_map(hdev);
if (rc) {
dev_err(hdev->dev, "Failed to initialize PCI BARs\n");
goto disable_device;
}
rc = hdev->asic_funcs->init_iatu(hdev);
if (rc) {
dev_err(hdev->dev, "Failed to initialize iATU\n");
goto disable_device;
}
rc = hl_pci_set_dma_mask(hdev);
if (rc)
goto disable_device;
return 0;
disable_device:
pci_clear_master(pdev);
pci_disable_device(pdev);
return rc;
}
/**
* hl_fw_fini() - PCI finalization code.
* @hdev: Pointer to hl_device structure
*
* Unmap PCI bars and disable PCI device.
*/
void hl_pci_fini(struct hl_device *hdev)
{
hl_pci_bars_unmap(hdev);
pci_clear_master(hdev->pdev);
pci_disable_device(hdev->pdev);
}