forked from Minki/linux
7acf631889
Remove a source of latency spikes (in my case up to 10ms) by not calling code that uses mdelay() for feeding a phy statistic (rx errors for idle symbols - not data -> idle_errors) while being called with a spinlock held. As idle_errors isn't read, this patch only removes unused code and data. Later, more complicated changes may be applied to address the spinlock and allow for some PHY diagnostics by harvesting this PHY stats register fully. This patch is designed to fix the issue and be safe for longterm/stable. For the Intel e1000e driver, the same change was applied in 2008 with commit23033fad5b
("e1000e: remove phy read from inside spinlock"). The mdelay is triggered by HW/SW semaphores, thus it depends on the HW. I've HW that triggers it even when idle. Others may trigger it only e.g. when Ethernet ports aquire or loose the link or on ifconfig up / down. We've noticed this first from delays in frame rx/tx due to the mdelay(). Example command for checking if the issue is triggered: cyclictest -Smp1 (Look for occasional "Max:" values > 4000 or use -b 4000 to stop if greater) It was observed with I350 ports connected to other I350 ports, but not if driver and EEPROM was modified to run the I350 in EEPROM-less mode. phy_stats.idle_errors and .receive_errors (isn't touched) occupy 64 not used bits in the adapter struct: Their allocation may be removed as well. Cc: Carolyn Wyborny <carolyn.wyborny@intel.com> Cc: Todd Fujinaka <todd.fujinaka@intel.com> Fixes:12dcd86b75
("igb: fix stats handling") (this added the spin_lock) Signed-off-by: Bernhard Kaindl <bk-linux@use.startmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
569 lines
13 KiB
C
569 lines
13 KiB
C
/* Intel(R) Gigabit Ethernet Linux driver
|
|
* Copyright(c) 2007-2014 Intel Corporation.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program; if not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
* The full GNU General Public License is included in this distribution in
|
|
* the file called "COPYING".
|
|
*
|
|
* Contact Information:
|
|
* e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
|
|
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
*/
|
|
|
|
#ifndef _E1000_HW_H_
|
|
#define _E1000_HW_H_
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/netdevice.h>
|
|
|
|
#include "e1000_regs.h"
|
|
#include "e1000_defines.h"
|
|
|
|
struct e1000_hw;
|
|
|
|
#define E1000_DEV_ID_82576 0x10C9
|
|
#define E1000_DEV_ID_82576_FIBER 0x10E6
|
|
#define E1000_DEV_ID_82576_SERDES 0x10E7
|
|
#define E1000_DEV_ID_82576_QUAD_COPPER 0x10E8
|
|
#define E1000_DEV_ID_82576_QUAD_COPPER_ET2 0x1526
|
|
#define E1000_DEV_ID_82576_NS 0x150A
|
|
#define E1000_DEV_ID_82576_NS_SERDES 0x1518
|
|
#define E1000_DEV_ID_82576_SERDES_QUAD 0x150D
|
|
#define E1000_DEV_ID_82575EB_COPPER 0x10A7
|
|
#define E1000_DEV_ID_82575EB_FIBER_SERDES 0x10A9
|
|
#define E1000_DEV_ID_82575GB_QUAD_COPPER 0x10D6
|
|
#define E1000_DEV_ID_82580_COPPER 0x150E
|
|
#define E1000_DEV_ID_82580_FIBER 0x150F
|
|
#define E1000_DEV_ID_82580_SERDES 0x1510
|
|
#define E1000_DEV_ID_82580_SGMII 0x1511
|
|
#define E1000_DEV_ID_82580_COPPER_DUAL 0x1516
|
|
#define E1000_DEV_ID_82580_QUAD_FIBER 0x1527
|
|
#define E1000_DEV_ID_DH89XXCC_SGMII 0x0438
|
|
#define E1000_DEV_ID_DH89XXCC_SERDES 0x043A
|
|
#define E1000_DEV_ID_DH89XXCC_BACKPLANE 0x043C
|
|
#define E1000_DEV_ID_DH89XXCC_SFP 0x0440
|
|
#define E1000_DEV_ID_I350_COPPER 0x1521
|
|
#define E1000_DEV_ID_I350_FIBER 0x1522
|
|
#define E1000_DEV_ID_I350_SERDES 0x1523
|
|
#define E1000_DEV_ID_I350_SGMII 0x1524
|
|
#define E1000_DEV_ID_I210_COPPER 0x1533
|
|
#define E1000_DEV_ID_I210_FIBER 0x1536
|
|
#define E1000_DEV_ID_I210_SERDES 0x1537
|
|
#define E1000_DEV_ID_I210_SGMII 0x1538
|
|
#define E1000_DEV_ID_I210_COPPER_FLASHLESS 0x157B
|
|
#define E1000_DEV_ID_I210_SERDES_FLASHLESS 0x157C
|
|
#define E1000_DEV_ID_I211_COPPER 0x1539
|
|
#define E1000_DEV_ID_I354_BACKPLANE_1GBPS 0x1F40
|
|
#define E1000_DEV_ID_I354_SGMII 0x1F41
|
|
#define E1000_DEV_ID_I354_BACKPLANE_2_5GBPS 0x1F45
|
|
|
|
#define E1000_REVISION_2 2
|
|
#define E1000_REVISION_4 4
|
|
|
|
#define E1000_FUNC_0 0
|
|
#define E1000_FUNC_1 1
|
|
#define E1000_FUNC_2 2
|
|
#define E1000_FUNC_3 3
|
|
|
|
#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN0 0
|
|
#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN1 3
|
|
#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN2 6
|
|
#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN3 9
|
|
|
|
enum e1000_mac_type {
|
|
e1000_undefined = 0,
|
|
e1000_82575,
|
|
e1000_82576,
|
|
e1000_82580,
|
|
e1000_i350,
|
|
e1000_i354,
|
|
e1000_i210,
|
|
e1000_i211,
|
|
e1000_num_macs /* List is 1-based, so subtract 1 for true count. */
|
|
};
|
|
|
|
enum e1000_media_type {
|
|
e1000_media_type_unknown = 0,
|
|
e1000_media_type_copper = 1,
|
|
e1000_media_type_fiber = 2,
|
|
e1000_media_type_internal_serdes = 3,
|
|
e1000_num_media_types
|
|
};
|
|
|
|
enum e1000_nvm_type {
|
|
e1000_nvm_unknown = 0,
|
|
e1000_nvm_none,
|
|
e1000_nvm_eeprom_spi,
|
|
e1000_nvm_flash_hw,
|
|
e1000_nvm_invm,
|
|
e1000_nvm_flash_sw
|
|
};
|
|
|
|
enum e1000_nvm_override {
|
|
e1000_nvm_override_none = 0,
|
|
e1000_nvm_override_spi_small,
|
|
e1000_nvm_override_spi_large,
|
|
};
|
|
|
|
enum e1000_phy_type {
|
|
e1000_phy_unknown = 0,
|
|
e1000_phy_none,
|
|
e1000_phy_m88,
|
|
e1000_phy_igp,
|
|
e1000_phy_igp_2,
|
|
e1000_phy_gg82563,
|
|
e1000_phy_igp_3,
|
|
e1000_phy_ife,
|
|
e1000_phy_82580,
|
|
e1000_phy_i210,
|
|
};
|
|
|
|
enum e1000_bus_type {
|
|
e1000_bus_type_unknown = 0,
|
|
e1000_bus_type_pci,
|
|
e1000_bus_type_pcix,
|
|
e1000_bus_type_pci_express,
|
|
e1000_bus_type_reserved
|
|
};
|
|
|
|
enum e1000_bus_speed {
|
|
e1000_bus_speed_unknown = 0,
|
|
e1000_bus_speed_33,
|
|
e1000_bus_speed_66,
|
|
e1000_bus_speed_100,
|
|
e1000_bus_speed_120,
|
|
e1000_bus_speed_133,
|
|
e1000_bus_speed_2500,
|
|
e1000_bus_speed_5000,
|
|
e1000_bus_speed_reserved
|
|
};
|
|
|
|
enum e1000_bus_width {
|
|
e1000_bus_width_unknown = 0,
|
|
e1000_bus_width_pcie_x1,
|
|
e1000_bus_width_pcie_x2,
|
|
e1000_bus_width_pcie_x4 = 4,
|
|
e1000_bus_width_pcie_x8 = 8,
|
|
e1000_bus_width_32,
|
|
e1000_bus_width_64,
|
|
e1000_bus_width_reserved
|
|
};
|
|
|
|
enum e1000_1000t_rx_status {
|
|
e1000_1000t_rx_status_not_ok = 0,
|
|
e1000_1000t_rx_status_ok,
|
|
e1000_1000t_rx_status_undefined = 0xFF
|
|
};
|
|
|
|
enum e1000_rev_polarity {
|
|
e1000_rev_polarity_normal = 0,
|
|
e1000_rev_polarity_reversed,
|
|
e1000_rev_polarity_undefined = 0xFF
|
|
};
|
|
|
|
enum e1000_fc_mode {
|
|
e1000_fc_none = 0,
|
|
e1000_fc_rx_pause,
|
|
e1000_fc_tx_pause,
|
|
e1000_fc_full,
|
|
e1000_fc_default = 0xFF
|
|
};
|
|
|
|
/* Statistics counters collected by the MAC */
|
|
struct e1000_hw_stats {
|
|
u64 crcerrs;
|
|
u64 algnerrc;
|
|
u64 symerrs;
|
|
u64 rxerrc;
|
|
u64 mpc;
|
|
u64 scc;
|
|
u64 ecol;
|
|
u64 mcc;
|
|
u64 latecol;
|
|
u64 colc;
|
|
u64 dc;
|
|
u64 tncrs;
|
|
u64 sec;
|
|
u64 cexterr;
|
|
u64 rlec;
|
|
u64 xonrxc;
|
|
u64 xontxc;
|
|
u64 xoffrxc;
|
|
u64 xofftxc;
|
|
u64 fcruc;
|
|
u64 prc64;
|
|
u64 prc127;
|
|
u64 prc255;
|
|
u64 prc511;
|
|
u64 prc1023;
|
|
u64 prc1522;
|
|
u64 gprc;
|
|
u64 bprc;
|
|
u64 mprc;
|
|
u64 gptc;
|
|
u64 gorc;
|
|
u64 gotc;
|
|
u64 rnbc;
|
|
u64 ruc;
|
|
u64 rfc;
|
|
u64 roc;
|
|
u64 rjc;
|
|
u64 mgprc;
|
|
u64 mgpdc;
|
|
u64 mgptc;
|
|
u64 tor;
|
|
u64 tot;
|
|
u64 tpr;
|
|
u64 tpt;
|
|
u64 ptc64;
|
|
u64 ptc127;
|
|
u64 ptc255;
|
|
u64 ptc511;
|
|
u64 ptc1023;
|
|
u64 ptc1522;
|
|
u64 mptc;
|
|
u64 bptc;
|
|
u64 tsctc;
|
|
u64 tsctfc;
|
|
u64 iac;
|
|
u64 icrxptc;
|
|
u64 icrxatc;
|
|
u64 ictxptc;
|
|
u64 ictxatc;
|
|
u64 ictxqec;
|
|
u64 ictxqmtc;
|
|
u64 icrxdmtc;
|
|
u64 icrxoc;
|
|
u64 cbtmpc;
|
|
u64 htdpmc;
|
|
u64 cbrdpc;
|
|
u64 cbrmpc;
|
|
u64 rpthc;
|
|
u64 hgptc;
|
|
u64 htcbdpc;
|
|
u64 hgorc;
|
|
u64 hgotc;
|
|
u64 lenerrs;
|
|
u64 scvpc;
|
|
u64 hrmpc;
|
|
u64 doosync;
|
|
u64 o2bgptc;
|
|
u64 o2bspc;
|
|
u64 b2ospc;
|
|
u64 b2ogprc;
|
|
};
|
|
|
|
struct e1000_host_mng_dhcp_cookie {
|
|
u32 signature;
|
|
u8 status;
|
|
u8 reserved0;
|
|
u16 vlan_id;
|
|
u32 reserved1;
|
|
u16 reserved2;
|
|
u8 reserved3;
|
|
u8 checksum;
|
|
};
|
|
|
|
/* Host Interface "Rev 1" */
|
|
struct e1000_host_command_header {
|
|
u8 command_id;
|
|
u8 command_length;
|
|
u8 command_options;
|
|
u8 checksum;
|
|
};
|
|
|
|
#define E1000_HI_MAX_DATA_LENGTH 252
|
|
struct e1000_host_command_info {
|
|
struct e1000_host_command_header command_header;
|
|
u8 command_data[E1000_HI_MAX_DATA_LENGTH];
|
|
};
|
|
|
|
/* Host Interface "Rev 2" */
|
|
struct e1000_host_mng_command_header {
|
|
u8 command_id;
|
|
u8 checksum;
|
|
u16 reserved1;
|
|
u16 reserved2;
|
|
u16 command_length;
|
|
};
|
|
|
|
#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8
|
|
struct e1000_host_mng_command_info {
|
|
struct e1000_host_mng_command_header command_header;
|
|
u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH];
|
|
};
|
|
|
|
#include "e1000_mac.h"
|
|
#include "e1000_phy.h"
|
|
#include "e1000_nvm.h"
|
|
#include "e1000_mbx.h"
|
|
|
|
struct e1000_mac_operations {
|
|
s32 (*check_for_link)(struct e1000_hw *);
|
|
s32 (*reset_hw)(struct e1000_hw *);
|
|
s32 (*init_hw)(struct e1000_hw *);
|
|
bool (*check_mng_mode)(struct e1000_hw *);
|
|
s32 (*setup_physical_interface)(struct e1000_hw *);
|
|
void (*rar_set)(struct e1000_hw *, u8 *, u32);
|
|
s32 (*read_mac_addr)(struct e1000_hw *);
|
|
s32 (*get_speed_and_duplex)(struct e1000_hw *, u16 *, u16 *);
|
|
s32 (*acquire_swfw_sync)(struct e1000_hw *, u16);
|
|
void (*release_swfw_sync)(struct e1000_hw *, u16);
|
|
#ifdef CONFIG_IGB_HWMON
|
|
s32 (*get_thermal_sensor_data)(struct e1000_hw *);
|
|
s32 (*init_thermal_sensor_thresh)(struct e1000_hw *);
|
|
#endif
|
|
|
|
};
|
|
|
|
struct e1000_phy_operations {
|
|
s32 (*acquire)(struct e1000_hw *);
|
|
s32 (*check_polarity)(struct e1000_hw *);
|
|
s32 (*check_reset_block)(struct e1000_hw *);
|
|
s32 (*force_speed_duplex)(struct e1000_hw *);
|
|
s32 (*get_cfg_done)(struct e1000_hw *hw);
|
|
s32 (*get_cable_length)(struct e1000_hw *);
|
|
s32 (*get_phy_info)(struct e1000_hw *);
|
|
s32 (*read_reg)(struct e1000_hw *, u32, u16 *);
|
|
void (*release)(struct e1000_hw *);
|
|
s32 (*reset)(struct e1000_hw *);
|
|
s32 (*set_d0_lplu_state)(struct e1000_hw *, bool);
|
|
s32 (*set_d3_lplu_state)(struct e1000_hw *, bool);
|
|
s32 (*write_reg)(struct e1000_hw *, u32, u16);
|
|
s32 (*read_i2c_byte)(struct e1000_hw *, u8, u8, u8 *);
|
|
s32 (*write_i2c_byte)(struct e1000_hw *, u8, u8, u8);
|
|
};
|
|
|
|
struct e1000_nvm_operations {
|
|
s32 (*acquire)(struct e1000_hw *);
|
|
s32 (*read)(struct e1000_hw *, u16, u16, u16 *);
|
|
void (*release)(struct e1000_hw *);
|
|
s32 (*write)(struct e1000_hw *, u16, u16, u16 *);
|
|
s32 (*update)(struct e1000_hw *);
|
|
s32 (*validate)(struct e1000_hw *);
|
|
s32 (*valid_led_default)(struct e1000_hw *, u16 *);
|
|
};
|
|
|
|
#define E1000_MAX_SENSORS 3
|
|
|
|
struct e1000_thermal_diode_data {
|
|
u8 location;
|
|
u8 temp;
|
|
u8 caution_thresh;
|
|
u8 max_op_thresh;
|
|
};
|
|
|
|
struct e1000_thermal_sensor_data {
|
|
struct e1000_thermal_diode_data sensor[E1000_MAX_SENSORS];
|
|
};
|
|
|
|
struct e1000_info {
|
|
s32 (*get_invariants)(struct e1000_hw *);
|
|
struct e1000_mac_operations *mac_ops;
|
|
struct e1000_phy_operations *phy_ops;
|
|
struct e1000_nvm_operations *nvm_ops;
|
|
};
|
|
|
|
extern const struct e1000_info e1000_82575_info;
|
|
|
|
struct e1000_mac_info {
|
|
struct e1000_mac_operations ops;
|
|
|
|
u8 addr[6];
|
|
u8 perm_addr[6];
|
|
|
|
enum e1000_mac_type type;
|
|
|
|
u32 ledctl_default;
|
|
u32 ledctl_mode1;
|
|
u32 ledctl_mode2;
|
|
u32 mc_filter_type;
|
|
u32 txcw;
|
|
|
|
u16 mta_reg_count;
|
|
u16 uta_reg_count;
|
|
|
|
/* Maximum size of the MTA register table in all supported adapters */
|
|
#define MAX_MTA_REG 128
|
|
u32 mta_shadow[MAX_MTA_REG];
|
|
u16 rar_entry_count;
|
|
|
|
u8 forced_speed_duplex;
|
|
|
|
bool adaptive_ifs;
|
|
bool arc_subsystem_valid;
|
|
bool asf_firmware_present;
|
|
bool autoneg;
|
|
bool autoneg_failed;
|
|
bool disable_hw_init_bits;
|
|
bool get_link_status;
|
|
bool ifs_params_forced;
|
|
bool in_ifs_mode;
|
|
bool report_tx_early;
|
|
bool serdes_has_link;
|
|
bool tx_pkt_filtering;
|
|
struct e1000_thermal_sensor_data thermal_sensor_data;
|
|
};
|
|
|
|
struct e1000_phy_info {
|
|
struct e1000_phy_operations ops;
|
|
|
|
enum e1000_phy_type type;
|
|
|
|
enum e1000_1000t_rx_status local_rx;
|
|
enum e1000_1000t_rx_status remote_rx;
|
|
enum e1000_ms_type ms_type;
|
|
enum e1000_ms_type original_ms_type;
|
|
enum e1000_rev_polarity cable_polarity;
|
|
enum e1000_smart_speed smart_speed;
|
|
|
|
u32 addr;
|
|
u32 id;
|
|
u32 reset_delay_us; /* in usec */
|
|
u32 revision;
|
|
|
|
enum e1000_media_type media_type;
|
|
|
|
u16 autoneg_advertised;
|
|
u16 autoneg_mask;
|
|
u16 cable_length;
|
|
u16 max_cable_length;
|
|
u16 min_cable_length;
|
|
|
|
u8 mdix;
|
|
|
|
bool disable_polarity_correction;
|
|
bool is_mdix;
|
|
bool polarity_correction;
|
|
bool reset_disable;
|
|
bool speed_downgraded;
|
|
bool autoneg_wait_to_complete;
|
|
};
|
|
|
|
struct e1000_nvm_info {
|
|
struct e1000_nvm_operations ops;
|
|
enum e1000_nvm_type type;
|
|
enum e1000_nvm_override override;
|
|
|
|
u32 flash_bank_size;
|
|
u32 flash_base_addr;
|
|
|
|
u16 word_size;
|
|
u16 delay_usec;
|
|
u16 address_bits;
|
|
u16 opcode_bits;
|
|
u16 page_size;
|
|
};
|
|
|
|
struct e1000_bus_info {
|
|
enum e1000_bus_type type;
|
|
enum e1000_bus_speed speed;
|
|
enum e1000_bus_width width;
|
|
|
|
u32 snoop;
|
|
|
|
u16 func;
|
|
u16 pci_cmd_word;
|
|
};
|
|
|
|
struct e1000_fc_info {
|
|
u32 high_water; /* Flow control high-water mark */
|
|
u32 low_water; /* Flow control low-water mark */
|
|
u16 pause_time; /* Flow control pause timer */
|
|
bool send_xon; /* Flow control send XON */
|
|
bool strict_ieee; /* Strict IEEE mode */
|
|
enum e1000_fc_mode current_mode; /* Type of flow control */
|
|
enum e1000_fc_mode requested_mode;
|
|
};
|
|
|
|
struct e1000_mbx_operations {
|
|
s32 (*init_params)(struct e1000_hw *hw);
|
|
s32 (*read)(struct e1000_hw *, u32 *, u16, u16);
|
|
s32 (*write)(struct e1000_hw *, u32 *, u16, u16);
|
|
s32 (*read_posted)(struct e1000_hw *, u32 *, u16, u16);
|
|
s32 (*write_posted)(struct e1000_hw *, u32 *, u16, u16);
|
|
s32 (*check_for_msg)(struct e1000_hw *, u16);
|
|
s32 (*check_for_ack)(struct e1000_hw *, u16);
|
|
s32 (*check_for_rst)(struct e1000_hw *, u16);
|
|
};
|
|
|
|
struct e1000_mbx_stats {
|
|
u32 msgs_tx;
|
|
u32 msgs_rx;
|
|
|
|
u32 acks;
|
|
u32 reqs;
|
|
u32 rsts;
|
|
};
|
|
|
|
struct e1000_mbx_info {
|
|
struct e1000_mbx_operations ops;
|
|
struct e1000_mbx_stats stats;
|
|
u32 timeout;
|
|
u32 usec_delay;
|
|
u16 size;
|
|
};
|
|
|
|
struct e1000_dev_spec_82575 {
|
|
bool sgmii_active;
|
|
bool global_device_reset;
|
|
bool eee_disable;
|
|
bool clear_semaphore_once;
|
|
struct e1000_sfp_flags eth_flags;
|
|
bool module_plugged;
|
|
u8 media_port;
|
|
bool media_changed;
|
|
bool mas_capable;
|
|
};
|
|
|
|
struct e1000_hw {
|
|
void *back;
|
|
|
|
u8 __iomem *hw_addr;
|
|
u8 __iomem *flash_address;
|
|
unsigned long io_base;
|
|
|
|
struct e1000_mac_info mac;
|
|
struct e1000_fc_info fc;
|
|
struct e1000_phy_info phy;
|
|
struct e1000_nvm_info nvm;
|
|
struct e1000_bus_info bus;
|
|
struct e1000_mbx_info mbx;
|
|
struct e1000_host_mng_dhcp_cookie mng_cookie;
|
|
|
|
union {
|
|
struct e1000_dev_spec_82575 _82575;
|
|
} dev_spec;
|
|
|
|
u16 device_id;
|
|
u16 subsystem_vendor_id;
|
|
u16 subsystem_device_id;
|
|
u16 vendor_id;
|
|
|
|
u8 revision_id;
|
|
};
|
|
|
|
struct net_device *igb_get_hw_dev(struct e1000_hw *hw);
|
|
#define hw_dbg(format, arg...) \
|
|
netdev_dbg(igb_get_hw_dev(hw), format, ##arg)
|
|
|
|
/* These functions must be implemented by drivers */
|
|
s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
|
|
s32 igb_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
|
|
|
|
void igb_read_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value);
|
|
void igb_write_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value);
|
|
#endif /* _E1000_HW_H_ */
|