linux/drivers/usb
Alan Stern 0b84704a2d USB: serial-generic: use a single set of device IDs
The usb-serial-generic driver uses different device IDs for its USB
matching and its serial matching.  This can lead to problems: The
driver can end up getting bound to a USB interface without being
allowed to bind to the corresponding serial port.

This patch (as1557) fixes the problem by using the same device ID
table (the one that can be altered by the "vendor=" and "product="
module parameters) for both purposes.  The unused table is removed.
Now the driver will bind only to the intended devices.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13 14:01:56 -07:00
..
atm USB: xusbatm.c: remove dbg() usage 2012-05-01 21:33:30 -07:00
c67x00
chipidea usb: chipidea: remove zero check of hw_ep_max 2012-05-15 08:43:40 -07:00
class USB: cdc-wdm: Add Vodafone/Huawei K5005 support 2012-06-12 16:05:43 -07:00
core USB: add NO_D3_DURING_SLEEP flag and revert 151b612847 2012-06-13 13:11:39 -07:00
dwc3 usb: dwc3: Fix the dwc3 dependency 2012-05-11 15:17:31 -07:00
early
gadget usb: gadget: regression fix - usage of usb_ep 2012-06-04 18:24:49 +03:00
host USB: add NO_D3_DURING_SLEEP flag and revert 151b612847 2012-06-13 13:11:39 -07:00
image USB: mdc800.c: remove dbg() usage 2012-05-01 21:33:50 -07:00
misc USB: yurex.c: remove dbg() usage 2012-05-01 21:34:11 -07:00
mon
musb usb: musb_gadget: fix crash caused by dangling pointer 2012-06-04 18:30:20 +03:00
otg USB: gpio_vbus: wakeup support on GPIO VBUS interrupts 2012-05-17 11:20:34 -07:00
phy USB: Add driver for NXP ISP1301 USB transceiver 2012-05-01 13:33:02 -04:00
renesas_usbhs usb: renesas_usbhs: gadget: add support for set_selfpowered 2012-05-04 15:53:05 +03:00
serial USB: serial-generic: use a single set of device IDs 2012-06-13 14:01:56 -07:00
storage Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial 2012-05-22 19:22:50 -07:00
wusbcore
Kconfig usb: move ci13xxx and related code to drivers/usb/chipidea 2012-05-11 16:45:30 -07:00
Makefile usb: move ci13xxx and related code to drivers/usb/chipidea 2012-05-11 16:45:30 -07:00
README
usb-common.c
usb-skeleton.c USB: usb-skeleton.c: remove err() usage 2012-04-27 11:24:45 -07:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.