forked from Minki/linux
4898c2b2f0
Up until now, we polled the rfkill status for every incoming FUJ02E3 ACPI event. It turns out that the firmware has a bitmask which indicates what rfkill-related state it can report. The rfkill_supported bitmask is now used to avoid polling for rfkill at all in the notification handler if there is no support. Also, it is used in the platform device callbacks. As before we register all callbacks and report "unknown" if the firmware does not give us status updates for that particular bit. This was fed through checkpatch.pl and tested on the S6420, S7020 and P8010 platforms. Signed-off-by: Tony Vroon <tony@linx.net> Tested-by: Stephen Gildea <stepheng+linux@gildea.com> Acked-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au> Signed-off-by: Len Brown <len.brown@intel.com>
1305 lines
33 KiB
C
1305 lines
33 KiB
C
/*-*-linux-c-*-*/
|
|
|
|
/*
|
|
Copyright (C) 2007,2008 Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
|
|
Copyright (C) 2008 Peter Gruber <nokos@gmx.net>
|
|
Copyright (C) 2008 Tony Vroon <tony@linx.net>
|
|
Based on earlier work:
|
|
Copyright (C) 2003 Shane Spencer <shane@bogomip.com>
|
|
Adrian Yee <brewt-fujitsu@brewt.org>
|
|
|
|
Templated from msi-laptop.c and thinkpad_acpi.c which is copyright
|
|
by its respective authors.
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful, but
|
|
WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
|
|
02110-1301, USA.
|
|
*/
|
|
|
|
/*
|
|
* fujitsu-laptop.c - Fujitsu laptop support, providing access to additional
|
|
* features made available on a range of Fujitsu laptops including the
|
|
* P2xxx/P5xxx/S6xxx/S7xxx series.
|
|
*
|
|
* This driver exports a few files in /sys/devices/platform/fujitsu-laptop/;
|
|
* others may be added at a later date.
|
|
*
|
|
* lcd_level - Screen brightness: contains a single integer in the
|
|
* range 0..7. (rw)
|
|
*
|
|
* In addition to these platform device attributes the driver
|
|
* registers itself in the Linux backlight control subsystem and is
|
|
* available to userspace under /sys/class/backlight/fujitsu-laptop/.
|
|
*
|
|
* Hotkeys present on certain Fujitsu laptops (eg: the S6xxx series) are
|
|
* also supported by this driver.
|
|
*
|
|
* This driver has been tested on a Fujitsu Lifebook S6410, S7020 and
|
|
* P8010. It should work on most P-series and S-series Lifebooks, but
|
|
* YMMV.
|
|
*
|
|
* The module parameter use_alt_lcd_levels switches between different ACPI
|
|
* brightness controls which are used by different Fujitsu laptops. In most
|
|
* cases the correct method is automatically detected. "use_alt_lcd_levels=1"
|
|
* is applicable for a Fujitsu Lifebook S6410 if autodetection fails.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/dmi.h>
|
|
#include <linux/backlight.h>
|
|
#include <linux/input.h>
|
|
#include <linux/kfifo.h>
|
|
#include <linux/video_output.h>
|
|
#include <linux/platform_device.h>
|
|
#ifdef CONFIG_LEDS_CLASS
|
|
#include <linux/leds.h>
|
|
#endif
|
|
|
|
#define FUJITSU_DRIVER_VERSION "0.5.0"
|
|
|
|
#define FUJITSU_LCD_N_LEVELS 8
|
|
|
|
#define ACPI_FUJITSU_CLASS "fujitsu"
|
|
#define ACPI_FUJITSU_HID "FUJ02B1"
|
|
#define ACPI_FUJITSU_DRIVER_NAME "Fujitsu laptop FUJ02B1 ACPI brightness driver"
|
|
#define ACPI_FUJITSU_DEVICE_NAME "Fujitsu FUJ02B1"
|
|
#define ACPI_FUJITSU_HOTKEY_HID "FUJ02E3"
|
|
#define ACPI_FUJITSU_HOTKEY_DRIVER_NAME "Fujitsu laptop FUJ02E3 ACPI hotkeys driver"
|
|
#define ACPI_FUJITSU_HOTKEY_DEVICE_NAME "Fujitsu FUJ02E3"
|
|
|
|
#define ACPI_FUJITSU_NOTIFY_CODE1 0x80
|
|
|
|
#define ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS 0x86
|
|
#define ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS 0x87
|
|
|
|
/* FUNC interface - command values */
|
|
#define FUNC_RFKILL 0x1000
|
|
#define FUNC_LEDS 0x1001
|
|
#define FUNC_BUTTONS 0x1002
|
|
#define FUNC_BACKLIGHT 0x1004
|
|
|
|
/* FUNC interface - responses */
|
|
#define UNSUPPORTED_CMD 0x80000000
|
|
|
|
#ifdef CONFIG_LEDS_CLASS
|
|
/* FUNC interface - LED control */
|
|
#define FUNC_LED_OFF 0x1
|
|
#define FUNC_LED_ON 0x30001
|
|
#define KEYBOARD_LAMPS 0x100
|
|
#define LOGOLAMP_POWERON 0x2000
|
|
#define LOGOLAMP_ALWAYS 0x4000
|
|
#endif
|
|
|
|
/* Hotkey details */
|
|
#define KEY1_CODE 0x410 /* codes for the keys in the GIRB register */
|
|
#define KEY2_CODE 0x411
|
|
#define KEY3_CODE 0x412
|
|
#define KEY4_CODE 0x413
|
|
|
|
#define MAX_HOTKEY_RINGBUFFER_SIZE 100
|
|
#define RINGBUFFERSIZE 40
|
|
|
|
/* Debugging */
|
|
#define FUJLAPTOP_LOG ACPI_FUJITSU_HID ": "
|
|
#define FUJLAPTOP_ERR KERN_ERR FUJLAPTOP_LOG
|
|
#define FUJLAPTOP_NOTICE KERN_NOTICE FUJLAPTOP_LOG
|
|
#define FUJLAPTOP_INFO KERN_INFO FUJLAPTOP_LOG
|
|
#define FUJLAPTOP_DEBUG KERN_DEBUG FUJLAPTOP_LOG
|
|
|
|
#define FUJLAPTOP_DBG_ALL 0xffff
|
|
#define FUJLAPTOP_DBG_ERROR 0x0001
|
|
#define FUJLAPTOP_DBG_WARN 0x0002
|
|
#define FUJLAPTOP_DBG_INFO 0x0004
|
|
#define FUJLAPTOP_DBG_TRACE 0x0008
|
|
|
|
#define dbg_printk(a_dbg_level, format, arg...) \
|
|
do { if (dbg_level & a_dbg_level) \
|
|
printk(FUJLAPTOP_DEBUG "%s: " format, __func__ , ## arg); \
|
|
} while (0)
|
|
#ifdef CONFIG_FUJITSU_LAPTOP_DEBUG
|
|
#define vdbg_printk(a_dbg_level, format, arg...) \
|
|
dbg_printk(a_dbg_level, format, ## arg)
|
|
#else
|
|
#define vdbg_printk(a_dbg_level, format, arg...)
|
|
#endif
|
|
|
|
/* Device controlling the backlight and associated keys */
|
|
struct fujitsu_t {
|
|
acpi_handle acpi_handle;
|
|
struct acpi_device *dev;
|
|
struct input_dev *input;
|
|
char phys[32];
|
|
struct backlight_device *bl_device;
|
|
struct platform_device *pf_device;
|
|
int keycode1, keycode2, keycode3, keycode4;
|
|
|
|
unsigned int max_brightness;
|
|
unsigned int brightness_changed;
|
|
unsigned int brightness_level;
|
|
};
|
|
|
|
static struct fujitsu_t *fujitsu;
|
|
static int use_alt_lcd_levels = -1;
|
|
static int disable_brightness_adjust = -1;
|
|
|
|
/* Device used to access other hotkeys on the laptop */
|
|
struct fujitsu_hotkey_t {
|
|
acpi_handle acpi_handle;
|
|
struct acpi_device *dev;
|
|
struct input_dev *input;
|
|
char phys[32];
|
|
struct platform_device *pf_device;
|
|
struct kfifo *fifo;
|
|
spinlock_t fifo_lock;
|
|
int rfkill_supported;
|
|
int rfkill_state;
|
|
int logolamp_registered;
|
|
int kblamps_registered;
|
|
};
|
|
|
|
static struct fujitsu_hotkey_t *fujitsu_hotkey;
|
|
|
|
static void acpi_fujitsu_hotkey_notify(acpi_handle handle, u32 event,
|
|
void *data);
|
|
|
|
#ifdef CONFIG_LEDS_CLASS
|
|
static enum led_brightness logolamp_get(struct led_classdev *cdev);
|
|
static void logolamp_set(struct led_classdev *cdev,
|
|
enum led_brightness brightness);
|
|
|
|
struct led_classdev logolamp_led = {
|
|
.name = "fujitsu::logolamp",
|
|
.brightness_get = logolamp_get,
|
|
.brightness_set = logolamp_set
|
|
};
|
|
|
|
static enum led_brightness kblamps_get(struct led_classdev *cdev);
|
|
static void kblamps_set(struct led_classdev *cdev,
|
|
enum led_brightness brightness);
|
|
|
|
struct led_classdev kblamps_led = {
|
|
.name = "fujitsu::kblamps",
|
|
.brightness_get = kblamps_get,
|
|
.brightness_set = kblamps_set
|
|
};
|
|
#endif
|
|
|
|
#ifdef CONFIG_FUJITSU_LAPTOP_DEBUG
|
|
static u32 dbg_level = 0x03;
|
|
#endif
|
|
|
|
static void acpi_fujitsu_notify(acpi_handle handle, u32 event, void *data);
|
|
|
|
/* Fujitsu ACPI interface function */
|
|
|
|
static int call_fext_func(int cmd, int arg0, int arg1, int arg2)
|
|
{
|
|
acpi_status status = AE_OK;
|
|
union acpi_object params[4] = {
|
|
{ .type = ACPI_TYPE_INTEGER },
|
|
{ .type = ACPI_TYPE_INTEGER },
|
|
{ .type = ACPI_TYPE_INTEGER },
|
|
{ .type = ACPI_TYPE_INTEGER }
|
|
};
|
|
struct acpi_object_list arg_list = { 4, ¶ms[0] };
|
|
struct acpi_buffer output;
|
|
union acpi_object out_obj;
|
|
acpi_handle handle = NULL;
|
|
|
|
status = acpi_get_handle(fujitsu_hotkey->acpi_handle, "FUNC", &handle);
|
|
if (ACPI_FAILURE(status)) {
|
|
vdbg_printk(FUJLAPTOP_DBG_ERROR,
|
|
"FUNC interface is not present\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
params[0].integer.value = cmd;
|
|
params[1].integer.value = arg0;
|
|
params[2].integer.value = arg1;
|
|
params[3].integer.value = arg2;
|
|
|
|
output.length = sizeof(out_obj);
|
|
output.pointer = &out_obj;
|
|
|
|
status = acpi_evaluate_object(handle, NULL, &arg_list, &output);
|
|
if (ACPI_FAILURE(status)) {
|
|
vdbg_printk(FUJLAPTOP_DBG_WARN,
|
|
"FUNC 0x%x (args 0x%x, 0x%x, 0x%x) call failed\n",
|
|
cmd, arg0, arg1, arg2);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (out_obj.type != ACPI_TYPE_INTEGER) {
|
|
vdbg_printk(FUJLAPTOP_DBG_WARN,
|
|
"FUNC 0x%x (args 0x%x, 0x%x, 0x%x) did not "
|
|
"return an integer\n",
|
|
cmd, arg0, arg1, arg2);
|
|
return -ENODEV;
|
|
}
|
|
|
|
vdbg_printk(FUJLAPTOP_DBG_TRACE,
|
|
"FUNC 0x%x (args 0x%x, 0x%x, 0x%x) returned 0x%x\n",
|
|
cmd, arg0, arg1, arg2, (int)out_obj.integer.value);
|
|
return out_obj.integer.value;
|
|
}
|
|
|
|
#ifdef CONFIG_LEDS_CLASS
|
|
/* LED class callbacks */
|
|
|
|
static void logolamp_set(struct led_classdev *cdev,
|
|
enum led_brightness brightness)
|
|
{
|
|
if (brightness >= LED_FULL) {
|
|
call_fext_func(FUNC_LEDS, 0x1, LOGOLAMP_POWERON, FUNC_LED_ON);
|
|
call_fext_func(FUNC_LEDS, 0x1, LOGOLAMP_ALWAYS, FUNC_LED_ON);
|
|
} else if (brightness >= LED_HALF) {
|
|
call_fext_func(FUNC_LEDS, 0x1, LOGOLAMP_POWERON, FUNC_LED_ON);
|
|
call_fext_func(FUNC_LEDS, 0x1, LOGOLAMP_ALWAYS, FUNC_LED_OFF);
|
|
} else {
|
|
call_fext_func(FUNC_LEDS, 0x1, LOGOLAMP_POWERON, FUNC_LED_OFF);
|
|
}
|
|
}
|
|
|
|
static void kblamps_set(struct led_classdev *cdev,
|
|
enum led_brightness brightness)
|
|
{
|
|
if (brightness >= LED_FULL)
|
|
call_fext_func(FUNC_LEDS, 0x1, KEYBOARD_LAMPS, FUNC_LED_ON);
|
|
else
|
|
call_fext_func(FUNC_LEDS, 0x1, KEYBOARD_LAMPS, FUNC_LED_OFF);
|
|
}
|
|
|
|
static enum led_brightness logolamp_get(struct led_classdev *cdev)
|
|
{
|
|
enum led_brightness brightness = LED_OFF;
|
|
int poweron, always;
|
|
|
|
poweron = call_fext_func(FUNC_LEDS, 0x2, LOGOLAMP_POWERON, 0x0);
|
|
if (poweron == FUNC_LED_ON) {
|
|
brightness = LED_HALF;
|
|
always = call_fext_func(FUNC_LEDS, 0x2, LOGOLAMP_ALWAYS, 0x0);
|
|
if (always == FUNC_LED_ON)
|
|
brightness = LED_FULL;
|
|
}
|
|
return brightness;
|
|
}
|
|
|
|
static enum led_brightness kblamps_get(struct led_classdev *cdev)
|
|
{
|
|
enum led_brightness brightness = LED_OFF;
|
|
|
|
if (call_fext_func(FUNC_LEDS, 0x2, KEYBOARD_LAMPS, 0x0) == FUNC_LED_ON)
|
|
brightness = LED_FULL;
|
|
|
|
return brightness;
|
|
}
|
|
#endif
|
|
|
|
/* Hardware access for LCD brightness control */
|
|
|
|
static int set_lcd_level(int level)
|
|
{
|
|
acpi_status status = AE_OK;
|
|
union acpi_object arg0 = { ACPI_TYPE_INTEGER };
|
|
struct acpi_object_list arg_list = { 1, &arg0 };
|
|
acpi_handle handle = NULL;
|
|
|
|
vdbg_printk(FUJLAPTOP_DBG_TRACE, "set lcd level via SBLL [%d]\n",
|
|
level);
|
|
|
|
if (level < 0 || level >= fujitsu->max_brightness)
|
|
return -EINVAL;
|
|
|
|
if (!fujitsu)
|
|
return -EINVAL;
|
|
|
|
status = acpi_get_handle(fujitsu->acpi_handle, "SBLL", &handle);
|
|
if (ACPI_FAILURE(status)) {
|
|
vdbg_printk(FUJLAPTOP_DBG_ERROR, "SBLL not present\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
arg0.integer.value = level;
|
|
|
|
status = acpi_evaluate_object(handle, NULL, &arg_list, NULL);
|
|
if (ACPI_FAILURE(status))
|
|
return -ENODEV;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int set_lcd_level_alt(int level)
|
|
{
|
|
acpi_status status = AE_OK;
|
|
union acpi_object arg0 = { ACPI_TYPE_INTEGER };
|
|
struct acpi_object_list arg_list = { 1, &arg0 };
|
|
acpi_handle handle = NULL;
|
|
|
|
vdbg_printk(FUJLAPTOP_DBG_TRACE, "set lcd level via SBL2 [%d]\n",
|
|
level);
|
|
|
|
if (level < 0 || level >= fujitsu->max_brightness)
|
|
return -EINVAL;
|
|
|
|
if (!fujitsu)
|
|
return -EINVAL;
|
|
|
|
status = acpi_get_handle(fujitsu->acpi_handle, "SBL2", &handle);
|
|
if (ACPI_FAILURE(status)) {
|
|
vdbg_printk(FUJLAPTOP_DBG_ERROR, "SBL2 not present\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
arg0.integer.value = level;
|
|
|
|
status = acpi_evaluate_object(handle, NULL, &arg_list, NULL);
|
|
if (ACPI_FAILURE(status))
|
|
return -ENODEV;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int get_lcd_level(void)
|
|
{
|
|
unsigned long long state = 0;
|
|
acpi_status status = AE_OK;
|
|
|
|
vdbg_printk(FUJLAPTOP_DBG_TRACE, "get lcd level via GBLL\n");
|
|
|
|
status =
|
|
acpi_evaluate_integer(fujitsu->acpi_handle, "GBLL", NULL, &state);
|
|
if (status < 0)
|
|
return status;
|
|
|
|
fujitsu->brightness_level = state & 0x0fffffff;
|
|
|
|
if (state & 0x80000000)
|
|
fujitsu->brightness_changed = 1;
|
|
else
|
|
fujitsu->brightness_changed = 0;
|
|
|
|
return fujitsu->brightness_level;
|
|
}
|
|
|
|
static int get_max_brightness(void)
|
|
{
|
|
unsigned long long state = 0;
|
|
acpi_status status = AE_OK;
|
|
|
|
vdbg_printk(FUJLAPTOP_DBG_TRACE, "get max lcd level via RBLL\n");
|
|
|
|
status =
|
|
acpi_evaluate_integer(fujitsu->acpi_handle, "RBLL", NULL, &state);
|
|
if (status < 0)
|
|
return status;
|
|
|
|
fujitsu->max_brightness = state;
|
|
|
|
return fujitsu->max_brightness;
|
|
}
|
|
|
|
/* Backlight device stuff */
|
|
|
|
static int bl_get_brightness(struct backlight_device *b)
|
|
{
|
|
return get_lcd_level();
|
|
}
|
|
|
|
static int bl_update_status(struct backlight_device *b)
|
|
{
|
|
int ret;
|
|
if (b->props.power == 4)
|
|
ret = call_fext_func(FUNC_BACKLIGHT, 0x1, 0x4, 0x3);
|
|
else
|
|
ret = call_fext_func(FUNC_BACKLIGHT, 0x1, 0x4, 0x0);
|
|
if (ret != 0)
|
|
vdbg_printk(FUJLAPTOP_DBG_ERROR,
|
|
"Unable to adjust backlight power, error code %i\n",
|
|
ret);
|
|
|
|
if (use_alt_lcd_levels)
|
|
ret = set_lcd_level_alt(b->props.brightness);
|
|
else
|
|
ret = set_lcd_level(b->props.brightness);
|
|
if (ret != 0)
|
|
vdbg_printk(FUJLAPTOP_DBG_ERROR,
|
|
"Unable to adjust LCD brightness, error code %i\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
static struct backlight_ops fujitsubl_ops = {
|
|
.get_brightness = bl_get_brightness,
|
|
.update_status = bl_update_status,
|
|
};
|
|
|
|
/* Platform LCD brightness device */
|
|
|
|
static ssize_t
|
|
show_max_brightness(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
|
|
int ret;
|
|
|
|
ret = get_max_brightness();
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return sprintf(buf, "%i\n", ret);
|
|
}
|
|
|
|
static ssize_t
|
|
show_brightness_changed(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
|
|
int ret;
|
|
|
|
ret = fujitsu->brightness_changed;
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return sprintf(buf, "%i\n", ret);
|
|
}
|
|
|
|
static ssize_t show_lcd_level(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
|
|
int ret;
|
|
|
|
ret = get_lcd_level();
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return sprintf(buf, "%i\n", ret);
|
|
}
|
|
|
|
static ssize_t store_lcd_level(struct device *dev,
|
|
struct device_attribute *attr, const char *buf,
|
|
size_t count)
|
|
{
|
|
|
|
int level, ret;
|
|
|
|
if (sscanf(buf, "%i", &level) != 1
|
|
|| (level < 0 || level >= fujitsu->max_brightness))
|
|
return -EINVAL;
|
|
|
|
if (use_alt_lcd_levels)
|
|
ret = set_lcd_level_alt(level);
|
|
else
|
|
ret = set_lcd_level(level);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = get_lcd_level();
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t
|
|
ignore_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf, size_t count)
|
|
{
|
|
return count;
|
|
}
|
|
|
|
static ssize_t
|
|
show_lid_state(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
if (!(fujitsu_hotkey->rfkill_supported & 0x100))
|
|
return sprintf(buf, "unknown\n");
|
|
if (fujitsu_hotkey->rfkill_state & 0x100)
|
|
return sprintf(buf, "open\n");
|
|
else
|
|
return sprintf(buf, "closed\n");
|
|
}
|
|
|
|
static ssize_t
|
|
show_dock_state(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
if (!(fujitsu_hotkey->rfkill_supported & 0x200))
|
|
return sprintf(buf, "unknown\n");
|
|
if (fujitsu_hotkey->rfkill_state & 0x200)
|
|
return sprintf(buf, "docked\n");
|
|
else
|
|
return sprintf(buf, "undocked\n");
|
|
}
|
|
|
|
static ssize_t
|
|
show_radios_state(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
if (!(fujitsu_hotkey->rfkill_supported & 0x20))
|
|
return sprintf(buf, "unknown\n");
|
|
if (fujitsu_hotkey->rfkill_state & 0x20)
|
|
return sprintf(buf, "on\n");
|
|
else
|
|
return sprintf(buf, "killed\n");
|
|
}
|
|
|
|
static DEVICE_ATTR(max_brightness, 0444, show_max_brightness, ignore_store);
|
|
static DEVICE_ATTR(brightness_changed, 0444, show_brightness_changed,
|
|
ignore_store);
|
|
static DEVICE_ATTR(lcd_level, 0644, show_lcd_level, store_lcd_level);
|
|
static DEVICE_ATTR(lid, 0444, show_lid_state, ignore_store);
|
|
static DEVICE_ATTR(dock, 0444, show_dock_state, ignore_store);
|
|
static DEVICE_ATTR(radios, 0444, show_radios_state, ignore_store);
|
|
|
|
static struct attribute *fujitsupf_attributes[] = {
|
|
&dev_attr_brightness_changed.attr,
|
|
&dev_attr_max_brightness.attr,
|
|
&dev_attr_lcd_level.attr,
|
|
&dev_attr_lid.attr,
|
|
&dev_attr_dock.attr,
|
|
&dev_attr_radios.attr,
|
|
NULL
|
|
};
|
|
|
|
static struct attribute_group fujitsupf_attribute_group = {
|
|
.attrs = fujitsupf_attributes
|
|
};
|
|
|
|
static struct platform_driver fujitsupf_driver = {
|
|
.driver = {
|
|
.name = "fujitsu-laptop",
|
|
.owner = THIS_MODULE,
|
|
}
|
|
};
|
|
|
|
static void dmi_check_cb_common(const struct dmi_system_id *id)
|
|
{
|
|
acpi_handle handle;
|
|
printk(KERN_INFO "fujitsu-laptop: Identified laptop model '%s'.\n",
|
|
id->ident);
|
|
if (use_alt_lcd_levels == -1) {
|
|
if (ACPI_SUCCESS(acpi_get_handle(NULL,
|
|
"\\_SB.PCI0.LPCB.FJEX.SBL2", &handle)))
|
|
use_alt_lcd_levels = 1;
|
|
else
|
|
use_alt_lcd_levels = 0;
|
|
vdbg_printk(FUJLAPTOP_DBG_TRACE, "auto-detected usealt as "
|
|
"%i\n", use_alt_lcd_levels);
|
|
}
|
|
}
|
|
|
|
static int dmi_check_cb_s6410(const struct dmi_system_id *id)
|
|
{
|
|
dmi_check_cb_common(id);
|
|
fujitsu->keycode1 = KEY_SCREENLOCK; /* "Lock" */
|
|
fujitsu->keycode2 = KEY_HELP; /* "Mobility Center" */
|
|
return 0;
|
|
}
|
|
|
|
static int dmi_check_cb_s6420(const struct dmi_system_id *id)
|
|
{
|
|
dmi_check_cb_common(id);
|
|
fujitsu->keycode1 = KEY_SCREENLOCK; /* "Lock" */
|
|
fujitsu->keycode2 = KEY_HELP; /* "Mobility Center" */
|
|
return 0;
|
|
}
|
|
|
|
static int dmi_check_cb_p8010(const struct dmi_system_id *id)
|
|
{
|
|
dmi_check_cb_common(id);
|
|
fujitsu->keycode1 = KEY_HELP; /* "Support" */
|
|
fujitsu->keycode3 = KEY_SWITCHVIDEOMODE; /* "Presentation" */
|
|
fujitsu->keycode4 = KEY_WWW; /* "Internet" */
|
|
return 0;
|
|
}
|
|
|
|
static struct dmi_system_id fujitsu_dmi_table[] = {
|
|
{
|
|
.ident = "Fujitsu Siemens S6410",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S6410"),
|
|
},
|
|
.callback = dmi_check_cb_s6410},
|
|
{
|
|
.ident = "Fujitsu Siemens S6420",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S6420"),
|
|
},
|
|
.callback = dmi_check_cb_s6420},
|
|
{
|
|
.ident = "Fujitsu LifeBook P8010",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook P8010"),
|
|
},
|
|
.callback = dmi_check_cb_p8010},
|
|
{}
|
|
};
|
|
|
|
/* ACPI device for LCD brightness control */
|
|
|
|
static int acpi_fujitsu_add(struct acpi_device *device)
|
|
{
|
|
acpi_status status;
|
|
acpi_handle handle;
|
|
int result = 0;
|
|
int state = 0;
|
|
struct input_dev *input;
|
|
int error;
|
|
|
|
if (!device)
|
|
return -EINVAL;
|
|
|
|
fujitsu->acpi_handle = device->handle;
|
|
sprintf(acpi_device_name(device), "%s", ACPI_FUJITSU_DEVICE_NAME);
|
|
sprintf(acpi_device_class(device), "%s", ACPI_FUJITSU_CLASS);
|
|
device->driver_data = fujitsu;
|
|
|
|
status = acpi_install_notify_handler(device->handle,
|
|
ACPI_DEVICE_NOTIFY,
|
|
acpi_fujitsu_notify, fujitsu);
|
|
|
|
if (ACPI_FAILURE(status)) {
|
|
printk(KERN_ERR "Error installing notify handler\n");
|
|
error = -ENODEV;
|
|
goto err_stop;
|
|
}
|
|
|
|
fujitsu->input = input = input_allocate_device();
|
|
if (!input) {
|
|
error = -ENOMEM;
|
|
goto err_uninstall_notify;
|
|
}
|
|
|
|
snprintf(fujitsu->phys, sizeof(fujitsu->phys),
|
|
"%s/video/input0", acpi_device_hid(device));
|
|
|
|
input->name = acpi_device_name(device);
|
|
input->phys = fujitsu->phys;
|
|
input->id.bustype = BUS_HOST;
|
|
input->id.product = 0x06;
|
|
input->dev.parent = &device->dev;
|
|
input->evbit[0] = BIT(EV_KEY);
|
|
set_bit(KEY_BRIGHTNESSUP, input->keybit);
|
|
set_bit(KEY_BRIGHTNESSDOWN, input->keybit);
|
|
set_bit(KEY_UNKNOWN, input->keybit);
|
|
|
|
error = input_register_device(input);
|
|
if (error)
|
|
goto err_free_input_dev;
|
|
|
|
result = acpi_bus_get_power(fujitsu->acpi_handle, &state);
|
|
if (result) {
|
|
printk(KERN_ERR "Error reading power state\n");
|
|
goto end;
|
|
}
|
|
|
|
printk(KERN_INFO PREFIX "%s [%s] (%s)\n",
|
|
acpi_device_name(device), acpi_device_bid(device),
|
|
!device->power.state ? "on" : "off");
|
|
|
|
fujitsu->dev = device;
|
|
|
|
if (ACPI_SUCCESS
|
|
(acpi_get_handle(device->handle, METHOD_NAME__INI, &handle))) {
|
|
vdbg_printk(FUJLAPTOP_DBG_INFO, "Invoking _INI\n");
|
|
if (ACPI_FAILURE
|
|
(acpi_evaluate_object
|
|
(device->handle, METHOD_NAME__INI, NULL, NULL)))
|
|
printk(KERN_ERR "_INI Method failed\n");
|
|
}
|
|
|
|
/* do config (detect defaults) */
|
|
use_alt_lcd_levels = use_alt_lcd_levels == 1 ? 1 : 0;
|
|
disable_brightness_adjust = disable_brightness_adjust == 1 ? 1 : 0;
|
|
vdbg_printk(FUJLAPTOP_DBG_INFO,
|
|
"config: [alt interface: %d], [adjust disable: %d]\n",
|
|
use_alt_lcd_levels, disable_brightness_adjust);
|
|
|
|
if (get_max_brightness() <= 0)
|
|
fujitsu->max_brightness = FUJITSU_LCD_N_LEVELS;
|
|
get_lcd_level();
|
|
|
|
return result;
|
|
|
|
end:
|
|
err_free_input_dev:
|
|
input_free_device(input);
|
|
err_uninstall_notify:
|
|
acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY,
|
|
acpi_fujitsu_notify);
|
|
err_stop:
|
|
|
|
return result;
|
|
}
|
|
|
|
static int acpi_fujitsu_remove(struct acpi_device *device, int type)
|
|
{
|
|
acpi_status status;
|
|
struct fujitsu_t *fujitsu = NULL;
|
|
|
|
if (!device || !acpi_driver_data(device))
|
|
return -EINVAL;
|
|
|
|
fujitsu = acpi_driver_data(device);
|
|
|
|
status = acpi_remove_notify_handler(fujitsu->acpi_handle,
|
|
ACPI_DEVICE_NOTIFY,
|
|
acpi_fujitsu_notify);
|
|
|
|
if (!device || !acpi_driver_data(device))
|
|
return -EINVAL;
|
|
|
|
fujitsu->acpi_handle = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Brightness notify */
|
|
|
|
static void acpi_fujitsu_notify(acpi_handle handle, u32 event, void *data)
|
|
{
|
|
struct input_dev *input;
|
|
int keycode;
|
|
int oldb, newb;
|
|
|
|
input = fujitsu->input;
|
|
|
|
switch (event) {
|
|
case ACPI_FUJITSU_NOTIFY_CODE1:
|
|
keycode = 0;
|
|
oldb = fujitsu->brightness_level;
|
|
get_lcd_level();
|
|
newb = fujitsu->brightness_level;
|
|
|
|
vdbg_printk(FUJLAPTOP_DBG_TRACE,
|
|
"brightness button event [%i -> %i (%i)]\n",
|
|
oldb, newb, fujitsu->brightness_changed);
|
|
|
|
if (oldb < newb) {
|
|
if (disable_brightness_adjust != 1) {
|
|
if (use_alt_lcd_levels)
|
|
set_lcd_level_alt(newb);
|
|
else
|
|
set_lcd_level(newb);
|
|
}
|
|
acpi_bus_generate_proc_event(fujitsu->dev,
|
|
ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS, 0);
|
|
keycode = KEY_BRIGHTNESSUP;
|
|
} else if (oldb > newb) {
|
|
if (disable_brightness_adjust != 1) {
|
|
if (use_alt_lcd_levels)
|
|
set_lcd_level_alt(newb);
|
|
else
|
|
set_lcd_level(newb);
|
|
}
|
|
acpi_bus_generate_proc_event(fujitsu->dev,
|
|
ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS, 0);
|
|
keycode = KEY_BRIGHTNESSDOWN;
|
|
}
|
|
break;
|
|
default:
|
|
keycode = KEY_UNKNOWN;
|
|
vdbg_printk(FUJLAPTOP_DBG_WARN,
|
|
"unsupported event [0x%x]\n", event);
|
|
break;
|
|
}
|
|
|
|
if (keycode != 0) {
|
|
input_report_key(input, keycode, 1);
|
|
input_sync(input);
|
|
input_report_key(input, keycode, 0);
|
|
input_sync(input);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/* ACPI device for hotkey handling */
|
|
|
|
static int acpi_fujitsu_hotkey_add(struct acpi_device *device)
|
|
{
|
|
acpi_status status;
|
|
acpi_handle handle;
|
|
int result = 0;
|
|
int state = 0;
|
|
struct input_dev *input;
|
|
int error;
|
|
int i;
|
|
|
|
if (!device)
|
|
return -EINVAL;
|
|
|
|
fujitsu_hotkey->acpi_handle = device->handle;
|
|
sprintf(acpi_device_name(device), "%s",
|
|
ACPI_FUJITSU_HOTKEY_DEVICE_NAME);
|
|
sprintf(acpi_device_class(device), "%s", ACPI_FUJITSU_CLASS);
|
|
device->driver_data = fujitsu_hotkey;
|
|
|
|
status = acpi_install_notify_handler(device->handle,
|
|
ACPI_DEVICE_NOTIFY,
|
|
acpi_fujitsu_hotkey_notify,
|
|
fujitsu_hotkey);
|
|
|
|
if (ACPI_FAILURE(status)) {
|
|
printk(KERN_ERR "Error installing notify handler\n");
|
|
error = -ENODEV;
|
|
goto err_stop;
|
|
}
|
|
|
|
/* kfifo */
|
|
spin_lock_init(&fujitsu_hotkey->fifo_lock);
|
|
fujitsu_hotkey->fifo =
|
|
kfifo_alloc(RINGBUFFERSIZE * sizeof(int), GFP_KERNEL,
|
|
&fujitsu_hotkey->fifo_lock);
|
|
if (IS_ERR(fujitsu_hotkey->fifo)) {
|
|
printk(KERN_ERR "kfifo_alloc failed\n");
|
|
error = PTR_ERR(fujitsu_hotkey->fifo);
|
|
goto err_stop;
|
|
}
|
|
|
|
fujitsu_hotkey->input = input = input_allocate_device();
|
|
if (!input) {
|
|
error = -ENOMEM;
|
|
goto err_uninstall_notify;
|
|
}
|
|
|
|
snprintf(fujitsu_hotkey->phys, sizeof(fujitsu_hotkey->phys),
|
|
"%s/video/input0", acpi_device_hid(device));
|
|
|
|
input->name = acpi_device_name(device);
|
|
input->phys = fujitsu_hotkey->phys;
|
|
input->id.bustype = BUS_HOST;
|
|
input->id.product = 0x06;
|
|
input->dev.parent = &device->dev;
|
|
|
|
set_bit(EV_KEY, input->evbit);
|
|
set_bit(fujitsu->keycode1, input->keybit);
|
|
set_bit(fujitsu->keycode2, input->keybit);
|
|
set_bit(fujitsu->keycode3, input->keybit);
|
|
set_bit(fujitsu->keycode4, input->keybit);
|
|
set_bit(KEY_UNKNOWN, input->keybit);
|
|
|
|
error = input_register_device(input);
|
|
if (error)
|
|
goto err_free_input_dev;
|
|
|
|
result = acpi_bus_get_power(fujitsu_hotkey->acpi_handle, &state);
|
|
if (result) {
|
|
printk(KERN_ERR "Error reading power state\n");
|
|
goto end;
|
|
}
|
|
|
|
printk(KERN_INFO PREFIX "%s [%s] (%s)\n",
|
|
acpi_device_name(device), acpi_device_bid(device),
|
|
!device->power.state ? "on" : "off");
|
|
|
|
fujitsu_hotkey->dev = device;
|
|
|
|
if (ACPI_SUCCESS
|
|
(acpi_get_handle(device->handle, METHOD_NAME__INI, &handle))) {
|
|
vdbg_printk(FUJLAPTOP_DBG_INFO, "Invoking _INI\n");
|
|
if (ACPI_FAILURE
|
|
(acpi_evaluate_object
|
|
(device->handle, METHOD_NAME__INI, NULL, NULL)))
|
|
printk(KERN_ERR "_INI Method failed\n");
|
|
}
|
|
|
|
i = 0;
|
|
while (call_fext_func(FUNC_BUTTONS, 0x1, 0x0, 0x0) != 0
|
|
&& (i++) < MAX_HOTKEY_RINGBUFFER_SIZE)
|
|
; /* No action, result is discarded */
|
|
vdbg_printk(FUJLAPTOP_DBG_INFO, "Discarded %i ringbuffer entries\n", i);
|
|
|
|
fujitsu_hotkey->rfkill_supported =
|
|
call_fext_func(FUNC_RFKILL, 0x0, 0x0, 0x0);
|
|
|
|
/* Make sure our bitmask of supported functions is cleared if the
|
|
RFKILL function block is not implemented, like on the S7020. */
|
|
if (fujitsu_hotkey->rfkill_supported == UNSUPPORTED_CMD)
|
|
fujitsu_hotkey->rfkill_supported = 0;
|
|
|
|
if (fujitsu_hotkey->rfkill_supported)
|
|
fujitsu_hotkey->rfkill_state =
|
|
call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0);
|
|
|
|
/* Suspect this is a keymap of the application panel, print it */
|
|
printk(KERN_INFO "fujitsu-laptop: BTNI: [0x%x]\n",
|
|
call_fext_func(FUNC_BUTTONS, 0x0, 0x0, 0x0));
|
|
|
|
#ifdef CONFIG_LEDS_CLASS
|
|
if (call_fext_func(FUNC_LEDS, 0x0, 0x0, 0x0) & LOGOLAMP_POWERON) {
|
|
result = led_classdev_register(&fujitsu->pf_device->dev,
|
|
&logolamp_led);
|
|
if (result == 0) {
|
|
fujitsu_hotkey->logolamp_registered = 1;
|
|
} else {
|
|
printk(KERN_ERR "fujitsu-laptop: Could not register "
|
|
"LED handler for logo lamp, error %i\n", result);
|
|
}
|
|
}
|
|
|
|
if ((call_fext_func(FUNC_LEDS, 0x0, 0x0, 0x0) & KEYBOARD_LAMPS) &&
|
|
(call_fext_func(FUNC_BUTTONS, 0x0, 0x0, 0x0) == 0x0)) {
|
|
result = led_classdev_register(&fujitsu->pf_device->dev,
|
|
&kblamps_led);
|
|
if (result == 0) {
|
|
fujitsu_hotkey->kblamps_registered = 1;
|
|
} else {
|
|
printk(KERN_ERR "fujitsu-laptop: Could not register "
|
|
"LED handler for keyboard lamps, error %i\n", result);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
return result;
|
|
|
|
end:
|
|
err_free_input_dev:
|
|
input_free_device(input);
|
|
err_uninstall_notify:
|
|
acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY,
|
|
acpi_fujitsu_hotkey_notify);
|
|
kfifo_free(fujitsu_hotkey->fifo);
|
|
err_stop:
|
|
|
|
return result;
|
|
}
|
|
|
|
static int acpi_fujitsu_hotkey_remove(struct acpi_device *device, int type)
|
|
{
|
|
acpi_status status;
|
|
struct fujitsu_hotkey_t *fujitsu_hotkey = NULL;
|
|
|
|
if (!device || !acpi_driver_data(device))
|
|
return -EINVAL;
|
|
|
|
fujitsu_hotkey = acpi_driver_data(device);
|
|
|
|
status = acpi_remove_notify_handler(fujitsu_hotkey->acpi_handle,
|
|
ACPI_DEVICE_NOTIFY,
|
|
acpi_fujitsu_hotkey_notify);
|
|
|
|
fujitsu_hotkey->acpi_handle = NULL;
|
|
|
|
kfifo_free(fujitsu_hotkey->fifo);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void acpi_fujitsu_hotkey_notify(acpi_handle handle, u32 event,
|
|
void *data)
|
|
{
|
|
struct input_dev *input;
|
|
int keycode, keycode_r;
|
|
unsigned int irb = 1;
|
|
int i, status;
|
|
|
|
input = fujitsu_hotkey->input;
|
|
|
|
if (fujitsu_hotkey->rfkill_supported)
|
|
fujitsu_hotkey->rfkill_state =
|
|
call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0);
|
|
|
|
switch (event) {
|
|
case ACPI_FUJITSU_NOTIFY_CODE1:
|
|
i = 0;
|
|
while ((irb =
|
|
call_fext_func(FUNC_BUTTONS, 0x1, 0x0, 0x0)) != 0
|
|
&& (i++) < MAX_HOTKEY_RINGBUFFER_SIZE) {
|
|
switch (irb & 0x4ff) {
|
|
case KEY1_CODE:
|
|
keycode = fujitsu->keycode1;
|
|
break;
|
|
case KEY2_CODE:
|
|
keycode = fujitsu->keycode2;
|
|
break;
|
|
case KEY3_CODE:
|
|
keycode = fujitsu->keycode3;
|
|
break;
|
|
case KEY4_CODE:
|
|
keycode = fujitsu->keycode4;
|
|
break;
|
|
case 0:
|
|
keycode = 0;
|
|
break;
|
|
default:
|
|
vdbg_printk(FUJLAPTOP_DBG_WARN,
|
|
"Unknown GIRB result [%x]\n", irb);
|
|
keycode = -1;
|
|
break;
|
|
}
|
|
if (keycode > 0) {
|
|
vdbg_printk(FUJLAPTOP_DBG_TRACE,
|
|
"Push keycode into ringbuffer [%d]\n",
|
|
keycode);
|
|
status = kfifo_put(fujitsu_hotkey->fifo,
|
|
(unsigned char *)&keycode,
|
|
sizeof(keycode));
|
|
if (status != sizeof(keycode)) {
|
|
vdbg_printk(FUJLAPTOP_DBG_WARN,
|
|
"Could not push keycode [0x%x]\n",
|
|
keycode);
|
|
} else {
|
|
input_report_key(input, keycode, 1);
|
|
input_sync(input);
|
|
}
|
|
} else if (keycode == 0) {
|
|
while ((status =
|
|
kfifo_get
|
|
(fujitsu_hotkey->fifo, (unsigned char *)
|
|
&keycode_r,
|
|
sizeof
|
|
(keycode_r))) == sizeof(keycode_r)) {
|
|
input_report_key(input, keycode_r, 0);
|
|
input_sync(input);
|
|
vdbg_printk(FUJLAPTOP_DBG_TRACE,
|
|
"Pop keycode from ringbuffer [%d]\n",
|
|
keycode_r);
|
|
}
|
|
}
|
|
}
|
|
|
|
break;
|
|
default:
|
|
keycode = KEY_UNKNOWN;
|
|
vdbg_printk(FUJLAPTOP_DBG_WARN,
|
|
"Unsupported event [0x%x]\n", event);
|
|
input_report_key(input, keycode, 1);
|
|
input_sync(input);
|
|
input_report_key(input, keycode, 0);
|
|
input_sync(input);
|
|
break;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/* Initialization */
|
|
|
|
static const struct acpi_device_id fujitsu_device_ids[] = {
|
|
{ACPI_FUJITSU_HID, 0},
|
|
{"", 0},
|
|
};
|
|
|
|
static struct acpi_driver acpi_fujitsu_driver = {
|
|
.name = ACPI_FUJITSU_DRIVER_NAME,
|
|
.class = ACPI_FUJITSU_CLASS,
|
|
.ids = fujitsu_device_ids,
|
|
.ops = {
|
|
.add = acpi_fujitsu_add,
|
|
.remove = acpi_fujitsu_remove,
|
|
},
|
|
};
|
|
|
|
static const struct acpi_device_id fujitsu_hotkey_device_ids[] = {
|
|
{ACPI_FUJITSU_HOTKEY_HID, 0},
|
|
{"", 0},
|
|
};
|
|
|
|
static struct acpi_driver acpi_fujitsu_hotkey_driver = {
|
|
.name = ACPI_FUJITSU_HOTKEY_DRIVER_NAME,
|
|
.class = ACPI_FUJITSU_CLASS,
|
|
.ids = fujitsu_hotkey_device_ids,
|
|
.ops = {
|
|
.add = acpi_fujitsu_hotkey_add,
|
|
.remove = acpi_fujitsu_hotkey_remove,
|
|
},
|
|
};
|
|
|
|
static int __init fujitsu_init(void)
|
|
{
|
|
int ret, result, max_brightness;
|
|
|
|
if (acpi_disabled)
|
|
return -ENODEV;
|
|
|
|
fujitsu = kmalloc(sizeof(struct fujitsu_t), GFP_KERNEL);
|
|
if (!fujitsu)
|
|
return -ENOMEM;
|
|
memset(fujitsu, 0, sizeof(struct fujitsu_t));
|
|
fujitsu->keycode1 = KEY_PROG1;
|
|
fujitsu->keycode2 = KEY_PROG2;
|
|
fujitsu->keycode3 = KEY_PROG3;
|
|
fujitsu->keycode4 = KEY_PROG4;
|
|
dmi_check_system(fujitsu_dmi_table);
|
|
|
|
result = acpi_bus_register_driver(&acpi_fujitsu_driver);
|
|
if (result < 0) {
|
|
ret = -ENODEV;
|
|
goto fail_acpi;
|
|
}
|
|
|
|
/* Register platform stuff */
|
|
|
|
fujitsu->pf_device = platform_device_alloc("fujitsu-laptop", -1);
|
|
if (!fujitsu->pf_device) {
|
|
ret = -ENOMEM;
|
|
goto fail_platform_driver;
|
|
}
|
|
|
|
ret = platform_device_add(fujitsu->pf_device);
|
|
if (ret)
|
|
goto fail_platform_device1;
|
|
|
|
ret =
|
|
sysfs_create_group(&fujitsu->pf_device->dev.kobj,
|
|
&fujitsupf_attribute_group);
|
|
if (ret)
|
|
goto fail_platform_device2;
|
|
|
|
/* Register backlight stuff */
|
|
|
|
if (!acpi_video_backlight_support()) {
|
|
fujitsu->bl_device =
|
|
backlight_device_register("fujitsu-laptop", NULL, NULL,
|
|
&fujitsubl_ops);
|
|
if (IS_ERR(fujitsu->bl_device))
|
|
return PTR_ERR(fujitsu->bl_device);
|
|
max_brightness = fujitsu->max_brightness;
|
|
fujitsu->bl_device->props.max_brightness = max_brightness - 1;
|
|
fujitsu->bl_device->props.brightness = fujitsu->brightness_level;
|
|
}
|
|
|
|
ret = platform_driver_register(&fujitsupf_driver);
|
|
if (ret)
|
|
goto fail_backlight;
|
|
|
|
/* Register hotkey driver */
|
|
|
|
fujitsu_hotkey = kmalloc(sizeof(struct fujitsu_hotkey_t), GFP_KERNEL);
|
|
if (!fujitsu_hotkey) {
|
|
ret = -ENOMEM;
|
|
goto fail_hotkey;
|
|
}
|
|
memset(fujitsu_hotkey, 0, sizeof(struct fujitsu_hotkey_t));
|
|
|
|
result = acpi_bus_register_driver(&acpi_fujitsu_hotkey_driver);
|
|
if (result < 0) {
|
|
ret = -ENODEV;
|
|
goto fail_hotkey1;
|
|
}
|
|
|
|
/* Sync backlight power status (needs FUJ02E3 device, hence deferred) */
|
|
|
|
if (!acpi_video_backlight_support()) {
|
|
if (call_fext_func(FUNC_BACKLIGHT, 0x2, 0x4, 0x0) == 3)
|
|
fujitsu->bl_device->props.power = 4;
|
|
else
|
|
fujitsu->bl_device->props.power = 0;
|
|
}
|
|
|
|
printk(KERN_INFO "fujitsu-laptop: driver " FUJITSU_DRIVER_VERSION
|
|
" successfully loaded.\n");
|
|
|
|
return 0;
|
|
|
|
fail_hotkey1:
|
|
|
|
kfree(fujitsu_hotkey);
|
|
|
|
fail_hotkey:
|
|
|
|
platform_driver_unregister(&fujitsupf_driver);
|
|
|
|
fail_backlight:
|
|
|
|
if (fujitsu->bl_device)
|
|
backlight_device_unregister(fujitsu->bl_device);
|
|
|
|
fail_platform_device2:
|
|
|
|
platform_device_del(fujitsu->pf_device);
|
|
|
|
fail_platform_device1:
|
|
|
|
platform_device_put(fujitsu->pf_device);
|
|
|
|
fail_platform_driver:
|
|
|
|
acpi_bus_unregister_driver(&acpi_fujitsu_driver);
|
|
|
|
fail_acpi:
|
|
|
|
kfree(fujitsu);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void __exit fujitsu_cleanup(void)
|
|
{
|
|
#ifdef CONFIG_LEDS_CLASS
|
|
if (fujitsu_hotkey->logolamp_registered != 0)
|
|
led_classdev_unregister(&logolamp_led);
|
|
|
|
if (fujitsu_hotkey->kblamps_registered != 0)
|
|
led_classdev_unregister(&kblamps_led);
|
|
#endif
|
|
|
|
sysfs_remove_group(&fujitsu->pf_device->dev.kobj,
|
|
&fujitsupf_attribute_group);
|
|
platform_device_unregister(fujitsu->pf_device);
|
|
platform_driver_unregister(&fujitsupf_driver);
|
|
if (fujitsu->bl_device)
|
|
backlight_device_unregister(fujitsu->bl_device);
|
|
|
|
acpi_bus_unregister_driver(&acpi_fujitsu_driver);
|
|
|
|
kfree(fujitsu);
|
|
|
|
acpi_bus_unregister_driver(&acpi_fujitsu_hotkey_driver);
|
|
|
|
kfree(fujitsu_hotkey);
|
|
|
|
printk(KERN_INFO "fujitsu-laptop: driver unloaded.\n");
|
|
}
|
|
|
|
module_init(fujitsu_init);
|
|
module_exit(fujitsu_cleanup);
|
|
|
|
module_param(use_alt_lcd_levels, uint, 0644);
|
|
MODULE_PARM_DESC(use_alt_lcd_levels,
|
|
"Use alternative interface for lcd_levels (needed for Lifebook s6410).");
|
|
module_param(disable_brightness_adjust, uint, 0644);
|
|
MODULE_PARM_DESC(disable_brightness_adjust, "Disable brightness adjustment .");
|
|
#ifdef CONFIG_FUJITSU_LAPTOP_DEBUG
|
|
module_param_named(debug, dbg_level, uint, 0644);
|
|
MODULE_PARM_DESC(debug, "Sets debug level bit-mask");
|
|
#endif
|
|
|
|
MODULE_AUTHOR("Jonathan Woithe, Peter Gruber, Tony Vroon");
|
|
MODULE_DESCRIPTION("Fujitsu laptop extras support");
|
|
MODULE_VERSION(FUJITSU_DRIVER_VERSION);
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_ALIAS("dmi:*:svnFUJITSUSIEMENS:*:pvr:rvnFUJITSU:rnFJNB1D3:*:cvrS6410:*");
|
|
MODULE_ALIAS("dmi:*:svnFUJITSUSIEMENS:*:pvr:rvnFUJITSU:rnFJNB1E6:*:cvrS6420:*");
|
|
MODULE_ALIAS("dmi:*:svnFUJITSU:*:pvr:rvnFUJITSU:rnFJNB19C:*:cvrS7020:*");
|
|
|
|
static struct pnp_device_id pnp_ids[] = {
|
|
{.id = "FUJ02bf"},
|
|
{.id = "FUJ02B1"},
|
|
{.id = "FUJ02E3"},
|
|
{.id = ""}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pnp, pnp_ids);
|