forked from Minki/linux
d623a0e19d
The wake-up interrupt bit is available on omap3/4/5 processors unlike what we claim. Without fixing it we cannot use it on omap3 and the system configured for wake-up events will just hang on wake-up. Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
537 lines
12 KiB
Plaintext
537 lines
12 KiB
Plaintext
/*
|
|
* Device Tree Source for OMAP3 SoC
|
|
*
|
|
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public License
|
|
* version 2. This program is licensed "as is" without any warranty of any
|
|
* kind, whether express or implied.
|
|
*/
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/pinctrl/omap.h>
|
|
|
|
#include "skeleton.dtsi"
|
|
|
|
/ {
|
|
compatible = "ti,omap3430", "ti,omap3";
|
|
interrupt-parent = <&intc>;
|
|
|
|
aliases {
|
|
serial0 = &uart1;
|
|
serial1 = &uart2;
|
|
serial2 = &uart3;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
compatible = "arm,cortex-a8";
|
|
device_type = "cpu";
|
|
reg = <0x0>;
|
|
};
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,cortex-a8-pmu";
|
|
interrupts = <3>;
|
|
ti,hwmods = "debugss";
|
|
};
|
|
|
|
/*
|
|
* The soc node represents the soc top level view. It is used for IPs
|
|
* that are not memory mapped in the MPU view or for the MPU itself.
|
|
*/
|
|
soc {
|
|
compatible = "ti,omap-infra";
|
|
mpu {
|
|
compatible = "ti,omap3-mpu";
|
|
ti,hwmods = "mpu";
|
|
};
|
|
|
|
iva {
|
|
compatible = "ti,iva2.2";
|
|
ti,hwmods = "iva";
|
|
|
|
dsp {
|
|
compatible = "ti,omap3-c64";
|
|
};
|
|
};
|
|
};
|
|
|
|
/*
|
|
* XXX: Use a flat representation of the OMAP3 interconnect.
|
|
* The real OMAP interconnect network is quite complex.
|
|
* Since that will not bring real advantage to represent that in DT for
|
|
* the moment, just use a fake OCP bus entry to represent the whole bus
|
|
* hierarchy.
|
|
*/
|
|
ocp {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
ti,hwmods = "l3_main";
|
|
|
|
counter32k: counter@48320000 {
|
|
compatible = "ti,omap-counter32k";
|
|
reg = <0x48320000 0x20>;
|
|
ti,hwmods = "counter_32k";
|
|
};
|
|
|
|
intc: interrupt-controller@48200000 {
|
|
compatible = "ti,omap2-intc";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
ti,intc-size = <96>;
|
|
reg = <0x48200000 0x1000>;
|
|
};
|
|
|
|
sdma: dma-controller@48056000 {
|
|
compatible = "ti,omap3630-sdma", "ti,omap3430-sdma";
|
|
reg = <0x48056000 0x1000>;
|
|
interrupts = <12>,
|
|
<13>,
|
|
<14>,
|
|
<15>;
|
|
#dma-cells = <1>;
|
|
#dma-channels = <32>;
|
|
#dma-requests = <96>;
|
|
};
|
|
|
|
omap3_pmx_core: pinmux@48002030 {
|
|
compatible = "ti,omap3-padconf", "pinctrl-single";
|
|
reg = <0x48002030 0x05cc>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-single,register-width = <16>;
|
|
pinctrl-single,function-mask = <0xff1f>;
|
|
};
|
|
|
|
omap3_pmx_wkup: pinmux@0x48002a00 {
|
|
compatible = "ti,omap3-padconf", "pinctrl-single";
|
|
reg = <0x48002a00 0x5c>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-single,register-width = <16>;
|
|
pinctrl-single,function-mask = <0xff1f>;
|
|
};
|
|
|
|
gpio1: gpio@48310000 {
|
|
compatible = "ti,omap3-gpio";
|
|
reg = <0x48310000 0x200>;
|
|
interrupts = <29>;
|
|
ti,hwmods = "gpio1";
|
|
ti,gpio-always-on;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio2: gpio@49050000 {
|
|
compatible = "ti,omap3-gpio";
|
|
reg = <0x49050000 0x200>;
|
|
interrupts = <30>;
|
|
ti,hwmods = "gpio2";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio3: gpio@49052000 {
|
|
compatible = "ti,omap3-gpio";
|
|
reg = <0x49052000 0x200>;
|
|
interrupts = <31>;
|
|
ti,hwmods = "gpio3";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio4: gpio@49054000 {
|
|
compatible = "ti,omap3-gpio";
|
|
reg = <0x49054000 0x200>;
|
|
interrupts = <32>;
|
|
ti,hwmods = "gpio4";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio5: gpio@49056000 {
|
|
compatible = "ti,omap3-gpio";
|
|
reg = <0x49056000 0x200>;
|
|
interrupts = <33>;
|
|
ti,hwmods = "gpio5";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio6: gpio@49058000 {
|
|
compatible = "ti,omap3-gpio";
|
|
reg = <0x49058000 0x200>;
|
|
interrupts = <34>;
|
|
ti,hwmods = "gpio6";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
uart1: serial@4806a000 {
|
|
compatible = "ti,omap3-uart";
|
|
ti,hwmods = "uart1";
|
|
clock-frequency = <48000000>;
|
|
};
|
|
|
|
uart2: serial@4806c000 {
|
|
compatible = "ti,omap3-uart";
|
|
ti,hwmods = "uart2";
|
|
clock-frequency = <48000000>;
|
|
};
|
|
|
|
uart3: serial@49020000 {
|
|
compatible = "ti,omap3-uart";
|
|
ti,hwmods = "uart3";
|
|
clock-frequency = <48000000>;
|
|
};
|
|
|
|
i2c1: i2c@48070000 {
|
|
compatible = "ti,omap3-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "i2c1";
|
|
};
|
|
|
|
i2c2: i2c@48072000 {
|
|
compatible = "ti,omap3-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "i2c2";
|
|
};
|
|
|
|
i2c3: i2c@48060000 {
|
|
compatible = "ti,omap3-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "i2c3";
|
|
};
|
|
|
|
mcspi1: spi@48098000 {
|
|
compatible = "ti,omap2-mcspi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "mcspi1";
|
|
ti,spi-num-cs = <4>;
|
|
dmas = <&sdma 35>,
|
|
<&sdma 36>,
|
|
<&sdma 37>,
|
|
<&sdma 38>,
|
|
<&sdma 39>,
|
|
<&sdma 40>,
|
|
<&sdma 41>,
|
|
<&sdma 42>;
|
|
dma-names = "tx0", "rx0", "tx1", "rx1",
|
|
"tx2", "rx2", "tx3", "rx3";
|
|
};
|
|
|
|
mcspi2: spi@4809a000 {
|
|
compatible = "ti,omap2-mcspi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "mcspi2";
|
|
ti,spi-num-cs = <2>;
|
|
dmas = <&sdma 43>,
|
|
<&sdma 44>,
|
|
<&sdma 45>,
|
|
<&sdma 46>;
|
|
dma-names = "tx0", "rx0", "tx1", "rx1";
|
|
};
|
|
|
|
mcspi3: spi@480b8000 {
|
|
compatible = "ti,omap2-mcspi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "mcspi3";
|
|
ti,spi-num-cs = <2>;
|
|
dmas = <&sdma 15>,
|
|
<&sdma 16>,
|
|
<&sdma 23>,
|
|
<&sdma 24>;
|
|
dma-names = "tx0", "rx0", "tx1", "rx1";
|
|
};
|
|
|
|
mcspi4: spi@480ba000 {
|
|
compatible = "ti,omap2-mcspi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ti,hwmods = "mcspi4";
|
|
ti,spi-num-cs = <1>;
|
|
dmas = <&sdma 70>, <&sdma 71>;
|
|
dma-names = "tx0", "rx0";
|
|
};
|
|
|
|
mmc1: mmc@4809c000 {
|
|
compatible = "ti,omap3-hsmmc";
|
|
ti,hwmods = "mmc1";
|
|
ti,dual-volt;
|
|
dmas = <&sdma 61>, <&sdma 62>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
mmc2: mmc@480b4000 {
|
|
compatible = "ti,omap3-hsmmc";
|
|
ti,hwmods = "mmc2";
|
|
dmas = <&sdma 47>, <&sdma 48>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
mmc3: mmc@480ad000 {
|
|
compatible = "ti,omap3-hsmmc";
|
|
ti,hwmods = "mmc3";
|
|
dmas = <&sdma 77>, <&sdma 78>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
wdt2: wdt@48314000 {
|
|
compatible = "ti,omap3-wdt";
|
|
ti,hwmods = "wd_timer2";
|
|
};
|
|
|
|
mcbsp1: mcbsp@48074000 {
|
|
compatible = "ti,omap3-mcbsp";
|
|
reg = <0x48074000 0xff>;
|
|
reg-names = "mpu";
|
|
interrupts = <16>, /* OCP compliant interrupt */
|
|
<59>, /* TX interrupt */
|
|
<60>; /* RX interrupt */
|
|
interrupt-names = "common", "tx", "rx";
|
|
ti,buffer-size = <128>;
|
|
ti,hwmods = "mcbsp1";
|
|
dmas = <&sdma 31>,
|
|
<&sdma 32>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
mcbsp2: mcbsp@49022000 {
|
|
compatible = "ti,omap3-mcbsp";
|
|
reg = <0x49022000 0xff>,
|
|
<0x49028000 0xff>;
|
|
reg-names = "mpu", "sidetone";
|
|
interrupts = <17>, /* OCP compliant interrupt */
|
|
<62>, /* TX interrupt */
|
|
<63>, /* RX interrupt */
|
|
<4>; /* Sidetone */
|
|
interrupt-names = "common", "tx", "rx", "sidetone";
|
|
ti,buffer-size = <1280>;
|
|
ti,hwmods = "mcbsp2", "mcbsp2_sidetone";
|
|
dmas = <&sdma 33>,
|
|
<&sdma 34>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
mcbsp3: mcbsp@49024000 {
|
|
compatible = "ti,omap3-mcbsp";
|
|
reg = <0x49024000 0xff>,
|
|
<0x4902a000 0xff>;
|
|
reg-names = "mpu", "sidetone";
|
|
interrupts = <22>, /* OCP compliant interrupt */
|
|
<89>, /* TX interrupt */
|
|
<90>, /* RX interrupt */
|
|
<5>; /* Sidetone */
|
|
interrupt-names = "common", "tx", "rx", "sidetone";
|
|
ti,buffer-size = <128>;
|
|
ti,hwmods = "mcbsp3", "mcbsp3_sidetone";
|
|
dmas = <&sdma 17>,
|
|
<&sdma 18>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
mcbsp4: mcbsp@49026000 {
|
|
compatible = "ti,omap3-mcbsp";
|
|
reg = <0x49026000 0xff>;
|
|
reg-names = "mpu";
|
|
interrupts = <23>, /* OCP compliant interrupt */
|
|
<54>, /* TX interrupt */
|
|
<55>; /* RX interrupt */
|
|
interrupt-names = "common", "tx", "rx";
|
|
ti,buffer-size = <128>;
|
|
ti,hwmods = "mcbsp4";
|
|
dmas = <&sdma 19>,
|
|
<&sdma 20>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
mcbsp5: mcbsp@48096000 {
|
|
compatible = "ti,omap3-mcbsp";
|
|
reg = <0x48096000 0xff>;
|
|
reg-names = "mpu";
|
|
interrupts = <27>, /* OCP compliant interrupt */
|
|
<81>, /* TX interrupt */
|
|
<82>; /* RX interrupt */
|
|
interrupt-names = "common", "tx", "rx";
|
|
ti,buffer-size = <128>;
|
|
ti,hwmods = "mcbsp5";
|
|
dmas = <&sdma 21>,
|
|
<&sdma 22>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
timer1: timer@48318000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x48318000 0x400>;
|
|
interrupts = <37>;
|
|
ti,hwmods = "timer1";
|
|
ti,timer-alwon;
|
|
};
|
|
|
|
timer2: timer@49032000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x49032000 0x400>;
|
|
interrupts = <38>;
|
|
ti,hwmods = "timer2";
|
|
};
|
|
|
|
timer3: timer@49034000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x49034000 0x400>;
|
|
interrupts = <39>;
|
|
ti,hwmods = "timer3";
|
|
};
|
|
|
|
timer4: timer@49036000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x49036000 0x400>;
|
|
interrupts = <40>;
|
|
ti,hwmods = "timer4";
|
|
};
|
|
|
|
timer5: timer@49038000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x49038000 0x400>;
|
|
interrupts = <41>;
|
|
ti,hwmods = "timer5";
|
|
ti,timer-dsp;
|
|
};
|
|
|
|
timer6: timer@4903a000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x4903a000 0x400>;
|
|
interrupts = <42>;
|
|
ti,hwmods = "timer6";
|
|
ti,timer-dsp;
|
|
};
|
|
|
|
timer7: timer@4903c000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x4903c000 0x400>;
|
|
interrupts = <43>;
|
|
ti,hwmods = "timer7";
|
|
ti,timer-dsp;
|
|
};
|
|
|
|
timer8: timer@4903e000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x4903e000 0x400>;
|
|
interrupts = <44>;
|
|
ti,hwmods = "timer8";
|
|
ti,timer-pwm;
|
|
ti,timer-dsp;
|
|
};
|
|
|
|
timer9: timer@49040000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x49040000 0x400>;
|
|
interrupts = <45>;
|
|
ti,hwmods = "timer9";
|
|
ti,timer-pwm;
|
|
};
|
|
|
|
timer10: timer@48086000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x48086000 0x400>;
|
|
interrupts = <46>;
|
|
ti,hwmods = "timer10";
|
|
ti,timer-pwm;
|
|
};
|
|
|
|
timer11: timer@48088000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x48088000 0x400>;
|
|
interrupts = <47>;
|
|
ti,hwmods = "timer11";
|
|
ti,timer-pwm;
|
|
};
|
|
|
|
timer12: timer@48304000 {
|
|
compatible = "ti,omap3430-timer";
|
|
reg = <0x48304000 0x400>;
|
|
interrupts = <95>;
|
|
ti,hwmods = "timer12";
|
|
ti,timer-alwon;
|
|
ti,timer-secure;
|
|
};
|
|
|
|
usbhstll: usbhstll@48062000 {
|
|
compatible = "ti,usbhs-tll";
|
|
reg = <0x48062000 0x1000>;
|
|
interrupts = <78>;
|
|
ti,hwmods = "usb_tll_hs";
|
|
};
|
|
|
|
usbhshost: usbhshost@48064000 {
|
|
compatible = "ti,usbhs-host";
|
|
reg = <0x48064000 0x400>;
|
|
ti,hwmods = "usb_host_hs";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
usbhsohci: ohci@48064400 {
|
|
compatible = "ti,ohci-omap3", "usb-ohci";
|
|
reg = <0x48064400 0x400>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <76>;
|
|
};
|
|
|
|
usbhsehci: ehci@48064800 {
|
|
compatible = "ti,ehci-omap", "usb-ehci";
|
|
reg = <0x48064800 0x400>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <77>;
|
|
};
|
|
};
|
|
|
|
gpmc: gpmc@6e000000 {
|
|
compatible = "ti,omap3430-gpmc";
|
|
ti,hwmods = "gpmc";
|
|
reg = <0x6e000000 0x02d0>;
|
|
interrupts = <20>;
|
|
gpmc,num-cs = <8>;
|
|
gpmc,num-waitpins = <4>;
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
};
|
|
|
|
usb_otg_hs: usb_otg_hs@480ab000 {
|
|
compatible = "ti,omap3-musb";
|
|
reg = <0x480ab000 0x1000>;
|
|
interrupts = <92>, <93>;
|
|
interrupt-names = "mc", "dma";
|
|
ti,hwmods = "usb_otg_hs";
|
|
multipoint = <1>;
|
|
num-eps = <16>;
|
|
ram-bits = <12>;
|
|
};
|
|
};
|
|
};
|