forked from Minki/linux
56ea37da3b
Device stopped to tuning some channels after regmap conversion.
Reason is that regmap_update_bits() works a bit differently for
partially volatile registers than old homemade routine. Return
back to old routine in order to fix issue.
Fixes: 478932b160
Cc: <stable@kernel.org> # 4.2+
Reported-by: Mark Clarkstone <hello@markclarkstone.co.uk>
Tested-by: Mark Clarkstone <hello@markclarkstone.co.uk>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
1534 lines
34 KiB
C
1534 lines
34 KiB
C
/*
|
|
* Montage Technology M88DS3103/M88RS6000 demodulator driver
|
|
*
|
|
* Copyright (C) 2013 Antti Palosaari <crope@iki.fi>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include "m88ds3103_priv.h"
|
|
|
|
static struct dvb_frontend_ops m88ds3103_ops;
|
|
|
|
/* write single register with mask */
|
|
static int m88ds3103_update_bits(struct m88ds3103_dev *dev,
|
|
u8 reg, u8 mask, u8 val)
|
|
{
|
|
int ret;
|
|
u8 tmp;
|
|
|
|
/* no need for read if whole reg is written */
|
|
if (mask != 0xff) {
|
|
ret = regmap_bulk_read(dev->regmap, reg, &tmp, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val &= mask;
|
|
tmp &= ~mask;
|
|
val |= tmp;
|
|
}
|
|
|
|
return regmap_bulk_write(dev->regmap, reg, &val, 1);
|
|
}
|
|
|
|
/* write reg val table using reg addr auto increment */
|
|
static int m88ds3103_wr_reg_val_tab(struct m88ds3103_dev *dev,
|
|
const struct m88ds3103_reg_val *tab, int tab_len)
|
|
{
|
|
struct i2c_client *client = dev->client;
|
|
int ret, i, j;
|
|
u8 buf[83];
|
|
|
|
dev_dbg(&client->dev, "tab_len=%d\n", tab_len);
|
|
|
|
if (tab_len > 86) {
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
for (i = 0, j = 0; i < tab_len; i++, j++) {
|
|
buf[j] = tab[i].val;
|
|
|
|
if (i == tab_len - 1 || tab[i].reg != tab[i + 1].reg - 1 ||
|
|
!((j + 1) % (dev->cfg->i2c_wr_max - 1))) {
|
|
ret = regmap_bulk_write(dev->regmap, tab[i].reg - j, buf, j + 1);
|
|
if (ret)
|
|
goto err;
|
|
|
|
j = -1;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Get the demodulator AGC PWM voltage setting supplied to the tuner.
|
|
*/
|
|
int m88ds3103_get_agc_pwm(struct dvb_frontend *fe, u8 *_agc_pwm)
|
|
{
|
|
struct m88ds3103_dev *dev = fe->demodulator_priv;
|
|
unsigned tmp;
|
|
int ret;
|
|
|
|
ret = regmap_read(dev->regmap, 0x3f, &tmp);
|
|
if (ret == 0)
|
|
*_agc_pwm = tmp;
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(m88ds3103_get_agc_pwm);
|
|
|
|
static int m88ds3103_read_status(struct dvb_frontend *fe,
|
|
enum fe_status *status)
|
|
{
|
|
struct m88ds3103_dev *dev = fe->demodulator_priv;
|
|
struct i2c_client *client = dev->client;
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
int ret, i, itmp;
|
|
unsigned int utmp;
|
|
u8 buf[3];
|
|
|
|
*status = 0;
|
|
|
|
if (!dev->warm) {
|
|
ret = -EAGAIN;
|
|
goto err;
|
|
}
|
|
|
|
switch (c->delivery_system) {
|
|
case SYS_DVBS:
|
|
ret = regmap_read(dev->regmap, 0xd1, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if ((utmp & 0x07) == 0x07)
|
|
*status = FE_HAS_SIGNAL | FE_HAS_CARRIER |
|
|
FE_HAS_VITERBI | FE_HAS_SYNC |
|
|
FE_HAS_LOCK;
|
|
break;
|
|
case SYS_DVBS2:
|
|
ret = regmap_read(dev->regmap, 0x0d, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if ((utmp & 0x8f) == 0x8f)
|
|
*status = FE_HAS_SIGNAL | FE_HAS_CARRIER |
|
|
FE_HAS_VITERBI | FE_HAS_SYNC |
|
|
FE_HAS_LOCK;
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid delivery_system\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
dev->fe_status = *status;
|
|
dev_dbg(&client->dev, "lock=%02x status=%02x\n", utmp, *status);
|
|
|
|
/* CNR */
|
|
if (dev->fe_status & FE_HAS_VITERBI) {
|
|
unsigned int cnr, noise, signal, noise_tot, signal_tot;
|
|
|
|
cnr = 0;
|
|
/* more iterations for more accurate estimation */
|
|
#define M88DS3103_SNR_ITERATIONS 3
|
|
|
|
switch (c->delivery_system) {
|
|
case SYS_DVBS:
|
|
itmp = 0;
|
|
|
|
for (i = 0; i < M88DS3103_SNR_ITERATIONS; i++) {
|
|
ret = regmap_read(dev->regmap, 0xff, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
itmp += utmp;
|
|
}
|
|
|
|
/* use of single register limits max value to 15 dB */
|
|
/* SNR(X) dB = 10 * ln(X) / ln(10) dB */
|
|
itmp = DIV_ROUND_CLOSEST(itmp, 8 * M88DS3103_SNR_ITERATIONS);
|
|
if (itmp)
|
|
cnr = div_u64((u64) 10000 * intlog2(itmp), intlog2(10));
|
|
break;
|
|
case SYS_DVBS2:
|
|
noise_tot = 0;
|
|
signal_tot = 0;
|
|
|
|
for (i = 0; i < M88DS3103_SNR_ITERATIONS; i++) {
|
|
ret = regmap_bulk_read(dev->regmap, 0x8c, buf, 3);
|
|
if (ret)
|
|
goto err;
|
|
|
|
noise = buf[1] << 6; /* [13:6] */
|
|
noise |= buf[0] & 0x3f; /* [5:0] */
|
|
noise >>= 2;
|
|
signal = buf[2] * buf[2];
|
|
signal >>= 1;
|
|
|
|
noise_tot += noise;
|
|
signal_tot += signal;
|
|
}
|
|
|
|
noise = noise_tot / M88DS3103_SNR_ITERATIONS;
|
|
signal = signal_tot / M88DS3103_SNR_ITERATIONS;
|
|
|
|
/* SNR(X) dB = 10 * log10(X) dB */
|
|
if (signal > noise) {
|
|
itmp = signal / noise;
|
|
cnr = div_u64((u64) 10000 * intlog10(itmp), (1 << 24));
|
|
}
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid delivery_system\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
if (cnr) {
|
|
c->cnr.stat[0].scale = FE_SCALE_DECIBEL;
|
|
c->cnr.stat[0].svalue = cnr;
|
|
} else {
|
|
c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
}
|
|
} else {
|
|
c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
}
|
|
|
|
/* BER */
|
|
if (dev->fe_status & FE_HAS_LOCK) {
|
|
unsigned int utmp, post_bit_error, post_bit_count;
|
|
|
|
switch (c->delivery_system) {
|
|
case SYS_DVBS:
|
|
ret = regmap_write(dev->regmap, 0xf9, 0x04);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_read(dev->regmap, 0xf8, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* measurement ready? */
|
|
if (!(utmp & 0x10)) {
|
|
ret = regmap_bulk_read(dev->regmap, 0xf6, buf, 2);
|
|
if (ret)
|
|
goto err;
|
|
|
|
post_bit_error = buf[1] << 8 | buf[0] << 0;
|
|
post_bit_count = 0x800000;
|
|
dev->post_bit_error += post_bit_error;
|
|
dev->post_bit_count += post_bit_count;
|
|
dev->dvbv3_ber = post_bit_error;
|
|
|
|
/* restart measurement */
|
|
utmp |= 0x10;
|
|
ret = regmap_write(dev->regmap, 0xf8, utmp);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
break;
|
|
case SYS_DVBS2:
|
|
ret = regmap_bulk_read(dev->regmap, 0xd5, buf, 3);
|
|
if (ret)
|
|
goto err;
|
|
|
|
utmp = buf[2] << 16 | buf[1] << 8 | buf[0] << 0;
|
|
|
|
/* enough data? */
|
|
if (utmp > 4000) {
|
|
ret = regmap_bulk_read(dev->regmap, 0xf7, buf, 2);
|
|
if (ret)
|
|
goto err;
|
|
|
|
post_bit_error = buf[1] << 8 | buf[0] << 0;
|
|
post_bit_count = 32 * utmp; /* TODO: FEC */
|
|
dev->post_bit_error += post_bit_error;
|
|
dev->post_bit_count += post_bit_count;
|
|
dev->dvbv3_ber = post_bit_error;
|
|
|
|
/* restart measurement */
|
|
ret = regmap_write(dev->regmap, 0xd1, 0x01);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(dev->regmap, 0xf9, 0x01);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(dev->regmap, 0xf9, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(dev->regmap, 0xd1, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid delivery_system\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER;
|
|
c->post_bit_error.stat[0].uvalue = dev->post_bit_error;
|
|
c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER;
|
|
c->post_bit_count.stat[0].uvalue = dev->post_bit_count;
|
|
} else {
|
|
c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int m88ds3103_set_frontend(struct dvb_frontend *fe)
|
|
{
|
|
struct m88ds3103_dev *dev = fe->demodulator_priv;
|
|
struct i2c_client *client = dev->client;
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
int ret, len;
|
|
const struct m88ds3103_reg_val *init;
|
|
u8 u8tmp, u8tmp1 = 0, u8tmp2 = 0; /* silence compiler warning */
|
|
u8 buf[3];
|
|
u16 u16tmp, divide_ratio = 0;
|
|
u32 tuner_frequency, target_mclk;
|
|
s32 s32tmp;
|
|
|
|
dev_dbg(&client->dev,
|
|
"delivery_system=%d modulation=%d frequency=%u symbol_rate=%d inversion=%d pilot=%d rolloff=%d\n",
|
|
c->delivery_system, c->modulation, c->frequency, c->symbol_rate,
|
|
c->inversion, c->pilot, c->rolloff);
|
|
|
|
if (!dev->warm) {
|
|
ret = -EAGAIN;
|
|
goto err;
|
|
}
|
|
|
|
/* reset */
|
|
ret = regmap_write(dev->regmap, 0x07, 0x80);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(dev->regmap, 0x07, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* Disable demod clock path */
|
|
if (dev->chip_id == M88RS6000_CHIP_ID) {
|
|
ret = regmap_write(dev->regmap, 0x06, 0xe0);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
/* program tuner */
|
|
if (fe->ops.tuner_ops.set_params) {
|
|
ret = fe->ops.tuner_ops.set_params(fe);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
if (fe->ops.tuner_ops.get_frequency) {
|
|
ret = fe->ops.tuner_ops.get_frequency(fe, &tuner_frequency);
|
|
if (ret)
|
|
goto err;
|
|
} else {
|
|
/*
|
|
* Use nominal target frequency as tuner driver does not provide
|
|
* actual frequency used. Carrier offset calculation is not
|
|
* valid.
|
|
*/
|
|
tuner_frequency = c->frequency;
|
|
}
|
|
|
|
/* select M88RS6000 demod main mclk and ts mclk from tuner die. */
|
|
if (dev->chip_id == M88RS6000_CHIP_ID) {
|
|
if (c->symbol_rate > 45010000)
|
|
dev->mclk_khz = 110250;
|
|
else
|
|
dev->mclk_khz = 96000;
|
|
|
|
if (c->delivery_system == SYS_DVBS)
|
|
target_mclk = 96000;
|
|
else
|
|
target_mclk = 144000;
|
|
|
|
/* Enable demod clock path */
|
|
ret = regmap_write(dev->regmap, 0x06, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
usleep_range(10000, 20000);
|
|
} else {
|
|
/* set M88DS3103 mclk and ts mclk. */
|
|
dev->mclk_khz = 96000;
|
|
|
|
switch (dev->cfg->ts_mode) {
|
|
case M88DS3103_TS_SERIAL:
|
|
case M88DS3103_TS_SERIAL_D7:
|
|
target_mclk = dev->cfg->ts_clk;
|
|
break;
|
|
case M88DS3103_TS_PARALLEL:
|
|
case M88DS3103_TS_CI:
|
|
if (c->delivery_system == SYS_DVBS)
|
|
target_mclk = 96000;
|
|
else {
|
|
if (c->symbol_rate < 18000000)
|
|
target_mclk = 96000;
|
|
else if (c->symbol_rate < 28000000)
|
|
target_mclk = 144000;
|
|
else
|
|
target_mclk = 192000;
|
|
}
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid ts_mode\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
switch (target_mclk) {
|
|
case 96000:
|
|
u8tmp1 = 0x02; /* 0b10 */
|
|
u8tmp2 = 0x01; /* 0b01 */
|
|
break;
|
|
case 144000:
|
|
u8tmp1 = 0x00; /* 0b00 */
|
|
u8tmp2 = 0x01; /* 0b01 */
|
|
break;
|
|
case 192000:
|
|
u8tmp1 = 0x03; /* 0b11 */
|
|
u8tmp2 = 0x00; /* 0b00 */
|
|
break;
|
|
}
|
|
ret = m88ds3103_update_bits(dev, 0x22, 0xc0, u8tmp1 << 6);
|
|
if (ret)
|
|
goto err;
|
|
ret = m88ds3103_update_bits(dev, 0x24, 0xc0, u8tmp2 << 6);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
ret = regmap_write(dev->regmap, 0xb2, 0x01);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(dev->regmap, 0x00, 0x01);
|
|
if (ret)
|
|
goto err;
|
|
|
|
switch (c->delivery_system) {
|
|
case SYS_DVBS:
|
|
if (dev->chip_id == M88RS6000_CHIP_ID) {
|
|
len = ARRAY_SIZE(m88rs6000_dvbs_init_reg_vals);
|
|
init = m88rs6000_dvbs_init_reg_vals;
|
|
} else {
|
|
len = ARRAY_SIZE(m88ds3103_dvbs_init_reg_vals);
|
|
init = m88ds3103_dvbs_init_reg_vals;
|
|
}
|
|
break;
|
|
case SYS_DVBS2:
|
|
if (dev->chip_id == M88RS6000_CHIP_ID) {
|
|
len = ARRAY_SIZE(m88rs6000_dvbs2_init_reg_vals);
|
|
init = m88rs6000_dvbs2_init_reg_vals;
|
|
} else {
|
|
len = ARRAY_SIZE(m88ds3103_dvbs2_init_reg_vals);
|
|
init = m88ds3103_dvbs2_init_reg_vals;
|
|
}
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid delivery_system\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
/* program init table */
|
|
if (c->delivery_system != dev->delivery_system) {
|
|
ret = m88ds3103_wr_reg_val_tab(dev, init, len);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
if (dev->chip_id == M88RS6000_CHIP_ID) {
|
|
if ((c->delivery_system == SYS_DVBS2)
|
|
&& ((c->symbol_rate / 1000) <= 5000)) {
|
|
ret = regmap_write(dev->regmap, 0xc0, 0x04);
|
|
if (ret)
|
|
goto err;
|
|
buf[0] = 0x09;
|
|
buf[1] = 0x22;
|
|
buf[2] = 0x88;
|
|
ret = regmap_bulk_write(dev->regmap, 0x8a, buf, 3);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
ret = m88ds3103_update_bits(dev, 0x9d, 0x08, 0x08);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_write(dev->regmap, 0xf1, 0x01);
|
|
if (ret)
|
|
goto err;
|
|
ret = m88ds3103_update_bits(dev, 0x30, 0x80, 0x80);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
switch (dev->cfg->ts_mode) {
|
|
case M88DS3103_TS_SERIAL:
|
|
u8tmp1 = 0x00;
|
|
u8tmp = 0x06;
|
|
break;
|
|
case M88DS3103_TS_SERIAL_D7:
|
|
u8tmp1 = 0x20;
|
|
u8tmp = 0x06;
|
|
break;
|
|
case M88DS3103_TS_PARALLEL:
|
|
u8tmp = 0x02;
|
|
break;
|
|
case M88DS3103_TS_CI:
|
|
u8tmp = 0x03;
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid ts_mode\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
if (dev->cfg->ts_clk_pol)
|
|
u8tmp |= 0x40;
|
|
|
|
/* TS mode */
|
|
ret = regmap_write(dev->regmap, 0xfd, u8tmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
switch (dev->cfg->ts_mode) {
|
|
case M88DS3103_TS_SERIAL:
|
|
case M88DS3103_TS_SERIAL_D7:
|
|
ret = m88ds3103_update_bits(dev, 0x29, 0x20, u8tmp1);
|
|
if (ret)
|
|
goto err;
|
|
u8tmp1 = 0;
|
|
u8tmp2 = 0;
|
|
break;
|
|
default:
|
|
if (dev->cfg->ts_clk) {
|
|
divide_ratio = DIV_ROUND_UP(target_mclk, dev->cfg->ts_clk);
|
|
u8tmp1 = divide_ratio / 2;
|
|
u8tmp2 = DIV_ROUND_UP(divide_ratio, 2);
|
|
}
|
|
}
|
|
|
|
dev_dbg(&client->dev,
|
|
"target_mclk=%d ts_clk=%d divide_ratio=%d\n",
|
|
target_mclk, dev->cfg->ts_clk, divide_ratio);
|
|
|
|
u8tmp1--;
|
|
u8tmp2--;
|
|
/* u8tmp1[5:2] => fe[3:0], u8tmp1[1:0] => ea[7:6] */
|
|
u8tmp1 &= 0x3f;
|
|
/* u8tmp2[5:0] => ea[5:0] */
|
|
u8tmp2 &= 0x3f;
|
|
|
|
ret = regmap_bulk_read(dev->regmap, 0xfe, &u8tmp, 1);
|
|
if (ret)
|
|
goto err;
|
|
|
|
u8tmp = ((u8tmp & 0xf0) << 0) | u8tmp1 >> 2;
|
|
ret = regmap_write(dev->regmap, 0xfe, u8tmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
u8tmp = ((u8tmp1 & 0x03) << 6) | u8tmp2 >> 0;
|
|
ret = regmap_write(dev->regmap, 0xea, u8tmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (c->symbol_rate <= 3000000)
|
|
u8tmp = 0x20;
|
|
else if (c->symbol_rate <= 10000000)
|
|
u8tmp = 0x10;
|
|
else
|
|
u8tmp = 0x06;
|
|
|
|
ret = regmap_write(dev->regmap, 0xc3, 0x08);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(dev->regmap, 0xc8, u8tmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(dev->regmap, 0xc4, 0x08);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(dev->regmap, 0xc7, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
u16tmp = DIV_ROUND_CLOSEST((c->symbol_rate / 1000) << 15, dev->mclk_khz / 2);
|
|
buf[0] = (u16tmp >> 0) & 0xff;
|
|
buf[1] = (u16tmp >> 8) & 0xff;
|
|
ret = regmap_bulk_write(dev->regmap, 0x61, buf, 2);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = m88ds3103_update_bits(dev, 0x4d, 0x02, dev->cfg->spec_inv << 1);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = m88ds3103_update_bits(dev, 0x30, 0x10, dev->cfg->agc_inv << 4);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(dev->regmap, 0x33, dev->cfg->agc);
|
|
if (ret)
|
|
goto err;
|
|
|
|
dev_dbg(&client->dev, "carrier offset=%d\n",
|
|
(tuner_frequency - c->frequency));
|
|
|
|
s32tmp = 0x10000 * (tuner_frequency - c->frequency);
|
|
s32tmp = DIV_ROUND_CLOSEST(s32tmp, dev->mclk_khz);
|
|
if (s32tmp < 0)
|
|
s32tmp += 0x10000;
|
|
|
|
buf[0] = (s32tmp >> 0) & 0xff;
|
|
buf[1] = (s32tmp >> 8) & 0xff;
|
|
ret = regmap_bulk_write(dev->regmap, 0x5e, buf, 2);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(dev->regmap, 0x00, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(dev->regmap, 0xb2, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
dev->delivery_system = c->delivery_system;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int m88ds3103_init(struct dvb_frontend *fe)
|
|
{
|
|
struct m88ds3103_dev *dev = fe->demodulator_priv;
|
|
struct i2c_client *client = dev->client;
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
int ret, len, remaining;
|
|
unsigned int utmp;
|
|
const struct firmware *fw = NULL;
|
|
u8 *fw_file;
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
/* set cold state by default */
|
|
dev->warm = false;
|
|
|
|
/* wake up device from sleep */
|
|
ret = m88ds3103_update_bits(dev, 0x08, 0x01, 0x01);
|
|
if (ret)
|
|
goto err;
|
|
ret = m88ds3103_update_bits(dev, 0x04, 0x01, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
ret = m88ds3103_update_bits(dev, 0x23, 0x10, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* firmware status */
|
|
ret = regmap_read(dev->regmap, 0xb9, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
dev_dbg(&client->dev, "firmware=%02x\n", utmp);
|
|
|
|
if (utmp)
|
|
goto skip_fw_download;
|
|
|
|
/* global reset, global diseqc reset, golbal fec reset */
|
|
ret = regmap_write(dev->regmap, 0x07, 0xe0);
|
|
if (ret)
|
|
goto err;
|
|
ret = regmap_write(dev->regmap, 0x07, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* cold state - try to download firmware */
|
|
dev_info(&client->dev, "found a '%s' in cold state\n",
|
|
m88ds3103_ops.info.name);
|
|
|
|
if (dev->chip_id == M88RS6000_CHIP_ID)
|
|
fw_file = M88RS6000_FIRMWARE;
|
|
else
|
|
fw_file = M88DS3103_FIRMWARE;
|
|
/* request the firmware, this will block and timeout */
|
|
ret = request_firmware(&fw, fw_file, &client->dev);
|
|
if (ret) {
|
|
dev_err(&client->dev, "firmare file '%s' not found\n", fw_file);
|
|
goto err;
|
|
}
|
|
|
|
dev_info(&client->dev, "downloading firmware from file '%s'\n",
|
|
fw_file);
|
|
|
|
ret = regmap_write(dev->regmap, 0xb2, 0x01);
|
|
if (ret)
|
|
goto error_fw_release;
|
|
|
|
for (remaining = fw->size; remaining > 0;
|
|
remaining -= (dev->cfg->i2c_wr_max - 1)) {
|
|
len = remaining;
|
|
if (len > (dev->cfg->i2c_wr_max - 1))
|
|
len = (dev->cfg->i2c_wr_max - 1);
|
|
|
|
ret = regmap_bulk_write(dev->regmap, 0xb0,
|
|
&fw->data[fw->size - remaining], len);
|
|
if (ret) {
|
|
dev_err(&client->dev, "firmware download failed=%d\n",
|
|
ret);
|
|
goto error_fw_release;
|
|
}
|
|
}
|
|
|
|
ret = regmap_write(dev->regmap, 0xb2, 0x00);
|
|
if (ret)
|
|
goto error_fw_release;
|
|
|
|
release_firmware(fw);
|
|
fw = NULL;
|
|
|
|
ret = regmap_read(dev->regmap, 0xb9, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (!utmp) {
|
|
dev_info(&client->dev, "firmware did not run\n");
|
|
ret = -EFAULT;
|
|
goto err;
|
|
}
|
|
|
|
dev_info(&client->dev, "found a '%s' in warm state\n",
|
|
m88ds3103_ops.info.name);
|
|
dev_info(&client->dev, "firmware version: %X.%X\n",
|
|
(utmp >> 4) & 0xf, (utmp >> 0 & 0xf));
|
|
|
|
skip_fw_download:
|
|
/* warm state */
|
|
dev->warm = true;
|
|
|
|
/* init stats here in order signal app which stats are supported */
|
|
c->cnr.len = 1;
|
|
c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
c->post_bit_error.len = 1;
|
|
c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
c->post_bit_count.len = 1;
|
|
c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
|
|
|
|
return 0;
|
|
error_fw_release:
|
|
release_firmware(fw);
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int m88ds3103_sleep(struct dvb_frontend *fe)
|
|
{
|
|
struct m88ds3103_dev *dev = fe->demodulator_priv;
|
|
struct i2c_client *client = dev->client;
|
|
int ret;
|
|
unsigned int utmp;
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
dev->fe_status = 0;
|
|
dev->delivery_system = SYS_UNDEFINED;
|
|
|
|
/* TS Hi-Z */
|
|
if (dev->chip_id == M88RS6000_CHIP_ID)
|
|
utmp = 0x29;
|
|
else
|
|
utmp = 0x27;
|
|
ret = m88ds3103_update_bits(dev, utmp, 0x01, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* sleep */
|
|
ret = m88ds3103_update_bits(dev, 0x08, 0x01, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
ret = m88ds3103_update_bits(dev, 0x04, 0x01, 0x01);
|
|
if (ret)
|
|
goto err;
|
|
ret = m88ds3103_update_bits(dev, 0x23, 0x10, 0x10);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int m88ds3103_get_frontend(struct dvb_frontend *fe)
|
|
{
|
|
struct m88ds3103_dev *dev = fe->demodulator_priv;
|
|
struct i2c_client *client = dev->client;
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
int ret;
|
|
u8 buf[3];
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
if (!dev->warm || !(dev->fe_status & FE_HAS_LOCK)) {
|
|
ret = 0;
|
|
goto err;
|
|
}
|
|
|
|
switch (c->delivery_system) {
|
|
case SYS_DVBS:
|
|
ret = regmap_bulk_read(dev->regmap, 0xe0, &buf[0], 1);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_bulk_read(dev->regmap, 0xe6, &buf[1], 1);
|
|
if (ret)
|
|
goto err;
|
|
|
|
switch ((buf[0] >> 2) & 0x01) {
|
|
case 0:
|
|
c->inversion = INVERSION_OFF;
|
|
break;
|
|
case 1:
|
|
c->inversion = INVERSION_ON;
|
|
break;
|
|
}
|
|
|
|
switch ((buf[1] >> 5) & 0x07) {
|
|
case 0:
|
|
c->fec_inner = FEC_7_8;
|
|
break;
|
|
case 1:
|
|
c->fec_inner = FEC_5_6;
|
|
break;
|
|
case 2:
|
|
c->fec_inner = FEC_3_4;
|
|
break;
|
|
case 3:
|
|
c->fec_inner = FEC_2_3;
|
|
break;
|
|
case 4:
|
|
c->fec_inner = FEC_1_2;
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid fec_inner\n");
|
|
}
|
|
|
|
c->modulation = QPSK;
|
|
|
|
break;
|
|
case SYS_DVBS2:
|
|
ret = regmap_bulk_read(dev->regmap, 0x7e, &buf[0], 1);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_bulk_read(dev->regmap, 0x89, &buf[1], 1);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_bulk_read(dev->regmap, 0xf2, &buf[2], 1);
|
|
if (ret)
|
|
goto err;
|
|
|
|
switch ((buf[0] >> 0) & 0x0f) {
|
|
case 2:
|
|
c->fec_inner = FEC_2_5;
|
|
break;
|
|
case 3:
|
|
c->fec_inner = FEC_1_2;
|
|
break;
|
|
case 4:
|
|
c->fec_inner = FEC_3_5;
|
|
break;
|
|
case 5:
|
|
c->fec_inner = FEC_2_3;
|
|
break;
|
|
case 6:
|
|
c->fec_inner = FEC_3_4;
|
|
break;
|
|
case 7:
|
|
c->fec_inner = FEC_4_5;
|
|
break;
|
|
case 8:
|
|
c->fec_inner = FEC_5_6;
|
|
break;
|
|
case 9:
|
|
c->fec_inner = FEC_8_9;
|
|
break;
|
|
case 10:
|
|
c->fec_inner = FEC_9_10;
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid fec_inner\n");
|
|
}
|
|
|
|
switch ((buf[0] >> 5) & 0x01) {
|
|
case 0:
|
|
c->pilot = PILOT_OFF;
|
|
break;
|
|
case 1:
|
|
c->pilot = PILOT_ON;
|
|
break;
|
|
}
|
|
|
|
switch ((buf[0] >> 6) & 0x07) {
|
|
case 0:
|
|
c->modulation = QPSK;
|
|
break;
|
|
case 1:
|
|
c->modulation = PSK_8;
|
|
break;
|
|
case 2:
|
|
c->modulation = APSK_16;
|
|
break;
|
|
case 3:
|
|
c->modulation = APSK_32;
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid modulation\n");
|
|
}
|
|
|
|
switch ((buf[1] >> 7) & 0x01) {
|
|
case 0:
|
|
c->inversion = INVERSION_OFF;
|
|
break;
|
|
case 1:
|
|
c->inversion = INVERSION_ON;
|
|
break;
|
|
}
|
|
|
|
switch ((buf[2] >> 0) & 0x03) {
|
|
case 0:
|
|
c->rolloff = ROLLOFF_35;
|
|
break;
|
|
case 1:
|
|
c->rolloff = ROLLOFF_25;
|
|
break;
|
|
case 2:
|
|
c->rolloff = ROLLOFF_20;
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid rolloff\n");
|
|
}
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid delivery_system\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
ret = regmap_bulk_read(dev->regmap, 0x6d, buf, 2);
|
|
if (ret)
|
|
goto err;
|
|
|
|
c->symbol_rate = 1ull * ((buf[1] << 8) | (buf[0] << 0)) *
|
|
dev->mclk_khz * 1000 / 0x10000;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int m88ds3103_read_snr(struct dvb_frontend *fe, u16 *snr)
|
|
{
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
|
|
if (c->cnr.stat[0].scale == FE_SCALE_DECIBEL)
|
|
*snr = div_s64(c->cnr.stat[0].svalue, 100);
|
|
else
|
|
*snr = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int m88ds3103_read_ber(struct dvb_frontend *fe, u32 *ber)
|
|
{
|
|
struct m88ds3103_dev *dev = fe->demodulator_priv;
|
|
|
|
*ber = dev->dvbv3_ber;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int m88ds3103_set_tone(struct dvb_frontend *fe,
|
|
enum fe_sec_tone_mode fe_sec_tone_mode)
|
|
{
|
|
struct m88ds3103_dev *dev = fe->demodulator_priv;
|
|
struct i2c_client *client = dev->client;
|
|
int ret;
|
|
unsigned int utmp, tone, reg_a1_mask;
|
|
|
|
dev_dbg(&client->dev, "fe_sec_tone_mode=%d\n", fe_sec_tone_mode);
|
|
|
|
if (!dev->warm) {
|
|
ret = -EAGAIN;
|
|
goto err;
|
|
}
|
|
|
|
switch (fe_sec_tone_mode) {
|
|
case SEC_TONE_ON:
|
|
tone = 0;
|
|
reg_a1_mask = 0x47;
|
|
break;
|
|
case SEC_TONE_OFF:
|
|
tone = 1;
|
|
reg_a1_mask = 0x00;
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid fe_sec_tone_mode\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
utmp = tone << 7 | dev->cfg->envelope_mode << 5;
|
|
ret = m88ds3103_update_bits(dev, 0xa2, 0xe0, utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
utmp = 1 << 2;
|
|
ret = m88ds3103_update_bits(dev, 0xa1, reg_a1_mask, utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int m88ds3103_set_voltage(struct dvb_frontend *fe,
|
|
enum fe_sec_voltage fe_sec_voltage)
|
|
{
|
|
struct m88ds3103_dev *dev = fe->demodulator_priv;
|
|
struct i2c_client *client = dev->client;
|
|
int ret;
|
|
unsigned int utmp;
|
|
bool voltage_sel, voltage_dis;
|
|
|
|
dev_dbg(&client->dev, "fe_sec_voltage=%d\n", fe_sec_voltage);
|
|
|
|
if (!dev->warm) {
|
|
ret = -EAGAIN;
|
|
goto err;
|
|
}
|
|
|
|
switch (fe_sec_voltage) {
|
|
case SEC_VOLTAGE_18:
|
|
voltage_sel = true;
|
|
voltage_dis = false;
|
|
break;
|
|
case SEC_VOLTAGE_13:
|
|
voltage_sel = false;
|
|
voltage_dis = false;
|
|
break;
|
|
case SEC_VOLTAGE_OFF:
|
|
voltage_sel = false;
|
|
voltage_dis = true;
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid fe_sec_voltage\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
/* output pin polarity */
|
|
voltage_sel ^= dev->cfg->lnb_hv_pol;
|
|
voltage_dis ^= dev->cfg->lnb_en_pol;
|
|
|
|
utmp = voltage_dis << 1 | voltage_sel << 0;
|
|
ret = m88ds3103_update_bits(dev, 0xa2, 0x03, utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int m88ds3103_diseqc_send_master_cmd(struct dvb_frontend *fe,
|
|
struct dvb_diseqc_master_cmd *diseqc_cmd)
|
|
{
|
|
struct m88ds3103_dev *dev = fe->demodulator_priv;
|
|
struct i2c_client *client = dev->client;
|
|
int ret;
|
|
unsigned int utmp;
|
|
unsigned long timeout;
|
|
|
|
dev_dbg(&client->dev, "msg=%*ph\n",
|
|
diseqc_cmd->msg_len, diseqc_cmd->msg);
|
|
|
|
if (!dev->warm) {
|
|
ret = -EAGAIN;
|
|
goto err;
|
|
}
|
|
|
|
if (diseqc_cmd->msg_len < 3 || diseqc_cmd->msg_len > 6) {
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
utmp = dev->cfg->envelope_mode << 5;
|
|
ret = m88ds3103_update_bits(dev, 0xa2, 0xe0, utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_bulk_write(dev->regmap, 0xa3, diseqc_cmd->msg,
|
|
diseqc_cmd->msg_len);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(dev->regmap, 0xa1,
|
|
(diseqc_cmd->msg_len - 1) << 3 | 0x07);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* wait DiSEqC TX ready */
|
|
#define SEND_MASTER_CMD_TIMEOUT 120
|
|
timeout = jiffies + msecs_to_jiffies(SEND_MASTER_CMD_TIMEOUT);
|
|
|
|
/* DiSEqC message typical period is 54 ms */
|
|
usleep_range(50000, 54000);
|
|
|
|
for (utmp = 1; !time_after(jiffies, timeout) && utmp;) {
|
|
ret = regmap_read(dev->regmap, 0xa1, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
utmp = (utmp >> 6) & 0x1;
|
|
}
|
|
|
|
if (utmp == 0) {
|
|
dev_dbg(&client->dev, "diseqc tx took %u ms\n",
|
|
jiffies_to_msecs(jiffies) -
|
|
(jiffies_to_msecs(timeout) - SEND_MASTER_CMD_TIMEOUT));
|
|
} else {
|
|
dev_dbg(&client->dev, "diseqc tx timeout\n");
|
|
|
|
ret = m88ds3103_update_bits(dev, 0xa1, 0xc0, 0x40);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
ret = m88ds3103_update_bits(dev, 0xa2, 0xc0, 0x80);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (utmp == 1) {
|
|
ret = -ETIMEDOUT;
|
|
goto err;
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int m88ds3103_diseqc_send_burst(struct dvb_frontend *fe,
|
|
enum fe_sec_mini_cmd fe_sec_mini_cmd)
|
|
{
|
|
struct m88ds3103_dev *dev = fe->demodulator_priv;
|
|
struct i2c_client *client = dev->client;
|
|
int ret;
|
|
unsigned int utmp, burst;
|
|
unsigned long timeout;
|
|
|
|
dev_dbg(&client->dev, "fe_sec_mini_cmd=%d\n", fe_sec_mini_cmd);
|
|
|
|
if (!dev->warm) {
|
|
ret = -EAGAIN;
|
|
goto err;
|
|
}
|
|
|
|
utmp = dev->cfg->envelope_mode << 5;
|
|
ret = m88ds3103_update_bits(dev, 0xa2, 0xe0, utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
switch (fe_sec_mini_cmd) {
|
|
case SEC_MINI_A:
|
|
burst = 0x02;
|
|
break;
|
|
case SEC_MINI_B:
|
|
burst = 0x01;
|
|
break;
|
|
default:
|
|
dev_dbg(&client->dev, "invalid fe_sec_mini_cmd\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
ret = regmap_write(dev->regmap, 0xa1, burst);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* wait DiSEqC TX ready */
|
|
#define SEND_BURST_TIMEOUT 40
|
|
timeout = jiffies + msecs_to_jiffies(SEND_BURST_TIMEOUT);
|
|
|
|
/* DiSEqC ToneBurst period is 12.5 ms */
|
|
usleep_range(8500, 12500);
|
|
|
|
for (utmp = 1; !time_after(jiffies, timeout) && utmp;) {
|
|
ret = regmap_read(dev->regmap, 0xa1, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
utmp = (utmp >> 6) & 0x1;
|
|
}
|
|
|
|
if (utmp == 0) {
|
|
dev_dbg(&client->dev, "diseqc tx took %u ms\n",
|
|
jiffies_to_msecs(jiffies) -
|
|
(jiffies_to_msecs(timeout) - SEND_BURST_TIMEOUT));
|
|
} else {
|
|
dev_dbg(&client->dev, "diseqc tx timeout\n");
|
|
|
|
ret = m88ds3103_update_bits(dev, 0xa1, 0xc0, 0x40);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
ret = m88ds3103_update_bits(dev, 0xa2, 0xc0, 0x80);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (utmp == 1) {
|
|
ret = -ETIMEDOUT;
|
|
goto err;
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int m88ds3103_get_tune_settings(struct dvb_frontend *fe,
|
|
struct dvb_frontend_tune_settings *s)
|
|
{
|
|
s->min_delay_ms = 3000;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void m88ds3103_release(struct dvb_frontend *fe)
|
|
{
|
|
struct m88ds3103_dev *dev = fe->demodulator_priv;
|
|
struct i2c_client *client = dev->client;
|
|
|
|
i2c_unregister_device(client);
|
|
}
|
|
|
|
static int m88ds3103_select(struct i2c_adapter *adap, void *mux_priv, u32 chan)
|
|
{
|
|
struct m88ds3103_dev *dev = mux_priv;
|
|
struct i2c_client *client = dev->client;
|
|
int ret;
|
|
struct i2c_msg msg = {
|
|
.addr = client->addr,
|
|
.flags = 0,
|
|
.len = 2,
|
|
.buf = "\x03\x11",
|
|
};
|
|
|
|
/* Open tuner I2C repeater for 1 xfer, closes automatically */
|
|
ret = __i2c_transfer(client->adapter, &msg, 1);
|
|
if (ret != 1) {
|
|
dev_warn(&client->dev, "i2c wr failed=%d\n", ret);
|
|
if (ret >= 0)
|
|
ret = -EREMOTEIO;
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* XXX: That is wrapper to m88ds3103_probe() via driver core in order to provide
|
|
* proper I2C client for legacy media attach binding.
|
|
* New users must use I2C client binding directly!
|
|
*/
|
|
struct dvb_frontend *m88ds3103_attach(const struct m88ds3103_config *cfg,
|
|
struct i2c_adapter *i2c, struct i2c_adapter **tuner_i2c_adapter)
|
|
{
|
|
struct i2c_client *client;
|
|
struct i2c_board_info board_info;
|
|
struct m88ds3103_platform_data pdata;
|
|
|
|
pdata.clk = cfg->clock;
|
|
pdata.i2c_wr_max = cfg->i2c_wr_max;
|
|
pdata.ts_mode = cfg->ts_mode;
|
|
pdata.ts_clk = cfg->ts_clk;
|
|
pdata.ts_clk_pol = cfg->ts_clk_pol;
|
|
pdata.spec_inv = cfg->spec_inv;
|
|
pdata.agc = cfg->agc;
|
|
pdata.agc_inv = cfg->agc_inv;
|
|
pdata.clk_out = cfg->clock_out;
|
|
pdata.envelope_mode = cfg->envelope_mode;
|
|
pdata.lnb_hv_pol = cfg->lnb_hv_pol;
|
|
pdata.lnb_en_pol = cfg->lnb_en_pol;
|
|
pdata.attach_in_use = true;
|
|
|
|
memset(&board_info, 0, sizeof(board_info));
|
|
strlcpy(board_info.type, "m88ds3103", I2C_NAME_SIZE);
|
|
board_info.addr = cfg->i2c_addr;
|
|
board_info.platform_data = &pdata;
|
|
client = i2c_new_device(i2c, &board_info);
|
|
if (!client || !client->dev.driver)
|
|
return NULL;
|
|
|
|
*tuner_i2c_adapter = pdata.get_i2c_adapter(client);
|
|
return pdata.get_dvb_frontend(client);
|
|
}
|
|
EXPORT_SYMBOL(m88ds3103_attach);
|
|
|
|
static struct dvb_frontend_ops m88ds3103_ops = {
|
|
.delsys = {SYS_DVBS, SYS_DVBS2},
|
|
.info = {
|
|
.name = "Montage Technology M88DS3103",
|
|
.frequency_min = 950000,
|
|
.frequency_max = 2150000,
|
|
.frequency_tolerance = 5000,
|
|
.symbol_rate_min = 1000000,
|
|
.symbol_rate_max = 45000000,
|
|
.caps = FE_CAN_INVERSION_AUTO |
|
|
FE_CAN_FEC_1_2 |
|
|
FE_CAN_FEC_2_3 |
|
|
FE_CAN_FEC_3_4 |
|
|
FE_CAN_FEC_4_5 |
|
|
FE_CAN_FEC_5_6 |
|
|
FE_CAN_FEC_6_7 |
|
|
FE_CAN_FEC_7_8 |
|
|
FE_CAN_FEC_8_9 |
|
|
FE_CAN_FEC_AUTO |
|
|
FE_CAN_QPSK |
|
|
FE_CAN_RECOVER |
|
|
FE_CAN_2G_MODULATION
|
|
},
|
|
|
|
.release = m88ds3103_release,
|
|
|
|
.get_tune_settings = m88ds3103_get_tune_settings,
|
|
|
|
.init = m88ds3103_init,
|
|
.sleep = m88ds3103_sleep,
|
|
|
|
.set_frontend = m88ds3103_set_frontend,
|
|
.get_frontend = m88ds3103_get_frontend,
|
|
|
|
.read_status = m88ds3103_read_status,
|
|
.read_snr = m88ds3103_read_snr,
|
|
.read_ber = m88ds3103_read_ber,
|
|
|
|
.diseqc_send_master_cmd = m88ds3103_diseqc_send_master_cmd,
|
|
.diseqc_send_burst = m88ds3103_diseqc_send_burst,
|
|
|
|
.set_tone = m88ds3103_set_tone,
|
|
.set_voltage = m88ds3103_set_voltage,
|
|
};
|
|
|
|
static struct dvb_frontend *m88ds3103_get_dvb_frontend(struct i2c_client *client)
|
|
{
|
|
struct m88ds3103_dev *dev = i2c_get_clientdata(client);
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
return &dev->fe;
|
|
}
|
|
|
|
static struct i2c_adapter *m88ds3103_get_i2c_adapter(struct i2c_client *client)
|
|
{
|
|
struct m88ds3103_dev *dev = i2c_get_clientdata(client);
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
return dev->i2c_adapter;
|
|
}
|
|
|
|
static int m88ds3103_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct m88ds3103_dev *dev;
|
|
struct m88ds3103_platform_data *pdata = client->dev.platform_data;
|
|
int ret;
|
|
unsigned int utmp;
|
|
|
|
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
|
|
if (!dev) {
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
dev->client = client;
|
|
dev->config.clock = pdata->clk;
|
|
dev->config.i2c_wr_max = pdata->i2c_wr_max;
|
|
dev->config.ts_mode = pdata->ts_mode;
|
|
dev->config.ts_clk = pdata->ts_clk;
|
|
dev->config.ts_clk_pol = pdata->ts_clk_pol;
|
|
dev->config.spec_inv = pdata->spec_inv;
|
|
dev->config.agc_inv = pdata->agc_inv;
|
|
dev->config.clock_out = pdata->clk_out;
|
|
dev->config.envelope_mode = pdata->envelope_mode;
|
|
dev->config.agc = pdata->agc;
|
|
dev->config.lnb_hv_pol = pdata->lnb_hv_pol;
|
|
dev->config.lnb_en_pol = pdata->lnb_en_pol;
|
|
dev->cfg = &dev->config;
|
|
/* create regmap */
|
|
dev->regmap_config.reg_bits = 8,
|
|
dev->regmap_config.val_bits = 8,
|
|
dev->regmap_config.lock_arg = dev,
|
|
dev->regmap = devm_regmap_init_i2c(client, &dev->regmap_config);
|
|
if (IS_ERR(dev->regmap)) {
|
|
ret = PTR_ERR(dev->regmap);
|
|
goto err_kfree;
|
|
}
|
|
|
|
/* 0x00: chip id[6:0], 0x01: chip ver[7:0], 0x02: chip ver[15:8] */
|
|
ret = regmap_read(dev->regmap, 0x00, &utmp);
|
|
if (ret)
|
|
goto err_kfree;
|
|
|
|
dev->chip_id = utmp >> 1;
|
|
dev_dbg(&client->dev, "chip_id=%02x\n", dev->chip_id);
|
|
|
|
switch (dev->chip_id) {
|
|
case M88RS6000_CHIP_ID:
|
|
case M88DS3103_CHIP_ID:
|
|
break;
|
|
default:
|
|
goto err_kfree;
|
|
}
|
|
|
|
switch (dev->cfg->clock_out) {
|
|
case M88DS3103_CLOCK_OUT_DISABLED:
|
|
utmp = 0x80;
|
|
break;
|
|
case M88DS3103_CLOCK_OUT_ENABLED:
|
|
utmp = 0x00;
|
|
break;
|
|
case M88DS3103_CLOCK_OUT_ENABLED_DIV2:
|
|
utmp = 0x10;
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
goto err_kfree;
|
|
}
|
|
|
|
/* 0x29 register is defined differently for m88rs6000. */
|
|
/* set internal tuner address to 0x21 */
|
|
if (dev->chip_id == M88RS6000_CHIP_ID)
|
|
utmp = 0x00;
|
|
|
|
ret = regmap_write(dev->regmap, 0x29, utmp);
|
|
if (ret)
|
|
goto err_kfree;
|
|
|
|
/* sleep */
|
|
ret = m88ds3103_update_bits(dev, 0x08, 0x01, 0x00);
|
|
if (ret)
|
|
goto err_kfree;
|
|
ret = m88ds3103_update_bits(dev, 0x04, 0x01, 0x01);
|
|
if (ret)
|
|
goto err_kfree;
|
|
ret = m88ds3103_update_bits(dev, 0x23, 0x10, 0x10);
|
|
if (ret)
|
|
goto err_kfree;
|
|
|
|
/* create mux i2c adapter for tuner */
|
|
dev->i2c_adapter = i2c_add_mux_adapter(client->adapter, &client->dev,
|
|
dev, 0, 0, 0, m88ds3103_select,
|
|
NULL);
|
|
if (dev->i2c_adapter == NULL) {
|
|
ret = -ENOMEM;
|
|
goto err_kfree;
|
|
}
|
|
|
|
/* create dvb_frontend */
|
|
memcpy(&dev->fe.ops, &m88ds3103_ops, sizeof(struct dvb_frontend_ops));
|
|
if (dev->chip_id == M88RS6000_CHIP_ID)
|
|
strncpy(dev->fe.ops.info.name, "Montage Technology M88RS6000",
|
|
sizeof(dev->fe.ops.info.name));
|
|
if (!pdata->attach_in_use)
|
|
dev->fe.ops.release = NULL;
|
|
dev->fe.demodulator_priv = dev;
|
|
i2c_set_clientdata(client, dev);
|
|
|
|
/* setup callbacks */
|
|
pdata->get_dvb_frontend = m88ds3103_get_dvb_frontend;
|
|
pdata->get_i2c_adapter = m88ds3103_get_i2c_adapter;
|
|
return 0;
|
|
err_kfree:
|
|
kfree(dev);
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int m88ds3103_remove(struct i2c_client *client)
|
|
{
|
|
struct m88ds3103_dev *dev = i2c_get_clientdata(client);
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
i2c_del_mux_adapter(dev->i2c_adapter);
|
|
|
|
kfree(dev);
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id m88ds3103_id_table[] = {
|
|
{"m88ds3103", 0},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, m88ds3103_id_table);
|
|
|
|
static struct i2c_driver m88ds3103_driver = {
|
|
.driver = {
|
|
.name = "m88ds3103",
|
|
.suppress_bind_attrs = true,
|
|
},
|
|
.probe = m88ds3103_probe,
|
|
.remove = m88ds3103_remove,
|
|
.id_table = m88ds3103_id_table,
|
|
};
|
|
|
|
module_i2c_driver(m88ds3103_driver);
|
|
|
|
MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
|
|
MODULE_DESCRIPTION("Montage Technology M88DS3103 DVB-S/S2 demodulator driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_FIRMWARE(M88DS3103_FIRMWARE);
|
|
MODULE_FIRMWARE(M88RS6000_FIRMWARE);
|