forked from Minki/linux
7f2da3d76b
Now with the recent addition of WC buffer allocation support, we can use the standard PCM buffer allocation helpers for pxa2xx drivers. This allows us to remove lots of superfluous code. Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210802072815.13551-6-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
893 lines
21 KiB
C
893 lines
21 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* pxa-ssp.c -- ALSA Soc Audio Layer
|
|
*
|
|
* Copyright 2005,2008 Wolfson Microelectronics PLC.
|
|
* Author: Liam Girdwood
|
|
* Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
*
|
|
* TODO:
|
|
* o Test network mode for > 16bit sample size
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/pxa2xx_ssp.h>
|
|
#include <linux/of.h>
|
|
#include <linux/dmaengine.h>
|
|
|
|
#include <asm/irq.h>
|
|
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/pxa2xx-lib.h>
|
|
#include <sound/dmaengine_pcm.h>
|
|
|
|
#include "pxa-ssp.h"
|
|
|
|
/*
|
|
* SSP audio private data
|
|
*/
|
|
struct ssp_priv {
|
|
struct ssp_device *ssp;
|
|
struct clk *extclk;
|
|
unsigned long ssp_clk;
|
|
unsigned int sysclk;
|
|
unsigned int dai_fmt;
|
|
unsigned int configured_dai_fmt;
|
|
#ifdef CONFIG_PM
|
|
uint32_t cr0;
|
|
uint32_t cr1;
|
|
uint32_t to;
|
|
uint32_t psp;
|
|
#endif
|
|
};
|
|
|
|
static void dump_registers(struct ssp_device *ssp)
|
|
{
|
|
dev_dbg(ssp->dev, "SSCR0 0x%08x SSCR1 0x%08x SSTO 0x%08x\n",
|
|
pxa_ssp_read_reg(ssp, SSCR0), pxa_ssp_read_reg(ssp, SSCR1),
|
|
pxa_ssp_read_reg(ssp, SSTO));
|
|
|
|
dev_dbg(ssp->dev, "SSPSP 0x%08x SSSR 0x%08x SSACD 0x%08x\n",
|
|
pxa_ssp_read_reg(ssp, SSPSP), pxa_ssp_read_reg(ssp, SSSR),
|
|
pxa_ssp_read_reg(ssp, SSACD));
|
|
}
|
|
|
|
static void pxa_ssp_set_dma_params(struct ssp_device *ssp, int width4,
|
|
int out, struct snd_dmaengine_dai_dma_data *dma)
|
|
{
|
|
dma->addr_width = width4 ? DMA_SLAVE_BUSWIDTH_4_BYTES :
|
|
DMA_SLAVE_BUSWIDTH_2_BYTES;
|
|
dma->maxburst = 16;
|
|
dma->addr = ssp->phys_base + SSDR;
|
|
}
|
|
|
|
static int pxa_ssp_startup(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *cpu_dai)
|
|
{
|
|
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct ssp_device *ssp = priv->ssp;
|
|
struct snd_dmaengine_dai_dma_data *dma;
|
|
int ret = 0;
|
|
|
|
if (!snd_soc_dai_active(cpu_dai)) {
|
|
clk_prepare_enable(ssp->clk);
|
|
pxa_ssp_disable(ssp);
|
|
}
|
|
|
|
clk_prepare_enable(priv->extclk);
|
|
|
|
dma = kzalloc(sizeof(struct snd_dmaengine_dai_dma_data), GFP_KERNEL);
|
|
if (!dma)
|
|
return -ENOMEM;
|
|
dma->chan_name = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
|
|
"tx" : "rx";
|
|
|
|
snd_soc_dai_set_dma_data(cpu_dai, substream, dma);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void pxa_ssp_shutdown(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *cpu_dai)
|
|
{
|
|
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct ssp_device *ssp = priv->ssp;
|
|
|
|
if (!snd_soc_dai_active(cpu_dai)) {
|
|
pxa_ssp_disable(ssp);
|
|
clk_disable_unprepare(ssp->clk);
|
|
}
|
|
|
|
clk_disable_unprepare(priv->extclk);
|
|
|
|
kfree(snd_soc_dai_get_dma_data(cpu_dai, substream));
|
|
snd_soc_dai_set_dma_data(cpu_dai, substream, NULL);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int pxa_ssp_suspend(struct snd_soc_component *component)
|
|
{
|
|
struct ssp_priv *priv = snd_soc_component_get_drvdata(component);
|
|
struct ssp_device *ssp = priv->ssp;
|
|
|
|
if (!snd_soc_component_active(component))
|
|
clk_prepare_enable(ssp->clk);
|
|
|
|
priv->cr0 = __raw_readl(ssp->mmio_base + SSCR0);
|
|
priv->cr1 = __raw_readl(ssp->mmio_base + SSCR1);
|
|
priv->to = __raw_readl(ssp->mmio_base + SSTO);
|
|
priv->psp = __raw_readl(ssp->mmio_base + SSPSP);
|
|
|
|
pxa_ssp_disable(ssp);
|
|
clk_disable_unprepare(ssp->clk);
|
|
return 0;
|
|
}
|
|
|
|
static int pxa_ssp_resume(struct snd_soc_component *component)
|
|
{
|
|
struct ssp_priv *priv = snd_soc_component_get_drvdata(component);
|
|
struct ssp_device *ssp = priv->ssp;
|
|
uint32_t sssr = SSSR_ROR | SSSR_TUR | SSSR_BCE;
|
|
|
|
clk_prepare_enable(ssp->clk);
|
|
|
|
__raw_writel(sssr, ssp->mmio_base + SSSR);
|
|
__raw_writel(priv->cr0 & ~SSCR0_SSE, ssp->mmio_base + SSCR0);
|
|
__raw_writel(priv->cr1, ssp->mmio_base + SSCR1);
|
|
__raw_writel(priv->to, ssp->mmio_base + SSTO);
|
|
__raw_writel(priv->psp, ssp->mmio_base + SSPSP);
|
|
|
|
if (snd_soc_component_active(component))
|
|
pxa_ssp_enable(ssp);
|
|
else
|
|
clk_disable_unprepare(ssp->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#else
|
|
#define pxa_ssp_suspend NULL
|
|
#define pxa_ssp_resume NULL
|
|
#endif
|
|
|
|
/*
|
|
* ssp_set_clkdiv - set SSP clock divider
|
|
* @div: serial clock rate divider
|
|
*/
|
|
static void pxa_ssp_set_scr(struct ssp_device *ssp, u32 div)
|
|
{
|
|
u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
|
|
|
|
if (ssp->type == PXA25x_SSP) {
|
|
sscr0 &= ~0x0000ff00;
|
|
sscr0 |= ((div - 2)/2) << 8; /* 2..512 */
|
|
} else {
|
|
sscr0 &= ~0x000fff00;
|
|
sscr0 |= (div - 1) << 8; /* 1..4096 */
|
|
}
|
|
pxa_ssp_write_reg(ssp, SSCR0, sscr0);
|
|
}
|
|
|
|
/*
|
|
* Set the SSP ports SYSCLK.
|
|
*/
|
|
static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
|
|
int clk_id, unsigned int freq, int dir)
|
|
{
|
|
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct ssp_device *ssp = priv->ssp;
|
|
|
|
u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0) &
|
|
~(SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ACS);
|
|
|
|
if (priv->extclk) {
|
|
int ret;
|
|
|
|
/*
|
|
* For DT based boards, if an extclk is given, use it
|
|
* here and configure PXA_SSP_CLK_EXT.
|
|
*/
|
|
|
|
ret = clk_set_rate(priv->extclk, freq);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
clk_id = PXA_SSP_CLK_EXT;
|
|
}
|
|
|
|
dev_dbg(ssp->dev,
|
|
"pxa_ssp_set_dai_sysclk id: %d, clk_id %d, freq %u\n",
|
|
cpu_dai->id, clk_id, freq);
|
|
|
|
switch (clk_id) {
|
|
case PXA_SSP_CLK_NET_PLL:
|
|
sscr0 |= SSCR0_MOD;
|
|
break;
|
|
case PXA_SSP_CLK_PLL:
|
|
/* Internal PLL is fixed */
|
|
if (ssp->type == PXA25x_SSP)
|
|
priv->sysclk = 1843200;
|
|
else
|
|
priv->sysclk = 13000000;
|
|
break;
|
|
case PXA_SSP_CLK_EXT:
|
|
priv->sysclk = freq;
|
|
sscr0 |= SSCR0_ECS;
|
|
break;
|
|
case PXA_SSP_CLK_NET:
|
|
priv->sysclk = freq;
|
|
sscr0 |= SSCR0_NCS | SSCR0_MOD;
|
|
break;
|
|
case PXA_SSP_CLK_AUDIO:
|
|
priv->sysclk = 0;
|
|
pxa_ssp_set_scr(ssp, 1);
|
|
sscr0 |= SSCR0_ACS;
|
|
break;
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* The SSP clock must be disabled when changing SSP clock mode
|
|
* on PXA2xx. On PXA3xx it must be enabled when doing so. */
|
|
if (ssp->type != PXA3xx_SSP)
|
|
clk_disable_unprepare(ssp->clk);
|
|
pxa_ssp_write_reg(ssp, SSCR0, sscr0);
|
|
if (ssp->type != PXA3xx_SSP)
|
|
clk_prepare_enable(ssp->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Configure the PLL frequency pxa27x and (afaik - pxa320 only)
|
|
*/
|
|
static int pxa_ssp_set_pll(struct ssp_priv *priv, unsigned int freq)
|
|
{
|
|
struct ssp_device *ssp = priv->ssp;
|
|
u32 ssacd = pxa_ssp_read_reg(ssp, SSACD) & ~0x70;
|
|
|
|
if (ssp->type == PXA3xx_SSP)
|
|
pxa_ssp_write_reg(ssp, SSACDD, 0);
|
|
|
|
switch (freq) {
|
|
case 5622000:
|
|
break;
|
|
case 11345000:
|
|
ssacd |= (0x1 << 4);
|
|
break;
|
|
case 12235000:
|
|
ssacd |= (0x2 << 4);
|
|
break;
|
|
case 14857000:
|
|
ssacd |= (0x3 << 4);
|
|
break;
|
|
case 32842000:
|
|
ssacd |= (0x4 << 4);
|
|
break;
|
|
case 48000000:
|
|
ssacd |= (0x5 << 4);
|
|
break;
|
|
case 0:
|
|
/* Disable */
|
|
break;
|
|
|
|
default:
|
|
/* PXA3xx has a clock ditherer which can be used to generate
|
|
* a wider range of frequencies - calculate a value for it.
|
|
*/
|
|
if (ssp->type == PXA3xx_SSP) {
|
|
u32 val;
|
|
u64 tmp = 19968;
|
|
|
|
tmp *= 1000000;
|
|
do_div(tmp, freq);
|
|
val = tmp;
|
|
|
|
val = (val << 16) | 64;
|
|
pxa_ssp_write_reg(ssp, SSACDD, val);
|
|
|
|
ssacd |= (0x6 << 4);
|
|
|
|
dev_dbg(ssp->dev,
|
|
"Using SSACDD %x to supply %uHz\n",
|
|
val, freq);
|
|
break;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
pxa_ssp_write_reg(ssp, SSACD, ssacd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Set the active slots in TDM/Network mode
|
|
*/
|
|
static int pxa_ssp_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai,
|
|
unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width)
|
|
{
|
|
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct ssp_device *ssp = priv->ssp;
|
|
u32 sscr0;
|
|
|
|
sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
|
|
sscr0 &= ~(SSCR0_MOD | SSCR0_SlotsPerFrm(8) | SSCR0_EDSS | SSCR0_DSS);
|
|
|
|
/* set slot width */
|
|
if (slot_width > 16)
|
|
sscr0 |= SSCR0_EDSS | SSCR0_DataSize(slot_width - 16);
|
|
else
|
|
sscr0 |= SSCR0_DataSize(slot_width);
|
|
|
|
if (slots > 1) {
|
|
/* enable network mode */
|
|
sscr0 |= SSCR0_MOD;
|
|
|
|
/* set number of active slots */
|
|
sscr0 |= SSCR0_SlotsPerFrm(slots);
|
|
|
|
/* set active slot mask */
|
|
pxa_ssp_write_reg(ssp, SSTSA, tx_mask);
|
|
pxa_ssp_write_reg(ssp, SSRSA, rx_mask);
|
|
}
|
|
pxa_ssp_write_reg(ssp, SSCR0, sscr0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Tristate the SSP DAI lines
|
|
*/
|
|
static int pxa_ssp_set_dai_tristate(struct snd_soc_dai *cpu_dai,
|
|
int tristate)
|
|
{
|
|
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct ssp_device *ssp = priv->ssp;
|
|
u32 sscr1;
|
|
|
|
sscr1 = pxa_ssp_read_reg(ssp, SSCR1);
|
|
if (tristate)
|
|
sscr1 &= ~SSCR1_TTE;
|
|
else
|
|
sscr1 |= SSCR1_TTE;
|
|
pxa_ssp_write_reg(ssp, SSCR1, sscr1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai,
|
|
unsigned int fmt)
|
|
{
|
|
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
case SND_SOC_DAIFMT_CBM_CFS:
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
case SND_SOC_DAIFMT_NB_IF:
|
|
case SND_SOC_DAIFMT_IB_IF:
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
case SND_SOC_DAIFMT_DSP_B:
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Settings will be applied in hw_params() */
|
|
priv->dai_fmt = fmt;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Set up the SSP DAI format.
|
|
* The SSP Port must be inactive before calling this function as the
|
|
* physical interface format is changed.
|
|
*/
|
|
static int pxa_ssp_configure_dai_fmt(struct ssp_priv *priv)
|
|
{
|
|
struct ssp_device *ssp = priv->ssp;
|
|
u32 sscr0, sscr1, sspsp, scfr;
|
|
|
|
/* check if we need to change anything at all */
|
|
if (priv->configured_dai_fmt == priv->dai_fmt)
|
|
return 0;
|
|
|
|
/* reset port settings */
|
|
sscr0 = pxa_ssp_read_reg(ssp, SSCR0) &
|
|
~(SSCR0_PSP | SSCR0_MOD);
|
|
sscr1 = pxa_ssp_read_reg(ssp, SSCR1) &
|
|
~(SSCR1_SCLKDIR | SSCR1_SFRMDIR | SSCR1_SCFR |
|
|
SSCR1_RWOT | SSCR1_TRAIL | SSCR1_TFT | SSCR1_RFT);
|
|
sspsp = pxa_ssp_read_reg(ssp, SSPSP) &
|
|
~(SSPSP_SFRMP | SSPSP_SCMODE(3));
|
|
|
|
sscr1 |= SSCR1_RxTresh(8) | SSCR1_TxTresh(7);
|
|
|
|
switch (priv->dai_fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
sscr1 |= SSCR1_SCLKDIR | SSCR1_SFRMDIR | SSCR1_SCFR;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBM_CFS:
|
|
sscr1 |= SSCR1_SCLKDIR | SSCR1_SCFR;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (priv->dai_fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
sspsp |= SSPSP_SFRMP;
|
|
break;
|
|
case SND_SOC_DAIFMT_NB_IF:
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_IF:
|
|
sspsp |= SSPSP_SCMODE(2);
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
sspsp |= SSPSP_SCMODE(2) | SSPSP_SFRMP;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (priv->dai_fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
sscr0 |= SSCR0_PSP;
|
|
sscr1 |= SSCR1_RWOT | SSCR1_TRAIL;
|
|
/* See hw_params() */
|
|
break;
|
|
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
sspsp |= SSPSP_FSRT;
|
|
fallthrough;
|
|
case SND_SOC_DAIFMT_DSP_B:
|
|
sscr0 |= SSCR0_MOD | SSCR0_PSP;
|
|
sscr1 |= SSCR1_TRAIL | SSCR1_RWOT;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
pxa_ssp_write_reg(ssp, SSCR0, sscr0);
|
|
pxa_ssp_write_reg(ssp, SSCR1, sscr1);
|
|
pxa_ssp_write_reg(ssp, SSPSP, sspsp);
|
|
|
|
switch (priv->dai_fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
case SND_SOC_DAIFMT_CBM_CFS:
|
|
scfr = pxa_ssp_read_reg(ssp, SSCR1) | SSCR1_SCFR;
|
|
pxa_ssp_write_reg(ssp, SSCR1, scfr);
|
|
|
|
while (pxa_ssp_read_reg(ssp, SSSR) & SSSR_BSY)
|
|
cpu_relax();
|
|
break;
|
|
}
|
|
|
|
dump_registers(ssp);
|
|
|
|
/* Since we are configuring the timings for the format by hand
|
|
* we have to defer some things until hw_params() where we
|
|
* know parameters like the sample size.
|
|
*/
|
|
priv->configured_dai_fmt = priv->dai_fmt;
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct pxa_ssp_clock_mode {
|
|
int rate;
|
|
int pll;
|
|
u8 acds;
|
|
u8 scdb;
|
|
};
|
|
|
|
static const struct pxa_ssp_clock_mode pxa_ssp_clock_modes[] = {
|
|
{ .rate = 8000, .pll = 32842000, .acds = SSACD_ACDS_32, .scdb = SSACD_SCDB_4X },
|
|
{ .rate = 11025, .pll = 5622000, .acds = SSACD_ACDS_4, .scdb = SSACD_SCDB_4X },
|
|
{ .rate = 16000, .pll = 32842000, .acds = SSACD_ACDS_16, .scdb = SSACD_SCDB_4X },
|
|
{ .rate = 22050, .pll = 5622000, .acds = SSACD_ACDS_2, .scdb = SSACD_SCDB_4X },
|
|
{ .rate = 44100, .pll = 11345000, .acds = SSACD_ACDS_2, .scdb = SSACD_SCDB_4X },
|
|
{ .rate = 48000, .pll = 12235000, .acds = SSACD_ACDS_2, .scdb = SSACD_SCDB_4X },
|
|
{ .rate = 96000, .pll = 12235000, .acds = SSACD_ACDS_4, .scdb = SSACD_SCDB_1X },
|
|
{}
|
|
};
|
|
|
|
/*
|
|
* Set the SSP audio DMA parameters and sample size.
|
|
* Can be called multiple times by oss emulation.
|
|
*/
|
|
static int pxa_ssp_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *cpu_dai)
|
|
{
|
|
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct ssp_device *ssp = priv->ssp;
|
|
int chn = params_channels(params);
|
|
u32 sscr0, sspsp;
|
|
int width = snd_pcm_format_physical_width(params_format(params));
|
|
int ttsa = pxa_ssp_read_reg(ssp, SSTSA) & 0xf;
|
|
struct snd_dmaengine_dai_dma_data *dma_data;
|
|
int rate = params_rate(params);
|
|
int bclk = rate * chn * (width / 8);
|
|
int ret;
|
|
|
|
dma_data = snd_soc_dai_get_dma_data(cpu_dai, substream);
|
|
|
|
/* Network mode with one active slot (ttsa == 1) can be used
|
|
* to force 16-bit frame width on the wire (for S16_LE), even
|
|
* with two channels. Use 16-bit DMA transfers for this case.
|
|
*/
|
|
pxa_ssp_set_dma_params(ssp,
|
|
((chn == 2) && (ttsa != 1)) || (width == 32),
|
|
substream->stream == SNDRV_PCM_STREAM_PLAYBACK, dma_data);
|
|
|
|
/* we can only change the settings if the port is not in use */
|
|
if (pxa_ssp_read_reg(ssp, SSCR0) & SSCR0_SSE)
|
|
return 0;
|
|
|
|
ret = pxa_ssp_configure_dai_fmt(priv);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* clear selected SSP bits */
|
|
sscr0 = pxa_ssp_read_reg(ssp, SSCR0) & ~(SSCR0_DSS | SSCR0_EDSS);
|
|
|
|
/* bit size */
|
|
switch (params_format(params)) {
|
|
case SNDRV_PCM_FORMAT_S16_LE:
|
|
if (ssp->type == PXA3xx_SSP)
|
|
sscr0 |= SSCR0_FPCKE;
|
|
sscr0 |= SSCR0_DataSize(16);
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S24_LE:
|
|
sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(8));
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S32_LE:
|
|
sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(16));
|
|
break;
|
|
}
|
|
pxa_ssp_write_reg(ssp, SSCR0, sscr0);
|
|
|
|
if (sscr0 & SSCR0_ACS) {
|
|
ret = pxa_ssp_set_pll(priv, bclk);
|
|
|
|
/*
|
|
* If we were able to generate the bclk directly,
|
|
* all is fine. Otherwise, look up the closest rate
|
|
* from the table and also set the dividers.
|
|
*/
|
|
|
|
if (ret < 0) {
|
|
const struct pxa_ssp_clock_mode *m;
|
|
int ssacd, acds;
|
|
|
|
for (m = pxa_ssp_clock_modes; m->rate; m++) {
|
|
if (m->rate == rate)
|
|
break;
|
|
}
|
|
|
|
if (!m->rate)
|
|
return -EINVAL;
|
|
|
|
acds = m->acds;
|
|
|
|
/* The values in the table are for 16 bits */
|
|
if (width == 32)
|
|
acds--;
|
|
|
|
ret = pxa_ssp_set_pll(priv, bclk);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ssacd = pxa_ssp_read_reg(ssp, SSACD);
|
|
ssacd &= ~(SSACD_ACDS(7) | SSACD_SCDB_1X);
|
|
ssacd |= SSACD_ACDS(m->acds);
|
|
ssacd |= m->scdb;
|
|
pxa_ssp_write_reg(ssp, SSACD, ssacd);
|
|
}
|
|
} else if (sscr0 & SSCR0_ECS) {
|
|
/*
|
|
* For setups with external clocking, the PLL and its diviers
|
|
* are not active. Instead, the SCR bits in SSCR0 can be used
|
|
* to divide the clock.
|
|
*/
|
|
pxa_ssp_set_scr(ssp, bclk / rate);
|
|
}
|
|
|
|
switch (priv->dai_fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
sspsp = pxa_ssp_read_reg(ssp, SSPSP);
|
|
|
|
if (((priv->sysclk / bclk) == 64) && (width == 16)) {
|
|
/* This is a special case where the bitclk is 64fs
|
|
* and we're not dealing with 2*32 bits of audio
|
|
* samples.
|
|
*
|
|
* The SSP values used for that are all found out by
|
|
* trying and failing a lot; some of the registers
|
|
* needed for that mode are only available on PXA3xx.
|
|
*/
|
|
if (ssp->type != PXA3xx_SSP)
|
|
return -EINVAL;
|
|
|
|
sspsp |= SSPSP_SFRMWDTH(width * 2);
|
|
sspsp |= SSPSP_SFRMDLY(width * 4);
|
|
sspsp |= SSPSP_EDMYSTOP(3);
|
|
sspsp |= SSPSP_DMYSTOP(3);
|
|
sspsp |= SSPSP_DMYSTRT(1);
|
|
} else {
|
|
/* The frame width is the width the LRCLK is
|
|
* asserted for; the delay is expressed in
|
|
* half cycle units. We need the extra cycle
|
|
* because the data starts clocking out one BCLK
|
|
* after LRCLK changes polarity.
|
|
*/
|
|
sspsp |= SSPSP_SFRMWDTH(width + 1);
|
|
sspsp |= SSPSP_SFRMDLY((width + 1) * 2);
|
|
sspsp |= SSPSP_DMYSTRT(1);
|
|
}
|
|
|
|
pxa_ssp_write_reg(ssp, SSPSP, sspsp);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* When we use a network mode, we always require TDM slots
|
|
* - complain loudly and fail if they've not been set up yet.
|
|
*/
|
|
if ((sscr0 & SSCR0_MOD) && !ttsa) {
|
|
dev_err(ssp->dev, "No TDM timeslot configured\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
dump_registers(ssp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pxa_ssp_set_running_bit(struct snd_pcm_substream *substream,
|
|
struct ssp_device *ssp, int value)
|
|
{
|
|
uint32_t sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
|
|
uint32_t sscr1 = pxa_ssp_read_reg(ssp, SSCR1);
|
|
uint32_t sspsp = pxa_ssp_read_reg(ssp, SSPSP);
|
|
uint32_t sssr = pxa_ssp_read_reg(ssp, SSSR);
|
|
|
|
if (value && (sscr0 & SSCR0_SSE))
|
|
pxa_ssp_write_reg(ssp, SSCR0, sscr0 & ~SSCR0_SSE);
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
|
|
if (value)
|
|
sscr1 |= SSCR1_TSRE;
|
|
else
|
|
sscr1 &= ~SSCR1_TSRE;
|
|
} else {
|
|
if (value)
|
|
sscr1 |= SSCR1_RSRE;
|
|
else
|
|
sscr1 &= ~SSCR1_RSRE;
|
|
}
|
|
|
|
pxa_ssp_write_reg(ssp, SSCR1, sscr1);
|
|
|
|
if (value) {
|
|
pxa_ssp_write_reg(ssp, SSSR, sssr);
|
|
pxa_ssp_write_reg(ssp, SSPSP, sspsp);
|
|
pxa_ssp_write_reg(ssp, SSCR0, sscr0 | SSCR0_SSE);
|
|
}
|
|
}
|
|
|
|
static int pxa_ssp_trigger(struct snd_pcm_substream *substream, int cmd,
|
|
struct snd_soc_dai *cpu_dai)
|
|
{
|
|
int ret = 0;
|
|
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct ssp_device *ssp = priv->ssp;
|
|
int val;
|
|
|
|
switch (cmd) {
|
|
case SNDRV_PCM_TRIGGER_RESUME:
|
|
pxa_ssp_enable(ssp);
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
|
|
pxa_ssp_set_running_bit(substream, ssp, 1);
|
|
val = pxa_ssp_read_reg(ssp, SSSR);
|
|
pxa_ssp_write_reg(ssp, SSSR, val);
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_START:
|
|
pxa_ssp_set_running_bit(substream, ssp, 1);
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_STOP:
|
|
pxa_ssp_set_running_bit(substream, ssp, 0);
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_SUSPEND:
|
|
pxa_ssp_disable(ssp);
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
|
|
pxa_ssp_set_running_bit(substream, ssp, 0);
|
|
break;
|
|
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
dump_registers(ssp);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int pxa_ssp_probe(struct snd_soc_dai *dai)
|
|
{
|
|
struct device *dev = dai->dev;
|
|
struct ssp_priv *priv;
|
|
int ret;
|
|
|
|
priv = kzalloc(sizeof(struct ssp_priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
if (dev->of_node) {
|
|
struct device_node *ssp_handle;
|
|
|
|
ssp_handle = of_parse_phandle(dev->of_node, "port", 0);
|
|
if (!ssp_handle) {
|
|
dev_err(dev, "unable to get 'port' phandle\n");
|
|
ret = -ENODEV;
|
|
goto err_priv;
|
|
}
|
|
|
|
priv->ssp = pxa_ssp_request_of(ssp_handle, "SoC audio");
|
|
if (priv->ssp == NULL) {
|
|
ret = -ENODEV;
|
|
goto err_priv;
|
|
}
|
|
|
|
priv->extclk = devm_clk_get(dev, "extclk");
|
|
if (IS_ERR(priv->extclk)) {
|
|
ret = PTR_ERR(priv->extclk);
|
|
if (ret == -EPROBE_DEFER)
|
|
return ret;
|
|
|
|
priv->extclk = NULL;
|
|
}
|
|
} else {
|
|
priv->ssp = pxa_ssp_request(dai->id + 1, "SoC audio");
|
|
if (priv->ssp == NULL) {
|
|
ret = -ENODEV;
|
|
goto err_priv;
|
|
}
|
|
}
|
|
|
|
priv->dai_fmt = (unsigned int) -1;
|
|
snd_soc_dai_set_drvdata(dai, priv);
|
|
|
|
return 0;
|
|
|
|
err_priv:
|
|
kfree(priv);
|
|
return ret;
|
|
}
|
|
|
|
static int pxa_ssp_remove(struct snd_soc_dai *dai)
|
|
{
|
|
struct ssp_priv *priv = snd_soc_dai_get_drvdata(dai);
|
|
|
|
pxa_ssp_free(priv->ssp);
|
|
kfree(priv);
|
|
return 0;
|
|
}
|
|
|
|
#define PXA_SSP_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
|
|
SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | \
|
|
SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
|
|
SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_64000 | \
|
|
SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
|
|
|
|
#define PXA_SSP_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE)
|
|
|
|
static const struct snd_soc_dai_ops pxa_ssp_dai_ops = {
|
|
.startup = pxa_ssp_startup,
|
|
.shutdown = pxa_ssp_shutdown,
|
|
.trigger = pxa_ssp_trigger,
|
|
.hw_params = pxa_ssp_hw_params,
|
|
.set_sysclk = pxa_ssp_set_dai_sysclk,
|
|
.set_fmt = pxa_ssp_set_dai_fmt,
|
|
.set_tdm_slot = pxa_ssp_set_dai_tdm_slot,
|
|
.set_tristate = pxa_ssp_set_dai_tristate,
|
|
};
|
|
|
|
static struct snd_soc_dai_driver pxa_ssp_dai = {
|
|
.probe = pxa_ssp_probe,
|
|
.remove = pxa_ssp_remove,
|
|
.playback = {
|
|
.channels_min = 1,
|
|
.channels_max = 8,
|
|
.rates = PXA_SSP_RATES,
|
|
.formats = PXA_SSP_FORMATS,
|
|
},
|
|
.capture = {
|
|
.channels_min = 1,
|
|
.channels_max = 8,
|
|
.rates = PXA_SSP_RATES,
|
|
.formats = PXA_SSP_FORMATS,
|
|
},
|
|
.ops = &pxa_ssp_dai_ops,
|
|
};
|
|
|
|
static const struct snd_soc_component_driver pxa_ssp_component = {
|
|
.name = "pxa-ssp",
|
|
.pcm_construct = pxa2xx_soc_pcm_new,
|
|
.open = pxa2xx_soc_pcm_open,
|
|
.close = pxa2xx_soc_pcm_close,
|
|
.hw_params = pxa2xx_soc_pcm_hw_params,
|
|
.prepare = pxa2xx_soc_pcm_prepare,
|
|
.trigger = pxa2xx_soc_pcm_trigger,
|
|
.pointer = pxa2xx_soc_pcm_pointer,
|
|
.suspend = pxa_ssp_suspend,
|
|
.resume = pxa_ssp_resume,
|
|
};
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id pxa_ssp_of_ids[] = {
|
|
{ .compatible = "mrvl,pxa-ssp-dai" },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, pxa_ssp_of_ids);
|
|
#endif
|
|
|
|
static int asoc_ssp_probe(struct platform_device *pdev)
|
|
{
|
|
return devm_snd_soc_register_component(&pdev->dev, &pxa_ssp_component,
|
|
&pxa_ssp_dai, 1);
|
|
}
|
|
|
|
static struct platform_driver asoc_ssp_driver = {
|
|
.driver = {
|
|
.name = "pxa-ssp-dai",
|
|
.of_match_table = of_match_ptr(pxa_ssp_of_ids),
|
|
},
|
|
|
|
.probe = asoc_ssp_probe,
|
|
};
|
|
|
|
module_platform_driver(asoc_ssp_driver);
|
|
|
|
/* Module information */
|
|
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
|
|
MODULE_DESCRIPTION("PXA SSP/PCM SoC Interface");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:pxa-ssp-dai");
|