forked from Minki/linux
4fb1967242
This patch adds syscon-{reboot, poweroff} nodes to allow the
generic syscon-{reboot, poweroff} driver to reset/poweroff exynos3250 SoC.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
708 lines
17 KiB
Plaintext
708 lines
17 KiB
Plaintext
/*
|
|
* Samsung's Exynos3250 SoC device tree source
|
|
*
|
|
* Copyright (c) 2014 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
*
|
|
* Samsung's Exynos3250 SoC device nodes are listed in this file. Exynos3250
|
|
* based board files can include this file and provide values for board specfic
|
|
* bindings.
|
|
*
|
|
* Note: This file does not include device nodes for all the controllers in
|
|
* Exynos3250 SoC. As device tree coverage for Exynos3250 increases, additional
|
|
* nodes can be added to this file.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include "skeleton.dtsi"
|
|
#include "exynos4-cpu-thermal.dtsi"
|
|
#include <dt-bindings/clock/exynos3250.h>
|
|
|
|
/ {
|
|
compatible = "samsung,exynos3250";
|
|
interrupt-parent = <&gic>;
|
|
|
|
aliases {
|
|
pinctrl0 = &pinctrl_0;
|
|
pinctrl1 = &pinctrl_1;
|
|
mshc0 = &mshc_0;
|
|
mshc1 = &mshc_1;
|
|
spi0 = &spi_0;
|
|
spi1 = &spi_1;
|
|
i2c0 = &i2c_0;
|
|
i2c1 = &i2c_1;
|
|
i2c2 = &i2c_2;
|
|
i2c3 = &i2c_3;
|
|
i2c4 = &i2c_4;
|
|
i2c5 = &i2c_5;
|
|
i2c6 = &i2c_6;
|
|
i2c7 = &i2c_7;
|
|
serial0 = &serial_0;
|
|
serial1 = &serial_1;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0>;
|
|
clock-frequency = <1000000000>;
|
|
clocks = <&cmu CLK_ARM_CLK>;
|
|
clock-names = "cpu";
|
|
#cooling-cells = <2>;
|
|
|
|
operating-points = <
|
|
1000000 1150000
|
|
900000 1112500
|
|
800000 1075000
|
|
700000 1037500
|
|
600000 1000000
|
|
500000 962500
|
|
400000 925000
|
|
300000 887500
|
|
200000 850000
|
|
100000 850000
|
|
>;
|
|
};
|
|
|
|
cpu1: cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <1>;
|
|
clock-frequency = <1000000000>;
|
|
};
|
|
};
|
|
|
|
soc: soc {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
fixed-rate-clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
xusbxti: clock@0 {
|
|
compatible = "fixed-clock";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
clock-frequency = <0>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "xusbxti";
|
|
};
|
|
|
|
xxti: clock@1 {
|
|
compatible = "fixed-clock";
|
|
reg = <1>;
|
|
clock-frequency = <0>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "xxti";
|
|
};
|
|
|
|
xtcxo: clock@2 {
|
|
compatible = "fixed-clock";
|
|
reg = <2>;
|
|
clock-frequency = <0>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "xtcxo";
|
|
};
|
|
};
|
|
|
|
sysram@02020000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0x02020000 0x40000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x02020000 0x40000>;
|
|
|
|
smp-sysram@0 {
|
|
compatible = "samsung,exynos4210-sysram";
|
|
reg = <0x0 0x1000>;
|
|
};
|
|
|
|
smp-sysram@3f000 {
|
|
compatible = "samsung,exynos4210-sysram-ns";
|
|
reg = <0x3f000 0x1000>;
|
|
};
|
|
};
|
|
|
|
chipid@10000000 {
|
|
compatible = "samsung,exynos4210-chipid";
|
|
reg = <0x10000000 0x100>;
|
|
};
|
|
|
|
sys_reg: syscon@10010000 {
|
|
compatible = "samsung,exynos3-sysreg", "syscon";
|
|
reg = <0x10010000 0x400>;
|
|
};
|
|
|
|
pmu_system_controller: system-controller@10020000 {
|
|
compatible = "samsung,exynos3250-pmu", "syscon";
|
|
reg = <0x10020000 0x4000>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
interrupt-parent = <&gic>;
|
|
};
|
|
|
|
poweroff: syscon-poweroff {
|
|
compatible = "syscon-poweroff";
|
|
regmap = <&pmu_system_controller>;
|
|
offset = <0x330C>; /* PS_HOLD_CONTROL */
|
|
mask = <0x5200>; /* Reset value */
|
|
};
|
|
|
|
reboot: syscon-reboot {
|
|
compatible = "syscon-reboot";
|
|
regmap = <&pmu_system_controller>;
|
|
offset = <0x0400>; /* SWRESET */
|
|
mask = <0x1>;
|
|
};
|
|
|
|
mipi_phy: video-phy@10020710 {
|
|
compatible = "samsung,s5pv210-mipi-video-phy";
|
|
#phy-cells = <1>;
|
|
syscon = <&pmu_system_controller>;
|
|
};
|
|
|
|
pd_cam: cam-power-domain@10023C00 {
|
|
compatible = "samsung,exynos4210-pd";
|
|
reg = <0x10023C00 0x20>;
|
|
#power-domain-cells = <0>;
|
|
};
|
|
|
|
pd_mfc: mfc-power-domain@10023C40 {
|
|
compatible = "samsung,exynos4210-pd";
|
|
reg = <0x10023C40 0x20>;
|
|
#power-domain-cells = <0>;
|
|
};
|
|
|
|
pd_g3d: g3d-power-domain@10023C60 {
|
|
compatible = "samsung,exynos4210-pd";
|
|
reg = <0x10023C60 0x20>;
|
|
#power-domain-cells = <0>;
|
|
};
|
|
|
|
pd_lcd0: lcd0-power-domain@10023C80 {
|
|
compatible = "samsung,exynos4210-pd";
|
|
reg = <0x10023C80 0x20>;
|
|
#power-domain-cells = <0>;
|
|
};
|
|
|
|
pd_isp: isp-power-domain@10023CA0 {
|
|
compatible = "samsung,exynos4210-pd";
|
|
reg = <0x10023CA0 0x20>;
|
|
#power-domain-cells = <0>;
|
|
};
|
|
|
|
cmu: clock-controller@10030000 {
|
|
compatible = "samsung,exynos3250-cmu";
|
|
reg = <0x10030000 0x20000>;
|
|
#clock-cells = <1>;
|
|
assigned-clocks = <&cmu CLK_MOUT_ACLK_400_MCUISP_SUB>,
|
|
<&cmu CLK_MOUT_ACLK_266_SUB>;
|
|
assigned-clock-parents = <&cmu CLK_FIN_PLL>,
|
|
<&cmu CLK_FIN_PLL>;
|
|
};
|
|
|
|
cmu_dmc: clock-controller@105C0000 {
|
|
compatible = "samsung,exynos3250-cmu-dmc";
|
|
reg = <0x105C0000 0x2000>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
rtc: rtc@10070000 {
|
|
compatible = "samsung,s3c6410-rtc";
|
|
reg = <0x10070000 0x100>;
|
|
interrupts = <0 73 0>, <0 74 0>;
|
|
interrupt-parent = <&pmu_system_controller>;
|
|
status = "disabled";
|
|
};
|
|
|
|
tmu: tmu@100C0000 {
|
|
compatible = "samsung,exynos3250-tmu";
|
|
reg = <0x100C0000 0x100>;
|
|
interrupts = <0 216 0>;
|
|
clocks = <&cmu CLK_TMU_APBIF>;
|
|
clock-names = "tmu_apbif";
|
|
#include "exynos4412-tmu-sensor-conf.dtsi"
|
|
status = "disabled";
|
|
};
|
|
|
|
gic: interrupt-controller@10481000 {
|
|
compatible = "arm,cortex-a15-gic";
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
reg = <0x10481000 0x1000>,
|
|
<0x10482000 0x1000>,
|
|
<0x10484000 0x2000>,
|
|
<0x10486000 0x2000>;
|
|
interrupts = <1 9 0xf04>;
|
|
};
|
|
|
|
mct@10050000 {
|
|
compatible = "samsung,exynos4210-mct";
|
|
reg = <0x10050000 0x800>;
|
|
interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>,
|
|
<0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>;
|
|
clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>;
|
|
clock-names = "fin_pll", "mct";
|
|
};
|
|
|
|
pinctrl_1: pinctrl@11000000 {
|
|
compatible = "samsung,exynos3250-pinctrl";
|
|
reg = <0x11000000 0x1000>;
|
|
interrupts = <0 225 0>;
|
|
|
|
wakeup-interrupt-controller {
|
|
compatible = "samsung,exynos4210-wakeup-eint";
|
|
interrupts = <0 48 0>;
|
|
};
|
|
};
|
|
|
|
pinctrl_0: pinctrl@11400000 {
|
|
compatible = "samsung,exynos3250-pinctrl";
|
|
reg = <0x11400000 0x1000>;
|
|
interrupts = <0 240 0>;
|
|
};
|
|
|
|
jpeg: codec@11830000 {
|
|
compatible = "samsung,exynos3250-jpeg";
|
|
reg = <0x11830000 0x1000>;
|
|
interrupts = <0 171 0>;
|
|
clocks = <&cmu CLK_JPEG>, <&cmu CLK_SCLK_JPEG>;
|
|
clock-names = "jpeg", "sclk";
|
|
power-domains = <&pd_cam>;
|
|
assigned-clocks = <&cmu CLK_MOUT_CAM_BLK>, <&cmu CLK_SCLK_JPEG>;
|
|
assigned-clock-rates = <0>, <150000000>;
|
|
assigned-clock-parents = <&cmu CLK_DIV_MPLL_PRE>;
|
|
iommus = <&sysmmu_jpeg>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sysmmu_jpeg: sysmmu@11A60000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x11a60000 0x1000>;
|
|
interrupts = <0 156 0>, <0 161 0>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&cmu CLK_SMMUJPEG>, <&cmu CLK_JPEG>;
|
|
power-domains = <&pd_cam>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
fimd: fimd@11c00000 {
|
|
compatible = "samsung,exynos3250-fimd";
|
|
reg = <0x11c00000 0x30000>;
|
|
interrupt-names = "fifo", "vsync", "lcd_sys";
|
|
interrupts = <0 84 0>, <0 85 0>, <0 86 0>;
|
|
clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>;
|
|
clock-names = "sclk_fimd", "fimd";
|
|
power-domains = <&pd_lcd0>;
|
|
iommus = <&sysmmu_fimd0>;
|
|
samsung,sysreg = <&sys_reg>;
|
|
status = "disabled";
|
|
};
|
|
|
|
dsi_0: dsi@11C80000 {
|
|
compatible = "samsung,exynos3250-mipi-dsi";
|
|
reg = <0x11C80000 0x10000>;
|
|
interrupts = <0 83 0>;
|
|
samsung,phy-type = <0>;
|
|
power-domains = <&pd_lcd0>;
|
|
phys = <&mipi_phy 1>;
|
|
phy-names = "dsim";
|
|
clocks = <&cmu CLK_DSIM0>, <&cmu CLK_SCLK_MIPI0>;
|
|
clock-names = "bus_clk", "pll_clk";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sysmmu_fimd0: sysmmu@11E20000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x11e20000 0x1000>;
|
|
interrupts = <0 80 0>, <0 81 0>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>;
|
|
power-domains = <&pd_lcd0>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
hsotg: hsotg@12480000 {
|
|
compatible = "snps,dwc2";
|
|
reg = <0x12480000 0x20000>;
|
|
interrupts = <0 141 0>;
|
|
clocks = <&cmu CLK_USBOTG>;
|
|
clock-names = "otg";
|
|
phys = <&exynos_usbphy 0>;
|
|
phy-names = "usb2-phy";
|
|
status = "disabled";
|
|
};
|
|
|
|
mshc_0: mshc@12510000 {
|
|
compatible = "samsung,exynos5420-dw-mshc";
|
|
reg = <0x12510000 0x1000>;
|
|
interrupts = <0 142 0>;
|
|
clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
|
|
clock-names = "biu", "ciu";
|
|
fifo-depth = <0x80>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mshc_1: mshc@12520000 {
|
|
compatible = "samsung,exynos5420-dw-mshc";
|
|
reg = <0x12520000 0x1000>;
|
|
interrupts = <0 143 0>;
|
|
clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
|
|
clock-names = "biu", "ciu";
|
|
fifo-depth = <0x80>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
exynos_usbphy: exynos-usbphy@125B0000 {
|
|
compatible = "samsung,exynos3250-usb2-phy";
|
|
reg = <0x125B0000 0x100>;
|
|
samsung,pmureg-phandle = <&pmu_system_controller>;
|
|
clocks = <&cmu CLK_USBOTG>, <&cmu CLK_SCLK_UPLL>;
|
|
clock-names = "phy", "ref";
|
|
#phy-cells = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
amba {
|
|
compatible = "arm,amba-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
pdma0: pdma@12680000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x12680000 0x1000>;
|
|
interrupts = <0 138 0>;
|
|
clocks = <&cmu CLK_PDMA0>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
#dma-channels = <8>;
|
|
#dma-requests = <32>;
|
|
};
|
|
|
|
pdma1: pdma@12690000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x12690000 0x1000>;
|
|
interrupts = <0 139 0>;
|
|
clocks = <&cmu CLK_PDMA1>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
#dma-channels = <8>;
|
|
#dma-requests = <32>;
|
|
};
|
|
};
|
|
|
|
adc: adc@126C0000 {
|
|
compatible = "samsung,exynos3250-adc",
|
|
"samsung,exynos-adc-v2";
|
|
reg = <0x126C0000 0x100>;
|
|
interrupts = <0 137 0>;
|
|
clock-names = "adc", "sclk";
|
|
clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
|
|
#io-channel-cells = <1>;
|
|
io-channel-ranges;
|
|
samsung,syscon-phandle = <&pmu_system_controller>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mfc: codec@13400000 {
|
|
compatible = "samsung,mfc-v7";
|
|
reg = <0x13400000 0x10000>;
|
|
interrupts = <0 102 0>;
|
|
clock-names = "mfc", "sclk_mfc";
|
|
clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>;
|
|
power-domains = <&pd_mfc>;
|
|
iommus = <&sysmmu_mfc>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sysmmu_mfc: sysmmu@13620000 {
|
|
compatible = "samsung,exynos-sysmmu";
|
|
reg = <0x13620000 0x1000>;
|
|
interrupts = <0 96 0>, <0 98 0>;
|
|
clock-names = "sysmmu", "master";
|
|
clocks = <&cmu CLK_SMMUMFC_L>, <&cmu CLK_MFC>;
|
|
power-domains = <&pd_mfc>;
|
|
#iommu-cells = <0>;
|
|
};
|
|
|
|
serial_0: serial@13800000 {
|
|
compatible = "samsung,exynos4210-uart";
|
|
reg = <0x13800000 0x100>;
|
|
interrupts = <0 109 0>;
|
|
clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_data &uart0_fctl>;
|
|
status = "disabled";
|
|
};
|
|
|
|
serial_1: serial@13810000 {
|
|
compatible = "samsung,exynos4210-uart";
|
|
reg = <0x13810000 0x100>;
|
|
interrupts = <0 110 0>;
|
|
clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart1_data>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_0: i2c@13860000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x13860000 0x100>;
|
|
interrupts = <0 113 0>;
|
|
clocks = <&cmu CLK_I2C0>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_1: i2c@13870000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x13870000 0x100>;
|
|
interrupts = <0 114 0>;
|
|
clocks = <&cmu CLK_I2C1>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_2: i2c@13880000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x13880000 0x100>;
|
|
interrupts = <0 115 0>;
|
|
clocks = <&cmu CLK_I2C2>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c2_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_3: i2c@13890000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x13890000 0x100>;
|
|
interrupts = <0 116 0>;
|
|
clocks = <&cmu CLK_I2C3>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c3_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_4: i2c@138A0000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x138A0000 0x100>;
|
|
interrupts = <0 117 0>;
|
|
clocks = <&cmu CLK_I2C4>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c4_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_5: i2c@138B0000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x138B0000 0x100>;
|
|
interrupts = <0 118 0>;
|
|
clocks = <&cmu CLK_I2C5>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c5_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_6: i2c@138C0000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x138C0000 0x100>;
|
|
interrupts = <0 119 0>;
|
|
clocks = <&cmu CLK_I2C6>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c6_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_7: i2c@138D0000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "samsung,s3c2440-i2c";
|
|
reg = <0x138D0000 0x100>;
|
|
interrupts = <0 120 0>;
|
|
clocks = <&cmu CLK_I2C7>;
|
|
clock-names = "i2c";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c7_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi_0: spi@13920000 {
|
|
compatible = "samsung,exynos4210-spi";
|
|
reg = <0x13920000 0x100>;
|
|
interrupts = <0 121 0>;
|
|
dmas = <&pdma0 7>, <&pdma0 6>;
|
|
dma-names = "tx", "rx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&cmu CLK_SPI0>, <&cmu CLK_SCLK_SPI0>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
samsung,spi-src-clk = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi0_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi_1: spi@13930000 {
|
|
compatible = "samsung,exynos4210-spi";
|
|
reg = <0x13930000 0x100>;
|
|
interrupts = <0 122 0>;
|
|
dmas = <&pdma1 7>, <&pdma1 6>;
|
|
dma-names = "tx", "rx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&cmu CLK_SPI1>, <&cmu CLK_SCLK_SPI1>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
samsung,spi-src-clk = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi1_bus>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2s2: i2s@13970000 {
|
|
compatible = "samsung,s3c6410-i2s";
|
|
reg = <0x13970000 0x100>;
|
|
interrupts = <0 126 0>;
|
|
clocks = <&cmu CLK_I2S>, <&cmu CLK_SCLK_I2S>;
|
|
clock-names = "iis", "i2s_opclk0";
|
|
dmas = <&pdma0 14>, <&pdma0 13>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-0 = <&i2s2_bus>;
|
|
pinctrl-names = "default";
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm: pwm@139D0000 {
|
|
compatible = "samsung,exynos4210-pwm";
|
|
reg = <0x139D0000 0x1000>;
|
|
interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
|
|
<0 107 0>, <0 108 0>;
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,cortex-a7-pmu";
|
|
interrupts = <0 18 0>, <0 19 0>;
|
|
};
|
|
|
|
ppmu_dmc0: ppmu_dmc0@106a0000 {
|
|
compatible = "samsung,exynos-ppmu";
|
|
reg = <0x106a0000 0x2000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ppmu_dmc1: ppmu_dmc1@106b0000 {
|
|
compatible = "samsung,exynos-ppmu";
|
|
reg = <0x106b0000 0x2000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ppmu_cpu: ppmu_cpu@106c0000 {
|
|
compatible = "samsung,exynos-ppmu";
|
|
reg = <0x106c0000 0x2000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ppmu_rightbus: ppmu_rightbus@112a0000 {
|
|
compatible = "samsung,exynos-ppmu";
|
|
reg = <0x112a0000 0x2000>;
|
|
clocks = <&cmu CLK_PPMURIGHT>;
|
|
clock-names = "ppmu";
|
|
status = "disabled";
|
|
};
|
|
|
|
ppmu_leftbus: ppmu_leftbus0@116a0000 {
|
|
compatible = "samsung,exynos-ppmu";
|
|
reg = <0x116a0000 0x2000>;
|
|
clocks = <&cmu CLK_PPMULEFT>;
|
|
clock-names = "ppmu";
|
|
status = "disabled";
|
|
};
|
|
|
|
ppmu_camif: ppmu_camif@11ac0000 {
|
|
compatible = "samsung,exynos-ppmu";
|
|
reg = <0x11ac0000 0x2000>;
|
|
clocks = <&cmu CLK_PPMUCAMIF>;
|
|
clock-names = "ppmu";
|
|
status = "disabled";
|
|
};
|
|
|
|
ppmu_lcd0: ppmu_lcd0@11e40000 {
|
|
compatible = "samsung,exynos-ppmu";
|
|
reg = <0x11e40000 0x2000>;
|
|
clocks = <&cmu CLK_PPMULCD0>;
|
|
clock-names = "ppmu";
|
|
status = "disabled";
|
|
};
|
|
|
|
ppmu_fsys: ppmu_fsys@12630000 {
|
|
compatible = "samsung,exynos-ppmu";
|
|
reg = <0x12630000 0x2000>;
|
|
clocks = <&cmu CLK_PPMUFILE>;
|
|
clock-names = "ppmu";
|
|
status = "disabled";
|
|
};
|
|
|
|
ppmu_g3d: ppmu_g3d@13220000 {
|
|
compatible = "samsung,exynos-ppmu";
|
|
reg = <0x13220000 0x2000>;
|
|
clocks = <&cmu CLK_PPMUG3D>;
|
|
clock-names = "ppmu";
|
|
status = "disabled";
|
|
};
|
|
|
|
ppmu_mfc: ppmu_mfc@13660000 {
|
|
compatible = "samsung,exynos-ppmu";
|
|
reg = <0x13660000 0x2000>;
|
|
clocks = <&cmu CLK_PPMUMFC_L>;
|
|
clock-names = "ppmu";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
|
|
#include "exynos3250-pinctrl.dtsi"
|