forked from Minki/linux
f29bf660bf
In order to support both ACPI and DT, modify the driver to use device_* routines for obtaining the properties values. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/r/20201204171626.10935-3-mw@semihalf.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
109 lines
2.8 KiB
C
109 lines
2.8 KiB
C
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
/*
|
|
* Copyright (C) 2016 Marvell, All Rights Reserved.
|
|
*
|
|
* Author: Hu Ziji <huziji@marvell.com>
|
|
* Date: 2016-8-24
|
|
*/
|
|
#ifndef SDHCI_XENON_H_
|
|
#define SDHCI_XENON_H_
|
|
|
|
/* Register Offset of Xenon SDHC self-defined register */
|
|
#define XENON_SYS_CFG_INFO 0x0104
|
|
#define XENON_SLOT_TYPE_SDIO_SHIFT 24
|
|
#define XENON_NR_SUPPORTED_SLOT_MASK 0x7
|
|
|
|
#define XENON_SYS_OP_CTRL 0x0108
|
|
#define XENON_AUTO_CLKGATE_DISABLE_MASK BIT(20)
|
|
#define XENON_SDCLK_IDLEOFF_ENABLE_SHIFT 8
|
|
#define XENON_SLOT_ENABLE_SHIFT 0
|
|
|
|
#define XENON_SYS_EXT_OP_CTRL 0x010C
|
|
#define XENON_MASK_CMD_CONFLICT_ERR BIT(8)
|
|
|
|
#define XENON_SLOT_OP_STATUS_CTRL 0x0128
|
|
#define XENON_TUN_CONSECUTIVE_TIMES_SHIFT 16
|
|
#define XENON_TUN_CONSECUTIVE_TIMES_MASK 0x7
|
|
#define XENON_TUN_CONSECUTIVE_TIMES 0x4
|
|
#define XENON_TUNING_STEP_SHIFT 12
|
|
#define XENON_TUNING_STEP_MASK 0xF
|
|
#define XENON_TUNING_STEP_DIVIDER BIT(6)
|
|
|
|
#define XENON_SLOT_EMMC_CTRL 0x0130
|
|
#define XENON_ENABLE_RESP_STROBE BIT(25)
|
|
#define XENON_ENABLE_DATA_STROBE BIT(24)
|
|
|
|
#define XENON_SLOT_RETUNING_REQ_CTRL 0x0144
|
|
/* retuning compatible */
|
|
#define XENON_RETUNING_COMPATIBLE 0x1
|
|
|
|
#define XENON_SLOT_EXT_PRESENT_STATE 0x014C
|
|
#define XENON_DLL_LOCK_STATE 0x1
|
|
|
|
#define XENON_SLOT_DLL_CUR_DLY_VAL 0x0150
|
|
|
|
/* Tuning Parameter */
|
|
#define XENON_TMR_RETUN_NO_PRESENT 0xF
|
|
#define XENON_DEF_TUNING_COUNT 0x9
|
|
|
|
#define XENON_DEFAULT_SDCLK_FREQ 400000
|
|
#define XENON_LOWEST_SDCLK_FREQ 100000
|
|
|
|
/* Xenon specific Mode Select value */
|
|
#define XENON_CTRL_HS200 0x5
|
|
#define XENON_CTRL_HS400 0x6
|
|
|
|
enum xenon_variant {
|
|
XENON_A3700,
|
|
XENON_AP806,
|
|
XENON_AP807,
|
|
XENON_CP110
|
|
};
|
|
|
|
struct xenon_priv {
|
|
unsigned char tuning_count;
|
|
/* idx of SDHC */
|
|
u8 sdhc_id;
|
|
|
|
/*
|
|
* eMMC/SD/SDIO require different register settings.
|
|
* Xenon driver has to recognize card type
|
|
* before mmc_host->card is not available.
|
|
* This field records the card type during init.
|
|
* It is updated in xenon_init_card().
|
|
*
|
|
* It is only valid during initialization after it is updated.
|
|
* Do not access this variable in normal transfers after
|
|
* initialization completes.
|
|
*/
|
|
unsigned int init_card_type;
|
|
|
|
/*
|
|
* The bus_width, timing, and clock fields in below
|
|
* record the current ios setting of Xenon SDHC.
|
|
* Driver will adjust PHY setting if any change to
|
|
* ios affects PHY timing.
|
|
*/
|
|
unsigned char bus_width;
|
|
unsigned char timing;
|
|
unsigned int clock;
|
|
struct clk *axi_clk;
|
|
|
|
int phy_type;
|
|
/*
|
|
* Contains board-specific PHY parameters
|
|
* passed from device tree.
|
|
*/
|
|
void *phy_params;
|
|
struct xenon_emmc_phy_regs *emmc_phy_regs;
|
|
bool restore_needed;
|
|
enum xenon_variant hw_version;
|
|
};
|
|
|
|
int xenon_phy_adj(struct sdhci_host *host, struct mmc_ios *ios);
|
|
int xenon_phy_parse_params(struct device *dev,
|
|
struct sdhci_host *host);
|
|
void xenon_soc_pad_ctrl(struct sdhci_host *host,
|
|
unsigned char signal_voltage);
|
|
#endif
|