forked from Minki/linux
7dca3343fc
This rework allows to address tow memory controllers. AT91SAM9263 and AT91SAM9G45 family have tow SDRAM or DDR/SDRAM controllers. Power management should take care of this. This patch modify the way RAM IP header files are implemented to allow access to registers of both controllers ; it also adds some macros. We also modify the power management files to use those modified header files. Slow clock (assembly) and regular power management functions are synchronized for setting of RAM self-refresh procedure: (lpr & ~AT91_DDRSDRC_LPCB) | AT91_DDRSDRC_LPCB_SELF_REFRESH Note that AT91RM9200 is not impacted by this modification. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
109 lines
4.7 KiB
C
109 lines
4.7 KiB
C
/*
|
|
* arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
|
|
*
|
|
* (C) 2008 Andrew Victor
|
|
*
|
|
* DDR/SDR Controller (DDRSDRC) - System peripherals registers.
|
|
* Based on AT91CAP9 datasheet revision B.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#ifndef AT91CAP9_DDRSDR_H
|
|
#define AT91CAP9_DDRSDR_H
|
|
|
|
#define AT91_DDRSDRC_MR 0x00 /* Mode Register */
|
|
#define AT91_DDRSDRC_MODE (0xf << 0) /* Command Mode */
|
|
#define AT91_DDRSDRC_MODE_NORMAL 0
|
|
#define AT91_DDRSDRC_MODE_NOP 1
|
|
#define AT91_DDRSDRC_MODE_PRECHARGE 2
|
|
#define AT91_DDRSDRC_MODE_LMR 3
|
|
#define AT91_DDRSDRC_MODE_REFRESH 4
|
|
#define AT91_DDRSDRC_MODE_EXT_LMR 5
|
|
#define AT91_DDRSDRC_MODE_DEEP 6
|
|
|
|
#define AT91_DDRSDRC_RTR 0x04 /* Refresh Timer Register */
|
|
#define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */
|
|
|
|
#define AT91_DDRSDRC_CR 0x08 /* Configuration Register */
|
|
#define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */
|
|
#define AT91_DDRSDRC_NC_SDR8 (0 << 0)
|
|
#define AT91_DDRSDRC_NC_SDR9 (1 << 0)
|
|
#define AT91_DDRSDRC_NC_SDR10 (2 << 0)
|
|
#define AT91_DDRSDRC_NC_SDR11 (3 << 0)
|
|
#define AT91_DDRSDRC_NC_DDR9 (0 << 0)
|
|
#define AT91_DDRSDRC_NC_DDR10 (1 << 0)
|
|
#define AT91_DDRSDRC_NC_DDR11 (2 << 0)
|
|
#define AT91_DDRSDRC_NC_DDR12 (3 << 0)
|
|
#define AT91_DDRSDRC_NR (3 << 2) /* Number of Row Bits */
|
|
#define AT91_DDRSDRC_NR_11 (0 << 2)
|
|
#define AT91_DDRSDRC_NR_12 (1 << 2)
|
|
#define AT91_DDRSDRC_NR_13 (2 << 2)
|
|
#define AT91_DDRSDRC_CAS (7 << 4) /* CAS Latency */
|
|
#define AT91_DDRSDRC_CAS_2 (2 << 4)
|
|
#define AT91_DDRSDRC_CAS_3 (3 << 4)
|
|
#define AT91_DDRSDRC_CAS_25 (6 << 4)
|
|
#define AT91_DDRSDRC_DLL (1 << 7) /* Reset DLL */
|
|
#define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */
|
|
|
|
#define AT91_DDRSDRC_T0PR 0x0C /* Timing 0 Register */
|
|
#define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */
|
|
#define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */
|
|
#define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */
|
|
#define AT91_DDRSDRC_TRC (0xf << 12) /* Row cycle delay */
|
|
#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */
|
|
#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */
|
|
#define AT91_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */
|
|
#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */
|
|
|
|
#define AT91_DDRSDRC_T1PR 0x10 /* Timing 1 Register */
|
|
#define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */
|
|
#define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */
|
|
#define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */
|
|
#define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */
|
|
|
|
#define AT91_DDRSDRC_LPR 0x18 /* Low Power Register */
|
|
#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */
|
|
#define AT91_DDRSDRC_LPCB_DISABLE 0
|
|
#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1
|
|
#define AT91_DDRSDRC_LPCB_POWER_DOWN 2
|
|
#define AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN 3
|
|
#define AT91_DDRSDRC_CLKFR (1 << 2) /* Clock Frozen */
|
|
#define AT91_DDRSDRC_PASR (7 << 4) /* Partial Array Self Refresh */
|
|
#define AT91_DDRSDRC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */
|
|
#define AT91_DDRSDRC_DS (3 << 10) /* Drive Strength */
|
|
#define AT91_DDRSDRC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */
|
|
#define AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES (0 << 12)
|
|
#define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12)
|
|
#define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12)
|
|
|
|
#define AT91_DDRSDRC_MDR 0x1C /* Memory Device Register */
|
|
#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */
|
|
#define AT91_DDRSDRC_MD_SDR 0
|
|
#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1
|
|
#define AT91_DDRSDRC_MD_DDR 2
|
|
#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3
|
|
|
|
#define AT91_DDRSDRC_DLLR 0x20 /* DLL Information Register */
|
|
#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */
|
|
#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */
|
|
#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */
|
|
#define AT91_DDRSDRC_SDCOVF (1 << 3) /* Slave Delay Correction Overflow */
|
|
#define AT91_DDRSDRC_SDCUDF (1 << 4) /* Slave Delay Correction Underflow */
|
|
#define AT91_DDRSDRC_SDERF (1 << 5) /* Slave Delay Correction error */
|
|
#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */
|
|
#define AT91_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */
|
|
#define AT91_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */
|
|
|
|
/* Register access macros */
|
|
#define at91_ramc_read(num, reg) \
|
|
at91_sys_read(AT91_DDRSDRC##num + reg)
|
|
#define at91_ramc_write(num, reg, value) \
|
|
at91_sys_write(AT91_DDRSDRC##num + reg, value)
|
|
|
|
|
|
#endif
|