forked from Minki/linux
61a7afa2c4
The idea behind a RAID class is to provide a uniform interface to all RAID subsystems (both hardware and software) in the kernel. To do that, I've made this class a transport class that's entirely subsystem independent (although the matching routines have to match per subsystem, as you'll see looking at the code). I put it in the scsi subdirectory purely because I needed somewhere to play with it, but it's not a scsi specific module. I used a fusion raid card as the test bed for this; with that kind of card, this is the type of class output you get: jejb@titanic> ls -l /sys/class/raid_devices/20\:0\:0\:0/ total 0 lrwxrwxrwx 1 root root 0 Aug 16 17:21 component-0 -> ../../../devices/pci0000:80/0000:80:04.0/host20/target20:1:0/20:1:0:0/ lrwxrwxrwx 1 root root 0 Aug 16 17:21 component-1 -> ../../../devices/pci0000:80/0000:80:04.0/host20/target20:1:1/20:1:1:0/ lrwxrwxrwx 1 root root 0 Aug 16 17:21 device -> ../../../devices/pci0000:80/0000:80:04.0/host20/target20:0:0/20:0:0:0/ -r--r--r-- 1 root root 16384 Aug 16 17:21 level -r--r--r-- 1 root root 16384 Aug 16 17:21 resync -r--r--r-- 1 root root 16384 Aug 16 17:21 state So it's really simple: for a SCSI device representing a hardware raid, it shows the raid level, the array state, the resync % complete (if the state is resyncing) and the underlying components of the RAID (these are exposed in fusion on the virtual channel 1). As you can see, this type of information can be exported by almost anything, including software raid. The more difficult trick, of course, is going to be getting it to perform configuration type actions with writable attributes. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
187 lines
7.2 KiB
Makefile
187 lines
7.2 KiB
Makefile
#
|
|
# Makefile for linux/drivers/scsi
|
|
#
|
|
# 30 May 2000, Christoph Hellwig <hch@infradead.org>
|
|
# Rewritten to use lists instead of if-statements.
|
|
#
|
|
# 20 Sep 2000, Torben Mathiasen <tmm@image.dk>
|
|
# Changed link order to reflect new scsi initialization.
|
|
#
|
|
# *!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!
|
|
# The link order must be, SCSI Core, SCSI HBA drivers, and
|
|
# lastly SCSI peripheral drivers (disk/tape/cdrom/etc.) to
|
|
# satisfy certain initialization assumptions in the SCSI layer.
|
|
# *!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!
|
|
|
|
|
|
CFLAGS_aha152x.o = -DAHA152X_STAT -DAUTOCONF
|
|
CFLAGS_gdth.o = # -DDEBUG_GDTH=2 -D__SERIAL__ -D__COM2__ -DGDTH_STATISTICS
|
|
CFLAGS_seagate.o = -DARBITRATE -DPARITY -DSEAGATE_USE_ASM
|
|
|
|
subdir-$(CONFIG_PCMCIA) += pcmcia
|
|
|
|
obj-$(CONFIG_SCSI) += scsi_mod.o
|
|
|
|
obj-$(CONFIG_RAID_ATTRS) += raid_class.o
|
|
|
|
# --- NOTE ORDERING HERE ---
|
|
# For kernel non-modular link, transport attributes need to
|
|
# be initialised before drivers
|
|
# --------------------------
|
|
obj-$(CONFIG_SCSI_SPI_ATTRS) += scsi_transport_spi.o
|
|
obj-$(CONFIG_SCSI_FC_ATTRS) += scsi_transport_fc.o
|
|
obj-$(CONFIG_SCSI_ISCSI_ATTRS) += scsi_transport_iscsi.o
|
|
|
|
obj-$(CONFIG_SCSI_AMIGA7XX) += amiga7xx.o 53c7xx.o
|
|
obj-$(CONFIG_A3000_SCSI) += a3000.o wd33c93.o
|
|
obj-$(CONFIG_A2091_SCSI) += a2091.o wd33c93.o
|
|
obj-$(CONFIG_GVP11_SCSI) += gvp11.o wd33c93.o
|
|
obj-$(CONFIG_MVME147_SCSI) += mvme147.o wd33c93.o
|
|
obj-$(CONFIG_SGIWD93_SCSI) += sgiwd93.o wd33c93.o
|
|
obj-$(CONFIG_CYBERSTORM_SCSI) += NCR53C9x.o cyberstorm.o
|
|
obj-$(CONFIG_CYBERSTORMII_SCSI) += NCR53C9x.o cyberstormII.o
|
|
obj-$(CONFIG_BLZ2060_SCSI) += NCR53C9x.o blz2060.o
|
|
obj-$(CONFIG_BLZ1230_SCSI) += NCR53C9x.o blz1230.o
|
|
obj-$(CONFIG_FASTLANE_SCSI) += NCR53C9x.o fastlane.o
|
|
obj-$(CONFIG_OKTAGON_SCSI) += NCR53C9x.o oktagon_esp.o oktagon_io.o
|
|
obj-$(CONFIG_ATARI_SCSI) += atari_scsi.o
|
|
obj-$(CONFIG_MAC_SCSI) += mac_scsi.o
|
|
obj-$(CONFIG_SCSI_MAC_ESP) += mac_esp.o NCR53C9x.o
|
|
obj-$(CONFIG_SUN3_SCSI) += sun3_scsi.o sun3_scsi_vme.o
|
|
obj-$(CONFIG_MVME16x_SCSI) += mvme16x.o 53c7xx.o
|
|
obj-$(CONFIG_BVME6000_SCSI) += bvme6000.o 53c7xx.o
|
|
obj-$(CONFIG_SCSI_SIM710) += 53c700.o sim710.o
|
|
obj-$(CONFIG_SCSI_ADVANSYS) += advansys.o
|
|
obj-$(CONFIG_SCSI_PSI240I) += psi240i.o
|
|
obj-$(CONFIG_SCSI_BUSLOGIC) += BusLogic.o
|
|
obj-$(CONFIG_SCSI_DPT_I2O) += dpt_i2o.o
|
|
obj-$(CONFIG_SCSI_U14_34F) += u14-34f.o
|
|
obj-$(CONFIG_SCSI_ULTRASTOR) += ultrastor.o
|
|
obj-$(CONFIG_SCSI_AHA152X) += aha152x.o
|
|
obj-$(CONFIG_SCSI_AHA1542) += aha1542.o
|
|
obj-$(CONFIG_SCSI_AHA1740) += aha1740.o
|
|
obj-$(CONFIG_SCSI_AIC7XXX) += aic7xxx/
|
|
obj-$(CONFIG_SCSI_AIC79XX) += aic7xxx/
|
|
obj-$(CONFIG_SCSI_AACRAID) += aacraid/
|
|
obj-$(CONFIG_SCSI_AIC7XXX_OLD) += aic7xxx_old.o
|
|
obj-$(CONFIG_SCSI_IPS) += ips.o
|
|
obj-$(CONFIG_SCSI_FD_MCS) += fd_mcs.o
|
|
obj-$(CONFIG_SCSI_FUTURE_DOMAIN)+= fdomain.o
|
|
obj-$(CONFIG_SCSI_IN2000) += in2000.o
|
|
obj-$(CONFIG_SCSI_GENERIC_NCR5380) += g_NCR5380.o
|
|
obj-$(CONFIG_SCSI_GENERIC_NCR5380_MMIO) += g_NCR5380_mmio.o
|
|
obj-$(CONFIG_SCSI_NCR53C406A) += NCR53c406a.o
|
|
obj-$(CONFIG_SCSI_NCR_D700) += 53c700.o NCR_D700.o
|
|
obj-$(CONFIG_SCSI_NCR_Q720) += NCR_Q720_mod.o
|
|
obj-$(CONFIG_SCSI_SYM53C416) += sym53c416.o
|
|
obj-$(CONFIG_SCSI_QLOGIC_FAS) += qlogicfas408.o qlogicfas.o
|
|
obj-$(CONFIG_PCMCIA_QLOGIC) += qlogicfas408.o
|
|
obj-$(CONFIG_SCSI_QLOGIC_ISP) += qlogicisp.o
|
|
obj-$(CONFIG_SCSI_QLOGIC_FC) += qlogicfc.o
|
|
obj-$(CONFIG_SCSI_QLOGIC_1280) += qla1280.o
|
|
obj-$(CONFIG_SCSI_QLA2XXX) += qla2xxx/
|
|
obj-$(CONFIG_SCSI_LPFC) += lpfc/
|
|
obj-$(CONFIG_SCSI_PAS16) += pas16.o
|
|
obj-$(CONFIG_SCSI_SEAGATE) += seagate.o
|
|
obj-$(CONFIG_SCSI_FD_8xx) += seagate.o
|
|
obj-$(CONFIG_SCSI_T128) += t128.o
|
|
obj-$(CONFIG_SCSI_DMX3191D) += dmx3191d.o
|
|
obj-$(CONFIG_SCSI_DTC3280) += dtc.o
|
|
obj-$(CONFIG_SCSI_SYM53C8XX_2) += sym53c8xx_2/
|
|
obj-$(CONFIG_SCSI_ZALON) += zalon7xx.o
|
|
obj-$(CONFIG_SCSI_EATA_PIO) += eata_pio.o
|
|
obj-$(CONFIG_SCSI_7000FASST) += wd7000.o
|
|
obj-$(CONFIG_SCSI_MCA_53C9X) += NCR53C9x.o mca_53c9x.o
|
|
obj-$(CONFIG_SCSI_IBMMCA) += ibmmca.o
|
|
obj-$(CONFIG_SCSI_EATA) += eata.o
|
|
obj-$(CONFIG_SCSI_DC395x) += dc395x.o
|
|
obj-$(CONFIG_SCSI_DC390T) += tmscsim.o
|
|
obj-$(CONFIG_MEGARAID_LEGACY) += megaraid.o
|
|
obj-$(CONFIG_MEGARAID_NEWGEN) += megaraid/
|
|
obj-$(CONFIG_SCSI_ACARD) += atp870u.o
|
|
obj-$(CONFIG_SCSI_SUNESP) += esp.o
|
|
obj-$(CONFIG_SCSI_GDTH) += gdth.o
|
|
obj-$(CONFIG_SCSI_INITIO) += initio.o
|
|
obj-$(CONFIG_SCSI_INIA100) += a100u2w.o
|
|
obj-$(CONFIG_SCSI_QLOGICPTI) += qlogicpti.o
|
|
obj-$(CONFIG_BLK_DEV_IDESCSI) += ide-scsi.o
|
|
obj-$(CONFIG_SCSI_MESH) += mesh.o
|
|
obj-$(CONFIG_SCSI_MAC53C94) += mac53c94.o
|
|
obj-$(CONFIG_SCSI_PLUTO) += pluto.o
|
|
obj-$(CONFIG_SCSI_DECNCR) += NCR53C9x.o dec_esp.o
|
|
obj-$(CONFIG_BLK_DEV_3W_XXXX_RAID) += 3w-xxxx.o
|
|
obj-$(CONFIG_SCSI_3W_9XXX) += 3w-9xxx.o
|
|
obj-$(CONFIG_SCSI_PPA) += ppa.o
|
|
obj-$(CONFIG_SCSI_IMM) += imm.o
|
|
obj-$(CONFIG_JAZZ_ESP) += NCR53C9x.o jazz_esp.o
|
|
obj-$(CONFIG_SUN3X_ESP) += NCR53C9x.o sun3x_esp.o
|
|
obj-$(CONFIG_SCSI_DEBUG) += scsi_debug.o
|
|
obj-$(CONFIG_SCSI_FCAL) += fcal.o
|
|
obj-$(CONFIG_SCSI_CPQFCTS) += cpqfc.o
|
|
obj-$(CONFIG_SCSI_LASI700) += 53c700.o lasi700.o
|
|
obj-$(CONFIG_SCSI_NSP32) += nsp32.o
|
|
obj-$(CONFIG_SCSI_IPR) += ipr.o
|
|
obj-$(CONFIG_SCSI_IBMVSCSI) += ibmvscsi/
|
|
obj-$(CONFIG_SCSI_SATA_AHCI) += libata.o ahci.o
|
|
obj-$(CONFIG_SCSI_SATA_SVW) += libata.o sata_svw.o
|
|
obj-$(CONFIG_SCSI_ATA_PIIX) += libata.o ata_piix.o
|
|
obj-$(CONFIG_SCSI_SATA_PROMISE) += libata.o sata_promise.o
|
|
obj-$(CONFIG_SCSI_SATA_QSTOR) += libata.o sata_qstor.o
|
|
obj-$(CONFIG_SCSI_SATA_SIL) += libata.o sata_sil.o
|
|
obj-$(CONFIG_SCSI_SATA_VIA) += libata.o sata_via.o
|
|
obj-$(CONFIG_SCSI_SATA_VITESSE) += libata.o sata_vsc.o
|
|
obj-$(CONFIG_SCSI_SATA_SIS) += libata.o sata_sis.o
|
|
obj-$(CONFIG_SCSI_SATA_SX4) += libata.o sata_sx4.o
|
|
obj-$(CONFIG_SCSI_SATA_NV) += libata.o sata_nv.o
|
|
obj-$(CONFIG_SCSI_SATA_ULI) += libata.o sata_uli.o
|
|
|
|
obj-$(CONFIG_ARM) += arm/
|
|
|
|
obj-$(CONFIG_CHR_DEV_ST) += st.o
|
|
obj-$(CONFIG_CHR_DEV_OSST) += osst.o
|
|
obj-$(CONFIG_BLK_DEV_SD) += sd_mod.o
|
|
obj-$(CONFIG_BLK_DEV_SR) += sr_mod.o
|
|
obj-$(CONFIG_CHR_DEV_SG) += sg.o
|
|
obj-$(CONFIG_CHR_DEV_SCH) += ch.o
|
|
|
|
scsi_mod-y += scsi.o hosts.o scsi_ioctl.o constants.o \
|
|
scsicam.o scsi_error.o scsi_lib.o \
|
|
scsi_scan.o scsi_sysfs.o \
|
|
scsi_devinfo.o
|
|
scsi_mod-$(CONFIG_SYSCTL) += scsi_sysctl.o
|
|
scsi_mod-$(CONFIG_SCSI_PROC_FS) += scsi_proc.o
|
|
|
|
sd_mod-objs := sd.o
|
|
sr_mod-objs := sr.o sr_ioctl.o sr_vendor.o
|
|
ncr53c8xx-flags-$(CONFIG_SCSI_ZALON) \
|
|
:= -DCONFIG_NCR53C8XX_PREFETCH -DSCSI_NCR_BIG_ENDIAN \
|
|
-DCONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
|
|
CFLAGS_ncr53c8xx.o := $(ncr53c8xx-flags-y) $(ncr53c8xx-flags-m)
|
|
zalon7xx-objs := zalon.o ncr53c8xx.o
|
|
NCR_Q720_mod-objs := NCR_Q720.o ncr53c8xx.o
|
|
cpqfc-objs := cpqfcTSinit.o cpqfcTScontrol.o cpqfcTSi2c.o \
|
|
cpqfcTSworker.o cpqfcTStrigger.o
|
|
libata-objs := libata-core.o libata-scsi.o
|
|
|
|
# Files generated that shall be removed upon make clean
|
|
clean-files := 53c7xx_d.h 53c700_d.h \
|
|
53c7xx_u.h 53c700_u.h
|
|
|
|
$(obj)/53c7xx.o: $(obj)/53c7xx_d.h $(obj)/53c7xx_u.h
|
|
$(obj)/53c700.o $(MODVERDIR)/$(obj)/53c700.ver: $(obj)/53c700_d.h
|
|
|
|
# If you want to play with the firmware, uncomment
|
|
# GENERATE_FIRMWARE := 1
|
|
|
|
ifdef GENERATE_FIRMWARE
|
|
|
|
$(obj)/53c7xx_d.h: $(src)/53c7xx.scr $(src)/script_asm.pl
|
|
$(CPP) -traditional -DCHIP=710 - < $< | grep -v '^#' | $(PERL) -s $(src)/script_asm.pl -ncr7x0_family $@ $(@:_d.h=_u.h)
|
|
|
|
$(obj)/53c7xx_u.h: $(obj)/53c7xx_d.h
|
|
|
|
$(obj)/53c700_d.h: $(src)/53c700.scr $(src)/script_asm.pl
|
|
$(PERL) -s $(src)/script_asm.pl -ncr7x0_family $@ $(@:_d.h=_u.h) < $<
|
|
|
|
endif
|