forked from Minki/linux
bf127df3cc
When building this driver for an architecture other than ARCH=arm:
drivers/clocksource/timer-imx-tpm.c:78:20: error: unused function 'tpm_read_sched_clock' [-Werror,-Wunused-function]
static u64 notrace tpm_read_sched_clock(void)
^
1 error generated.
Move the function definition under the existing CONFIG_ARM section so
there is no more warning.
Fixes: 10720e120e
("clocksource/drivers/imx-tpm: Exclude sched clock for ARM64")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220303184212.2356245-1-nathan@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
237 lines
5.6 KiB
C
237 lines
5.6 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
//
|
|
// Copyright 2016 Freescale Semiconductor, Inc.
|
|
// Copyright 2017 NXP
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/clockchips.h>
|
|
#include <linux/clocksource.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/sched_clock.h>
|
|
|
|
#include "timer-of.h"
|
|
|
|
#define TPM_PARAM 0x4
|
|
#define TPM_PARAM_WIDTH_SHIFT 16
|
|
#define TPM_PARAM_WIDTH_MASK (0xff << 16)
|
|
#define TPM_SC 0x10
|
|
#define TPM_SC_CMOD_INC_PER_CNT (0x1 << 3)
|
|
#define TPM_SC_CMOD_DIV_DEFAULT 0x3
|
|
#define TPM_SC_CMOD_DIV_MAX 0x7
|
|
#define TPM_SC_TOF_MASK (0x1 << 7)
|
|
#define TPM_CNT 0x14
|
|
#define TPM_MOD 0x18
|
|
#define TPM_STATUS 0x1c
|
|
#define TPM_STATUS_CH0F BIT(0)
|
|
#define TPM_C0SC 0x20
|
|
#define TPM_C0SC_CHIE BIT(6)
|
|
#define TPM_C0SC_MODE_SHIFT 2
|
|
#define TPM_C0SC_MODE_MASK 0x3c
|
|
#define TPM_C0SC_MODE_SW_COMPARE 0x4
|
|
#define TPM_C0SC_CHF_MASK (0x1 << 7)
|
|
#define TPM_C0V 0x24
|
|
|
|
static int counter_width __ro_after_init;
|
|
static void __iomem *timer_base __ro_after_init;
|
|
|
|
static inline void tpm_timer_disable(void)
|
|
{
|
|
unsigned int val;
|
|
|
|
/* channel disable */
|
|
val = readl(timer_base + TPM_C0SC);
|
|
val &= ~(TPM_C0SC_MODE_MASK | TPM_C0SC_CHIE);
|
|
writel(val, timer_base + TPM_C0SC);
|
|
}
|
|
|
|
static inline void tpm_timer_enable(void)
|
|
{
|
|
unsigned int val;
|
|
|
|
/* channel enabled in sw compare mode */
|
|
val = readl(timer_base + TPM_C0SC);
|
|
val |= (TPM_C0SC_MODE_SW_COMPARE << TPM_C0SC_MODE_SHIFT) |
|
|
TPM_C0SC_CHIE;
|
|
writel(val, timer_base + TPM_C0SC);
|
|
}
|
|
|
|
static inline void tpm_irq_acknowledge(void)
|
|
{
|
|
writel(TPM_STATUS_CH0F, timer_base + TPM_STATUS);
|
|
}
|
|
|
|
static inline unsigned long tpm_read_counter(void)
|
|
{
|
|
return readl(timer_base + TPM_CNT);
|
|
}
|
|
|
|
#if defined(CONFIG_ARM)
|
|
static struct delay_timer tpm_delay_timer;
|
|
|
|
static unsigned long tpm_read_current_timer(void)
|
|
{
|
|
return tpm_read_counter();
|
|
}
|
|
|
|
static u64 notrace tpm_read_sched_clock(void)
|
|
{
|
|
return tpm_read_counter();
|
|
}
|
|
#endif
|
|
|
|
static int tpm_set_next_event(unsigned long delta,
|
|
struct clock_event_device *evt)
|
|
{
|
|
unsigned long next, now;
|
|
|
|
next = tpm_read_counter();
|
|
next += delta;
|
|
writel(next, timer_base + TPM_C0V);
|
|
now = tpm_read_counter();
|
|
|
|
/*
|
|
* NOTE: We observed in a very small probability, the bus fabric
|
|
* contention between GPU and A7 may results a few cycles delay
|
|
* of writing CNT registers which may cause the min_delta event got
|
|
* missed, so we need add a ETIME check here in case it happened.
|
|
*/
|
|
return (int)(next - now) <= 0 ? -ETIME : 0;
|
|
}
|
|
|
|
static int tpm_set_state_oneshot(struct clock_event_device *evt)
|
|
{
|
|
tpm_timer_enable();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tpm_set_state_shutdown(struct clock_event_device *evt)
|
|
{
|
|
tpm_timer_disable();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t tpm_timer_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct clock_event_device *evt = dev_id;
|
|
|
|
tpm_irq_acknowledge();
|
|
|
|
evt->event_handler(evt);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct timer_of to_tpm = {
|
|
.flags = TIMER_OF_IRQ | TIMER_OF_BASE | TIMER_OF_CLOCK,
|
|
.clkevt = {
|
|
.name = "i.MX TPM Timer",
|
|
.rating = 200,
|
|
.features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_DYNIRQ,
|
|
.set_state_shutdown = tpm_set_state_shutdown,
|
|
.set_state_oneshot = tpm_set_state_oneshot,
|
|
.set_next_event = tpm_set_next_event,
|
|
.cpumask = cpu_possible_mask,
|
|
},
|
|
.of_irq = {
|
|
.handler = tpm_timer_interrupt,
|
|
.flags = IRQF_TIMER,
|
|
},
|
|
.of_clk = {
|
|
.name = "per",
|
|
},
|
|
};
|
|
|
|
static int __init tpm_clocksource_init(void)
|
|
{
|
|
#if defined(CONFIG_ARM)
|
|
tpm_delay_timer.read_current_timer = &tpm_read_current_timer;
|
|
tpm_delay_timer.freq = timer_of_rate(&to_tpm) >> 3;
|
|
register_current_timer_delay(&tpm_delay_timer);
|
|
|
|
sched_clock_register(tpm_read_sched_clock, counter_width,
|
|
timer_of_rate(&to_tpm) >> 3);
|
|
#endif
|
|
|
|
return clocksource_mmio_init(timer_base + TPM_CNT,
|
|
"imx-tpm",
|
|
timer_of_rate(&to_tpm) >> 3,
|
|
to_tpm.clkevt.rating,
|
|
counter_width,
|
|
clocksource_mmio_readl_up);
|
|
}
|
|
|
|
static void __init tpm_clockevent_init(void)
|
|
{
|
|
clockevents_config_and_register(&to_tpm.clkevt,
|
|
timer_of_rate(&to_tpm) >> 3,
|
|
300,
|
|
GENMASK(counter_width - 1,
|
|
1));
|
|
}
|
|
|
|
static int __init tpm_timer_init(struct device_node *np)
|
|
{
|
|
struct clk *ipg;
|
|
int ret;
|
|
|
|
ipg = of_clk_get_by_name(np, "ipg");
|
|
if (IS_ERR(ipg)) {
|
|
pr_err("tpm: failed to get ipg clk\n");
|
|
return -ENODEV;
|
|
}
|
|
/* enable clk before accessing registers */
|
|
ret = clk_prepare_enable(ipg);
|
|
if (ret) {
|
|
pr_err("tpm: ipg clock enable failed (%d)\n", ret);
|
|
clk_put(ipg);
|
|
return ret;
|
|
}
|
|
|
|
ret = timer_of_init(np, &to_tpm);
|
|
if (ret)
|
|
return ret;
|
|
|
|
timer_base = timer_of_base(&to_tpm);
|
|
|
|
counter_width = (readl(timer_base + TPM_PARAM)
|
|
& TPM_PARAM_WIDTH_MASK) >> TPM_PARAM_WIDTH_SHIFT;
|
|
/* use rating 200 for 32-bit counter and 150 for 16-bit counter */
|
|
to_tpm.clkevt.rating = counter_width == 0x20 ? 200 : 150;
|
|
|
|
/*
|
|
* Initialize tpm module to a known state
|
|
* 1) Counter disabled
|
|
* 2) TPM counter operates in up counting mode
|
|
* 3) Timer Overflow Interrupt disabled
|
|
* 4) Channel0 disabled
|
|
* 5) DMA transfers disabled
|
|
*/
|
|
/* make sure counter is disabled */
|
|
writel(0, timer_base + TPM_SC);
|
|
/* TOF is W1C */
|
|
writel(TPM_SC_TOF_MASK, timer_base + TPM_SC);
|
|
writel(0, timer_base + TPM_CNT);
|
|
/* CHF is W1C */
|
|
writel(TPM_C0SC_CHF_MASK, timer_base + TPM_C0SC);
|
|
|
|
/*
|
|
* increase per cnt,
|
|
* div 8 for 32-bit counter and div 128 for 16-bit counter
|
|
*/
|
|
writel(TPM_SC_CMOD_INC_PER_CNT |
|
|
(counter_width == 0x20 ?
|
|
TPM_SC_CMOD_DIV_DEFAULT : TPM_SC_CMOD_DIV_MAX),
|
|
timer_base + TPM_SC);
|
|
|
|
/* set MOD register to maximum for free running mode */
|
|
writel(GENMASK(counter_width - 1, 0), timer_base + TPM_MOD);
|
|
|
|
tpm_clockevent_init();
|
|
|
|
return tpm_clocksource_init();
|
|
}
|
|
TIMER_OF_DECLARE(imx7ulp, "fsl,imx7ulp-tpm", tpm_timer_init);
|