linux/drivers/net/wan
Holger Brunck 067bb938da net/wan/fsl_ucc_hdlc: add hdlc-bus support
This adds support for hdlc-bus mode to the fsl_ucc_hdlc driver. This can
be enabled with the "fsl,hdlc-bus" property in the DTS node of the
corresponding ucc.

This aligns the configuration of the UPSMR and GUMR registers to what is
done in our ucc_hdlc driver (that only support hdlc-bus mode) and with
the QuickEngine's documentation for hdlc-bus mode.

GUMR/SYNL is set to AUTO for the busmode as in this case the CD signal
is ignored. The brkpt_support is enabled to set the HBM1 bit in the
CMXUCR register to configure an open-drain connected HDLC bus.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Cc: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18 10:28:39 -04:00
..
lmc Replace <asm/uaccess.h> with <linux/uaccess.h> globally 2016-12-24 11:46:01 -08:00
.gitignore
c101.c net: use core MTU range checking in WAN drivers 2016-10-20 14:51:09 -04:00
cosa.c Annotate hardware config module parameters in drivers/net/wan/ 2017-04-20 12:02:32 +01:00
cosa.h
dlci.c Replace <asm/uaccess.h> with <linux/uaccess.h> globally 2016-12-24 11:46:01 -08:00
dscc4.c Replace <asm/uaccess.h> with <linux/uaccess.h> globally 2016-12-24 11:46:01 -08:00
farsync.c Replace <asm/uaccess.h> with <linux/uaccess.h> globally 2016-12-24 11:46:01 -08:00
farsync.h
fsl_ucc_hdlc.c net/wan/fsl_ucc_hdlc: add hdlc-bus support 2017-05-18 10:28:39 -04:00
fsl_ucc_hdlc.h net/wan/fsl_ucc_hdlc: add hdlc-bus support 2017-05-18 10:28:39 -04:00
hd64570.c Replace <asm/uaccess.h> with <linux/uaccess.h> globally 2016-12-24 11:46:01 -08:00
hd64570.h
hd64572.c drivers: net: generalize napi_complete_done() 2017-01-30 15:10:42 -05:00
hd64572.h
hdlc_cisco.c WAN: HDLC: Call notifiers before and after changing device type 2015-12-05 17:41:42 -05:00
hdlc_fr.c net: use core MTU range checking in WAN drivers 2016-10-20 14:51:09 -04:00
hdlc_ppp.c WAN: HDLC: Call notifiers before and after changing device type 2015-12-05 17:41:42 -05:00
hdlc_raw_eth.c net: make struct net_device::tx_queue_len unsigned int 2017-05-18 10:19:30 -04:00
hdlc_raw.c WAN: HDLC: Call notifiers before and after changing device type 2015-12-05 17:41:42 -05:00
hdlc_x25.c WAN: HDLC: Call notifiers before and after changing device type 2015-12-05 17:41:42 -05:00
hdlc.c net: use core MTU range checking in WAN drivers 2016-10-20 14:51:09 -04:00
hostess_sv11.c Annotate hardware config module parameters in drivers/net/wan/ 2017-04-20 12:02:32 +01:00
ixp4xx_hss.c net: use core MTU range checking in WAN drivers 2016-10-20 14:51:09 -04:00
Kconfig net: wan: slic_ds26522: Allow driver to built if COMPILE_TEST is enabled 2016-10-14 10:11:49 -04:00
lapbether.c Replace <asm/uaccess.h> with <linux/uaccess.h> globally 2016-12-24 11:46:01 -08:00
Makefile Maxim/driver: Add driver for maxim ds26522 2016-06-29 04:05:14 -04:00
n2.c net: use core MTU range checking in WAN drivers 2016-10-20 14:51:09 -04:00
pc300too.c wan: pc300too: abort path on failure 2017-04-24 15:51:31 -04:00
pci200syn.c net: use core MTU range checking in WAN drivers 2016-10-20 14:51:09 -04:00
sbni.c Annotate hardware config module parameters in drivers/net/wan/ 2017-04-20 12:02:32 +01:00
sbni.h
sdla.c Replace <asm/uaccess.h> with <linux/uaccess.h> globally 2016-12-24 11:46:01 -08:00
sealevel.c Annotate hardware config module parameters in drivers/net/wan/ 2017-04-20 12:02:32 +01:00
slic_ds26522.c net: wan: slic_ds26522: Remove .owner field for driver 2017-02-07 11:41:15 -05:00
slic_ds26522.h Maxim/driver: Add driver for maxim ds26522 2016-06-29 04:05:14 -04:00
wanxl.c net: use core MTU range checking in WAN drivers 2016-10-20 14:51:09 -04:00
wanxl.h
wanxlfw.inc_shipped
wanxlfw.S
x25_asy.c net: use core MTU range checking in WAN drivers 2016-10-20 14:51:09 -04:00
x25_asy.h
z85230.c Doc: z8530book: Fix typo in API-z8530-sync-txdma-open.html 2015-07-10 23:45:31 -07:00
z85230.h