forked from Minki/linux
d842a31f12
The driver fails to check the results of DMA mapping and results in the following warning: (with kernel config "CONFIG_DMA_API_DEBUG" enable) ------------[ cut here ]------------ WARNING: at lib/dma-debug.c:937 check_unmap+0x43c/0x7d8() fec 2188000.ethernet: DMA-API: device driver failed to check map error[device address=0x00000000383a8040] [size=2048 bytes] [mapped as single] Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.17-16827-g9cdb0ba-dirty #188 [<80013c4c>] (unwind_backtrace+0x0/0xf8) from [<80011704>] (show_stack+0x10/0x14) [<80011704>] (show_stack+0x10/0x14) from [<80025614>] (warn_slowpath_common+0x4c/0x6c) [<80025614>] (warn_slowpath_common+0x4c/0x6c) from [<800256c8>] (warn_slowpath_fmt+0x30/0x40) [<800256c8>] (warn_slowpath_fmt+0x30/0x40) from [<8026bfdc>] (check_unmap+0x43c/0x7d8) [<8026bfdc>] (check_unmap+0x43c/0x7d8) from [<8026c584>] (debug_dma_unmap_page+0x6c/0x78) [<8026c584>] (debug_dma_unmap_page+0x6c/0x78) from [<8038049c>] (fec_enet_rx_napi+0x254/0x8a8) [<8038049c>] (fec_enet_rx_napi+0x254/0x8a8) from [<804dc8c0>] (net_rx_action+0x94/0x160) [<804dc8c0>] (net_rx_action+0x94/0x160) from [<8002c758>] (__do_softirq+0xe8/0x1d0) [<8002c758>] (__do_softirq+0xe8/0x1d0) from [<8002c8e8>] (do_softirq+0x4c/0x58) [<8002c8e8>] (do_softirq+0x4c/0x58) from [<8002cb50>] (irq_exit+0x90/0xc8) [<8002cb50>] (irq_exit+0x90/0xc8) from [<8000ea88>] (handle_IRQ+0x3c/0x94) [<8000ea88>] (handle_IRQ+0x3c/0x94) from [<8000855c>] (gic_handle_irq+0x28/0x5c) [<8000855c>] (gic_handle_irq+0x28/0x5c) from [<8000de00>] (__irq_svc+0x40/0x50) Exception stack(0x815a5f38 to 0x815a5f80) 5f20: 815a5f80 3b9aca00 5f40: 0fe52383 00000002 0dd8950e 00000002 81e7b080 00000000 00000000 815ac4d8 5f60: 806032ec 00000000 00000017 815a5f80 80059028 8041fc4c 60000013 ffffffff [<8000de00>] (__irq_svc+0x40/0x50) from [<8041fc4c>] (cpuidle_enter_state+0x50/0xf0) [<8041fc4c>] (cpuidle_enter_state+0x50/0xf0) from [<8041fd94>] (cpuidle_idle_call+0xa8/0x14c) [<8041fd94>] (cpuidle_idle_call+0xa8/0x14c) from [<8000edac>] (arch_cpu_idle+0x10/0x4c) [<8000edac>] (arch_cpu_idle+0x10/0x4c) from [<800582f8>] (cpu_startup_entry+0x60/0x130) [<800582f8>] (cpu_startup_entry+0x60/0x130) from [<80bc7a48>] (start_kernel+0x2d0/0x328) [<80bc7a48>] (start_kernel+0x2d0/0x328) from [<10008074>] (0x10008074) ---[ end trace c6edec32436e0042 ]--- Because dma-debug add new interfaces to debug dma mapping errors, pls refer to: http://lwn.net/Articles/516640/ After dma mapping, it must call dma_mapping_error() to check mapping error, otherwise the map_err_type alway is MAP_ERR_NOT_CHECKED, check_unmap() define the mapping is not checked and dump the error msg. So,add dma_mapping_error() checking to fix the WARNING And RX DMA buffers are used repeatedly and the driver copies it into an skb, fec_enet_rx() should not map or unmap, use dma_sync_single_for_cpu()/dma_sync_single_for_device() instead of dma_map_single()/dma_unmap_single(). There have another potential issue: fec_enet_rx() passes the DMA address to __va(). Physical and DMA addresses are *not* the same thing. They may differ if the device is behind an IOMMU or bounce buffering was required, or just because there is a fixed offset between the device and host physical addresses. Also fix it in this patch. ============================================= V2: add net_ratelimit() to limit map err message. use dma_sync_single_for_cpu() instead of dma_map_single(). fix the issue that pass DMA addresses to __va() to get virture address. V1: initial send ============================================= Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
---|---|---|
.. | ||
fs_enet | ||
fec_main.c | ||
fec_mpc52xx_phy.c | ||
fec_mpc52xx.c | ||
fec_mpc52xx.h | ||
fec_ptp.c | ||
fec.h | ||
fsl_pq_mdio.c | ||
gianfar_ethtool.c | ||
gianfar_ptp.c | ||
gianfar_sysfs.c | ||
gianfar.c | ||
gianfar.h | ||
Kconfig | ||
Makefile | ||
ucc_geth_ethtool.c | ||
ucc_geth.c | ||
ucc_geth.h | ||
xgmac_mdio.c |