forked from Minki/linux
4662e82b2c
This new part has the same feature set as previous parts with the addition of MSI-X support. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
1944 lines
53 KiB
C
1944 lines
53 KiB
C
/*******************************************************************************
|
|
|
|
Intel PRO/1000 Linux driver
|
|
Copyright(c) 1999 - 2008 Intel Corporation.
|
|
|
|
This program is free software; you can redistribute it and/or modify it
|
|
under the terms and conditions of the GNU General Public License,
|
|
version 2, as published by the Free Software Foundation.
|
|
|
|
This program is distributed in the hope it will be useful, but WITHOUT
|
|
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
more details.
|
|
|
|
You should have received a copy of the GNU General Public License along with
|
|
this program; if not, write to the Free Software Foundation, Inc.,
|
|
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
|
|
|
|
The full GNU General Public License is included in this distribution in
|
|
the file called "COPYING".
|
|
|
|
Contact Information:
|
|
Linux NICS <linux.nics@intel.com>
|
|
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
|
|
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
|
|
*******************************************************************************/
|
|
|
|
/* ethtool support for e1000 */
|
|
|
|
#include <linux/netdevice.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include "e1000.h"
|
|
|
|
struct e1000_stats {
|
|
char stat_string[ETH_GSTRING_LEN];
|
|
int sizeof_stat;
|
|
int stat_offset;
|
|
};
|
|
|
|
#define E1000_STAT(m) sizeof(((struct e1000_adapter *)0)->m), \
|
|
offsetof(struct e1000_adapter, m)
|
|
static const struct e1000_stats e1000_gstrings_stats[] = {
|
|
{ "rx_packets", E1000_STAT(stats.gprc) },
|
|
{ "tx_packets", E1000_STAT(stats.gptc) },
|
|
{ "rx_bytes", E1000_STAT(stats.gorc) },
|
|
{ "tx_bytes", E1000_STAT(stats.gotc) },
|
|
{ "rx_broadcast", E1000_STAT(stats.bprc) },
|
|
{ "tx_broadcast", E1000_STAT(stats.bptc) },
|
|
{ "rx_multicast", E1000_STAT(stats.mprc) },
|
|
{ "tx_multicast", E1000_STAT(stats.mptc) },
|
|
{ "rx_errors", E1000_STAT(net_stats.rx_errors) },
|
|
{ "tx_errors", E1000_STAT(net_stats.tx_errors) },
|
|
{ "tx_dropped", E1000_STAT(net_stats.tx_dropped) },
|
|
{ "multicast", E1000_STAT(stats.mprc) },
|
|
{ "collisions", E1000_STAT(stats.colc) },
|
|
{ "rx_length_errors", E1000_STAT(net_stats.rx_length_errors) },
|
|
{ "rx_over_errors", E1000_STAT(net_stats.rx_over_errors) },
|
|
{ "rx_crc_errors", E1000_STAT(stats.crcerrs) },
|
|
{ "rx_frame_errors", E1000_STAT(net_stats.rx_frame_errors) },
|
|
{ "rx_no_buffer_count", E1000_STAT(stats.rnbc) },
|
|
{ "rx_missed_errors", E1000_STAT(stats.mpc) },
|
|
{ "tx_aborted_errors", E1000_STAT(stats.ecol) },
|
|
{ "tx_carrier_errors", E1000_STAT(stats.tncrs) },
|
|
{ "tx_fifo_errors", E1000_STAT(net_stats.tx_fifo_errors) },
|
|
{ "tx_heartbeat_errors", E1000_STAT(net_stats.tx_heartbeat_errors) },
|
|
{ "tx_window_errors", E1000_STAT(stats.latecol) },
|
|
{ "tx_abort_late_coll", E1000_STAT(stats.latecol) },
|
|
{ "tx_deferred_ok", E1000_STAT(stats.dc) },
|
|
{ "tx_single_coll_ok", E1000_STAT(stats.scc) },
|
|
{ "tx_multi_coll_ok", E1000_STAT(stats.mcc) },
|
|
{ "tx_timeout_count", E1000_STAT(tx_timeout_count) },
|
|
{ "tx_restart_queue", E1000_STAT(restart_queue) },
|
|
{ "rx_long_length_errors", E1000_STAT(stats.roc) },
|
|
{ "rx_short_length_errors", E1000_STAT(stats.ruc) },
|
|
{ "rx_align_errors", E1000_STAT(stats.algnerrc) },
|
|
{ "tx_tcp_seg_good", E1000_STAT(stats.tsctc) },
|
|
{ "tx_tcp_seg_failed", E1000_STAT(stats.tsctfc) },
|
|
{ "rx_flow_control_xon", E1000_STAT(stats.xonrxc) },
|
|
{ "rx_flow_control_xoff", E1000_STAT(stats.xoffrxc) },
|
|
{ "tx_flow_control_xon", E1000_STAT(stats.xontxc) },
|
|
{ "tx_flow_control_xoff", E1000_STAT(stats.xofftxc) },
|
|
{ "rx_long_byte_count", E1000_STAT(stats.gorc) },
|
|
{ "rx_csum_offload_good", E1000_STAT(hw_csum_good) },
|
|
{ "rx_csum_offload_errors", E1000_STAT(hw_csum_err) },
|
|
{ "rx_header_split", E1000_STAT(rx_hdr_split) },
|
|
{ "alloc_rx_buff_failed", E1000_STAT(alloc_rx_buff_failed) },
|
|
{ "tx_smbus", E1000_STAT(stats.mgptc) },
|
|
{ "rx_smbus", E1000_STAT(stats.mgprc) },
|
|
{ "dropped_smbus", E1000_STAT(stats.mgpdc) },
|
|
{ "rx_dma_failed", E1000_STAT(rx_dma_failed) },
|
|
{ "tx_dma_failed", E1000_STAT(tx_dma_failed) },
|
|
};
|
|
|
|
#define E1000_GLOBAL_STATS_LEN ARRAY_SIZE(e1000_gstrings_stats)
|
|
#define E1000_STATS_LEN (E1000_GLOBAL_STATS_LEN)
|
|
static const char e1000_gstrings_test[][ETH_GSTRING_LEN] = {
|
|
"Register test (offline)", "Eeprom test (offline)",
|
|
"Interrupt test (offline)", "Loopback test (offline)",
|
|
"Link test (on/offline)"
|
|
};
|
|
#define E1000_TEST_LEN ARRAY_SIZE(e1000_gstrings_test)
|
|
|
|
static int e1000_get_settings(struct net_device *netdev,
|
|
struct ethtool_cmd *ecmd)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
u32 status;
|
|
|
|
if (hw->phy.media_type == e1000_media_type_copper) {
|
|
|
|
ecmd->supported = (SUPPORTED_10baseT_Half |
|
|
SUPPORTED_10baseT_Full |
|
|
SUPPORTED_100baseT_Half |
|
|
SUPPORTED_100baseT_Full |
|
|
SUPPORTED_1000baseT_Full |
|
|
SUPPORTED_Autoneg |
|
|
SUPPORTED_TP);
|
|
if (hw->phy.type == e1000_phy_ife)
|
|
ecmd->supported &= ~SUPPORTED_1000baseT_Full;
|
|
ecmd->advertising = ADVERTISED_TP;
|
|
|
|
if (hw->mac.autoneg == 1) {
|
|
ecmd->advertising |= ADVERTISED_Autoneg;
|
|
/* the e1000 autoneg seems to match ethtool nicely */
|
|
ecmd->advertising |= hw->phy.autoneg_advertised;
|
|
}
|
|
|
|
ecmd->port = PORT_TP;
|
|
ecmd->phy_address = hw->phy.addr;
|
|
ecmd->transceiver = XCVR_INTERNAL;
|
|
|
|
} else {
|
|
ecmd->supported = (SUPPORTED_1000baseT_Full |
|
|
SUPPORTED_FIBRE |
|
|
SUPPORTED_Autoneg);
|
|
|
|
ecmd->advertising = (ADVERTISED_1000baseT_Full |
|
|
ADVERTISED_FIBRE |
|
|
ADVERTISED_Autoneg);
|
|
|
|
ecmd->port = PORT_FIBRE;
|
|
ecmd->transceiver = XCVR_EXTERNAL;
|
|
}
|
|
|
|
status = er32(STATUS);
|
|
if (status & E1000_STATUS_LU) {
|
|
if (status & E1000_STATUS_SPEED_1000)
|
|
ecmd->speed = 1000;
|
|
else if (status & E1000_STATUS_SPEED_100)
|
|
ecmd->speed = 100;
|
|
else
|
|
ecmd->speed = 10;
|
|
|
|
if (status & E1000_STATUS_FD)
|
|
ecmd->duplex = DUPLEX_FULL;
|
|
else
|
|
ecmd->duplex = DUPLEX_HALF;
|
|
} else {
|
|
ecmd->speed = -1;
|
|
ecmd->duplex = -1;
|
|
}
|
|
|
|
ecmd->autoneg = ((hw->phy.media_type == e1000_media_type_fiber) ||
|
|
hw->mac.autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
|
|
return 0;
|
|
}
|
|
|
|
static u32 e1000_get_link(struct net_device *netdev)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
u32 status;
|
|
|
|
status = er32(STATUS);
|
|
return (status & E1000_STATUS_LU) ? 1 : 0;
|
|
}
|
|
|
|
static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
|
|
{
|
|
struct e1000_mac_info *mac = &adapter->hw.mac;
|
|
|
|
mac->autoneg = 0;
|
|
|
|
/* Fiber NICs only allow 1000 gbps Full duplex */
|
|
if ((adapter->hw.phy.media_type == e1000_media_type_fiber) &&
|
|
spddplx != (SPEED_1000 + DUPLEX_FULL)) {
|
|
e_err("Unsupported Speed/Duplex configuration\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (spddplx) {
|
|
case SPEED_10 + DUPLEX_HALF:
|
|
mac->forced_speed_duplex = ADVERTISE_10_HALF;
|
|
break;
|
|
case SPEED_10 + DUPLEX_FULL:
|
|
mac->forced_speed_duplex = ADVERTISE_10_FULL;
|
|
break;
|
|
case SPEED_100 + DUPLEX_HALF:
|
|
mac->forced_speed_duplex = ADVERTISE_100_HALF;
|
|
break;
|
|
case SPEED_100 + DUPLEX_FULL:
|
|
mac->forced_speed_duplex = ADVERTISE_100_FULL;
|
|
break;
|
|
case SPEED_1000 + DUPLEX_FULL:
|
|
mac->autoneg = 1;
|
|
adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL;
|
|
break;
|
|
case SPEED_1000 + DUPLEX_HALF: /* not supported */
|
|
default:
|
|
e_err("Unsupported Speed/Duplex configuration\n");
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int e1000_set_settings(struct net_device *netdev,
|
|
struct ethtool_cmd *ecmd)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
|
|
/*
|
|
* When SoL/IDER sessions are active, autoneg/speed/duplex
|
|
* cannot be changed
|
|
*/
|
|
if (e1000_check_reset_block(hw)) {
|
|
e_err("Cannot change link characteristics when SoL/IDER is "
|
|
"active.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
|
|
msleep(1);
|
|
|
|
if (ecmd->autoneg == AUTONEG_ENABLE) {
|
|
hw->mac.autoneg = 1;
|
|
if (hw->phy.media_type == e1000_media_type_fiber)
|
|
hw->phy.autoneg_advertised = ADVERTISED_1000baseT_Full |
|
|
ADVERTISED_FIBRE |
|
|
ADVERTISED_Autoneg;
|
|
else
|
|
hw->phy.autoneg_advertised = ecmd->advertising |
|
|
ADVERTISED_TP |
|
|
ADVERTISED_Autoneg;
|
|
ecmd->advertising = hw->phy.autoneg_advertised;
|
|
if (adapter->fc_autoneg)
|
|
hw->fc.original_type = e1000_fc_default;
|
|
} else {
|
|
if (e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) {
|
|
clear_bit(__E1000_RESETTING, &adapter->state);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/* reset the link */
|
|
|
|
if (netif_running(adapter->netdev)) {
|
|
e1000e_down(adapter);
|
|
e1000e_up(adapter);
|
|
} else {
|
|
e1000e_reset(adapter);
|
|
}
|
|
|
|
clear_bit(__E1000_RESETTING, &adapter->state);
|
|
return 0;
|
|
}
|
|
|
|
static void e1000_get_pauseparam(struct net_device *netdev,
|
|
struct ethtool_pauseparam *pause)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
|
|
pause->autoneg =
|
|
(adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
|
|
|
|
if (hw->fc.type == e1000_fc_rx_pause) {
|
|
pause->rx_pause = 1;
|
|
} else if (hw->fc.type == e1000_fc_tx_pause) {
|
|
pause->tx_pause = 1;
|
|
} else if (hw->fc.type == e1000_fc_full) {
|
|
pause->rx_pause = 1;
|
|
pause->tx_pause = 1;
|
|
}
|
|
}
|
|
|
|
static int e1000_set_pauseparam(struct net_device *netdev,
|
|
struct ethtool_pauseparam *pause)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
int retval = 0;
|
|
|
|
adapter->fc_autoneg = pause->autoneg;
|
|
|
|
while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
|
|
msleep(1);
|
|
|
|
if (pause->rx_pause && pause->tx_pause)
|
|
hw->fc.type = e1000_fc_full;
|
|
else if (pause->rx_pause && !pause->tx_pause)
|
|
hw->fc.type = e1000_fc_rx_pause;
|
|
else if (!pause->rx_pause && pause->tx_pause)
|
|
hw->fc.type = e1000_fc_tx_pause;
|
|
else if (!pause->rx_pause && !pause->tx_pause)
|
|
hw->fc.type = e1000_fc_none;
|
|
|
|
hw->fc.original_type = hw->fc.type;
|
|
|
|
if (adapter->fc_autoneg == AUTONEG_ENABLE) {
|
|
hw->fc.type = e1000_fc_default;
|
|
if (netif_running(adapter->netdev)) {
|
|
e1000e_down(adapter);
|
|
e1000e_up(adapter);
|
|
} else {
|
|
e1000e_reset(adapter);
|
|
}
|
|
} else {
|
|
retval = ((hw->phy.media_type == e1000_media_type_fiber) ?
|
|
hw->mac.ops.setup_link(hw) : e1000e_force_mac_fc(hw));
|
|
}
|
|
|
|
clear_bit(__E1000_RESETTING, &adapter->state);
|
|
return retval;
|
|
}
|
|
|
|
static u32 e1000_get_rx_csum(struct net_device *netdev)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
return (adapter->flags & FLAG_RX_CSUM_ENABLED);
|
|
}
|
|
|
|
static int e1000_set_rx_csum(struct net_device *netdev, u32 data)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
|
|
if (data)
|
|
adapter->flags |= FLAG_RX_CSUM_ENABLED;
|
|
else
|
|
adapter->flags &= ~FLAG_RX_CSUM_ENABLED;
|
|
|
|
if (netif_running(netdev))
|
|
e1000e_reinit_locked(adapter);
|
|
else
|
|
e1000e_reset(adapter);
|
|
return 0;
|
|
}
|
|
|
|
static u32 e1000_get_tx_csum(struct net_device *netdev)
|
|
{
|
|
return ((netdev->features & NETIF_F_HW_CSUM) != 0);
|
|
}
|
|
|
|
static int e1000_set_tx_csum(struct net_device *netdev, u32 data)
|
|
{
|
|
if (data)
|
|
netdev->features |= NETIF_F_HW_CSUM;
|
|
else
|
|
netdev->features &= ~NETIF_F_HW_CSUM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int e1000_set_tso(struct net_device *netdev, u32 data)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
|
|
if (data) {
|
|
netdev->features |= NETIF_F_TSO;
|
|
netdev->features |= NETIF_F_TSO6;
|
|
} else {
|
|
netdev->features &= ~NETIF_F_TSO;
|
|
netdev->features &= ~NETIF_F_TSO6;
|
|
}
|
|
|
|
e_info("TSO is %s\n", data ? "Enabled" : "Disabled");
|
|
adapter->flags |= FLAG_TSO_FORCE;
|
|
return 0;
|
|
}
|
|
|
|
static u32 e1000_get_msglevel(struct net_device *netdev)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
return adapter->msg_enable;
|
|
}
|
|
|
|
static void e1000_set_msglevel(struct net_device *netdev, u32 data)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
adapter->msg_enable = data;
|
|
}
|
|
|
|
static int e1000_get_regs_len(struct net_device *netdev)
|
|
{
|
|
#define E1000_REGS_LEN 32 /* overestimate */
|
|
return E1000_REGS_LEN * sizeof(u32);
|
|
}
|
|
|
|
static void e1000_get_regs(struct net_device *netdev,
|
|
struct ethtool_regs *regs, void *p)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
u32 *regs_buff = p;
|
|
u16 phy_data;
|
|
u8 revision_id;
|
|
|
|
memset(p, 0, E1000_REGS_LEN * sizeof(u32));
|
|
|
|
pci_read_config_byte(adapter->pdev, PCI_REVISION_ID, &revision_id);
|
|
|
|
regs->version = (1 << 24) | (revision_id << 16) | adapter->pdev->device;
|
|
|
|
regs_buff[0] = er32(CTRL);
|
|
regs_buff[1] = er32(STATUS);
|
|
|
|
regs_buff[2] = er32(RCTL);
|
|
regs_buff[3] = er32(RDLEN);
|
|
regs_buff[4] = er32(RDH);
|
|
regs_buff[5] = er32(RDT);
|
|
regs_buff[6] = er32(RDTR);
|
|
|
|
regs_buff[7] = er32(TCTL);
|
|
regs_buff[8] = er32(TDLEN);
|
|
regs_buff[9] = er32(TDH);
|
|
regs_buff[10] = er32(TDT);
|
|
regs_buff[11] = er32(TIDV);
|
|
|
|
regs_buff[12] = adapter->hw.phy.type; /* PHY type (IGP=1, M88=0) */
|
|
if (hw->phy.type == e1000_phy_m88) {
|
|
e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
|
|
regs_buff[13] = (u32)phy_data; /* cable length */
|
|
regs_buff[14] = 0; /* Dummy (to align w/ IGP phy reg dump) */
|
|
regs_buff[15] = 0; /* Dummy (to align w/ IGP phy reg dump) */
|
|
regs_buff[16] = 0; /* Dummy (to align w/ IGP phy reg dump) */
|
|
e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
|
|
regs_buff[17] = (u32)phy_data; /* extended 10bt distance */
|
|
regs_buff[18] = regs_buff[13]; /* cable polarity */
|
|
regs_buff[19] = 0; /* Dummy (to align w/ IGP phy reg dump) */
|
|
regs_buff[20] = regs_buff[17]; /* polarity correction */
|
|
/* phy receive errors */
|
|
regs_buff[22] = adapter->phy_stats.receive_errors;
|
|
regs_buff[23] = regs_buff[13]; /* mdix mode */
|
|
}
|
|
regs_buff[21] = adapter->phy_stats.idle_errors; /* phy idle errors */
|
|
e1e_rphy(hw, PHY_1000T_STATUS, &phy_data);
|
|
regs_buff[24] = (u32)phy_data; /* phy local receiver status */
|
|
regs_buff[25] = regs_buff[24]; /* phy remote receiver status */
|
|
}
|
|
|
|
static int e1000_get_eeprom_len(struct net_device *netdev)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
return adapter->hw.nvm.word_size * 2;
|
|
}
|
|
|
|
static int e1000_get_eeprom(struct net_device *netdev,
|
|
struct ethtool_eeprom *eeprom, u8 *bytes)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
u16 *eeprom_buff;
|
|
int first_word;
|
|
int last_word;
|
|
int ret_val = 0;
|
|
u16 i;
|
|
|
|
if (eeprom->len == 0)
|
|
return -EINVAL;
|
|
|
|
eeprom->magic = adapter->pdev->vendor | (adapter->pdev->device << 16);
|
|
|
|
first_word = eeprom->offset >> 1;
|
|
last_word = (eeprom->offset + eeprom->len - 1) >> 1;
|
|
|
|
eeprom_buff = kmalloc(sizeof(u16) *
|
|
(last_word - first_word + 1), GFP_KERNEL);
|
|
if (!eeprom_buff)
|
|
return -ENOMEM;
|
|
|
|
if (hw->nvm.type == e1000_nvm_eeprom_spi) {
|
|
ret_val = e1000_read_nvm(hw, first_word,
|
|
last_word - first_word + 1,
|
|
eeprom_buff);
|
|
} else {
|
|
for (i = 0; i < last_word - first_word + 1; i++) {
|
|
ret_val = e1000_read_nvm(hw, first_word + i, 1,
|
|
&eeprom_buff[i]);
|
|
if (ret_val) {
|
|
/* a read error occurred, throw away the
|
|
* result */
|
|
memset(eeprom_buff, 0xff, sizeof(eeprom_buff));
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Device's eeprom is always little-endian, word addressable */
|
|
for (i = 0; i < last_word - first_word + 1; i++)
|
|
le16_to_cpus(&eeprom_buff[i]);
|
|
|
|
memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len);
|
|
kfree(eeprom_buff);
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
static int e1000_set_eeprom(struct net_device *netdev,
|
|
struct ethtool_eeprom *eeprom, u8 *bytes)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
u16 *eeprom_buff;
|
|
void *ptr;
|
|
int max_len;
|
|
int first_word;
|
|
int last_word;
|
|
int ret_val = 0;
|
|
u16 i;
|
|
|
|
if (eeprom->len == 0)
|
|
return -EOPNOTSUPP;
|
|
|
|
if (eeprom->magic != (adapter->pdev->vendor | (adapter->pdev->device << 16)))
|
|
return -EFAULT;
|
|
|
|
max_len = hw->nvm.word_size * 2;
|
|
|
|
first_word = eeprom->offset >> 1;
|
|
last_word = (eeprom->offset + eeprom->len - 1) >> 1;
|
|
eeprom_buff = kmalloc(max_len, GFP_KERNEL);
|
|
if (!eeprom_buff)
|
|
return -ENOMEM;
|
|
|
|
ptr = (void *)eeprom_buff;
|
|
|
|
if (eeprom->offset & 1) {
|
|
/* need read/modify/write of first changed EEPROM word */
|
|
/* only the second byte of the word is being modified */
|
|
ret_val = e1000_read_nvm(hw, first_word, 1, &eeprom_buff[0]);
|
|
ptr++;
|
|
}
|
|
if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0))
|
|
/* need read/modify/write of last changed EEPROM word */
|
|
/* only the first byte of the word is being modified */
|
|
ret_val = e1000_read_nvm(hw, last_word, 1,
|
|
&eeprom_buff[last_word - first_word]);
|
|
|
|
/* Device's eeprom is always little-endian, word addressable */
|
|
for (i = 0; i < last_word - first_word + 1; i++)
|
|
le16_to_cpus(&eeprom_buff[i]);
|
|
|
|
memcpy(ptr, bytes, eeprom->len);
|
|
|
|
for (i = 0; i < last_word - first_word + 1; i++)
|
|
eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]);
|
|
|
|
ret_val = e1000_write_nvm(hw, first_word,
|
|
last_word - first_word + 1, eeprom_buff);
|
|
|
|
/*
|
|
* Update the checksum over the first part of the EEPROM if needed
|
|
* and flush shadow RAM for 82573 controllers
|
|
*/
|
|
if ((ret_val == 0) && ((first_word <= NVM_CHECKSUM_REG) ||
|
|
(hw->mac.type == e1000_82574) ||
|
|
(hw->mac.type == e1000_82573)))
|
|
e1000e_update_nvm_checksum(hw);
|
|
|
|
kfree(eeprom_buff);
|
|
return ret_val;
|
|
}
|
|
|
|
static void e1000_get_drvinfo(struct net_device *netdev,
|
|
struct ethtool_drvinfo *drvinfo)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
char firmware_version[32];
|
|
u16 eeprom_data;
|
|
|
|
strncpy(drvinfo->driver, e1000e_driver_name, 32);
|
|
strncpy(drvinfo->version, e1000e_driver_version, 32);
|
|
|
|
/*
|
|
* EEPROM image version # is reported as firmware version # for
|
|
* PCI-E controllers
|
|
*/
|
|
e1000_read_nvm(&adapter->hw, 5, 1, &eeprom_data);
|
|
sprintf(firmware_version, "%d.%d-%d",
|
|
(eeprom_data & 0xF000) >> 12,
|
|
(eeprom_data & 0x0FF0) >> 4,
|
|
eeprom_data & 0x000F);
|
|
|
|
strncpy(drvinfo->fw_version, firmware_version, 32);
|
|
strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
|
|
drvinfo->regdump_len = e1000_get_regs_len(netdev);
|
|
drvinfo->eedump_len = e1000_get_eeprom_len(netdev);
|
|
}
|
|
|
|
static void e1000_get_ringparam(struct net_device *netdev,
|
|
struct ethtool_ringparam *ring)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
struct e1000_ring *tx_ring = adapter->tx_ring;
|
|
struct e1000_ring *rx_ring = adapter->rx_ring;
|
|
|
|
ring->rx_max_pending = E1000_MAX_RXD;
|
|
ring->tx_max_pending = E1000_MAX_TXD;
|
|
ring->rx_mini_max_pending = 0;
|
|
ring->rx_jumbo_max_pending = 0;
|
|
ring->rx_pending = rx_ring->count;
|
|
ring->tx_pending = tx_ring->count;
|
|
ring->rx_mini_pending = 0;
|
|
ring->rx_jumbo_pending = 0;
|
|
}
|
|
|
|
static int e1000_set_ringparam(struct net_device *netdev,
|
|
struct ethtool_ringparam *ring)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
struct e1000_ring *tx_ring, *tx_old;
|
|
struct e1000_ring *rx_ring, *rx_old;
|
|
int err;
|
|
|
|
if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
|
|
return -EINVAL;
|
|
|
|
while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
|
|
msleep(1);
|
|
|
|
if (netif_running(adapter->netdev))
|
|
e1000e_down(adapter);
|
|
|
|
tx_old = adapter->tx_ring;
|
|
rx_old = adapter->rx_ring;
|
|
|
|
err = -ENOMEM;
|
|
tx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
|
|
if (!tx_ring)
|
|
goto err_alloc_tx;
|
|
/*
|
|
* use a memcpy to save any previously configured
|
|
* items like napi structs from having to be
|
|
* reinitialized
|
|
*/
|
|
memcpy(tx_ring, tx_old, sizeof(struct e1000_ring));
|
|
|
|
rx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
|
|
if (!rx_ring)
|
|
goto err_alloc_rx;
|
|
memcpy(rx_ring, rx_old, sizeof(struct e1000_ring));
|
|
|
|
adapter->tx_ring = tx_ring;
|
|
adapter->rx_ring = rx_ring;
|
|
|
|
rx_ring->count = max(ring->rx_pending, (u32)E1000_MIN_RXD);
|
|
rx_ring->count = min(rx_ring->count, (u32)(E1000_MAX_RXD));
|
|
rx_ring->count = ALIGN(rx_ring->count, REQ_RX_DESCRIPTOR_MULTIPLE);
|
|
|
|
tx_ring->count = max(ring->tx_pending, (u32)E1000_MIN_TXD);
|
|
tx_ring->count = min(tx_ring->count, (u32)(E1000_MAX_TXD));
|
|
tx_ring->count = ALIGN(tx_ring->count, REQ_TX_DESCRIPTOR_MULTIPLE);
|
|
|
|
if (netif_running(adapter->netdev)) {
|
|
/* Try to get new resources before deleting old */
|
|
err = e1000e_setup_rx_resources(adapter);
|
|
if (err)
|
|
goto err_setup_rx;
|
|
err = e1000e_setup_tx_resources(adapter);
|
|
if (err)
|
|
goto err_setup_tx;
|
|
|
|
/*
|
|
* restore the old in order to free it,
|
|
* then add in the new
|
|
*/
|
|
adapter->rx_ring = rx_old;
|
|
adapter->tx_ring = tx_old;
|
|
e1000e_free_rx_resources(adapter);
|
|
e1000e_free_tx_resources(adapter);
|
|
kfree(tx_old);
|
|
kfree(rx_old);
|
|
adapter->rx_ring = rx_ring;
|
|
adapter->tx_ring = tx_ring;
|
|
err = e1000e_up(adapter);
|
|
if (err)
|
|
goto err_setup;
|
|
}
|
|
|
|
clear_bit(__E1000_RESETTING, &adapter->state);
|
|
return 0;
|
|
err_setup_tx:
|
|
e1000e_free_rx_resources(adapter);
|
|
err_setup_rx:
|
|
adapter->rx_ring = rx_old;
|
|
adapter->tx_ring = tx_old;
|
|
kfree(rx_ring);
|
|
err_alloc_rx:
|
|
kfree(tx_ring);
|
|
err_alloc_tx:
|
|
e1000e_up(adapter);
|
|
err_setup:
|
|
clear_bit(__E1000_RESETTING, &adapter->state);
|
|
return err;
|
|
}
|
|
|
|
static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data,
|
|
int reg, int offset, u32 mask, u32 write)
|
|
{
|
|
u32 pat, val;
|
|
static const u32 test[] =
|
|
{0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
|
|
for (pat = 0; pat < ARRAY_SIZE(test); pat++) {
|
|
E1000_WRITE_REG_ARRAY(&adapter->hw, reg, offset,
|
|
(test[pat] & write));
|
|
val = E1000_READ_REG_ARRAY(&adapter->hw, reg, offset);
|
|
if (val != (test[pat] & write & mask)) {
|
|
e_err("pattern test reg %04X failed: got 0x%08X "
|
|
"expected 0x%08X\n", reg + offset, val,
|
|
(test[pat] & write & mask));
|
|
*data = reg;
|
|
return 1;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data,
|
|
int reg, u32 mask, u32 write)
|
|
{
|
|
u32 val;
|
|
__ew32(&adapter->hw, reg, write & mask);
|
|
val = __er32(&adapter->hw, reg);
|
|
if ((write & mask) != (val & mask)) {
|
|
e_err("set/check reg %04X test failed: got 0x%08X "
|
|
"expected 0x%08X\n", reg, (val & mask), (write & mask));
|
|
*data = reg;
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
#define REG_PATTERN_TEST_ARRAY(reg, offset, mask, write) \
|
|
do { \
|
|
if (reg_pattern_test(adapter, data, reg, offset, mask, write)) \
|
|
return 1; \
|
|
} while (0)
|
|
#define REG_PATTERN_TEST(reg, mask, write) \
|
|
REG_PATTERN_TEST_ARRAY(reg, 0, mask, write)
|
|
|
|
#define REG_SET_AND_CHECK(reg, mask, write) \
|
|
do { \
|
|
if (reg_set_and_check(adapter, data, reg, mask, write)) \
|
|
return 1; \
|
|
} while (0)
|
|
|
|
static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
|
|
{
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
struct e1000_mac_info *mac = &adapter->hw.mac;
|
|
u32 value;
|
|
u32 before;
|
|
u32 after;
|
|
u32 i;
|
|
u32 toggle;
|
|
|
|
/*
|
|
* The status register is Read Only, so a write should fail.
|
|
* Some bits that get toggled are ignored.
|
|
*/
|
|
switch (mac->type) {
|
|
/* there are several bits on newer hardware that are r/w */
|
|
case e1000_82571:
|
|
case e1000_82572:
|
|
case e1000_80003es2lan:
|
|
toggle = 0x7FFFF3FF;
|
|
break;
|
|
case e1000_82573:
|
|
case e1000_82574:
|
|
case e1000_ich8lan:
|
|
case e1000_ich9lan:
|
|
case e1000_ich10lan:
|
|
toggle = 0x7FFFF033;
|
|
break;
|
|
default:
|
|
toggle = 0xFFFFF833;
|
|
break;
|
|
}
|
|
|
|
before = er32(STATUS);
|
|
value = (er32(STATUS) & toggle);
|
|
ew32(STATUS, toggle);
|
|
after = er32(STATUS) & toggle;
|
|
if (value != after) {
|
|
e_err("failed STATUS register test got: 0x%08X expected: "
|
|
"0x%08X\n", after, value);
|
|
*data = 1;
|
|
return 1;
|
|
}
|
|
/* restore previous status */
|
|
ew32(STATUS, before);
|
|
|
|
if (!(adapter->flags & FLAG_IS_ICH)) {
|
|
REG_PATTERN_TEST(E1000_FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
|
|
REG_PATTERN_TEST(E1000_FCAH, 0x0000FFFF, 0xFFFFFFFF);
|
|
REG_PATTERN_TEST(E1000_FCT, 0x0000FFFF, 0xFFFFFFFF);
|
|
REG_PATTERN_TEST(E1000_VET, 0x0000FFFF, 0xFFFFFFFF);
|
|
}
|
|
|
|
REG_PATTERN_TEST(E1000_RDTR, 0x0000FFFF, 0xFFFFFFFF);
|
|
REG_PATTERN_TEST(E1000_RDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
|
|
REG_PATTERN_TEST(E1000_RDLEN, 0x000FFF80, 0x000FFFFF);
|
|
REG_PATTERN_TEST(E1000_RDH, 0x0000FFFF, 0x0000FFFF);
|
|
REG_PATTERN_TEST(E1000_RDT, 0x0000FFFF, 0x0000FFFF);
|
|
REG_PATTERN_TEST(E1000_FCRTH, 0x0000FFF8, 0x0000FFF8);
|
|
REG_PATTERN_TEST(E1000_FCTTV, 0x0000FFFF, 0x0000FFFF);
|
|
REG_PATTERN_TEST(E1000_TIPG, 0x3FFFFFFF, 0x3FFFFFFF);
|
|
REG_PATTERN_TEST(E1000_TDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
|
|
REG_PATTERN_TEST(E1000_TDLEN, 0x000FFF80, 0x000FFFFF);
|
|
|
|
REG_SET_AND_CHECK(E1000_RCTL, 0xFFFFFFFF, 0x00000000);
|
|
|
|
before = ((adapter->flags & FLAG_IS_ICH) ? 0x06C3B33E : 0x06DFB3FE);
|
|
REG_SET_AND_CHECK(E1000_RCTL, before, 0x003FFFFB);
|
|
REG_SET_AND_CHECK(E1000_TCTL, 0xFFFFFFFF, 0x00000000);
|
|
|
|
REG_SET_AND_CHECK(E1000_RCTL, before, 0xFFFFFFFF);
|
|
REG_PATTERN_TEST(E1000_RDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
|
|
if (!(adapter->flags & FLAG_IS_ICH))
|
|
REG_PATTERN_TEST(E1000_TXCW, 0xC000FFFF, 0x0000FFFF);
|
|
REG_PATTERN_TEST(E1000_TDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
|
|
REG_PATTERN_TEST(E1000_TIDV, 0x0000FFFF, 0x0000FFFF);
|
|
for (i = 0; i < mac->rar_entry_count; i++)
|
|
REG_PATTERN_TEST_ARRAY(E1000_RA, ((i << 1) + 1),
|
|
((mac->type == e1000_ich10lan) ?
|
|
0x8007FFFF : 0x8003FFFF),
|
|
0xFFFFFFFF);
|
|
|
|
for (i = 0; i < mac->mta_reg_count; i++)
|
|
REG_PATTERN_TEST_ARRAY(E1000_MTA, i, 0xFFFFFFFF, 0xFFFFFFFF);
|
|
|
|
*data = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data)
|
|
{
|
|
u16 temp;
|
|
u16 checksum = 0;
|
|
u16 i;
|
|
|
|
*data = 0;
|
|
/* Read and add up the contents of the EEPROM */
|
|
for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
|
|
if ((e1000_read_nvm(&adapter->hw, i, 1, &temp)) < 0) {
|
|
*data = 1;
|
|
break;
|
|
}
|
|
checksum += temp;
|
|
}
|
|
|
|
/* If Checksum is not Correct return error else test passed */
|
|
if ((checksum != (u16) NVM_SUM) && !(*data))
|
|
*data = 2;
|
|
|
|
return *data;
|
|
}
|
|
|
|
static irqreturn_t e1000_test_intr(int irq, void *data)
|
|
{
|
|
struct net_device *netdev = (struct net_device *) data;
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
|
|
adapter->test_icr |= er32(ICR);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
|
|
{
|
|
struct net_device *netdev = adapter->netdev;
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
u32 mask;
|
|
u32 shared_int = 1;
|
|
u32 irq = adapter->pdev->irq;
|
|
int i;
|
|
int ret_val = 0;
|
|
int int_mode = E1000E_INT_MODE_LEGACY;
|
|
|
|
*data = 0;
|
|
|
|
/* NOTE: we don't test MSI/MSI-X interrupts here, yet */
|
|
if (adapter->int_mode == E1000E_INT_MODE_MSIX) {
|
|
int_mode = adapter->int_mode;
|
|
e1000e_reset_interrupt_capability(adapter);
|
|
adapter->int_mode = E1000E_INT_MODE_LEGACY;
|
|
e1000e_set_interrupt_capability(adapter);
|
|
}
|
|
/* Hook up test interrupt handler just for this test */
|
|
if (!request_irq(irq, &e1000_test_intr, IRQF_PROBE_SHARED, netdev->name,
|
|
netdev)) {
|
|
shared_int = 0;
|
|
} else if (request_irq(irq, &e1000_test_intr, IRQF_SHARED,
|
|
netdev->name, netdev)) {
|
|
*data = 1;
|
|
ret_val = -1;
|
|
goto out;
|
|
}
|
|
e_info("testing %s interrupt\n", (shared_int ? "shared" : "unshared"));
|
|
|
|
/* Disable all the interrupts */
|
|
ew32(IMC, 0xFFFFFFFF);
|
|
msleep(10);
|
|
|
|
/* Test each interrupt */
|
|
for (i = 0; i < 10; i++) {
|
|
/* Interrupt to test */
|
|
mask = 1 << i;
|
|
|
|
if (adapter->flags & FLAG_IS_ICH) {
|
|
switch (mask) {
|
|
case E1000_ICR_RXSEQ:
|
|
continue;
|
|
case 0x00000100:
|
|
if (adapter->hw.mac.type == e1000_ich8lan ||
|
|
adapter->hw.mac.type == e1000_ich9lan)
|
|
continue;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!shared_int) {
|
|
/*
|
|
* Disable the interrupt to be reported in
|
|
* the cause register and then force the same
|
|
* interrupt and see if one gets posted. If
|
|
* an interrupt was posted to the bus, the
|
|
* test failed.
|
|
*/
|
|
adapter->test_icr = 0;
|
|
ew32(IMC, mask);
|
|
ew32(ICS, mask);
|
|
msleep(10);
|
|
|
|
if (adapter->test_icr & mask) {
|
|
*data = 3;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Enable the interrupt to be reported in
|
|
* the cause register and then force the same
|
|
* interrupt and see if one gets posted. If
|
|
* an interrupt was not posted to the bus, the
|
|
* test failed.
|
|
*/
|
|
adapter->test_icr = 0;
|
|
ew32(IMS, mask);
|
|
ew32(ICS, mask);
|
|
msleep(10);
|
|
|
|
if (!(adapter->test_icr & mask)) {
|
|
*data = 4;
|
|
break;
|
|
}
|
|
|
|
if (!shared_int) {
|
|
/*
|
|
* Disable the other interrupts to be reported in
|
|
* the cause register and then force the other
|
|
* interrupts and see if any get posted. If
|
|
* an interrupt was posted to the bus, the
|
|
* test failed.
|
|
*/
|
|
adapter->test_icr = 0;
|
|
ew32(IMC, ~mask & 0x00007FFF);
|
|
ew32(ICS, ~mask & 0x00007FFF);
|
|
msleep(10);
|
|
|
|
if (adapter->test_icr) {
|
|
*data = 5;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Disable all the interrupts */
|
|
ew32(IMC, 0xFFFFFFFF);
|
|
msleep(10);
|
|
|
|
/* Unhook test interrupt handler */
|
|
free_irq(irq, netdev);
|
|
|
|
out:
|
|
if (int_mode == E1000E_INT_MODE_MSIX) {
|
|
e1000e_reset_interrupt_capability(adapter);
|
|
adapter->int_mode = int_mode;
|
|
e1000e_set_interrupt_capability(adapter);
|
|
}
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
static void e1000_free_desc_rings(struct e1000_adapter *adapter)
|
|
{
|
|
struct e1000_ring *tx_ring = &adapter->test_tx_ring;
|
|
struct e1000_ring *rx_ring = &adapter->test_rx_ring;
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
int i;
|
|
|
|
if (tx_ring->desc && tx_ring->buffer_info) {
|
|
for (i = 0; i < tx_ring->count; i++) {
|
|
if (tx_ring->buffer_info[i].dma)
|
|
pci_unmap_single(pdev,
|
|
tx_ring->buffer_info[i].dma,
|
|
tx_ring->buffer_info[i].length,
|
|
PCI_DMA_TODEVICE);
|
|
if (tx_ring->buffer_info[i].skb)
|
|
dev_kfree_skb(tx_ring->buffer_info[i].skb);
|
|
}
|
|
}
|
|
|
|
if (rx_ring->desc && rx_ring->buffer_info) {
|
|
for (i = 0; i < rx_ring->count; i++) {
|
|
if (rx_ring->buffer_info[i].dma)
|
|
pci_unmap_single(pdev,
|
|
rx_ring->buffer_info[i].dma,
|
|
2048, PCI_DMA_FROMDEVICE);
|
|
if (rx_ring->buffer_info[i].skb)
|
|
dev_kfree_skb(rx_ring->buffer_info[i].skb);
|
|
}
|
|
}
|
|
|
|
if (tx_ring->desc) {
|
|
dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc,
|
|
tx_ring->dma);
|
|
tx_ring->desc = NULL;
|
|
}
|
|
if (rx_ring->desc) {
|
|
dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
|
|
rx_ring->dma);
|
|
rx_ring->desc = NULL;
|
|
}
|
|
|
|
kfree(tx_ring->buffer_info);
|
|
tx_ring->buffer_info = NULL;
|
|
kfree(rx_ring->buffer_info);
|
|
rx_ring->buffer_info = NULL;
|
|
}
|
|
|
|
static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
|
|
{
|
|
struct e1000_ring *tx_ring = &adapter->test_tx_ring;
|
|
struct e1000_ring *rx_ring = &adapter->test_rx_ring;
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
u32 rctl;
|
|
int i;
|
|
int ret_val;
|
|
|
|
/* Setup Tx descriptor ring and Tx buffers */
|
|
|
|
if (!tx_ring->count)
|
|
tx_ring->count = E1000_DEFAULT_TXD;
|
|
|
|
tx_ring->buffer_info = kcalloc(tx_ring->count,
|
|
sizeof(struct e1000_buffer),
|
|
GFP_KERNEL);
|
|
if (!(tx_ring->buffer_info)) {
|
|
ret_val = 1;
|
|
goto err_nomem;
|
|
}
|
|
|
|
tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc);
|
|
tx_ring->size = ALIGN(tx_ring->size, 4096);
|
|
tx_ring->desc = dma_alloc_coherent(&pdev->dev, tx_ring->size,
|
|
&tx_ring->dma, GFP_KERNEL);
|
|
if (!tx_ring->desc) {
|
|
ret_val = 2;
|
|
goto err_nomem;
|
|
}
|
|
tx_ring->next_to_use = 0;
|
|
tx_ring->next_to_clean = 0;
|
|
|
|
ew32(TDBAL, ((u64) tx_ring->dma & 0x00000000FFFFFFFF));
|
|
ew32(TDBAH, ((u64) tx_ring->dma >> 32));
|
|
ew32(TDLEN, tx_ring->count * sizeof(struct e1000_tx_desc));
|
|
ew32(TDH, 0);
|
|
ew32(TDT, 0);
|
|
ew32(TCTL, E1000_TCTL_PSP | E1000_TCTL_EN | E1000_TCTL_MULR |
|
|
E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT |
|
|
E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT);
|
|
|
|
for (i = 0; i < tx_ring->count; i++) {
|
|
struct e1000_tx_desc *tx_desc = E1000_TX_DESC(*tx_ring, i);
|
|
struct sk_buff *skb;
|
|
unsigned int skb_size = 1024;
|
|
|
|
skb = alloc_skb(skb_size, GFP_KERNEL);
|
|
if (!skb) {
|
|
ret_val = 3;
|
|
goto err_nomem;
|
|
}
|
|
skb_put(skb, skb_size);
|
|
tx_ring->buffer_info[i].skb = skb;
|
|
tx_ring->buffer_info[i].length = skb->len;
|
|
tx_ring->buffer_info[i].dma =
|
|
pci_map_single(pdev, skb->data, skb->len,
|
|
PCI_DMA_TODEVICE);
|
|
if (pci_dma_mapping_error(pdev, tx_ring->buffer_info[i].dma)) {
|
|
ret_val = 4;
|
|
goto err_nomem;
|
|
}
|
|
tx_desc->buffer_addr = cpu_to_le64(tx_ring->buffer_info[i].dma);
|
|
tx_desc->lower.data = cpu_to_le32(skb->len);
|
|
tx_desc->lower.data |= cpu_to_le32(E1000_TXD_CMD_EOP |
|
|
E1000_TXD_CMD_IFCS |
|
|
E1000_TXD_CMD_RS);
|
|
tx_desc->upper.data = 0;
|
|
}
|
|
|
|
/* Setup Rx descriptor ring and Rx buffers */
|
|
|
|
if (!rx_ring->count)
|
|
rx_ring->count = E1000_DEFAULT_RXD;
|
|
|
|
rx_ring->buffer_info = kcalloc(rx_ring->count,
|
|
sizeof(struct e1000_buffer),
|
|
GFP_KERNEL);
|
|
if (!(rx_ring->buffer_info)) {
|
|
ret_val = 5;
|
|
goto err_nomem;
|
|
}
|
|
|
|
rx_ring->size = rx_ring->count * sizeof(struct e1000_rx_desc);
|
|
rx_ring->desc = dma_alloc_coherent(&pdev->dev, rx_ring->size,
|
|
&rx_ring->dma, GFP_KERNEL);
|
|
if (!rx_ring->desc) {
|
|
ret_val = 6;
|
|
goto err_nomem;
|
|
}
|
|
rx_ring->next_to_use = 0;
|
|
rx_ring->next_to_clean = 0;
|
|
|
|
rctl = er32(RCTL);
|
|
ew32(RCTL, rctl & ~E1000_RCTL_EN);
|
|
ew32(RDBAL, ((u64) rx_ring->dma & 0xFFFFFFFF));
|
|
ew32(RDBAH, ((u64) rx_ring->dma >> 32));
|
|
ew32(RDLEN, rx_ring->size);
|
|
ew32(RDH, 0);
|
|
ew32(RDT, 0);
|
|
rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_SZ_2048 |
|
|
E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_LPE |
|
|
E1000_RCTL_SBP | E1000_RCTL_SECRC |
|
|
E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
|
|
(adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
|
|
ew32(RCTL, rctl);
|
|
|
|
for (i = 0; i < rx_ring->count; i++) {
|
|
struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rx_ring, i);
|
|
struct sk_buff *skb;
|
|
|
|
skb = alloc_skb(2048 + NET_IP_ALIGN, GFP_KERNEL);
|
|
if (!skb) {
|
|
ret_val = 7;
|
|
goto err_nomem;
|
|
}
|
|
skb_reserve(skb, NET_IP_ALIGN);
|
|
rx_ring->buffer_info[i].skb = skb;
|
|
rx_ring->buffer_info[i].dma =
|
|
pci_map_single(pdev, skb->data, 2048,
|
|
PCI_DMA_FROMDEVICE);
|
|
if (pci_dma_mapping_error(pdev, rx_ring->buffer_info[i].dma)) {
|
|
ret_val = 8;
|
|
goto err_nomem;
|
|
}
|
|
rx_desc->buffer_addr =
|
|
cpu_to_le64(rx_ring->buffer_info[i].dma);
|
|
memset(skb->data, 0x00, skb->len);
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_nomem:
|
|
e1000_free_desc_rings(adapter);
|
|
return ret_val;
|
|
}
|
|
|
|
static void e1000_phy_disable_receiver(struct e1000_adapter *adapter)
|
|
{
|
|
/* Write out to PHY registers 29 and 30 to disable the Receiver. */
|
|
e1e_wphy(&adapter->hw, 29, 0x001F);
|
|
e1e_wphy(&adapter->hw, 30, 0x8FFC);
|
|
e1e_wphy(&adapter->hw, 29, 0x001A);
|
|
e1e_wphy(&adapter->hw, 30, 0x8FF0);
|
|
}
|
|
|
|
static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
|
|
{
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
u32 ctrl_reg = 0;
|
|
u32 stat_reg = 0;
|
|
u16 phy_reg = 0;
|
|
|
|
hw->mac.autoneg = 0;
|
|
|
|
if (hw->phy.type == e1000_phy_m88) {
|
|
/* Auto-MDI/MDIX Off */
|
|
e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, 0x0808);
|
|
/* reset to update Auto-MDI/MDIX */
|
|
e1e_wphy(hw, PHY_CONTROL, 0x9140);
|
|
/* autoneg off */
|
|
e1e_wphy(hw, PHY_CONTROL, 0x8140);
|
|
} else if (hw->phy.type == e1000_phy_gg82563)
|
|
e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x1CC);
|
|
|
|
ctrl_reg = er32(CTRL);
|
|
|
|
switch (hw->phy.type) {
|
|
case e1000_phy_ife:
|
|
/* force 100, set loopback */
|
|
e1e_wphy(hw, PHY_CONTROL, 0x6100);
|
|
|
|
/* Now set up the MAC to the same speed/duplex as the PHY. */
|
|
ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
|
|
ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
|
|
E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
|
|
E1000_CTRL_SPD_100 |/* Force Speed to 100 */
|
|
E1000_CTRL_FD); /* Force Duplex to FULL */
|
|
break;
|
|
case e1000_phy_bm:
|
|
/* Set Default MAC Interface speed to 1GB */
|
|
e1e_rphy(hw, PHY_REG(2, 21), &phy_reg);
|
|
phy_reg &= ~0x0007;
|
|
phy_reg |= 0x006;
|
|
e1e_wphy(hw, PHY_REG(2, 21), phy_reg);
|
|
/* Assert SW reset for above settings to take effect */
|
|
e1000e_commit_phy(hw);
|
|
mdelay(1);
|
|
/* Force Full Duplex */
|
|
e1e_rphy(hw, PHY_REG(769, 16), &phy_reg);
|
|
e1e_wphy(hw, PHY_REG(769, 16), phy_reg | 0x000C);
|
|
/* Set Link Up (in force link) */
|
|
e1e_rphy(hw, PHY_REG(776, 16), &phy_reg);
|
|
e1e_wphy(hw, PHY_REG(776, 16), phy_reg | 0x0040);
|
|
/* Force Link */
|
|
e1e_rphy(hw, PHY_REG(769, 16), &phy_reg);
|
|
e1e_wphy(hw, PHY_REG(769, 16), phy_reg | 0x0040);
|
|
/* Set Early Link Enable */
|
|
e1e_rphy(hw, PHY_REG(769, 20), &phy_reg);
|
|
e1e_wphy(hw, PHY_REG(769, 20), phy_reg | 0x0400);
|
|
/* fall through */
|
|
default:
|
|
/* force 1000, set loopback */
|
|
e1e_wphy(hw, PHY_CONTROL, 0x4140);
|
|
mdelay(250);
|
|
|
|
/* Now set up the MAC to the same speed/duplex as the PHY. */
|
|
ctrl_reg = er32(CTRL);
|
|
ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
|
|
ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
|
|
E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
|
|
E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
|
|
E1000_CTRL_FD); /* Force Duplex to FULL */
|
|
|
|
if (adapter->flags & FLAG_IS_ICH)
|
|
ctrl_reg |= E1000_CTRL_SLU; /* Set Link Up */
|
|
}
|
|
|
|
if (hw->phy.media_type == e1000_media_type_copper &&
|
|
hw->phy.type == e1000_phy_m88) {
|
|
ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
|
|
} else {
|
|
/*
|
|
* Set the ILOS bit on the fiber Nic if half duplex link is
|
|
* detected.
|
|
*/
|
|
stat_reg = er32(STATUS);
|
|
if ((stat_reg & E1000_STATUS_FD) == 0)
|
|
ctrl_reg |= (E1000_CTRL_ILOS | E1000_CTRL_SLU);
|
|
}
|
|
|
|
ew32(CTRL, ctrl_reg);
|
|
|
|
/*
|
|
* Disable the receiver on the PHY so when a cable is plugged in, the
|
|
* PHY does not begin to autoneg when a cable is reconnected to the NIC.
|
|
*/
|
|
if (hw->phy.type == e1000_phy_m88)
|
|
e1000_phy_disable_receiver(adapter);
|
|
|
|
udelay(500);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int e1000_set_82571_fiber_loopback(struct e1000_adapter *adapter)
|
|
{
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
u32 ctrl = er32(CTRL);
|
|
int link = 0;
|
|
|
|
/* special requirements for 82571/82572 fiber adapters */
|
|
|
|
/*
|
|
* jump through hoops to make sure link is up because serdes
|
|
* link is hardwired up
|
|
*/
|
|
ctrl |= E1000_CTRL_SLU;
|
|
ew32(CTRL, ctrl);
|
|
|
|
/* disable autoneg */
|
|
ctrl = er32(TXCW);
|
|
ctrl &= ~(1 << 31);
|
|
ew32(TXCW, ctrl);
|
|
|
|
link = (er32(STATUS) & E1000_STATUS_LU);
|
|
|
|
if (!link) {
|
|
/* set invert loss of signal */
|
|
ctrl = er32(CTRL);
|
|
ctrl |= E1000_CTRL_ILOS;
|
|
ew32(CTRL, ctrl);
|
|
}
|
|
|
|
/*
|
|
* special write to serdes control register to enable SerDes analog
|
|
* loopback
|
|
*/
|
|
#define E1000_SERDES_LB_ON 0x410
|
|
ew32(SCTL, E1000_SERDES_LB_ON);
|
|
msleep(10);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* only call this for fiber/serdes connections to es2lan */
|
|
static int e1000_set_es2lan_mac_loopback(struct e1000_adapter *adapter)
|
|
{
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
u32 ctrlext = er32(CTRL_EXT);
|
|
u32 ctrl = er32(CTRL);
|
|
|
|
/*
|
|
* save CTRL_EXT to restore later, reuse an empty variable (unused
|
|
* on mac_type 80003es2lan)
|
|
*/
|
|
adapter->tx_fifo_head = ctrlext;
|
|
|
|
/* clear the serdes mode bits, putting the device into mac loopback */
|
|
ctrlext &= ~E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES;
|
|
ew32(CTRL_EXT, ctrlext);
|
|
|
|
/* force speed to 1000/FD, link up */
|
|
ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
|
|
ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX |
|
|
E1000_CTRL_SPD_1000 | E1000_CTRL_FD);
|
|
ew32(CTRL, ctrl);
|
|
|
|
/* set mac loopback */
|
|
ctrl = er32(RCTL);
|
|
ctrl |= E1000_RCTL_LBM_MAC;
|
|
ew32(RCTL, ctrl);
|
|
|
|
/* set testing mode parameters (no need to reset later) */
|
|
#define KMRNCTRLSTA_OPMODE (0x1F << 16)
|
|
#define KMRNCTRLSTA_OPMODE_1GB_FD_GMII 0x0582
|
|
ew32(KMRNCTRLSTA,
|
|
(KMRNCTRLSTA_OPMODE | KMRNCTRLSTA_OPMODE_1GB_FD_GMII));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int e1000_setup_loopback_test(struct e1000_adapter *adapter)
|
|
{
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
u32 rctl;
|
|
|
|
if (hw->phy.media_type == e1000_media_type_fiber ||
|
|
hw->phy.media_type == e1000_media_type_internal_serdes) {
|
|
switch (hw->mac.type) {
|
|
case e1000_80003es2lan:
|
|
return e1000_set_es2lan_mac_loopback(adapter);
|
|
break;
|
|
case e1000_82571:
|
|
case e1000_82572:
|
|
return e1000_set_82571_fiber_loopback(adapter);
|
|
break;
|
|
default:
|
|
rctl = er32(RCTL);
|
|
rctl |= E1000_RCTL_LBM_TCVR;
|
|
ew32(RCTL, rctl);
|
|
return 0;
|
|
}
|
|
} else if (hw->phy.media_type == e1000_media_type_copper) {
|
|
return e1000_integrated_phy_loopback(adapter);
|
|
}
|
|
|
|
return 7;
|
|
}
|
|
|
|
static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
|
|
{
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
u32 rctl;
|
|
u16 phy_reg;
|
|
|
|
rctl = er32(RCTL);
|
|
rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
|
|
ew32(RCTL, rctl);
|
|
|
|
switch (hw->mac.type) {
|
|
case e1000_80003es2lan:
|
|
if (hw->phy.media_type == e1000_media_type_fiber ||
|
|
hw->phy.media_type == e1000_media_type_internal_serdes) {
|
|
/* restore CTRL_EXT, stealing space from tx_fifo_head */
|
|
ew32(CTRL_EXT, adapter->tx_fifo_head);
|
|
adapter->tx_fifo_head = 0;
|
|
}
|
|
/* fall through */
|
|
case e1000_82571:
|
|
case e1000_82572:
|
|
if (hw->phy.media_type == e1000_media_type_fiber ||
|
|
hw->phy.media_type == e1000_media_type_internal_serdes) {
|
|
#define E1000_SERDES_LB_OFF 0x400
|
|
ew32(SCTL, E1000_SERDES_LB_OFF);
|
|
msleep(10);
|
|
break;
|
|
}
|
|
/* Fall Through */
|
|
default:
|
|
hw->mac.autoneg = 1;
|
|
if (hw->phy.type == e1000_phy_gg82563)
|
|
e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x180);
|
|
e1e_rphy(hw, PHY_CONTROL, &phy_reg);
|
|
if (phy_reg & MII_CR_LOOPBACK) {
|
|
phy_reg &= ~MII_CR_LOOPBACK;
|
|
e1e_wphy(hw, PHY_CONTROL, phy_reg);
|
|
e1000e_commit_phy(hw);
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void e1000_create_lbtest_frame(struct sk_buff *skb,
|
|
unsigned int frame_size)
|
|
{
|
|
memset(skb->data, 0xFF, frame_size);
|
|
frame_size &= ~1;
|
|
memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1);
|
|
memset(&skb->data[frame_size / 2 + 10], 0xBE, 1);
|
|
memset(&skb->data[frame_size / 2 + 12], 0xAF, 1);
|
|
}
|
|
|
|
static int e1000_check_lbtest_frame(struct sk_buff *skb,
|
|
unsigned int frame_size)
|
|
{
|
|
frame_size &= ~1;
|
|
if (*(skb->data + 3) == 0xFF)
|
|
if ((*(skb->data + frame_size / 2 + 10) == 0xBE) &&
|
|
(*(skb->data + frame_size / 2 + 12) == 0xAF))
|
|
return 0;
|
|
return 13;
|
|
}
|
|
|
|
static int e1000_run_loopback_test(struct e1000_adapter *adapter)
|
|
{
|
|
struct e1000_ring *tx_ring = &adapter->test_tx_ring;
|
|
struct e1000_ring *rx_ring = &adapter->test_rx_ring;
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
int i, j, k, l;
|
|
int lc;
|
|
int good_cnt;
|
|
int ret_val = 0;
|
|
unsigned long time;
|
|
|
|
ew32(RDT, rx_ring->count - 1);
|
|
|
|
/*
|
|
* Calculate the loop count based on the largest descriptor ring
|
|
* The idea is to wrap the largest ring a number of times using 64
|
|
* send/receive pairs during each loop
|
|
*/
|
|
|
|
if (rx_ring->count <= tx_ring->count)
|
|
lc = ((tx_ring->count / 64) * 2) + 1;
|
|
else
|
|
lc = ((rx_ring->count / 64) * 2) + 1;
|
|
|
|
k = 0;
|
|
l = 0;
|
|
for (j = 0; j <= lc; j++) { /* loop count loop */
|
|
for (i = 0; i < 64; i++) { /* send the packets */
|
|
e1000_create_lbtest_frame(tx_ring->buffer_info[k].skb,
|
|
1024);
|
|
pci_dma_sync_single_for_device(pdev,
|
|
tx_ring->buffer_info[k].dma,
|
|
tx_ring->buffer_info[k].length,
|
|
PCI_DMA_TODEVICE);
|
|
k++;
|
|
if (k == tx_ring->count)
|
|
k = 0;
|
|
}
|
|
ew32(TDT, k);
|
|
msleep(200);
|
|
time = jiffies; /* set the start time for the receive */
|
|
good_cnt = 0;
|
|
do { /* receive the sent packets */
|
|
pci_dma_sync_single_for_cpu(pdev,
|
|
rx_ring->buffer_info[l].dma, 2048,
|
|
PCI_DMA_FROMDEVICE);
|
|
|
|
ret_val = e1000_check_lbtest_frame(
|
|
rx_ring->buffer_info[l].skb, 1024);
|
|
if (!ret_val)
|
|
good_cnt++;
|
|
l++;
|
|
if (l == rx_ring->count)
|
|
l = 0;
|
|
/*
|
|
* time + 20 msecs (200 msecs on 2.4) is more than
|
|
* enough time to complete the receives, if it's
|
|
* exceeded, break and error off
|
|
*/
|
|
} while ((good_cnt < 64) && !time_after(jiffies, time + 20));
|
|
if (good_cnt != 64) {
|
|
ret_val = 13; /* ret_val is the same as mis-compare */
|
|
break;
|
|
}
|
|
if (jiffies >= (time + 20)) {
|
|
ret_val = 14; /* error code for time out error */
|
|
break;
|
|
}
|
|
} /* end loop count loop */
|
|
return ret_val;
|
|
}
|
|
|
|
static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
|
|
{
|
|
/*
|
|
* PHY loopback cannot be performed if SoL/IDER
|
|
* sessions are active
|
|
*/
|
|
if (e1000_check_reset_block(&adapter->hw)) {
|
|
e_err("Cannot do PHY loopback test when SoL/IDER is active.\n");
|
|
*data = 0;
|
|
goto out;
|
|
}
|
|
|
|
*data = e1000_setup_desc_rings(adapter);
|
|
if (*data)
|
|
goto out;
|
|
|
|
*data = e1000_setup_loopback_test(adapter);
|
|
if (*data)
|
|
goto err_loopback;
|
|
|
|
*data = e1000_run_loopback_test(adapter);
|
|
e1000_loopback_cleanup(adapter);
|
|
|
|
err_loopback:
|
|
e1000_free_desc_rings(adapter);
|
|
out:
|
|
return *data;
|
|
}
|
|
|
|
static int e1000_link_test(struct e1000_adapter *adapter, u64 *data)
|
|
{
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
|
|
*data = 0;
|
|
if (hw->phy.media_type == e1000_media_type_internal_serdes) {
|
|
int i = 0;
|
|
hw->mac.serdes_has_link = 0;
|
|
|
|
/*
|
|
* On some blade server designs, link establishment
|
|
* could take as long as 2-3 minutes
|
|
*/
|
|
do {
|
|
hw->mac.ops.check_for_link(hw);
|
|
if (hw->mac.serdes_has_link)
|
|
return *data;
|
|
msleep(20);
|
|
} while (i++ < 3750);
|
|
|
|
*data = 1;
|
|
} else {
|
|
hw->mac.ops.check_for_link(hw);
|
|
if (hw->mac.autoneg)
|
|
msleep(4000);
|
|
|
|
if (!(er32(STATUS) &
|
|
E1000_STATUS_LU))
|
|
*data = 1;
|
|
}
|
|
return *data;
|
|
}
|
|
|
|
static int e1000e_get_sset_count(struct net_device *netdev, int sset)
|
|
{
|
|
switch (sset) {
|
|
case ETH_SS_TEST:
|
|
return E1000_TEST_LEN;
|
|
case ETH_SS_STATS:
|
|
return E1000_STATS_LEN;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static void e1000_diag_test(struct net_device *netdev,
|
|
struct ethtool_test *eth_test, u64 *data)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
u16 autoneg_advertised;
|
|
u8 forced_speed_duplex;
|
|
u8 autoneg;
|
|
bool if_running = netif_running(netdev);
|
|
|
|
set_bit(__E1000_TESTING, &adapter->state);
|
|
if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
|
|
/* Offline tests */
|
|
|
|
/* save speed, duplex, autoneg settings */
|
|
autoneg_advertised = adapter->hw.phy.autoneg_advertised;
|
|
forced_speed_duplex = adapter->hw.mac.forced_speed_duplex;
|
|
autoneg = adapter->hw.mac.autoneg;
|
|
|
|
e_info("offline testing starting\n");
|
|
|
|
/*
|
|
* Link test performed before hardware reset so autoneg doesn't
|
|
* interfere with test result
|
|
*/
|
|
if (e1000_link_test(adapter, &data[4]))
|
|
eth_test->flags |= ETH_TEST_FL_FAILED;
|
|
|
|
if (if_running)
|
|
/* indicate we're in test mode */
|
|
dev_close(netdev);
|
|
else
|
|
e1000e_reset(adapter);
|
|
|
|
if (e1000_reg_test(adapter, &data[0]))
|
|
eth_test->flags |= ETH_TEST_FL_FAILED;
|
|
|
|
e1000e_reset(adapter);
|
|
if (e1000_eeprom_test(adapter, &data[1]))
|
|
eth_test->flags |= ETH_TEST_FL_FAILED;
|
|
|
|
e1000e_reset(adapter);
|
|
if (e1000_intr_test(adapter, &data[2]))
|
|
eth_test->flags |= ETH_TEST_FL_FAILED;
|
|
|
|
e1000e_reset(adapter);
|
|
/* make sure the phy is powered up */
|
|
e1000e_power_up_phy(adapter);
|
|
if (e1000_loopback_test(adapter, &data[3]))
|
|
eth_test->flags |= ETH_TEST_FL_FAILED;
|
|
|
|
/* restore speed, duplex, autoneg settings */
|
|
adapter->hw.phy.autoneg_advertised = autoneg_advertised;
|
|
adapter->hw.mac.forced_speed_duplex = forced_speed_duplex;
|
|
adapter->hw.mac.autoneg = autoneg;
|
|
|
|
/* force this routine to wait until autoneg complete/timeout */
|
|
adapter->hw.phy.autoneg_wait_to_complete = 1;
|
|
e1000e_reset(adapter);
|
|
adapter->hw.phy.autoneg_wait_to_complete = 0;
|
|
|
|
clear_bit(__E1000_TESTING, &adapter->state);
|
|
if (if_running)
|
|
dev_open(netdev);
|
|
} else {
|
|
e_info("online testing starting\n");
|
|
/* Online tests */
|
|
if (e1000_link_test(adapter, &data[4]))
|
|
eth_test->flags |= ETH_TEST_FL_FAILED;
|
|
|
|
/* Online tests aren't run; pass by default */
|
|
data[0] = 0;
|
|
data[1] = 0;
|
|
data[2] = 0;
|
|
data[3] = 0;
|
|
|
|
clear_bit(__E1000_TESTING, &adapter->state);
|
|
}
|
|
msleep_interruptible(4 * 1000);
|
|
}
|
|
|
|
static void e1000_get_wol(struct net_device *netdev,
|
|
struct ethtool_wolinfo *wol)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
|
|
wol->supported = 0;
|
|
wol->wolopts = 0;
|
|
|
|
if (!(adapter->flags & FLAG_HAS_WOL))
|
|
return;
|
|
|
|
wol->supported = WAKE_UCAST | WAKE_MCAST |
|
|
WAKE_BCAST | WAKE_MAGIC |
|
|
WAKE_PHY | WAKE_ARP;
|
|
|
|
/* apply any specific unsupported masks here */
|
|
if (adapter->flags & FLAG_NO_WAKE_UCAST) {
|
|
wol->supported &= ~WAKE_UCAST;
|
|
|
|
if (adapter->wol & E1000_WUFC_EX)
|
|
e_err("Interface does not support directed (unicast) "
|
|
"frame wake-up packets\n");
|
|
}
|
|
|
|
if (adapter->wol & E1000_WUFC_EX)
|
|
wol->wolopts |= WAKE_UCAST;
|
|
if (adapter->wol & E1000_WUFC_MC)
|
|
wol->wolopts |= WAKE_MCAST;
|
|
if (adapter->wol & E1000_WUFC_BC)
|
|
wol->wolopts |= WAKE_BCAST;
|
|
if (adapter->wol & E1000_WUFC_MAG)
|
|
wol->wolopts |= WAKE_MAGIC;
|
|
if (adapter->wol & E1000_WUFC_LNKC)
|
|
wol->wolopts |= WAKE_PHY;
|
|
if (adapter->wol & E1000_WUFC_ARP)
|
|
wol->wolopts |= WAKE_ARP;
|
|
}
|
|
|
|
static int e1000_set_wol(struct net_device *netdev,
|
|
struct ethtool_wolinfo *wol)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
|
|
if (wol->wolopts & WAKE_MAGICSECURE)
|
|
return -EOPNOTSUPP;
|
|
|
|
if (!(adapter->flags & FLAG_HAS_WOL))
|
|
return wol->wolopts ? -EOPNOTSUPP : 0;
|
|
|
|
/* these settings will always override what we currently have */
|
|
adapter->wol = 0;
|
|
|
|
if (wol->wolopts & WAKE_UCAST)
|
|
adapter->wol |= E1000_WUFC_EX;
|
|
if (wol->wolopts & WAKE_MCAST)
|
|
adapter->wol |= E1000_WUFC_MC;
|
|
if (wol->wolopts & WAKE_BCAST)
|
|
adapter->wol |= E1000_WUFC_BC;
|
|
if (wol->wolopts & WAKE_MAGIC)
|
|
adapter->wol |= E1000_WUFC_MAG;
|
|
if (wol->wolopts & WAKE_PHY)
|
|
adapter->wol |= E1000_WUFC_LNKC;
|
|
if (wol->wolopts & WAKE_ARP)
|
|
adapter->wol |= E1000_WUFC_ARP;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* toggle LED 4 times per second = 2 "blinks" per second */
|
|
#define E1000_ID_INTERVAL (HZ/4)
|
|
|
|
/* bit defines for adapter->led_status */
|
|
#define E1000_LED_ON 0
|
|
|
|
static void e1000_led_blink_callback(unsigned long data)
|
|
{
|
|
struct e1000_adapter *adapter = (struct e1000_adapter *) data;
|
|
|
|
if (test_and_change_bit(E1000_LED_ON, &adapter->led_status))
|
|
adapter->hw.mac.ops.led_off(&adapter->hw);
|
|
else
|
|
adapter->hw.mac.ops.led_on(&adapter->hw);
|
|
|
|
mod_timer(&adapter->blink_timer, jiffies + E1000_ID_INTERVAL);
|
|
}
|
|
|
|
static int e1000_phys_id(struct net_device *netdev, u32 data)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
|
|
if (!data)
|
|
data = INT_MAX;
|
|
|
|
if ((hw->phy.type == e1000_phy_ife) ||
|
|
(hw->mac.type == e1000_82574)) {
|
|
if (!adapter->blink_timer.function) {
|
|
init_timer(&adapter->blink_timer);
|
|
adapter->blink_timer.function =
|
|
e1000_led_blink_callback;
|
|
adapter->blink_timer.data = (unsigned long) adapter;
|
|
}
|
|
mod_timer(&adapter->blink_timer, jiffies);
|
|
msleep_interruptible(data * 1000);
|
|
del_timer_sync(&adapter->blink_timer);
|
|
if (hw->phy.type == e1000_phy_ife)
|
|
e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0);
|
|
} else {
|
|
e1000e_blink_led(hw);
|
|
msleep_interruptible(data * 1000);
|
|
}
|
|
|
|
hw->mac.ops.led_off(hw);
|
|
clear_bit(E1000_LED_ON, &adapter->led_status);
|
|
hw->mac.ops.cleanup_led(hw);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int e1000_get_coalesce(struct net_device *netdev,
|
|
struct ethtool_coalesce *ec)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
|
|
if (adapter->itr_setting <= 3)
|
|
ec->rx_coalesce_usecs = adapter->itr_setting;
|
|
else
|
|
ec->rx_coalesce_usecs = 1000000 / adapter->itr_setting;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int e1000_set_coalesce(struct net_device *netdev,
|
|
struct ethtool_coalesce *ec)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
|
|
if ((ec->rx_coalesce_usecs > E1000_MAX_ITR_USECS) ||
|
|
((ec->rx_coalesce_usecs > 3) &&
|
|
(ec->rx_coalesce_usecs < E1000_MIN_ITR_USECS)) ||
|
|
(ec->rx_coalesce_usecs == 2))
|
|
return -EINVAL;
|
|
|
|
if (ec->rx_coalesce_usecs <= 3) {
|
|
adapter->itr = 20000;
|
|
adapter->itr_setting = ec->rx_coalesce_usecs;
|
|
} else {
|
|
adapter->itr = (1000000 / ec->rx_coalesce_usecs);
|
|
adapter->itr_setting = adapter->itr & ~3;
|
|
}
|
|
|
|
if (adapter->itr_setting != 0)
|
|
ew32(ITR, 1000000000 / (adapter->itr * 256));
|
|
else
|
|
ew32(ITR, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int e1000_nway_reset(struct net_device *netdev)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
if (netif_running(netdev))
|
|
e1000e_reinit_locked(adapter);
|
|
return 0;
|
|
}
|
|
|
|
static void e1000_get_ethtool_stats(struct net_device *netdev,
|
|
struct ethtool_stats *stats,
|
|
u64 *data)
|
|
{
|
|
struct e1000_adapter *adapter = netdev_priv(netdev);
|
|
int i;
|
|
|
|
e1000e_update_stats(adapter);
|
|
for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
|
|
char *p = (char *)adapter+e1000_gstrings_stats[i].stat_offset;
|
|
data[i] = (e1000_gstrings_stats[i].sizeof_stat ==
|
|
sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
|
|
}
|
|
}
|
|
|
|
static void e1000_get_strings(struct net_device *netdev, u32 stringset,
|
|
u8 *data)
|
|
{
|
|
u8 *p = data;
|
|
int i;
|
|
|
|
switch (stringset) {
|
|
case ETH_SS_TEST:
|
|
memcpy(data, *e1000_gstrings_test, sizeof(e1000_gstrings_test));
|
|
break;
|
|
case ETH_SS_STATS:
|
|
for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
|
|
memcpy(p, e1000_gstrings_stats[i].stat_string,
|
|
ETH_GSTRING_LEN);
|
|
p += ETH_GSTRING_LEN;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
static const struct ethtool_ops e1000_ethtool_ops = {
|
|
.get_settings = e1000_get_settings,
|
|
.set_settings = e1000_set_settings,
|
|
.get_drvinfo = e1000_get_drvinfo,
|
|
.get_regs_len = e1000_get_regs_len,
|
|
.get_regs = e1000_get_regs,
|
|
.get_wol = e1000_get_wol,
|
|
.set_wol = e1000_set_wol,
|
|
.get_msglevel = e1000_get_msglevel,
|
|
.set_msglevel = e1000_set_msglevel,
|
|
.nway_reset = e1000_nway_reset,
|
|
.get_link = e1000_get_link,
|
|
.get_eeprom_len = e1000_get_eeprom_len,
|
|
.get_eeprom = e1000_get_eeprom,
|
|
.set_eeprom = e1000_set_eeprom,
|
|
.get_ringparam = e1000_get_ringparam,
|
|
.set_ringparam = e1000_set_ringparam,
|
|
.get_pauseparam = e1000_get_pauseparam,
|
|
.set_pauseparam = e1000_set_pauseparam,
|
|
.get_rx_csum = e1000_get_rx_csum,
|
|
.set_rx_csum = e1000_set_rx_csum,
|
|
.get_tx_csum = e1000_get_tx_csum,
|
|
.set_tx_csum = e1000_set_tx_csum,
|
|
.get_sg = ethtool_op_get_sg,
|
|
.set_sg = ethtool_op_set_sg,
|
|
.get_tso = ethtool_op_get_tso,
|
|
.set_tso = e1000_set_tso,
|
|
.self_test = e1000_diag_test,
|
|
.get_strings = e1000_get_strings,
|
|
.phys_id = e1000_phys_id,
|
|
.get_ethtool_stats = e1000_get_ethtool_stats,
|
|
.get_sset_count = e1000e_get_sset_count,
|
|
.get_coalesce = e1000_get_coalesce,
|
|
.set_coalesce = e1000_set_coalesce,
|
|
};
|
|
|
|
void e1000e_set_ethtool_ops(struct net_device *netdev)
|
|
{
|
|
SET_ETHTOOL_OPS(netdev, &e1000_ethtool_ops);
|
|
}
|