linux/arch/arm/boot/dts/s5pv210-torbreck.dts
Javier Martinez Canillas 5271d00270 ARM: dts: s5p: Add missing unit name to memory nodes for S5PV210 boards
This patch fixes the following DTC warnings:

"Node /memory has a reg or ranges property, but no unit name"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-09-16 09:17:00 +02:00

93 lines
1.8 KiB
Plaintext

/*
* Samsung's S5PV210 SoC device tree source
*
* Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
*
* Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
* Tomasz Figa <t.figa@samsung.com>
*
* Board device tree source for Torbreck board.
*
* NOTE: This file is completely based on original board file for mach-torbreck
* available in Linux 3.15 and intends to provide equivalent level of hardware
* support. Due to lack of hardware, _no_ testing has been performed.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include "s5pv210.dtsi"
/ {
model = "aESOP Torbreck based on S5PV210";
compatible = "aesop,torbreck", "samsung,s5pv210";
chosen {
bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
};
memory@20000000 {
device_type = "memory";
reg = <0x20000000 0x20000000>;
};
};
&xusbxti {
clock-frequency = <24000000>;
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};
&uart2 {
status = "okay";
};
&uart3 {
status = "okay";
};
&rtc {
status = "okay";
};
&sdhci0 {
bus-width = <4>;
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>;
pinctrl-names = "default";
status = "okay";
};
&sdhci1 {
bus-width = <4>;
pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus1 &sd1_bus4>;
pinctrl-names = "default";
status = "okay";
};
&sdhci2 {
bus-width = <4>;
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
pinctrl-names = "default";
status = "okay";
};
&sdhci3 {
bus-width = <4>;
pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_cd &sd3_bus1 &sd3_bus4>;
pinctrl-names = "default";
status = "okay";
};
&i2s0 {
status = "okay";
};