linux/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
Srinivas Kandagatla c351c254ac ARM: dts: apq8064: move sdcc3 pinctrls out of baord file
This patch move sdcc3 pinctrl nodes out of board file, so that
other boards do not duplicate the same thing.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-27 17:36:51 -05:00

395 lines
7.6 KiB
Plaintext

#include "qcom-apq8064-v2.0.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/mfd/qcom-rpm.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
model = "Sony Xperia Z";
compatible = "sony,xperia-yuga", "qcom,apq8064";
aliases {
serial0 = &gsbi5_serial;
};
chosen {
stdout-path = "serial0:115200n8";
};
gpio-keys {
compatible = "gpio-keys";
input-name = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pin_a>;
camera-focus {
label = "camera_focus";
gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA_FOCUS>;
};
camera-snapshot {
label = "camera_snapshot";
gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA>;
};
volume-down {
label = "volume_down";
gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEDOWN>;
};
volume-up {
label = "volume_up";
gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEUP>;
};
};
soc {
pinctrl@800000 {
gsbi5_uart_pin_a: gsbi5-uart-pin-active {
rx {
pins = "gpio52";
function = "gsbi5";
drive-strength = <2>;
bias-pull-up;
};
tx {
pins = "gpio51";
function = "gsbi5";
drive-strength = <4>;
bias-disable;
};
};
sdcc3_cd_pin_a: sdcc3-cd-pin-active {
pins = "gpio26";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
};
rpm@108000 {
regulators {
vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
vin_lvs_1_3_6-supply = <&pm8921_s4>;
vin_lvs_4_5_7-supply = <&pm8921_s4>;
vin_ncp-supply = <&pm8921_l6>;
vin_lvs2-supply = <&pm8921_s4>;
vin_l24-supply = <&pm8921_s1>;
vin_l25-supply = <&pm8921_s1>;
vin_l27-supply = <&pm8921_s7>;
vin_l28-supply = <&pm8921_s7>;
/* Buck SMPS */
s1 {
regulator-always-on;
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
qcom,switch-mode-frequency = <3200000>;
bias-pull-down;
};
s2 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
};
s3 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1150000>;
qcom,switch-mode-frequency = <4800000>;
bias-pull-down;
};
s4 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
};
s7 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <3200000>;
};
s8 {
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
qcom,switch-mode-frequency = <1600000>;
};
/* PMOS LDO */
l1 {
regulator-always-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
bias-pull-down;
};
l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
l3 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
bias-pull-down;
};
l4 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
l5 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
l6 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
l7 {
regulator-min-microvolt = <1850000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
l8 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
bias-pull-down;
};
l9 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
l10 {
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
bias-pull-down;
};
l11 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
l12 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
l14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
l15 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
l16 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
bias-pull-down;
};
l17 {
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
bias-pull-down;
};
l18 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
bias-pull-down;
};
l21 {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
bias-pull-down;
};
l22 {
regulator-min-microvolt = <2600000>;
regulator-max-microvolt = <2600000>;
bias-pull-down;
};
l23 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
l24 {
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1150000>;
bias-pull-down;
};
l25 {
regulator-always-on;
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <1250000>;
bias-pull-down;
};
l27 {
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
};
l28 {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
bias-pull-down;
};
l29 {
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
bias-pull-down;
};
/* Low Voltage Switch */
lvs1 {
bias-pull-down;
};
lvs2 {
bias-pull-down;
};
lvs3 {
bias-pull-down;
};
lvs4 {
bias-pull-down;
};
lvs5 {
bias-pull-down;
};
lvs6 {
bias-pull-down;
};
lvs7 {
bias-pull-down;
};
usb-switch {};
hdmi-switch {};
ncp {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <1600000>;
};
};
};
qcom,ssbi@500000 {
pmic@0 {
gpio@150 {
gpio_keys_pin_a: gpio-keys-pin-active {
pins = "gpio3", "gpio4", "gpio29", "gpio35";
function = "normal";
bias-pull-up;
drive-push-pull;
input-enable;
power-source = <2>;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
qcom,pull-up-strength = <0>;
};
};
};
};
phy@12500000 {
status = "okay";
vddcx-supply = <&pm8921_s3>;
v3p3-supply = <&pm8921_l3>;
v1p8-supply = <&pm8921_l4>;
};
gadget@12500000 {
status = "okay";
};
gsbi@1a200000 {
status = "ok";
qcom,mode = <GSBI_PROT_I2C_UART>;
serial@1a240000 {
status = "ok";
pinctrl-names = "default";
pinctrl-0 = <&gsbi5_uart_pin_a>;
};
};
amba {
sdcc1: sdcc@12400000 {
status = "okay";
vmmc-supply = <&pm8921_l5>;
vqmmc-supply = <&pm8921_s4>;
};
sdcc3: sdcc@12180000 {
status = "okay";
vmmc-supply = <&pm8921_l6>;
cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>;
};
};
};
};