linux/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts
Roger Shimizu 60ff189ca0 ARM: dts: kirkwood: split lswvl dts to linkstation lsvl and lswvl
LS-WVL/VL are both kirkwood-6282 based NAS devices, which share
many MPP pins. However they are slightly different:
  - LS-WVL is 2-Bay NAS, and LS-VL is only 1-Bay.
  - There're two red LED indicator on LS-WVL to show when HDD fails,
    which is similar to LS-WXL, but there's no such on LS-VL.

So after the split, common part goes into .dtsi file:
  - kirkwood-linkstation-6282.dtsi
while all rest part goes into device specific .dts file:
  - kirkwood-linkstation-lsvl.dts
  - kirkwood-linkstation-lswvl.dts

Signed-off-by: Roger Shimizu <rogershimizu@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-02-09 11:00:24 +01:00

113 lines
3.4 KiB
Plaintext

/*
* Device Tree file for Buffalo Linkstation LS-WVL
*
* Copyright (C) 2015, 2016
* Roger Shimizu <rogershimizu@gmail.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "kirkwood-linkstation-6282.dtsi"
/ {
model = "Buffalo Linkstation LS-WVL";
compatible = "buffalo,lswvl","marvell,kirkwood-88f6282", "marvell,kirkwood";
memory { /* 256 MB */
device_type = "memory";
reg = <0x00000000 0x10000000>;
};
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pmx_power_hdd1: pmx-power-hdd1 {
marvell,pins = "mpp9";
marvell,function = "gpio";
};
pmx_led_hdderr0: pmx-led-hdderr0 {
marvell,pins = "mpp34";
marvell,function = "gpio";
};
pmx_led_hdderr1: pmx-led-hdderr1 {
marvell,pins = "mpp35";
marvell,function = "gpio";
};
};
sata@80000 {
nr-ports = <2>;
};
};
gpio_leds {
pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
&pmx_led_info &pmx_led_power
&pmx_led_function_blue
&pmx_led_hdderr0
&pmx_led_hdderr1>;
red-hdderr0-led {
label = "linkstation:red:hdderr0";
gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
};
red-hdderr1-led {
label = "linkstation:red:hdderr1";
gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
};
};
regulators {
pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
hdd_power1: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "HDD1 Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
};
};
};