forked from Minki/linux
2e7c416cba
As of commit 1006ed7e1b
("serial: imx: Use generic uart-has-rtscts
DT property"), the Freescale IMX UART driver recognizes the generic
"uart-has-rtscts" DT property, deprecating the vendor-specific
"fsl,uart-has-rtscts" DT property. Hence replace the latter by the
former in all DTS files.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
234 lines
6.8 KiB
Plaintext
234 lines
6.8 KiB
Plaintext
/*
|
|
* Copyright 2014, 2015 O.S. Systems Software LTDA.
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public
|
|
* License along with this file; if not, write to the Free
|
|
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
|
|
* MA 02110-1301 USA
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include "imx6sl.dtsi"
|
|
|
|
/ {
|
|
model = "WaRP Board";
|
|
compatible = "warp,imx6sl-warp", "fsl,imx6sl";
|
|
|
|
memory {
|
|
reg = <0x80000000 0x20000000>;
|
|
};
|
|
|
|
usdhc3_pwrseq: usdhc3_pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>, /* WL_REG_ON */
|
|
<&gpio4 7 GPIO_ACTIVE_LOW>, /* WL_HOSTWAKE */
|
|
<&gpio3 25 GPIO_ACTIVE_LOW>, /* BT_REG_ON */
|
|
<&gpio3 27 GPIO_ACTIVE_LOW>, /* BT_HOSTWAKE */
|
|
<&gpio4 4 GPIO_ACTIVE_LOW>, /* BT_WAKE */
|
|
<&gpio4 6 GPIO_ACTIVE_LOW>; /* BT_RST_N */
|
|
};
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart5 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart5>;
|
|
uart-has-rtscts;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg1 {
|
|
dr_mode = "peripheral";
|
|
disable-over-current;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg2 {
|
|
dr_mode = "host";
|
|
disable-over-current;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc2 {
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc2>;
|
|
pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
|
|
pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
|
|
bus-width = <8>;
|
|
non-removable;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc3 {
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc3>;
|
|
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
|
|
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
|
|
bus-width = <4>;
|
|
non-removable;
|
|
keep-power-in-suspend;
|
|
wakeup-source;
|
|
mmc-pwrseq = <&usdhc3_pwrseq>;
|
|
status = "okay";
|
|
};
|
|
|
|
&iomuxc {
|
|
imx6sl-warp {
|
|
pinctrl_uart1: uart1grp {
|
|
fsl,pins = <
|
|
MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x41b0b1
|
|
MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x41b0b1
|
|
>;
|
|
};
|
|
|
|
|
|
pinctrl_uart3: uart3grp {
|
|
fsl,pins = <
|
|
MX6SL_PAD_AUD_RXC__UART3_RX_DATA 0x41b0b1
|
|
MX6SL_PAD_AUD_RXC__UART3_TX_DATA 0x41b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart5: uart5grp {
|
|
fsl,pins = <
|
|
MX6SL_PAD_ECSPI1_SCLK__UART5_RX_DATA 0x41b0b1
|
|
MX6SL_PAD_ECSPI1_MOSI__UART5_TX_DATA 0x41b0b1
|
|
MX6SL_PAD_ECSPI1_MISO__UART5_RTS_B 0x4130b1
|
|
MX6SL_PAD_ECSPI1_SS0__UART5_CTS_B 0x4130b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2: usdhc2grp {
|
|
fsl,pins = <
|
|
MX6SL_PAD_SD2_CMD__SD2_CMD 0x417059
|
|
MX6SL_PAD_SD2_CLK__SD2_CLK 0x410059
|
|
MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x417059
|
|
MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x417059
|
|
MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x417059
|
|
MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x417059
|
|
MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x417059
|
|
MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x417059
|
|
MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x417059
|
|
MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x417059
|
|
MX6SL_PAD_SD2_RST__SD2_RESET 0x417059
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
|
|
fsl,pins = <
|
|
MX6SL_PAD_SD2_CMD__SD2_CMD 0x4170b9
|
|
MX6SL_PAD_SD2_CLK__SD2_CLK 0x4100b9
|
|
MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x4170b9
|
|
MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x4170b9
|
|
MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x4170b9
|
|
MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x4170b9
|
|
MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x4170b9
|
|
MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x4170b9
|
|
MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x4170b9
|
|
MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x4170b9
|
|
MX6SL_PAD_SD2_RST__SD2_RESET 0x4170b9
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
|
|
fsl,pins = <
|
|
MX6SL_PAD_SD2_CMD__SD2_CMD 0x4170f9
|
|
MX6SL_PAD_SD2_CLK__SD2_CLK 0x4100f9
|
|
MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x4170f9
|
|
MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x4170f9
|
|
MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x4170f9
|
|
MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x4170f9
|
|
MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x4170f9
|
|
MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x4170f9
|
|
MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x4170f9
|
|
MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x4170f9
|
|
MX6SL_PAD_SD2_RST__SD2_RESET 0x4170f9
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3: usdhc3grp {
|
|
fsl,pins = <
|
|
MX6SL_PAD_SD3_CMD__SD3_CMD 0x417059
|
|
MX6SL_PAD_SD3_CLK__SD3_CLK 0x410059
|
|
MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x417059
|
|
MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x417059
|
|
MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x417059
|
|
MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x417059
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
|
|
fsl,pins = <
|
|
MX6SL_PAD_SD3_CMD__SD3_CMD 0x4170b9
|
|
MX6SL_PAD_SD3_CLK__SD3_CLK 0x4100b9
|
|
MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x4170b9
|
|
MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x4170b9
|
|
MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x4170b9
|
|
MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x4170b9
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
|
|
fsl,pins = <
|
|
MX6SL_PAD_SD3_CMD__SD3_CMD 0x4170f9
|
|
MX6SL_PAD_SD3_CLK__SD3_CLK 0x4100f9
|
|
MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x4170f9
|
|
MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x4170f9
|
|
MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x4170f9
|
|
MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x4170f9
|
|
>;
|
|
};
|
|
};
|
|
};
|