leandrof/linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
057d32f03d
linux/drivers/clk/ti/dpll.c
Nishanth Menon b4be018921 CLK: TI: dpll: support OMAP5 MPU DPLL that need special handling for higher frequencies 
MPU DPLL on OMAP5, DRA75x, DRA72x has a limitation on the maximum
frequency it can be locked at. Duty Cycle Correction circuit is used
to recover a correct duty cycle for achieving higher frequencies
(hardware internally switches output to M3 output(CLKOUTHIF) from M2
output (CLKOUT)).

So provide support to setup required data to handle Duty cycle by
the setting up the minimum frequency for DPLL. 1.4GHz is common
for all these devices and is based on Technical Reference Manual
information for OMAP5432((SWPU282U) chapter 3.6.3.3.1 "DPLLs Output
Clocks Parameters", and equivalent information from DRA75x, DRA72x
documentation(SPRUHP2E, SPRUHI2P).

Signed-off-by: Nishanth Menon <nm@ti.com>
[t-kristo@ti.com: updated for latest dpll init API call]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-06-06 20:33:39 +03:00

627 lines
17 KiB
C
Raw Blame History

/*
* OMAP DPLL clock support
*
* Copyright (C) 2013 Texas Instruments, Inc.
*
* Tero Kristo <t-kristo@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/clk-provider.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/clk/ti.h>
#undef pr_fmt
#define pr_fmt(fmt) "%s: " fmt, __func__
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
defined(CONFIG_SOC_DRA7XX)
static const struct clk_ops dpll_m4xen_ck_ops = {
.enable = &omap3_noncore_dpll_enable,
.disable = &omap3_noncore_dpll_disable,
.recalc_rate = &omap4_dpll_regm4xen_recalc,
.round_rate = &omap4_dpll_regm4xen_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
.get_parent = &omap2_init_dpll_parent,
};
#else
static const struct clk_ops dpll_m4xen_ck_ops = {};
#endif
#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) || \
defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX) || \
defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
static const struct clk_ops dpll_core_ck_ops = {
.recalc_rate = &omap3_dpll_recalc,
.get_parent = &omap2_init_dpll_parent,
};
static const struct clk_ops dpll_ck_ops = {
.enable = &omap3_noncore_dpll_enable,
.disable = &omap3_noncore_dpll_disable,
.recalc_rate = &omap3_dpll_recalc,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
.get_parent = &omap2_init_dpll_parent,
};
static const struct clk_ops dpll_no_gate_ck_ops = {
.recalc_rate = &omap3_dpll_recalc,
.get_parent = &omap2_init_dpll_parent,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
};
#else
static const struct clk_ops dpll_core_ck_ops = {};
static const struct clk_ops dpll_ck_ops = {};
static const struct clk_ops dpll_no_gate_ck_ops = {};
const struct clk_hw_omap_ops clkhwops_omap3_dpll = {};
#endif
#ifdef CONFIG_ARCH_OMAP2
static const struct clk_ops omap2_dpll_core_ck_ops = {
.get_parent = &omap2_init_dpll_parent,
.recalc_rate = &omap2_dpllcore_recalc,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap2_reprogram_dpllcore,
};
#else
static const struct clk_ops omap2_dpll_core_ck_ops = {};
#endif
#ifdef CONFIG_ARCH_OMAP3
static const struct clk_ops omap3_dpll_core_ck_ops = {
.get_parent = &omap2_init_dpll_parent,
.recalc_rate = &omap3_dpll_recalc,
.round_rate = &omap2_dpll_round_rate,
};
#else
static const struct clk_ops omap3_dpll_core_ck_ops = {};
#endif
#ifdef CONFIG_ARCH_OMAP3
static const struct clk_ops omap3_dpll_ck_ops = {
.enable = &omap3_noncore_dpll_enable,
.disable = &omap3_noncore_dpll_disable,
.get_parent = &omap2_init_dpll_parent,
.recalc_rate = &omap3_dpll_recalc,
.set_rate = &omap3_noncore_dpll_set_rate,
.round_rate = &omap2_dpll_round_rate,
};
static const struct clk_ops omap3_dpll_per_ck_ops = {
.enable = &omap3_noncore_dpll_enable,
.disable = &omap3_noncore_dpll_disable,
.get_parent = &omap2_init_dpll_parent,
.recalc_rate = &omap3_dpll_recalc,
.set_rate = &omap3_dpll4_set_rate,
.round_rate = &omap2_dpll_round_rate,
};
#endif
static const struct clk_ops dpll_x2_ck_ops = {
.recalc_rate = &omap3_clkoutx2_recalc,
};
/**
* ti_clk_register_dpll - low level registration of a DPLL clock
* @hw: hardware clock definition for the clock
* @node: device node for the clock
*
* Finalizes DPLL registration process. In case a failure (clk-ref or
* clk-bypass is missing), the clock is added to retry list and
* the initialization is retried on later stage.
*/
static void __init ti_clk_register_dpll(struct clk_hw *hw,
struct device_node *node)
{
struct clk_hw_omap *clk_hw = to_clk_hw_omap(hw);
struct dpll_data *dd = clk_hw->dpll_data;
struct clk *clk;
dd->clk_ref = of_clk_get(node, 0);
dd->clk_bypass = of_clk_get(node, 1);
if (IS_ERR(dd->clk_ref) || IS_ERR(dd->clk_bypass)) {
pr_debug("clk-ref or clk-bypass missing for %s, retry later\n",
node->name);
if (!ti_clk_retry_init(node, hw, ti_clk_register_dpll))
return;
goto cleanup;
}
/* register the clock */
clk = clk_register(NULL, &clk_hw->hw);
if (!IS_ERR(clk)) {
omap2_init_clk_hw_omap_clocks(clk);
of_clk_add_provider(node, of_clk_src_simple_get, clk);
kfree(clk_hw->hw.init->parent_names);
kfree(clk_hw->hw.init);
return;
}
cleanup:
kfree(clk_hw->dpll_data);
kfree(clk_hw->hw.init->parent_names);
kfree(clk_hw->hw.init);
kfree(clk_hw);
}
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM33XX)
/**
* ti_clk_register_dpll_x2 - Registers a DPLLx2 clock
* @node: device node for this clock
* @ops: clk_ops for this clock
* @hw_ops: clk_hw_ops for this clock
*
* Initializes a DPLL x 2 clock from device tree data.
*/
static void ti_clk_register_dpll_x2(struct device_node *node,
const struct clk_ops *ops,
const struct clk_hw_omap_ops *hw_ops)
{
struct clk *clk;
struct clk_init_data init = { NULL };
struct clk_hw_omap *clk_hw;
const char *name = node->name;
const char *parent_name;
parent_name = of_clk_get_parent_name(node, 0);
if (!parent_name) {
pr_err("%s must have parent\n", node->name);
return;
}
clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
if (!clk_hw)
return;
clk_hw->ops = hw_ops;
clk_hw->hw.init = &init;
init.name = name;
init.ops = ops;
init.parent_names = &parent_name;
init.num_parents = 1;
/* register the clock */
clk = clk_register(NULL, &clk_hw->hw);
if (IS_ERR(clk)) {
kfree(clk_hw);
} else {
omap2_init_clk_hw_omap_clocks(clk);
of_clk_add_provider(node, of_clk_src_simple_get, clk);
}
}
#endif
/**
* of_ti_dpll_setup - Setup function for OMAP DPLL clocks
* @node: device node containing the DPLL info
* @ops: ops for the DPLL
* @ddt: DPLL data template to use
*
* Initializes a DPLL clock from device tree data.
*/
static void __init of_ti_dpll_setup(struct device_node *node,
const struct clk_ops *ops,
const struct dpll_data *ddt)
{
struct clk_hw_omap *clk_hw = NULL;
struct clk_init_data *init = NULL;
const char **parent_names = NULL;
struct dpll_data *dd = NULL;
int i;
u8 dpll_mode = 0;
dd = kzalloc(sizeof(*dd), GFP_KERNEL);
clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
init = kzalloc(sizeof(*init), GFP_KERNEL);
if (!dd || !clk_hw || !init)
goto cleanup;
memcpy(dd, ddt, sizeof(*dd));
clk_hw->dpll_data = dd;
clk_hw->ops = &clkhwops_omap3_dpll;
clk_hw->hw.init = init;
clk_hw->flags = MEMMAP_ADDRESSING;
init->name = node->name;
init->ops = ops;
init->num_parents = of_clk_get_parent_count(node);
if (init->num_parents < 1) {
pr_err("%s must have parent(s)\n", node->name);
goto cleanup;
}
parent_names = kzalloc(sizeof(char *) * init->num_parents, GFP_KERNEL);
if (!parent_names)
goto cleanup;
for (i = 0; i < init->num_parents; i++)
parent_names[i] = of_clk_get_parent_name(node, i);
init->parent_names = parent_names;
dd->control_reg = ti_clk_get_reg_addr(node, 0);
/*
* Special case for OMAP2 DPLL, register order is different due to
* missing idlest_reg, also clkhwops is different. Detected from
* missing idlest_mask.
*/
if (!dd->idlest_mask) {
dd->mult_div1_reg = ti_clk_get_reg_addr(node, 1);
#ifdef CONFIG_ARCH_OMAP2
clk_hw->ops = &clkhwops_omap2xxx_dpll;
omap2xxx_clkt_dpllcore_init(&clk_hw->hw);
#endif
} else {
dd->idlest_reg = ti_clk_get_reg_addr(node, 1);
if (!dd->idlest_reg)
goto cleanup;
dd->mult_div1_reg = ti_clk_get_reg_addr(node, 2);
}
if (!dd->control_reg || !dd->mult_div1_reg)
goto cleanup;
if (dd->autoidle_mask) {
dd->autoidle_reg = ti_clk_get_reg_addr(node, 3);
if (!dd->autoidle_reg)
goto cleanup;
}
if (of_property_read_bool(node, "ti,low-power-stop"))
dpll_mode |= 1 << DPLL_LOW_POWER_STOP;
if (of_property_read_bool(node, "ti,low-power-bypass"))
dpll_mode |= 1 << DPLL_LOW_POWER_BYPASS;
if (of_property_read_bool(node, "ti,lock"))
dpll_mode |= 1 << DPLL_LOCKED;
if (dpll_mode)
dd->modes = dpll_mode;
ti_clk_register_dpll(&clk_hw->hw, node);
return;
cleanup:
kfree(dd);
kfree(parent_names);
kfree(init);
kfree(clk_hw);
}
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
defined(CONFIG_SOC_DRA7XX)
static void __init of_ti_omap4_dpll_x2_setup(struct device_node *node)
{
ti_clk_register_dpll_x2(node, &dpll_x2_ck_ops, &clkhwops_omap4_dpllmx);
}
CLK_OF_DECLARE(ti_omap4_dpll_x2_clock, "ti,omap4-dpll-x2-clock",
of_ti_omap4_dpll_x2_setup);
#endif
#ifdef CONFIG_SOC_AM33XX
static void __init of_ti_am3_dpll_x2_setup(struct device_node *node)
{
ti_clk_register_dpll_x2(node, &dpll_x2_ck_ops, NULL);
}
CLK_OF_DECLARE(ti_am3_dpll_x2_clock, "ti,am3-dpll-x2-clock",
of_ti_am3_dpll_x2_setup);
#endif
#ifdef CONFIG_ARCH_OMAP3
static void __init of_ti_omap3_dpll_setup(struct device_node *node)
{
const struct dpll_data dd = {
.idlest_mask = 0x1,
.enable_mask = 0x7,
.autoidle_mask = 0x7,
.mult_mask = 0x7ff << 8,
.div1_mask = 0x7f,
.max_multiplier = 2047,
.max_divider = 128,
.min_divider = 1,
.freqsel_mask = 0xf0,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
};
of_ti_dpll_setup(node, &omap3_dpll_ck_ops, &dd);
}
CLK_OF_DECLARE(ti_omap3_dpll_clock, "ti,omap3-dpll-clock",
of_ti_omap3_dpll_setup);
static void __init of_ti_omap3_core_dpll_setup(struct device_node *node)
{
const struct dpll_data dd = {
.idlest_mask = 0x1,
.enable_mask = 0x7,
.autoidle_mask = 0x7,
.mult_mask = 0x7ff << 16,
.div1_mask = 0x7f << 8,
.max_multiplier = 2047,
.max_divider = 128,
.min_divider = 1,
.freqsel_mask = 0xf0,
};
of_ti_dpll_setup(node, &omap3_dpll_core_ck_ops, &dd);
}
CLK_OF_DECLARE(ti_omap3_core_dpll_clock, "ti,omap3-dpll-core-clock",
of_ti_omap3_core_dpll_setup);
static void __init of_ti_omap3_per_dpll_setup(struct device_node *node)
{
const struct dpll_data dd = {
.idlest_mask = 0x1 << 1,
.enable_mask = 0x7 << 16,
.autoidle_mask = 0x7 << 3,
.mult_mask = 0x7ff << 8,
.div1_mask = 0x7f,
.max_multiplier = 2047,
.max_divider = 128,
.min_divider = 1,
.freqsel_mask = 0xf00000,
.modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
};
of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd);
}
CLK_OF_DECLARE(ti_omap3_per_dpll_clock, "ti,omap3-dpll-per-clock",
of_ti_omap3_per_dpll_setup);
static void __init of_ti_omap3_per_jtype_dpll_setup(struct device_node *node)
{
const struct dpll_data dd = {
.idlest_mask = 0x1 << 1,
.enable_mask = 0x7 << 16,
.autoidle_mask = 0x7 << 3,
.mult_mask = 0xfff << 8,
.div1_mask = 0x7f,
.max_multiplier = 4095,
.max_divider = 128,
.min_divider = 1,
.sddiv_mask = 0xff << 24,
.dco_mask = 0xe << 20,
.flags = DPLL_J_TYPE,
.modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
};
of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd);
}
CLK_OF_DECLARE(ti_omap3_per_jtype_dpll_clock, "ti,omap3-dpll-per-j-type-clock",
of_ti_omap3_per_jtype_dpll_setup);
#endif
static void __init of_ti_omap4_dpll_setup(struct device_node *node)
{
const struct dpll_data dd = {
.idlest_mask = 0x1,
.enable_mask = 0x7,
.autoidle_mask = 0x7,
.mult_mask = 0x7ff << 8,
.div1_mask = 0x7f,
.max_multiplier = 2047,
.max_divider = 128,
.min_divider = 1,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
};
of_ti_dpll_setup(node, &dpll_ck_ops, &dd);
}
CLK_OF_DECLARE(ti_omap4_dpll_clock, "ti,omap4-dpll-clock",
of_ti_omap4_dpll_setup);
static void __init of_ti_omap5_mpu_dpll_setup(struct device_node *node)
{
const struct dpll_data dd = {
.idlest_mask = 0x1,
.enable_mask = 0x7,
.autoidle_mask = 0x7,
.mult_mask = 0x7ff << 8,
.div1_mask = 0x7f,
.max_multiplier = 2047,
.max_divider = 128,
.dcc_mask = BIT(22),
.dcc_rate = 1400000000, /* DCC beyond 1.4GHz */
.min_divider = 1,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
};
of_ti_dpll_setup(node, &dpll_ck_ops, &dd);
}
CLK_OF_DECLARE(of_ti_omap5_mpu_dpll_clock, "ti,omap5-mpu-dpll-clock",
of_ti_omap5_mpu_dpll_setup);
static void __init of_ti_omap4_core_dpll_setup(struct device_node *node)
{
const struct dpll_data dd = {
.idlest_mask = 0x1,
.enable_mask = 0x7,
.autoidle_mask = 0x7,
.mult_mask = 0x7ff << 8,
.div1_mask = 0x7f,
.max_multiplier = 2047,
.max_divider = 128,
.min_divider = 1,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
};
of_ti_dpll_setup(node, &dpll_core_ck_ops, &dd);
}
CLK_OF_DECLARE(ti_omap4_core_dpll_clock, "ti,omap4-dpll-core-clock",
of_ti_omap4_core_dpll_setup);
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
defined(CONFIG_SOC_DRA7XX)
static void __init of_ti_omap4_m4xen_dpll_setup(struct device_node *node)
{
const struct dpll_data dd = {
.idlest_mask = 0x1,
.enable_mask = 0x7,
.autoidle_mask = 0x7,
.mult_mask = 0x7ff << 8,
.div1_mask = 0x7f,
.max_multiplier = 2047,
.max_divider = 128,
.min_divider = 1,
.m4xen_mask = 0x800,
.lpmode_mask = 1 << 10,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
};
of_ti_dpll_setup(node, &dpll_m4xen_ck_ops, &dd);
}
CLK_OF_DECLARE(ti_omap4_m4xen_dpll_clock, "ti,omap4-dpll-m4xen-clock",
of_ti_omap4_m4xen_dpll_setup);
static void __init of_ti_omap4_jtype_dpll_setup(struct device_node *node)
{
const struct dpll_data dd = {
.idlest_mask = 0x1,
.enable_mask = 0x7,
.autoidle_mask = 0x7,
.mult_mask = 0xfff << 8,
.div1_mask = 0xff,
.max_multiplier = 4095,
.max_divider = 256,
.min_divider = 1,
.sddiv_mask = 0xff << 24,
.flags = DPLL_J_TYPE,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
};
of_ti_dpll_setup(node, &dpll_m4xen_ck_ops, &dd);
}
CLK_OF_DECLARE(ti_omap4_jtype_dpll_clock, "ti,omap4-dpll-j-type-clock",
of_ti_omap4_jtype_dpll_setup);
#endif
static void __init of_ti_am3_no_gate_dpll_setup(struct device_node *node)
{
const struct dpll_data dd = {
.idlest_mask = 0x1,
.enable_mask = 0x7,
.mult_mask = 0x7ff << 8,
.div1_mask = 0x7f,
.max_multiplier = 2047,
.max_divider = 128,
.min_divider = 1,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
};
of_ti_dpll_setup(node, &dpll_no_gate_ck_ops, &dd);
}
CLK_OF_DECLARE(ti_am3_no_gate_dpll_clock, "ti,am3-dpll-no-gate-clock",
of_ti_am3_no_gate_dpll_setup);
static void __init of_ti_am3_jtype_dpll_setup(struct device_node *node)
{
const struct dpll_data dd = {
.idlest_mask = 0x1,
.enable_mask = 0x7,
.mult_mask = 0x7ff << 8,
.div1_mask = 0x7f,
.max_multiplier = 4095,
.max_divider = 256,
.min_divider = 2,
.flags = DPLL_J_TYPE,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
};
of_ti_dpll_setup(node, &dpll_ck_ops, &dd);
}
CLK_OF_DECLARE(ti_am3_jtype_dpll_clock, "ti,am3-dpll-j-type-clock",
of_ti_am3_jtype_dpll_setup);
static void __init of_ti_am3_no_gate_jtype_dpll_setup(struct device_node *node)
{
const struct dpll_data dd = {
.idlest_mask = 0x1,
.enable_mask = 0x7,
.mult_mask = 0x7ff << 8,
.div1_mask = 0x7f,
.max_multiplier = 2047,
.max_divider = 128,
.min_divider = 1,
.flags = DPLL_J_TYPE,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
};
of_ti_dpll_setup(node, &dpll_no_gate_ck_ops, &dd);
}
CLK_OF_DECLARE(ti_am3_no_gate_jtype_dpll_clock,
"ti,am3-dpll-no-gate-j-type-clock",
of_ti_am3_no_gate_jtype_dpll_setup);
static void __init of_ti_am3_dpll_setup(struct device_node *node)
{
const struct dpll_data dd = {
.idlest_mask = 0x1,
.enable_mask = 0x7,
.mult_mask = 0x7ff << 8,
.div1_mask = 0x7f,
.max_multiplier = 2047,
.max_divider = 128,
.min_divider = 1,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
};
of_ti_dpll_setup(node, &dpll_ck_ops, &dd);
}
CLK_OF_DECLARE(ti_am3_dpll_clock, "ti,am3-dpll-clock", of_ti_am3_dpll_setup);
static void __init of_ti_am3_core_dpll_setup(struct device_node *node)
{
const struct dpll_data dd = {
.idlest_mask = 0x1,
.enable_mask = 0x7,
.mult_mask = 0x7ff << 8,
.div1_mask = 0x7f,
.max_multiplier = 2047,
.max_divider = 128,
.min_divider = 1,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
};
of_ti_dpll_setup(node, &dpll_core_ck_ops, &dd);
}
CLK_OF_DECLARE(ti_am3_core_dpll_clock, "ti,am3-dpll-core-clock",
of_ti_am3_core_dpll_setup);
static void __init of_ti_omap2_core_dpll_setup(struct device_node *node)
{
const struct dpll_data dd = {
.enable_mask = 0x3,
.mult_mask = 0x3ff << 12,
.div1_mask = 0xf << 8,
.max_divider = 16,
.min_divider = 1,
};
of_ti_dpll_setup(node, &omap2_dpll_core_ck_ops, &dd);
}
CLK_OF_DECLARE(ti_omap2_core_dpll_clock, "ti,omap2-dpll-core-clock",
of_ti_omap2_core_dpll_setup);
Reference in New Issue View Git Blame Copy Permalink