linux/arch/arm/boot/dts/am335x-phycore-som.dtsi
Javier Martinez Canillas 9baa78d644 ARM: dts: am335x-phycore-som: Use AM33XX_IOPAD pinmux macro
Use the pinmux IOPAD macro to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-11-30 08:43:23 -08:00

371 lines
8.2 KiB
Plaintext

/*
* Copyright (C) 2015 Phytec Messtechnik GmbH
* Author: Teresa Remmet <t.remmet@phytec.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include "am33xx.dtsi"
/ {
model = "Phytec AM335x phyCORE";
compatible = "phytec,am335x-phycore-som", "ti,am33xx";
aliases {
rtc0 = &i2c_rtc;
rtc1 = &rtc;
};
cpus {
cpu@0 {
cpu0-supply = <&vdd1_reg>;
};
};
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
regulators {
compatible = "simple-bus";
vcc5v: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "vcc5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
regulator-always-on;
};
};
};
/* Crypto Module */
&aes {
status = "okay";
};
&sham {
status = "okay";
};
/* Ethernet */
&am33xx_pinmux {
ethernet0_pins: pinmux_ethernet0 {
pinctrl-single,pins = <
AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
AM33XX_IOPAD(0x914, PIN_OUTPUT | MUX_MODE1) /* mii1_txen.rmii1_txen */
AM33XX_IOPAD(0x924, PIN_OUTPUT | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk.rmii1_refclk */
>;
};
mdio_pins: pinmux_mdio {
pinctrl-single,pins = <
/* MDIO */
AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
};
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <0>;
phy-mode = "rmii";
dual_emac_res_vlan = <1>;
};
&davinci_mdio {
pinctrl-names = "default";
pinctrl-0 = <&mdio_pins>;
status = "okay";
};
&mac {
slaves = <1>;
pinctrl-names = "default";
pinctrl-0 = <&ethernet0_pins>;
status = "okay";
};
&phy_sel {
rmii-clock-ext;
};
/* I2C Busses */
&am33xx_pinmux {
i2c0_pins: pinmux_i2c0 {
pinctrl-single,pins = <
AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0) /* i2c0_sda.i2c0_sda */
AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
clock-frequency = <400000>;
status = "okay";
tps: pmic@2d {
reg = <0x2d>;
};
i2c_eeprom: eeprom@52 {
compatible = "atmel,24c32";
pagesize = <32>;
reg = <0x52>;
status = "disabled";
};
i2c_rtc: rtc@68 {
compatible = "rv4162";
reg = <0x68>;
status = "disabled";
};
};
/* NAND memory */
&am33xx_pinmux {
nandflash_pins: pinmux_nandflash {
pinctrl-single,pins = <
AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
>;
};
};
&elm {
status = "okay";
};
&gpmc {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&nandflash_pins>;
ranges = <0 0 0x08000000 0x1000000>; /* CS0: NAND */
nandflash: nand@0,0 {
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <8>;
ti,nand-ecc-opt = "bch8";
gpmc,device-nand = "true";
gpmc,device-width = <1>;
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <30>;
gpmc,cs-wr-off-ns = <30>;
gpmc,adv-on-ns = <0>;
gpmc,adv-rd-off-ns = <30>;
gpmc,adv-wr-off-ns = <30>;
gpmc,we-on-ns = <0>;
gpmc,we-off-ns = <20>;
gpmc,oe-on-ns = <10>;
gpmc,oe-off-ns = <30>;
gpmc,access-ns = <30>;
gpmc,rd-cycle-ns = <30>;
gpmc,wr-cycle-ns = <30>;
gpmc,wait-on-read = "true";
gpmc,wait-on-write = "true";
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <50>;
gpmc,cycle2cycle-diffcsen;
gpmc,clk-activation-ns = <0>;
gpmc,wait-monitoring-ns = <0>;
gpmc,wr-access-ns = <30>;
gpmc,wr-data-mux-bus-ns = <0>;
elm_id = <&elm>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "xload";
reg = <0x0 0x20000>;
};
partition@1 {
label = "xload_backup1";
reg = <0x20000 0x20000>;
};
partition@2 {
label = "xload_backup2";
reg = <0x40000 0x20000>;
};
partition@3 {
label = "xload_backup3";
reg = <0x60000 0x20000>;
};
partition@4 {
label = "barebox";
reg = <0x80000 0x80000>;
};
partition@5 {
label = "bareboxenv";
reg = <0x100000 0x40000>;
};
partition@6 {
label = "oftree";
reg = <0x140000 0x40000>;
};
partition@7 {
label = "kernel";
reg = <0x180000 0x800000>;
};
partition@8 {
label = "root";
reg = <0x980000 0x0>;
};
};
};
/* Power */
#include "tps65910.dtsi"
&tps {
vcc1-supply = <&vcc5v>;
vcc2-supply = <&vcc5v>;
vcc3-supply = <&vcc5v>;
vcc4-supply = <&vcc5v>;
vcc5-supply = <&vcc5v>;
vcc6-supply = <&vcc5v>;
vcc7-supply = <&vcc5v>;
vccio-supply = <&vcc5v>;
regulators {
vrtc_reg: regulator@0 {
regulator-always-on;
};
vio_reg: regulator@1 {
regulator-always-on;
};
vdd1_reg: regulator@2 {
/* VDD_MPU voltage limits 0.95V - 1.325V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <912500>;
regulator-max-microvolt = <1378000>;
regulator-boot-on;
regulator-always-on;
};
vdd2_reg: regulator@3 {
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <912500>;
regulator-max-microvolt = <1150000>;
regulator-boot-on;
regulator-always-on;
};
vdd3_reg: regulator@4 {
regulator-always-on;
};
vdig1_reg: regulator@5 {
regulator-name = "vdig1_1p8v";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vdig2_reg: regulator@6 {
regulator-always-on;
};
vpll_reg: regulator@7 {
regulator-always-on;
};
vdac_reg: regulator@8 {
regulator-always-on;
};
vaux1_reg: regulator@9 {
regulator-always-on;
};
vaux2_reg: regulator@10 {
regulator-always-on;
};
vaux33_reg: regulator@11 {
regulator-always-on;
};
vmmc_reg: regulator@12 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
};
/* SPI Busses */
&am33xx_pinmux {
spi0_pins: pinmux_spi0 {
pinctrl-single,pins = <
AM33XX_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE0) /* spi0_clk.spi0_clk */
AM33XX_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0) /* spi0_d0.spi0_d0 */
AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
>;
};
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>;
status = "okay";
serial_flash: m25p80@0 {
compatible = "m25p80";
spi-max-frequency = <48000000>;
reg = <0x0>;
m25p,fast-read;
status = "disabled";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "xload";
reg = <0x0 0x20000>;
};
partition@1 {
label = "barebox";
reg = <0x20000 0x80000>;
};
partition@2 {
label = "bareboxenv";
reg = <0xa0000 0x20000>;
};
partition@3 {
label = "oftree";
reg = <0xc0000 0x20000>;
};
partition@4 {
label = "kernel";
reg = <0xe0000 0x0>;
};
};
};