forked from Minki/linux
9d2770b8e4
dwmmc driver deprecated num-slots and plan to get rid of it finally. Just move a step to cleanup it from DT. Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
497 lines
11 KiB
Plaintext
497 lines
11 KiB
Plaintext
/*
|
|
* TOPEET's Exynos4412 based itop board device tree source
|
|
*
|
|
* Copyright (c) 2016 SUMOMO Computer Association
|
|
* https://www.sumomo.mobi
|
|
* Randy Li <ayaka@soulik.info>
|
|
*
|
|
* Device tree source file for TOPEET iTop Exynos 4412 SCP package core
|
|
* board which is based on Samsung's Exynos4412 SoC.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <dt-bindings/clock/samsung,s2mps11.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include "exynos4412.dtsi"
|
|
#include "exynos4412-ppmu-common.dtsi"
|
|
#include "exynos-mfc-reserved-memory.dtsi"
|
|
|
|
/ {
|
|
memory@40000000 {
|
|
device_type = "memory";
|
|
reg = <0x40000000 0x40000000>;
|
|
};
|
|
|
|
firmware@0203F000 {
|
|
compatible = "samsung,secure-firmware";
|
|
reg = <0x0203F000 0x1000>;
|
|
};
|
|
|
|
fixed-rate-clocks {
|
|
xxti {
|
|
compatible = "samsung,clock-xxti";
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
xusbxti {
|
|
compatible = "samsung,clock-xusbxti";
|
|
clock-frequency = <24000000>;
|
|
};
|
|
};
|
|
|
|
thermal-zones {
|
|
cpu_thermal: cpu-thermal {
|
|
cooling-maps {
|
|
map0 {
|
|
/* Corresponds to 800MHz at freq_table */
|
|
cooling-device = <&cpu0 7 7>;
|
|
};
|
|
map1 {
|
|
/* Corresponds to 200MHz at freq_table */
|
|
cooling-device = <&cpu0 13 13>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
usb-hub {
|
|
compatible = "smsc,usb3503a";
|
|
reset-gpios = <&gpm2 4 GPIO_ACTIVE_LOW>;
|
|
connect-gpios = <&gpm3 3 GPIO_ACTIVE_HIGH>;
|
|
intn-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hsic_reset>;
|
|
};
|
|
};
|
|
|
|
&bus_dmc {
|
|
devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
|
|
vdd-supply = <&buck1_reg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&bus_acp {
|
|
devfreq = <&bus_dmc>;
|
|
status = "okay";
|
|
};
|
|
|
|
&bus_c2c {
|
|
devfreq = <&bus_dmc>;
|
|
status = "okay";
|
|
};
|
|
|
|
&bus_leftbus {
|
|
devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
|
|
vdd-supply = <&buck3_reg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&bus_rightbus {
|
|
devfreq = <&bus_leftbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&bus_fsys {
|
|
devfreq = <&bus_leftbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&bus_peri {
|
|
devfreq = <&bus_leftbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&bus_mfc {
|
|
devfreq = <&bus_leftbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu0-supply = <&buck2_reg>;
|
|
};
|
|
|
|
&hsotg {
|
|
vusb_d-supply = <&ldo15_reg>;
|
|
vusb_a-supply = <&ldo12_reg>;
|
|
};
|
|
|
|
&i2c_1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-max-bus-freq = <400000>;
|
|
pinctrl-0 = <&i2c1_bus>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
s5m8767: s5m8767-pmic@66 {
|
|
compatible = "samsung,s5m8767-pmic";
|
|
reg = <0x66>;
|
|
|
|
s5m8767,pmic-buck-default-dvs-idx = <3>;
|
|
|
|
s5m8767,pmic-buck-dvs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>,
|
|
<&gpb 6 GPIO_ACTIVE_HIGH>,
|
|
<&gpb 7 GPIO_ACTIVE_HIGH>;
|
|
|
|
s5m8767,pmic-buck-ds-gpios = <&gpm3 5 GPIO_ACTIVE_HIGH>,
|
|
<&gpm3 6 GPIO_ACTIVE_HIGH>,
|
|
<&gpm3 7 GPIO_ACTIVE_HIGH>;
|
|
|
|
/* VDD_ARM */
|
|
s5m8767,pmic-buck2-dvs-voltage = <1356250>, <1300000>,
|
|
<1243750>, <1118750>,
|
|
<1068750>, <1012500>,
|
|
<956250>, <900000>;
|
|
/* VDD_INT */
|
|
s5m8767,pmic-buck3-dvs-voltage = <1000000>, <1000000>,
|
|
<925000>, <925000>,
|
|
<887500>, <887500>,
|
|
<850000>, <850000>;
|
|
/* VDD_G3D */
|
|
s5m8767,pmic-buck4-dvs-voltage = <1081250>, <1081250>,
|
|
<1025000>, <950000>,
|
|
<918750>, <900000>,
|
|
<875000>, <831250>;
|
|
|
|
regulators {
|
|
ldo1_reg: LDO1 {
|
|
regulator-name = "VDD_ALIVE";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
/* SCP uses 1.5v, POP uses 1.2v */
|
|
ldo2_reg: LDO2 {
|
|
regulator-name = "VDDQ_M12";
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo3_reg: LDO3 {
|
|
regulator-name = "VDDIOAP_18";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo4_reg: LDO4 {
|
|
regulator-name = "VDDQ_PRE";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo5_reg: LDO5 {
|
|
regulator-name = "VDD_LDO5";
|
|
op_mode = <0>; /* Always off Mode */
|
|
};
|
|
|
|
ldo6_reg: LDO6 {
|
|
regulator-name = "VDD10_MPLL";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo7_reg: LDO7 {
|
|
regulator-name = "VDD10_XPLL";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo8_reg: LDO8 {
|
|
regulator-name = "VDD10_MIPI";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo9_reg: LDO9 {
|
|
regulator-name = "VDD33_LCD";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo10_reg: LDO10 {
|
|
regulator-name = "VDD18_MIPI";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo11_reg: LDO11 {
|
|
regulator-name = "VDD18_ABB1";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo12_reg: LDO12 {
|
|
regulator-name = "VDD33_UOTG";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo13_reg: LDO13 {
|
|
regulator-name = "VDDIOPERI_18";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo14_reg: LDO14 {
|
|
regulator-name = "VDD18_ABB02";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo15_reg: LDO15 {
|
|
regulator-name = "VDD10_USH";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo16_reg: LDO16 {
|
|
regulator-name = "VDD18_HSIC";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo17_reg: LDO17 {
|
|
regulator-name = "VDDIOAP_MMC012_28";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
/* Used by HSIC */
|
|
ldo18_reg: LDO18 {
|
|
regulator-name = "VDDIOPERI_28";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo19_reg: LDO19 {
|
|
regulator-name = "VDD_LDO19";
|
|
op_mode = <0>; /* Always off Mode */
|
|
};
|
|
|
|
ldo20_reg: LDO20 {
|
|
regulator-name = "VDD28_CAM";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo21_reg: LDO21 {
|
|
regulator-name = "VDD28_AF";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo22_reg: LDO22 {
|
|
regulator-name = "VDDA28_2M";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo23_reg: LDO23 {
|
|
regulator-name = "VDD28_TF";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo24_reg: LDO24 {
|
|
regulator-name = "VDD33_A31";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo25_reg: LDO25 {
|
|
regulator-name = "VDD18_CAM";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo26_reg: LDO26 {
|
|
regulator-name = "VDD18_A31";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo27_reg: LDO27 {
|
|
regulator-name = "GPS_1V8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo28_reg: LDO28 {
|
|
regulator-name = "DVDD12";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
buck1_reg: BUCK1 {
|
|
regulator-name = "vdd_mif";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
buck2_reg: BUCK2 {
|
|
regulator-name = "vdd_arm";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1456250>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
buck3_reg: BUCK3 {
|
|
regulator-name = "vdd_int";
|
|
regulator-min-microvolt = <875000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
buck4_reg: BUCK4 {
|
|
regulator-name = "vdd_g3d";
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
buck5_reg: BUCK5 {
|
|
regulator-name = "vdd_m12";
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
buck6_reg: BUCK6 {
|
|
regulator-name = "vdd12_5m";
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
buck7_reg: BUCK7 {
|
|
regulator-name = "pvdd_buck7";
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <2000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
buck8_reg: BUCK8 {
|
|
regulator-name = "pvdd_buck8";
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
buck9_reg: BUCK9 {
|
|
regulator-name = "vddf28_emmc";
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
};
|
|
|
|
s5m8767_osc: clocks {
|
|
#clock-cells = <1>;
|
|
clock-output-names = "s5m8767_ap",
|
|
"s5m8767_cp", "s5m8767_bt";
|
|
};
|
|
|
|
};
|
|
};
|
|
|
|
&mfc {
|
|
status = "okay";
|
|
};
|
|
|
|
&mshc_0 {
|
|
pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
vmmc-supply = <&buck9_reg>;
|
|
broken-cd;
|
|
card-detect-delay = <200>;
|
|
samsung,dw-mshc-ciu-div = <3>;
|
|
samsung,dw-mshc-sdr-timing = <2 3>;
|
|
samsung,dw-mshc-ddr-timing = <1 2>;
|
|
bus-width = <8>;
|
|
cap-mmc-highspeed;
|
|
};
|
|
|
|
&pinctrl_1 {
|
|
hsic_reset: hsic-reset {
|
|
samsung,pins = "gpm2-4";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
|
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
|
|
};
|
|
};
|
|
|
|
&rtc {
|
|
status = "okay";
|
|
clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>;
|
|
clock-names = "rtc", "rtc_src";
|
|
};
|
|
|
|
&tmu {
|
|
vtmu-supply = <&ldo16_reg>;
|
|
status = "okay";
|
|
};
|