forked from Minki/linux
81933d3e48
The platform_set_drvdata() call is only useful if we need to retrieve back the private information. Since the driver doesn't do that, it's not useful to have it. If this is removed, we can also just do a direct return on devm_gpiochip_add_data(). We don't need to print that this call failed as there are other ways to log/see this during probe. This change isn't removing the 'DT probe failed' message, as some may find it useful as a reason for the failed probe. But that can be part of another change if needed. Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
188 lines
5.0 KiB
C
188 lines
5.0 KiB
C
/*
|
|
* SPEAr platform SPI chipselect abstraction over gpiolib
|
|
*
|
|
* Copyright (C) 2012 ST Microelectronics
|
|
* Shiraz Hashim <shiraz.linux.kernel@gmail.com>
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/io.h>
|
|
#include <linux/init.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/types.h>
|
|
|
|
/* maximum chipselects */
|
|
#define NUM_OF_GPIO 4
|
|
|
|
/*
|
|
* Provision is available on some SPEAr SoCs to control ARM PL022 spi cs
|
|
* through system registers. This register lies outside spi (pl022)
|
|
* address space into system registers.
|
|
*
|
|
* It provides control for spi chip select lines so that any chipselect
|
|
* (out of 4 possible chipselects in pl022) can be made low to select
|
|
* the particular slave.
|
|
*/
|
|
|
|
/**
|
|
* struct spear_spics - represents spi chip select control
|
|
* @base: base address
|
|
* @perip_cfg: configuration register
|
|
* @sw_enable_bit: bit to enable s/w control over chipselects
|
|
* @cs_value_bit: bit to program high or low chipselect
|
|
* @cs_enable_mask: mask to select bits required to select chipselect
|
|
* @cs_enable_shift: bit pos of cs_enable_mask
|
|
* @use_count: use count of a spi controller cs lines
|
|
* @last_off: stores last offset caller of set_value()
|
|
* @chip: gpio_chip abstraction
|
|
*/
|
|
struct spear_spics {
|
|
void __iomem *base;
|
|
u32 perip_cfg;
|
|
u32 sw_enable_bit;
|
|
u32 cs_value_bit;
|
|
u32 cs_enable_mask;
|
|
u32 cs_enable_shift;
|
|
unsigned long use_count;
|
|
int last_off;
|
|
struct gpio_chip chip;
|
|
};
|
|
|
|
/* gpio framework specific routines */
|
|
static int spics_get_value(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
return -ENXIO;
|
|
}
|
|
|
|
static void spics_set_value(struct gpio_chip *chip, unsigned offset, int value)
|
|
{
|
|
struct spear_spics *spics = gpiochip_get_data(chip);
|
|
u32 tmp;
|
|
|
|
/* select chip select from register */
|
|
tmp = readl_relaxed(spics->base + spics->perip_cfg);
|
|
if (spics->last_off != offset) {
|
|
spics->last_off = offset;
|
|
tmp &= ~(spics->cs_enable_mask << spics->cs_enable_shift);
|
|
tmp |= offset << spics->cs_enable_shift;
|
|
}
|
|
|
|
/* toggle chip select line */
|
|
tmp &= ~(0x1 << spics->cs_value_bit);
|
|
tmp |= value << spics->cs_value_bit;
|
|
writel_relaxed(tmp, spics->base + spics->perip_cfg);
|
|
}
|
|
|
|
static int spics_direction_input(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
return -ENXIO;
|
|
}
|
|
|
|
static int spics_direction_output(struct gpio_chip *chip, unsigned offset,
|
|
int value)
|
|
{
|
|
spics_set_value(chip, offset, value);
|
|
return 0;
|
|
}
|
|
|
|
static int spics_request(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct spear_spics *spics = gpiochip_get_data(chip);
|
|
u32 tmp;
|
|
|
|
if (!spics->use_count++) {
|
|
tmp = readl_relaxed(spics->base + spics->perip_cfg);
|
|
tmp |= 0x1 << spics->sw_enable_bit;
|
|
tmp |= 0x1 << spics->cs_value_bit;
|
|
writel_relaxed(tmp, spics->base + spics->perip_cfg);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void spics_free(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct spear_spics *spics = gpiochip_get_data(chip);
|
|
u32 tmp;
|
|
|
|
if (!--spics->use_count) {
|
|
tmp = readl_relaxed(spics->base + spics->perip_cfg);
|
|
tmp &= ~(0x1 << spics->sw_enable_bit);
|
|
writel_relaxed(tmp, spics->base + spics->perip_cfg);
|
|
}
|
|
}
|
|
|
|
static int spics_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct spear_spics *spics;
|
|
|
|
spics = devm_kzalloc(&pdev->dev, sizeof(*spics), GFP_KERNEL);
|
|
if (!spics)
|
|
return -ENOMEM;
|
|
|
|
spics->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(spics->base))
|
|
return PTR_ERR(spics->base);
|
|
|
|
if (of_property_read_u32(np, "st-spics,peripcfg-reg",
|
|
&spics->perip_cfg))
|
|
goto err_dt_data;
|
|
if (of_property_read_u32(np, "st-spics,sw-enable-bit",
|
|
&spics->sw_enable_bit))
|
|
goto err_dt_data;
|
|
if (of_property_read_u32(np, "st-spics,cs-value-bit",
|
|
&spics->cs_value_bit))
|
|
goto err_dt_data;
|
|
if (of_property_read_u32(np, "st-spics,cs-enable-mask",
|
|
&spics->cs_enable_mask))
|
|
goto err_dt_data;
|
|
if (of_property_read_u32(np, "st-spics,cs-enable-shift",
|
|
&spics->cs_enable_shift))
|
|
goto err_dt_data;
|
|
|
|
spics->chip.ngpio = NUM_OF_GPIO;
|
|
spics->chip.base = -1;
|
|
spics->chip.request = spics_request;
|
|
spics->chip.free = spics_free;
|
|
spics->chip.direction_input = spics_direction_input;
|
|
spics->chip.direction_output = spics_direction_output;
|
|
spics->chip.get = spics_get_value;
|
|
spics->chip.set = spics_set_value;
|
|
spics->chip.label = dev_name(&pdev->dev);
|
|
spics->chip.parent = &pdev->dev;
|
|
spics->chip.owner = THIS_MODULE;
|
|
spics->last_off = -1;
|
|
|
|
return devm_gpiochip_add_data(&pdev->dev, &spics->chip, spics);
|
|
|
|
err_dt_data:
|
|
dev_err(&pdev->dev, "DT probe failed\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct of_device_id spics_gpio_of_match[] = {
|
|
{ .compatible = "st,spear-spics-gpio" },
|
|
{}
|
|
};
|
|
|
|
static struct platform_driver spics_gpio_driver = {
|
|
.probe = spics_gpio_probe,
|
|
.driver = {
|
|
.name = "spear-spics-gpio",
|
|
.of_match_table = spics_gpio_of_match,
|
|
},
|
|
};
|
|
|
|
static int __init spics_gpio_init(void)
|
|
{
|
|
return platform_driver_register(&spics_gpio_driver);
|
|
}
|
|
subsys_initcall(spics_gpio_init);
|