A platform_driver need not set an owner since it will be populated by platform_driver_register(). Likewise for mcb_driver (gpio-menz127.c). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
		
			
				
	
	
		
			429 lines
		
	
	
		
			10 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			429 lines
		
	
	
		
			10 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * GPIO driver for the SMSC SCH311x Super-I/O chips
 | |
|  *
 | |
|  * Copyright (C) 2013 Bruno Randolf <br1@einfach.org>
 | |
|  *
 | |
|  * SuperIO functions and chip detection:
 | |
|  * (c) Copyright 2008 Wim Van Sebroeck <wim@iguana.be>.
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or modify
 | |
|  * it under the terms of the GNU General Public License as published by
 | |
|  * the Free Software Foundation; either version 2 of the License, or
 | |
|  * (at your option) any later version.
 | |
|  */
 | |
| 
 | |
| #include <linux/ioport.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/platform_device.h>
 | |
| #include <linux/gpio.h>
 | |
| #include <linux/bitops.h>
 | |
| #include <linux/io.h>
 | |
| 
 | |
| #define DRV_NAME			"gpio-sch311x"
 | |
| 
 | |
| #define SCH311X_GPIO_CONF_OUT		0x00
 | |
| #define SCH311X_GPIO_CONF_IN		0x01
 | |
| #define SCH311X_GPIO_CONF_INVERT	0x02
 | |
| #define SCH311X_GPIO_CONF_OPEN_DRAIN	0x80
 | |
| 
 | |
| #define SIO_CONFIG_KEY_ENTER		0x55
 | |
| #define SIO_CONFIG_KEY_EXIT		0xaa
 | |
| 
 | |
| #define GP1				0x4b
 | |
| 
 | |
| static int sch311x_ioports[] = { 0x2e, 0x4e, 0x162e, 0x164e };
 | |
| 
 | |
| static struct platform_device *sch311x_gpio_pdev;
 | |
| 
 | |
| struct sch311x_pdev_data {		/* platform device data */
 | |
| 	unsigned short runtime_reg;	/* runtime register base address */
 | |
| };
 | |
| 
 | |
| struct sch311x_gpio_block {		/* one GPIO block runtime data */
 | |
| 	struct gpio_chip chip;
 | |
| 	unsigned short data_reg;	/* from definition below */
 | |
| 	unsigned short *config_regs;	/* pointer to definition below */
 | |
| 	unsigned short runtime_reg;	/* runtime register */
 | |
| 	spinlock_t lock;		/* lock for this GPIO block */
 | |
| };
 | |
| 
 | |
| struct sch311x_gpio_priv {		/* driver private data */
 | |
| 	struct sch311x_gpio_block blocks[6];
 | |
| };
 | |
| 
 | |
| struct sch311x_gpio_block_def {		/* register address definitions */
 | |
| 	unsigned short data_reg;
 | |
| 	unsigned short config_regs[8];
 | |
| 	unsigned short base;
 | |
| };
 | |
| 
 | |
| /* Note: some GPIOs are not available, these are marked with 0x00 */
 | |
| 
 | |
| static struct sch311x_gpio_block_def sch311x_gpio_blocks[] = {
 | |
| 	{
 | |
| 		.data_reg = 0x4b,	/* GP1 */
 | |
| 		.config_regs = {0x23, 0x24, 0x25, 0x26, 0x27, 0x29, 0x2a, 0x2b},
 | |
| 		.base = 10,
 | |
| 	},
 | |
| 	{
 | |
| 		.data_reg = 0x4c,	/* GP2 */
 | |
| 		.config_regs = {0x00, 0x2c, 0x2d, 0x00, 0x00, 0x00, 0x00, 0x32},
 | |
| 		.base = 20,
 | |
| 	},
 | |
| 	{
 | |
| 		.data_reg = 0x4d,	/* GP3 */
 | |
| 		.config_regs = {0x33, 0x34, 0x35, 0x36, 0x37, 0x00, 0x39, 0x3a},
 | |
| 		.base = 30,
 | |
| 	},
 | |
| 	{
 | |
| 		.data_reg = 0x4e,	/* GP4 */
 | |
| 		.config_regs = {0x3b, 0x00, 0x3d, 0x00, 0x6e, 0x6f, 0x72, 0x73},
 | |
| 		.base = 40,
 | |
| 	},
 | |
| 	{
 | |
| 		.data_reg = 0x4f,	/* GP5 */
 | |
| 		.config_regs = {0x3f, 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46},
 | |
| 		.base = 50,
 | |
| 	},
 | |
| 	{
 | |
| 		.data_reg = 0x50,	/* GP6 */
 | |
| 		.config_regs = {0x47, 0x48, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59},
 | |
| 		.base = 60,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| /*
 | |
|  *	Super-IO functions
 | |
|  */
 | |
| 
 | |
| static inline int sch311x_sio_enter(int sio_config_port)
 | |
| {
 | |
| 	/* Don't step on other drivers' I/O space by accident. */
 | |
| 	if (!request_muxed_region(sio_config_port, 2, DRV_NAME)) {
 | |
| 		pr_err(DRV_NAME "I/O address 0x%04x already in use\n",
 | |
| 		       sio_config_port);
 | |
| 		return -EBUSY;
 | |
| 	}
 | |
| 
 | |
| 	outb(SIO_CONFIG_KEY_ENTER, sio_config_port);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static inline void sch311x_sio_exit(int sio_config_port)
 | |
| {
 | |
| 	outb(SIO_CONFIG_KEY_EXIT, sio_config_port);
 | |
| 	release_region(sio_config_port, 2);
 | |
| }
 | |
| 
 | |
| static inline int sch311x_sio_inb(int sio_config_port, int reg)
 | |
| {
 | |
| 	outb(reg, sio_config_port);
 | |
| 	return inb(sio_config_port + 1);
 | |
| }
 | |
| 
 | |
| static inline void sch311x_sio_outb(int sio_config_port, int reg, int val)
 | |
| {
 | |
| 	outb(reg, sio_config_port);
 | |
| 	outb(val, sio_config_port + 1);
 | |
| }
 | |
| 
 | |
| 
 | |
| /*
 | |
|  *	GPIO functions
 | |
|  */
 | |
| 
 | |
| static int sch311x_gpio_request(struct gpio_chip *chip, unsigned offset)
 | |
| {
 | |
| 	struct sch311x_gpio_block *block = gpiochip_get_data(chip);
 | |
| 
 | |
| 	if (block->config_regs[offset] == 0) /* GPIO is not available */
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	if (!request_region(block->runtime_reg + block->config_regs[offset],
 | |
| 			    1, DRV_NAME)) {
 | |
| 		dev_err(chip->parent, "Failed to request region 0x%04x.\n",
 | |
| 			block->runtime_reg + block->config_regs[offset]);
 | |
| 		return -EBUSY;
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void sch311x_gpio_free(struct gpio_chip *chip, unsigned offset)
 | |
| {
 | |
| 	struct sch311x_gpio_block *block = gpiochip_get_data(chip);
 | |
| 
 | |
| 	if (block->config_regs[offset] == 0) /* GPIO is not available */
 | |
| 		return;
 | |
| 
 | |
| 	release_region(block->runtime_reg + block->config_regs[offset], 1);
 | |
| }
 | |
| 
 | |
| static int sch311x_gpio_get(struct gpio_chip *chip, unsigned offset)
 | |
| {
 | |
| 	struct sch311x_gpio_block *block = gpiochip_get_data(chip);
 | |
| 	unsigned char data;
 | |
| 
 | |
| 	spin_lock(&block->lock);
 | |
| 	data = inb(block->runtime_reg + block->data_reg);
 | |
| 	spin_unlock(&block->lock);
 | |
| 
 | |
| 	return !!(data & BIT(offset));
 | |
| }
 | |
| 
 | |
| static void __sch311x_gpio_set(struct sch311x_gpio_block *block,
 | |
| 			       unsigned offset, int value)
 | |
| {
 | |
| 	unsigned char data = inb(block->runtime_reg + block->data_reg);
 | |
| 	if (value)
 | |
| 		data |= BIT(offset);
 | |
| 	else
 | |
| 		data &= ~BIT(offset);
 | |
| 	outb(data, block->runtime_reg + block->data_reg);
 | |
| }
 | |
| 
 | |
| static void sch311x_gpio_set(struct gpio_chip *chip, unsigned offset,
 | |
| 			     int value)
 | |
| {
 | |
| 	struct sch311x_gpio_block *block = gpiochip_get_data(chip);
 | |
| 
 | |
| 	spin_lock(&block->lock);
 | |
| 	 __sch311x_gpio_set(block, offset, value);
 | |
| 	spin_unlock(&block->lock);
 | |
| }
 | |
| 
 | |
| static int sch311x_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
 | |
| {
 | |
| 	struct sch311x_gpio_block *block = gpiochip_get_data(chip);
 | |
| 
 | |
| 	spin_lock(&block->lock);
 | |
| 	outb(SCH311X_GPIO_CONF_IN, block->runtime_reg +
 | |
| 	     block->config_regs[offset]);
 | |
| 	spin_unlock(&block->lock);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int sch311x_gpio_direction_out(struct gpio_chip *chip, unsigned offset,
 | |
| 				      int value)
 | |
| {
 | |
| 	struct sch311x_gpio_block *block = gpiochip_get_data(chip);
 | |
| 
 | |
| 	spin_lock(&block->lock);
 | |
| 
 | |
| 	outb(SCH311X_GPIO_CONF_OUT, block->runtime_reg +
 | |
| 	     block->config_regs[offset]);
 | |
| 
 | |
| 	__sch311x_gpio_set(block, offset, value);
 | |
| 
 | |
| 	spin_unlock(&block->lock);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int sch311x_gpio_probe(struct platform_device *pdev)
 | |
| {
 | |
| 	struct sch311x_pdev_data *pdata = dev_get_platdata(&pdev->dev);
 | |
| 	struct sch311x_gpio_priv *priv;
 | |
| 	struct sch311x_gpio_block *block;
 | |
| 	int err, i;
 | |
| 
 | |
| 	/* we can register all GPIO data registers at once */
 | |
| 	if (!devm_request_region(&pdev->dev, pdata->runtime_reg + GP1, 6,
 | |
| 		DRV_NAME)) {
 | |
| 		dev_err(&pdev->dev, "Failed to request region 0x%04x-0x%04x.\n",
 | |
| 			pdata->runtime_reg + GP1, pdata->runtime_reg + GP1 + 5);
 | |
| 		return -EBUSY;
 | |
| 	}
 | |
| 
 | |
| 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
 | |
| 	if (!priv)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	platform_set_drvdata(pdev, priv);
 | |
| 
 | |
| 	for (i = 0; i < ARRAY_SIZE(priv->blocks); i++) {
 | |
| 		block = &priv->blocks[i];
 | |
| 
 | |
| 		spin_lock_init(&block->lock);
 | |
| 
 | |
| 		block->chip.label = DRV_NAME;
 | |
| 		block->chip.owner = THIS_MODULE;
 | |
| 		block->chip.request = sch311x_gpio_request;
 | |
| 		block->chip.free = sch311x_gpio_free;
 | |
| 		block->chip.direction_input = sch311x_gpio_direction_in;
 | |
| 		block->chip.direction_output = sch311x_gpio_direction_out;
 | |
| 		block->chip.get = sch311x_gpio_get;
 | |
| 		block->chip.set = sch311x_gpio_set;
 | |
| 		block->chip.ngpio = 8;
 | |
| 		block->chip.parent = &pdev->dev;
 | |
| 		block->chip.base = sch311x_gpio_blocks[i].base;
 | |
| 		block->config_regs = sch311x_gpio_blocks[i].config_regs;
 | |
| 		block->data_reg = sch311x_gpio_blocks[i].data_reg;
 | |
| 		block->runtime_reg = pdata->runtime_reg;
 | |
| 
 | |
| 		err = gpiochip_add_data(&block->chip, block);
 | |
| 		if (err < 0) {
 | |
| 			dev_err(&pdev->dev,
 | |
| 				"Could not register gpiochip, %d\n", err);
 | |
| 			goto exit_err;
 | |
| 		}
 | |
| 		dev_info(&pdev->dev,
 | |
| 			 "SMSC SCH311x GPIO block %d registered.\n", i);
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| exit_err:
 | |
| 	/* release already registered chips */
 | |
| 	for (--i; i >= 0; i--)
 | |
| 		gpiochip_remove(&priv->blocks[i].chip);
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static int sch311x_gpio_remove(struct platform_device *pdev)
 | |
| {
 | |
| 	struct sch311x_gpio_priv *priv = platform_get_drvdata(pdev);
 | |
| 	int i;
 | |
| 
 | |
| 	for (i = 0; i < ARRAY_SIZE(priv->blocks); i++) {
 | |
| 		gpiochip_remove(&priv->blocks[i].chip);
 | |
| 		dev_info(&pdev->dev,
 | |
| 			 "SMSC SCH311x GPIO block %d unregistered.\n", i);
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static struct platform_driver sch311x_gpio_driver = {
 | |
| 	.driver.name	= DRV_NAME,
 | |
| 	.probe		= sch311x_gpio_probe,
 | |
| 	.remove		= sch311x_gpio_remove,
 | |
| };
 | |
| 
 | |
| 
 | |
| /*
 | |
|  *	Init & exit routines
 | |
|  */
 | |
| 
 | |
| static int __init sch311x_detect(int sio_config_port, unsigned short *addr)
 | |
| {
 | |
| 	int err = 0, reg;
 | |
| 	unsigned short base_addr;
 | |
| 	unsigned char dev_id;
 | |
| 
 | |
| 	err = sch311x_sio_enter(sio_config_port);
 | |
| 	if (err)
 | |
| 		return err;
 | |
| 
 | |
| 	/* Check device ID. */
 | |
| 	reg = sch311x_sio_inb(sio_config_port, 0x20);
 | |
| 	switch (reg) {
 | |
| 	case 0x7c: /* SCH3112 */
 | |
| 		dev_id = 2;
 | |
| 		break;
 | |
| 	case 0x7d: /* SCH3114 */
 | |
| 		dev_id = 4;
 | |
| 		break;
 | |
| 	case 0x7f: /* SCH3116 */
 | |
| 		dev_id = 6;
 | |
| 		break;
 | |
| 	default:
 | |
| 		err = -ENODEV;
 | |
| 		goto exit;
 | |
| 	}
 | |
| 
 | |
| 	/* Select logical device A (runtime registers) */
 | |
| 	sch311x_sio_outb(sio_config_port, 0x07, 0x0a);
 | |
| 
 | |
| 	/* Check if Logical Device Register is currently active */
 | |
| 	if ((sch311x_sio_inb(sio_config_port, 0x30) & 0x01) == 0)
 | |
| 		pr_info("Seems that LDN 0x0a is not active...\n");
 | |
| 
 | |
| 	/* Get the base address of the runtime registers */
 | |
| 	base_addr = (sch311x_sio_inb(sio_config_port, 0x60) << 8) |
 | |
| 			   sch311x_sio_inb(sio_config_port, 0x61);
 | |
| 	if (!base_addr) {
 | |
| 		pr_err("Base address not set\n");
 | |
| 		err = -ENODEV;
 | |
| 		goto exit;
 | |
| 	}
 | |
| 	*addr = base_addr;
 | |
| 
 | |
| 	pr_info("Found an SMSC SCH311%d chip at 0x%04x\n", dev_id, base_addr);
 | |
| 
 | |
| exit:
 | |
| 	sch311x_sio_exit(sio_config_port);
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static int __init sch311x_gpio_pdev_add(const unsigned short addr)
 | |
| {
 | |
| 	struct sch311x_pdev_data pdata;
 | |
| 	int err;
 | |
| 
 | |
| 	pdata.runtime_reg = addr;
 | |
| 
 | |
| 	sch311x_gpio_pdev = platform_device_alloc(DRV_NAME, -1);
 | |
| 	if (!sch311x_gpio_pdev)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	err = platform_device_add_data(sch311x_gpio_pdev,
 | |
| 				       &pdata, sizeof(pdata));
 | |
| 	if (err) {
 | |
| 		pr_err(DRV_NAME "Platform data allocation failed\n");
 | |
| 		goto err;
 | |
| 	}
 | |
| 
 | |
| 	err = platform_device_add(sch311x_gpio_pdev);
 | |
| 	if (err) {
 | |
| 		pr_err(DRV_NAME "Device addition failed\n");
 | |
| 		goto err;
 | |
| 	}
 | |
| 	return 0;
 | |
| 
 | |
| err:
 | |
| 	platform_device_put(sch311x_gpio_pdev);
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static int __init sch311x_gpio_init(void)
 | |
| {
 | |
| 	int err, i;
 | |
| 	unsigned short addr = 0;
 | |
| 
 | |
| 	for (i = 0; i < ARRAY_SIZE(sch311x_ioports); i++)
 | |
| 		if (sch311x_detect(sch311x_ioports[i], &addr) == 0)
 | |
| 			break;
 | |
| 
 | |
| 	if (!addr)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	err = platform_driver_register(&sch311x_gpio_driver);
 | |
| 	if (err)
 | |
| 		return err;
 | |
| 
 | |
| 	err = sch311x_gpio_pdev_add(addr);
 | |
| 	if (err)
 | |
| 		goto unreg_platform_driver;
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| unreg_platform_driver:
 | |
| 	platform_driver_unregister(&sch311x_gpio_driver);
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static void __exit sch311x_gpio_exit(void)
 | |
| {
 | |
| 	platform_device_unregister(sch311x_gpio_pdev);
 | |
| 	platform_driver_unregister(&sch311x_gpio_driver);
 | |
| }
 | |
| 
 | |
| module_init(sch311x_gpio_init);
 | |
| module_exit(sch311x_gpio_exit);
 | |
| 
 | |
| MODULE_AUTHOR("Bruno Randolf <br1@einfach.org>");
 | |
| MODULE_DESCRIPTION("SMSC SCH311x GPIO Driver");
 | |
| MODULE_LICENSE("GPL");
 | |
| MODULE_ALIAS("platform:gpio-sch311x");
 |