leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
026abc3332
linux/drivers/gpu/drm/gma500/mdfld_device.c
Kirill A. Shutemov 026abc3332 gma500: initial medfield merge 
We need to merge this ahead of some of the cleanup because a lot of needed
cleanup spans both new and old chips. If we try and clean up and the merge
we end up fighting ourselves.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
[With a load of the cleanup stuff folded in, register stuff reworked sanely]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-10 13:05:48 +00:00

692 lines
18 KiB
C
Raw Blame History

/**************************************************************************
* Copyright (c) 2011, Intel Corporation.
* All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*
**************************************************************************/
#include "psb_drv.h"
#include "mid_bios.h"
#include "mdfld_output.h"
#include "mdfld_dsi_output.h"
#include "tc35876x-dsi-lvds.h"
#include <asm/intel_scu_ipc.h>
#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
#define MRST_BLC_MAX_PWM_REG_FREQ 0xFFFF
#define BLC_PWM_PRECISION_FACTOR 100 /* 10000000 */
#define BLC_PWM_FREQ_CALC_CONSTANT 32
#define MHz 1000000
#define BRIGHTNESS_MIN_LEVEL 1
#define BRIGHTNESS_MAX_LEVEL 100
#define BRIGHTNESS_MASK 0xFF
#define BLC_POLARITY_NORMAL 0
#define BLC_POLARITY_INVERSE 1
#define BLC_ADJUSTMENT_MAX 100
#define MDFLD_BLC_PWM_PRECISION_FACTOR 10
#define MDFLD_BLC_MAX_PWM_REG_FREQ 0xFFFE
#define MDFLD_BLC_MIN_PWM_REG_FREQ 0x2
#define MDFLD_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE)
#define MDFLD_BACKLIGHT_PWM_CTL_SHIFT (16)
static struct backlight_device *mdfld_backlight_device;
int mdfld_set_brightness(struct backlight_device *bd)
{
struct drm_device *dev =
(struct drm_device *)bl_get_data(mdfld_backlight_device);
struct drm_psb_private *dev_priv = dev->dev_private;
int level = bd->props.brightness;
DRM_DEBUG_DRIVER("backlight level set to %d\n", level);
/* Perform value bounds checking */
if (level < BRIGHTNESS_MIN_LEVEL)
level = BRIGHTNESS_MIN_LEVEL;
if (gma_power_begin(dev, false)) {
u32 adjusted_level = 0;
/*
* Adjust the backlight level with the percent in
* dev_priv->blc_adj2
*/
adjusted_level = level * dev_priv->blc_adj2;
adjusted_level = adjusted_level / BLC_ADJUSTMENT_MAX;
dev_priv->brightness_adjusted = adjusted_level;
if (mdfld_get_panel_type(dev, 0) == TC35876X) {
if (dev_priv->dpi_panel_on[0] ||
dev_priv->dpi_panel_on[2])
tc35876x_brightness_control(dev,
dev_priv->brightness_adjusted);
} else {
if (dev_priv->dpi_panel_on[0])
mdfld_dsi_brightness_control(dev, 0,
dev_priv->brightness_adjusted);
}
if (dev_priv->dpi_panel_on[2])
mdfld_dsi_brightness_control(dev, 2,
dev_priv->brightness_adjusted);
gma_power_end(dev);
}
/* cache the brightness for later use */
dev_priv->brightness = level;
return 0;
}
int mdfld_get_brightness(struct backlight_device *bd)
{
struct drm_device *dev =
(struct drm_device *)bl_get_data(mdfld_backlight_device);
struct drm_psb_private *dev_priv = dev->dev_private;
DRM_DEBUG_DRIVER("brightness = 0x%x \n", dev_priv->brightness);
/* return locally cached var instead of HW read (due to DPST etc.) */
return dev_priv->brightness;
}
static const struct backlight_ops mdfld_ops = {
.get_brightness = mdfld_get_brightness,
.update_status = mdfld_set_brightness,
};
static int device_backlight_init(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = (struct drm_psb_private *)
dev->dev_private;
dev_priv->blc_adj1 = BLC_ADJUSTMENT_MAX;
dev_priv->blc_adj2 = BLC_ADJUSTMENT_MAX;
return 0;
}
int mdfld_backlight_init(struct drm_device *dev)
{
struct backlight_properties props;
int ret = 0;
memset(&props, 0, sizeof(struct backlight_properties));
props.max_brightness = BRIGHTNESS_MAX_LEVEL;
props.type = BACKLIGHT_PLATFORM;
mdfld_backlight_device = backlight_device_register("mdfld-bl",
NULL, (void *)dev, &mdfld_ops, &props);
if (IS_ERR(mdfld_backlight_device))
return PTR_ERR(mdfld_backlight_device);
ret = device_backlight_init(dev);
if (ret)
return ret;
mdfld_backlight_device->props.brightness = BRIGHTNESS_MAX_LEVEL;
mdfld_backlight_device->props.max_brightness = BRIGHTNESS_MAX_LEVEL;
backlight_update_status(mdfld_backlight_device);
return 0;
}
#endif
struct backlight_device *mdfld_get_backlight_device(void)
{
#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
return mdfld_backlight_device;
#else
return NULL;
#endif
}
/*
* mdfld_save_display_registers
*
* Description: We are going to suspend so save current display
* register state.
*
* Notes: FIXME_JLIU7 need to add the support for DPI MIPI & HDMI audio
*/
static int mdfld_save_display_registers(struct drm_device *dev, int pipe)
{
struct drm_psb_private *dev_priv = dev->dev_private;
struct medfield_state *regs = &dev_priv->regs.mdfld;
int i;
/* register */
u32 dpll_reg = MRST_DPLL_A;
u32 fp_reg = MRST_FPA0;
u32 pipeconf_reg = PIPEACONF;
u32 htot_reg = HTOTAL_A;
u32 hblank_reg = HBLANK_A;
u32 hsync_reg = HSYNC_A;
u32 vtot_reg = VTOTAL_A;
u32 vblank_reg = VBLANK_A;
u32 vsync_reg = VSYNC_A;
u32 pipesrc_reg = PIPEASRC;
u32 dspstride_reg = DSPASTRIDE;
u32 dsplinoff_reg = DSPALINOFF;
u32 dsptileoff_reg = DSPATILEOFF;
u32 dspsize_reg = DSPASIZE;
u32 dsppos_reg = DSPAPOS;
u32 dspsurf_reg = DSPASURF;
u32 mipi_reg = MIPI;
u32 dspcntr_reg = DSPACNTR;
u32 dspstatus_reg = PIPEASTAT;
u32 palette_reg = PALETTE_A;
/* pointer to values */
u32 *dpll_val = &regs->saveDPLL_A;
u32 *fp_val = &regs->saveFPA0;
u32 *pipeconf_val = &regs->savePIPEACONF;
u32 *htot_val = &regs->saveHTOTAL_A;
u32 *hblank_val = &regs->saveHBLANK_A;
u32 *hsync_val = &regs->saveHSYNC_A;
u32 *vtot_val = &regs->saveVTOTAL_A;
u32 *vblank_val = &regs->saveVBLANK_A;
u32 *vsync_val = &regs->saveVSYNC_A;
u32 *pipesrc_val = &regs->savePIPEASRC;
u32 *dspstride_val = &regs->saveDSPASTRIDE;
u32 *dsplinoff_val = &regs->saveDSPALINOFF;
u32 *dsptileoff_val = &regs->saveDSPATILEOFF;
u32 *dspsize_val = &regs->saveDSPASIZE;
u32 *dsppos_val = &regs->saveDSPAPOS;
u32 *dspsurf_val = &regs->saveDSPASURF;
u32 *mipi_val = &regs->saveMIPI;
u32 *dspcntr_val = &regs->saveDSPACNTR;
u32 *dspstatus_val = &regs->saveDSPASTATUS;
u32 *palette_val = regs->save_palette_a;
switch (pipe) {
case 0:
break;
case 1:
/* regester */
dpll_reg = MDFLD_DPLL_B;
fp_reg = MDFLD_DPLL_DIV0;
pipeconf_reg = PIPEBCONF;
htot_reg = HTOTAL_B;
hblank_reg = HBLANK_B;
hsync_reg = HSYNC_B;
vtot_reg = VTOTAL_B;
vblank_reg = VBLANK_B;
vsync_reg = VSYNC_B;
pipesrc_reg = PIPEBSRC;
dspstride_reg = DSPBSTRIDE;
dsplinoff_reg = DSPBLINOFF;
dsptileoff_reg = DSPBTILEOFF;
dspsize_reg = DSPBSIZE;
dsppos_reg = DSPBPOS;
dspsurf_reg = DSPBSURF;
dspcntr_reg = DSPBCNTR;
dspstatus_reg = PIPEBSTAT;
palette_reg = PALETTE_B;
/* values */
dpll_val = &regs->saveDPLL_B;
fp_val = &regs->saveFPB0;
pipeconf_val = &regs->savePIPEBCONF;
htot_val = &regs->saveHTOTAL_B;
hblank_val = &regs->saveHBLANK_B;
hsync_val = &regs->saveHSYNC_B;
vtot_val = &regs->saveVTOTAL_B;
vblank_val = &regs->saveVBLANK_B;
vsync_val = &regs->saveVSYNC_B;
pipesrc_val = &regs->savePIPEBSRC;
dspstride_val = &regs->saveDSPBSTRIDE;
dsplinoff_val = &regs->saveDSPBLINOFF;
dsptileoff_val = &regs->saveDSPBTILEOFF;
dspsize_val = &regs->saveDSPBSIZE;
dsppos_val = &regs->saveDSPBPOS;
dspsurf_val = &regs->saveDSPBSURF;
dspcntr_val = &regs->saveDSPBCNTR;
dspstatus_val = &regs->saveDSPBSTATUS;
palette_val = regs->save_palette_b;
break;
case 2:
/* register */
pipeconf_reg = PIPECCONF;
htot_reg = HTOTAL_C;
hblank_reg = HBLANK_C;
hsync_reg = HSYNC_C;
vtot_reg = VTOTAL_C;
vblank_reg = VBLANK_C;
vsync_reg = VSYNC_C;
pipesrc_reg = PIPECSRC;
dspstride_reg = DSPCSTRIDE;
dsplinoff_reg = DSPCLINOFF;
dsptileoff_reg = DSPCTILEOFF;
dspsize_reg = DSPCSIZE;
dsppos_reg = DSPCPOS;
dspsurf_reg = DSPCSURF;
mipi_reg = MIPI_C;
dspcntr_reg = DSPCCNTR;
dspstatus_reg = PIPECSTAT;
palette_reg = PALETTE_C;
/* pointer to values */
pipeconf_val = &regs->savePIPECCONF;
htot_val = &regs->saveHTOTAL_C;
hblank_val = &regs->saveHBLANK_C;
hsync_val = &regs->saveHSYNC_C;
vtot_val = &regs->saveVTOTAL_C;
vblank_val = &regs->saveVBLANK_C;
vsync_val = &regs->saveVSYNC_C;
pipesrc_val = &regs->savePIPECSRC;
dspstride_val = &regs->saveDSPCSTRIDE;
dsplinoff_val = &regs->saveDSPCLINOFF;
dsptileoff_val = &regs->saveDSPCTILEOFF;
dspsize_val = &regs->saveDSPCSIZE;
dsppos_val = &regs->saveDSPCPOS;
dspsurf_val = &regs->saveDSPCSURF;
mipi_val = &regs->saveMIPI_C;
dspcntr_val = &regs->saveDSPCCNTR;
dspstatus_val = &regs->saveDSPCSTATUS;
palette_val = regs->save_palette_c;
break;
default:
DRM_ERROR("%s, invalid pipe number.\n", __func__);
return -EINVAL;
}
/* Pipe & plane A info */
*dpll_val = PSB_RVDC32(dpll_reg);
*fp_val = PSB_RVDC32(fp_reg);
*pipeconf_val = PSB_RVDC32(pipeconf_reg);
*htot_val = PSB_RVDC32(htot_reg);
*hblank_val = PSB_RVDC32(hblank_reg);
*hsync_val = PSB_RVDC32(hsync_reg);
*vtot_val = PSB_RVDC32(vtot_reg);
*vblank_val = PSB_RVDC32(vblank_reg);
*vsync_val = PSB_RVDC32(vsync_reg);
*pipesrc_val = PSB_RVDC32(pipesrc_reg);
*dspstride_val = PSB_RVDC32(dspstride_reg);
*dsplinoff_val = PSB_RVDC32(dsplinoff_reg);
*dsptileoff_val = PSB_RVDC32(dsptileoff_reg);
*dspsize_val = PSB_RVDC32(dspsize_reg);
*dsppos_val = PSB_RVDC32(dsppos_reg);
*dspsurf_val = PSB_RVDC32(dspsurf_reg);
*dspcntr_val = PSB_RVDC32(dspcntr_reg);
*dspstatus_val = PSB_RVDC32(dspstatus_reg);
/*save palette (gamma) */
for (i = 0; i < 256; i++)
palette_val[i] = PSB_RVDC32(palette_reg + (i << 2));
if (pipe == 1) {
regs->savePFIT_CONTROL = PSB_RVDC32(PFIT_CONTROL);
regs->savePFIT_PGM_RATIOS = PSB_RVDC32(PFIT_PGM_RATIOS);
regs->saveHDMIPHYMISCCTL = PSB_RVDC32(HDMIPHYMISCCTL);
regs->saveHDMIB_CONTROL = PSB_RVDC32(HDMIB_CONTROL);
return 0;
}
*mipi_val = PSB_RVDC32(mipi_reg);
return 0;
}
/*
* mdfld_restore_display_registers
*
* Description: We are going to resume so restore display register state.
*
* Notes: FIXME_JLIU7 need to add the support for DPI MIPI & HDMI audio
*/
static int mdfld_restore_display_registers(struct drm_device *dev, int pipe)
{
/* To get panel out of ULPS mode. */
u32 temp = 0;
u32 device_ready_reg = DEVICE_READY_REG;
struct drm_psb_private *dev_priv = dev->dev_private;
struct mdfld_dsi_config *dsi_config = NULL;
struct medfield_state *regs = &dev_priv->regs.mdfld;
u32 i = 0;
u32 dpll = 0;
u32 timeout = 0;
/* regester */
u32 dpll_reg = MRST_DPLL_A;
u32 fp_reg = MRST_FPA0;
u32 pipeconf_reg = PIPEACONF;
u32 htot_reg = HTOTAL_A;
u32 hblank_reg = HBLANK_A;
u32 hsync_reg = HSYNC_A;
u32 vtot_reg = VTOTAL_A;
u32 vblank_reg = VBLANK_A;
u32 vsync_reg = VSYNC_A;
u32 pipesrc_reg = PIPEASRC;
u32 dspstride_reg = DSPASTRIDE;
u32 dsplinoff_reg = DSPALINOFF;
u32 dsptileoff_reg = DSPATILEOFF;
u32 dspsize_reg = DSPASIZE;
u32 dsppos_reg = DSPAPOS;
u32 dspsurf_reg = DSPASURF;
u32 dspstatus_reg = PIPEASTAT;
u32 mipi_reg = MIPI;
u32 dspcntr_reg = DSPACNTR;
u32 palette_reg = PALETTE_A;
/* values */
u32 dpll_val = regs->saveDPLL_A & ~DPLL_VCO_ENABLE;
u32 fp_val = regs->saveFPA0;
u32 pipeconf_val = regs->savePIPEACONF;
u32 htot_val = regs->saveHTOTAL_A;
u32 hblank_val = regs->saveHBLANK_A;
u32 hsync_val = regs->saveHSYNC_A;
u32 vtot_val = regs->saveVTOTAL_A;
u32 vblank_val = regs->saveVBLANK_A;
u32 vsync_val = regs->saveVSYNC_A;
u32 pipesrc_val = regs->savePIPEASRC;
u32 dspstride_val = regs->saveDSPASTRIDE;
u32 dsplinoff_val = regs->saveDSPALINOFF;
u32 dsptileoff_val = regs->saveDSPATILEOFF;
u32 dspsize_val = regs->saveDSPASIZE;
u32 dsppos_val = regs->saveDSPAPOS;
u32 dspsurf_val = regs->saveDSPASURF;
u32 dspstatus_val = regs->saveDSPASTATUS;
u32 mipi_val = regs->saveMIPI;
u32 dspcntr_val = regs->saveDSPACNTR;
u32 *palette_val = regs->save_palette_a;
switch (pipe) {
case 0:
dsi_config = dev_priv->dsi_configs[0];
break;
case 1:
/* regester */
dpll_reg = MDFLD_DPLL_B;
fp_reg = MDFLD_DPLL_DIV0;
pipeconf_reg = PIPEBCONF;
htot_reg = HTOTAL_B;
hblank_reg = HBLANK_B;
hsync_reg = HSYNC_B;
vtot_reg = VTOTAL_B;
vblank_reg = VBLANK_B;
vsync_reg = VSYNC_B;
pipesrc_reg = PIPEBSRC;
dspstride_reg = DSPBSTRIDE;
dsplinoff_reg = DSPBLINOFF;
dsptileoff_reg = DSPBTILEOFF;
dspsize_reg = DSPBSIZE;
dsppos_reg = DSPBPOS;
dspsurf_reg = DSPBSURF;
dspcntr_reg = DSPBCNTR;
dspstatus_reg = PIPEBSTAT;
palette_reg = PALETTE_B;
/* values */
dpll_val = regs->saveDPLL_B & ~DPLL_VCO_ENABLE;
fp_val = regs->saveFPB0;
pipeconf_val = regs->savePIPEBCONF;
htot_val = regs->saveHTOTAL_B;
hblank_val = regs->saveHBLANK_B;
hsync_val = regs->saveHSYNC_B;
vtot_val = regs->saveVTOTAL_B;
vblank_val = regs->saveVBLANK_B;
vsync_val = regs->saveVSYNC_B;
pipesrc_val = regs->savePIPEBSRC;
dspstride_val = regs->saveDSPBSTRIDE;
dsplinoff_val = regs->saveDSPBLINOFF;
dsptileoff_val = regs->saveDSPBTILEOFF;
dspsize_val = regs->saveDSPBSIZE;
dsppos_val = regs->saveDSPBPOS;
dspsurf_val = regs->saveDSPBSURF;
dspcntr_val = regs->saveDSPBCNTR;
dspstatus_val = regs->saveDSPBSTATUS;
palette_val = regs->save_palette_b;
break;
case 2:
/* regester */
pipeconf_reg = PIPECCONF;
htot_reg = HTOTAL_C;
hblank_reg = HBLANK_C;
hsync_reg = HSYNC_C;
vtot_reg = VTOTAL_C;
vblank_reg = VBLANK_C;
vsync_reg = VSYNC_C;
pipesrc_reg = PIPECSRC;
dspstride_reg = DSPCSTRIDE;
dsplinoff_reg = DSPCLINOFF;
dsptileoff_reg = DSPCTILEOFF;
dspsize_reg = DSPCSIZE;
dsppos_reg = DSPCPOS;
dspsurf_reg = DSPCSURF;
mipi_reg = MIPI_C;
dspcntr_reg = DSPCCNTR;
dspstatus_reg = PIPECSTAT;
palette_reg = PALETTE_C;
/* values */
pipeconf_val = regs->savePIPECCONF;
htot_val = regs->saveHTOTAL_C;
hblank_val = regs->saveHBLANK_C;
hsync_val = regs->saveHSYNC_C;
vtot_val = regs->saveVTOTAL_C;
vblank_val = regs->saveVBLANK_C;
vsync_val = regs->saveVSYNC_C;
pipesrc_val = regs->savePIPECSRC;
dspstride_val = regs->saveDSPCSTRIDE;
dsplinoff_val = regs->saveDSPCLINOFF;
dsptileoff_val = regs->saveDSPCTILEOFF;
dspsize_val = regs->saveDSPCSIZE;
dsppos_val = regs->saveDSPCPOS;
dspsurf_val = regs->saveDSPCSURF;
mipi_val = regs->saveMIPI_C;
dspcntr_val = regs->saveDSPCCNTR;
dspstatus_val = regs->saveDSPCSTATUS;
palette_val = regs->save_palette_c;
dsi_config = dev_priv->dsi_configs[1];
break;
default:
DRM_ERROR("%s, invalid pipe number.\n", __func__);
return -EINVAL;
}
/*make sure VGA plane is off. it initializes to on after reset!*/
PSB_WVDC32(0x80000000, VGACNTRL);
if (pipe == 1) {
PSB_WVDC32(dpll_val & ~DPLL_VCO_ENABLE, dpll_reg);
PSB_RVDC32(dpll_reg);
PSB_WVDC32(fp_val, fp_reg);
} else {
dpll = PSB_RVDC32(dpll_reg);
if (!(dpll & DPLL_VCO_ENABLE)) {
/* When ungating power of DPLL, needs to wait 0.5us
before enable the VCO */
if (dpll & MDFLD_PWR_GATE_EN) {
dpll &= ~MDFLD_PWR_GATE_EN;
PSB_WVDC32(dpll, dpll_reg);
/* FIXME_MDFLD PO - change 500 to 1 after PO */
udelay(500);
}
PSB_WVDC32(fp_val, fp_reg);
PSB_WVDC32(dpll_val, dpll_reg);
/* FIXME_MDFLD PO - change 500 to 1 after PO */
udelay(500);
dpll_val |= DPLL_VCO_ENABLE;
PSB_WVDC32(dpll_val, dpll_reg);
PSB_RVDC32(dpll_reg);
/* wait for DSI PLL to lock */
while (timeout < 20000 &&
!(PSB_RVDC32(pipeconf_reg) & PIPECONF_DSIPLL_LOCK)) {
udelay(150);
timeout++;
}
if (timeout == 20000) {
DRM_ERROR("%s, can't lock DSIPLL.\n",
__func__);
return -EINVAL;
}
}
}
/* Restore mode */
PSB_WVDC32(htot_val, htot_reg);
PSB_WVDC32(hblank_val, hblank_reg);
PSB_WVDC32(hsync_val, hsync_reg);
PSB_WVDC32(vtot_val, vtot_reg);
PSB_WVDC32(vblank_val, vblank_reg);
PSB_WVDC32(vsync_val, vsync_reg);
PSB_WVDC32(pipesrc_val, pipesrc_reg);
PSB_WVDC32(dspstatus_val, dspstatus_reg);
/*set up the plane*/
PSB_WVDC32(dspstride_val, dspstride_reg);
PSB_WVDC32(dsplinoff_val, dsplinoff_reg);
PSB_WVDC32(dsptileoff_val, dsptileoff_reg);
PSB_WVDC32(dspsize_val, dspsize_reg);
PSB_WVDC32(dsppos_val, dsppos_reg);
PSB_WVDC32(dspsurf_val, dspsurf_reg);
if (pipe == 1) {
/* restore palette (gamma) */
/*DRM_UDELAY(50000); */
for (i = 0; i < 256; i++)
PSB_WVDC32(palette_val[i], palette_reg + (i << 2));
PSB_WVDC32(regs->savePFIT_CONTROL, PFIT_CONTROL);
PSB_WVDC32(regs->savePFIT_PGM_RATIOS, PFIT_PGM_RATIOS);
/*TODO: resume HDMI port */
/*TODO: resume pipe*/
/*enable the plane*/
PSB_WVDC32(dspcntr_val & ~DISPLAY_PLANE_ENABLE, dspcntr_reg);
return 0;
}
/*set up pipe related registers*/
PSB_WVDC32(mipi_val, mipi_reg);
/*setup MIPI adapter + MIPI IP registers*/
if (dsi_config)
mdfld_dsi_controller_init(dsi_config, pipe);
if (in_atomic() || in_interrupt())
mdelay(20);
else
msleep(20);
/*enable the plane*/
PSB_WVDC32(dspcntr_val, dspcntr_reg);
if (in_atomic() || in_interrupt())
mdelay(20);
else
msleep(20);
/* LP Hold Release */
temp = REG_READ(mipi_reg);
temp |= LP_OUTPUT_HOLD_RELEASE;
REG_WRITE(mipi_reg, temp);
mdelay(1);
/* Set DSI host to exit from Utra Low Power State */
temp = REG_READ(device_ready_reg);
temp &= ~ULPS_MASK;
temp |= 0x3;
temp |= EXIT_ULPS_DEV_READY;
REG_WRITE(device_ready_reg, temp);
mdelay(1);
temp = REG_READ(device_ready_reg);
temp &= ~ULPS_MASK;
temp |= EXITING_ULPS;
REG_WRITE(device_ready_reg, temp);
mdelay(1);
/*enable the pipe*/
PSB_WVDC32(pipeconf_val, pipeconf_reg);
/* restore palette (gamma) */
/*DRM_UDELAY(50000); */
for (i = 0; i < 256; i++)
PSB_WVDC32(palette_val[i], palette_reg + (i << 2));
return 0;
}
static int mdfld_save_registers(struct drm_device *dev)
{
/* mdfld_save_cursor_overlay_registers(dev); */
mdfld_save_display_registers(dev, 0);
mdfld_save_display_registers(dev, 2);
mdfld_disable_crtc(dev, 0);
mdfld_disable_crtc(dev, 2);
return 0;
}
static int mdfld_restore_registers(struct drm_device *dev)
{
mdfld_restore_display_registers(dev, 2);
mdfld_restore_display_registers(dev, 0);
/* mdfld_restore_cursor_overlay_registers(dev); */
return 0;
}
static int mdfld_power_down(struct drm_device *dev)
{
/* FIXME */
return 0;
}
static int mdfld_power_up(struct drm_device *dev)
{
/* FIXME */
return 0;
}
const struct psb_ops mdfld_chip_ops = {
.name = "mdfld",
.accel_2d = 0,
.pipes = 3,
.crtcs = 3,
.sgx_offset = MRST_SGX_OFFSET,
.chip_setup = mid_chip_setup,
.crtc_helper = &mdfld_helper_funcs,
.crtc_funcs = &psb_intel_crtc_funcs,
.output_init = mdfld_output_init,
#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
.backlight_init = mdfld_backlight_init,
#endif
.save_regs = mdfld_save_registers,
.restore_regs = mdfld_restore_registers,
.power_down = mdfld_power_down,
.power_up = mdfld_power_up,
};
Reference in New Issue View Git Blame Copy Permalink