forked from Minki/linux
b8e64eea41
This driver register pm_power_off with snvs power off function. If your boards NOT use PMIC_ON_REQ to turn on/off external pmic, or use other pin to do, please disable the driver in dts, otherwise, your pm_power_off maybe overwrote by this driver. Signed-off-by: Robin Gong <b38343@freescale.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
24 lines
657 B
Plaintext
24 lines
657 B
Plaintext
i.mx6 Poweroff Driver
|
|
|
|
SNVS_LPCR in SNVS module can power off the whole system by pull
|
|
PMIC_ON_REQ low if PMIC_ON_REQ is connected with external PMIC.
|
|
If you don't want to use PMIC_ON_REQ as power on/off control,
|
|
please set status='disabled' to disable this driver.
|
|
|
|
Required Properties:
|
|
-compatible: "fsl,sec-v4.0-poweroff"
|
|
-reg: Specifies the physical address of the SNVS_LPCR register
|
|
|
|
Example:
|
|
snvs@020cc000 {
|
|
compatible = "fsl,sec-v4.0-mon", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x020cc000 0x4000>;
|
|
.....
|
|
snvs_poweroff: snvs-poweroff@38 {
|
|
compatible = "fsl,sec-v4.0-poweroff";
|
|
reg = <0x38 0x4>;
|
|
};
|
|
}
|