linux/drivers/tty/serial
Krzysztof Kozlowski f98c7bce57 serial: samsung: Continue to work if DMA request fails
If DMA is not available (even when configured in DeviceTree), the driver
will fail the startup procedure thus making serial console not
available.

For example this causes boot failure on QEMU ARMv7 (Exynos4210, SMDKC210):
    [    1.302575] OF: amba_device_add() failed (-19) for /amba/pdma@12680000
    ...
    [   11.435732] samsung-uart 13800000.serial: DMA request failed
    [   72.963893] samsung-uart 13800000.serial: DMA request failed
    [   73.143361] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000

DMA is not necessary for serial to work, so continue with UART startup
after emitting a warning.

Fixes: 62c37eedb7 ("serial: samsung: add dma reqest/release functions")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07 19:58:37 +01:00
..
8250 serial: exar: Enable MSI support 2017-02-10 15:13:26 +01:00
cpm_uart tty: serial: cpm_uart: make use of for_each_node_by_type() 2017-02-03 10:12:16 +01:00
jsm tty: serial: jsm_tty: constify uart_ops structures 2016-09-02 15:01:16 +02:00
21285.c
altera_jtaguart.c serial: altera: constify uart_ops structures 2016-09-02 15:01:16 +02:00
altera_uart.c serial: altera: constify uart_ops structures 2016-09-02 15:01:16 +02:00
amba-pl010.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
amba-pl011.c tty: pl011: Work around QDF2400 E44 stuck BUSY bit 2017-02-15 14:46:43 -08:00
amba-pl011.h
apbuart.c
apbuart.h
ar933x_uart.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
arc_uart.c serial/arc: constify uart_ops structures 2016-09-01 21:05:41 +02:00
atmel_serial.c atmel_serial: Use the fractional divider when possible 2017-02-14 10:12:21 -08:00
bcm63xx_uart.c serial/bcm63xx_uart: constify uart_ops structures 2016-09-02 15:01:16 +02:00
bfin_sport_uart.c tty: serial: constify dev_pm_ops structures 2017-01-19 14:20:23 +01:00
bfin_sport_uart.h
bfin_uart.c
clps711x.c serial: clps711x: Changing the compatibility string to match with the smallest supported chip 2016-07-06 17:38:16 +02:00
crisv10.c sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h> 2017-03-02 08:42:32 +01:00
crisv10.h
digicolor-usart.c tty/serial: digicolor: Fix bad usage of IS_ERR_VALUE 2016-02-14 17:39:36 -08:00
dz.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
dz.h
earlycon-arm-semihost.c tty/serial: mark __init early_smh_setup() static 2016-09-02 15:03:35 +02:00
earlycon.c ACPI: parse SPCR and enable matching console 2016-09-28 17:46:46 +02:00
efm32-uart.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
etraxfs-uart.c
fsl_lpuart.c tty: serial: fsl_lpuart: fix del_timer_sync() vs timer routine deadlock 2017-01-12 11:51:24 +01:00
icom.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
icom.h
ifx6x60.c serial: ifx6x60: Free memory when probe fails 2016-11-10 14:50:46 +01:00
ifx6x60.h
imx.c serial: imx: Fix the CTS_B polarity in RS485 mode 2017-01-31 10:54:58 +01:00
ioc3_serial.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
ioc4_serial.c scripts/spelling.txt: add "comsume(r)" pattern and fix typo instances 2017-02-27 18:43:47 -08:00
ip22zilog.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
ip22zilog.h
Kconfig tty: serial: lantiq: implement earlycon support 2017-01-12 11:51:24 +01:00
kgdb_nmi.c
kgdboc.c
lantiq.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
lpc32xx_hs.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
m32r_sio_reg.h
m32r_sio.c serial: m32r_sio: make it explicitly non-modular 2016-06-25 14:00:06 -07:00
Makefile tty: serial: Makefile: move kgdb to be initialized last 2016-10-27 16:27:24 +02:00
max310x.c serial: max310x: Add support for newer silicon revisions 2017-01-12 11:51:24 +01:00
max3100.c tty: serial: constify uart_ops structures 2016-09-02 15:01:16 +02:00
mcf.c
men_z135_uart.c tty: serial: constify uart_ops structures 2016-09-02 15:01:16 +02:00
meson_uart.c tty: serial: meson: allow baud-rates higher than 115200 2017-01-19 14:38:57 +01:00
mpc52xx_uart.c
mps2-uart.c serial: mps2-uart: make driver explicitly non-modular 2016-06-25 14:01:57 -07:00
mpsc.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
msm_serial.c tty: serial: msm: Fix module autoload 2017-01-12 11:51:25 +01:00
mux.c
mvebu-uart.c serial: mvebu-uart: free the IRQ in ->shutdown() 2016-06-25 14:00:06 -07:00
mxs-auart.c serial: mxs-auart: support CMSPAR termios cflag 2017-01-12 11:51:24 +01:00
netx-serial.c
omap-serial.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
pch_uart.c serial: pch_uart: add terminate entry for dmi_system_id tables 2016-10-27 16:01:31 +02:00
pic32_uart.c serial: pic32_uart: Fix 'request_irq' and 'free_irq' inconsistancy 2017-01-12 11:51:24 +01:00
pic32_uart.h serial: pic32_uart: Add PIC32 UART driver 2016-05-13 14:01:56 +02:00
pmac_zilog.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
pmac_zilog.h
pnx8xxx_uart.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
pxa.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
rp2.c
sa1100.c
samsung.c serial: samsung: Continue to work if DMA request fails 2017-03-07 19:58:37 +01:00
samsung.h serial: samsung: Simplify DMA engine initialization code 2017-01-12 11:51:24 +01:00
sb1250-duart.c
sc16is7xx.c sched/headers: Prepare for new header dependencies before moving code to <uapi/linux/sched/types.h> 2017-03-02 08:42:27 +01:00
sccnxp.c
serial_core.c sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h> 2017-03-02 08:42:32 +01:00
serial_ks8695.c
serial_mctrl_gpio.c serial: mctrl_gpio: enable API usage only for initialized mctrl_gpios struct 2016-06-25 14:30:42 -07:00
serial_mctrl_gpio.h serial: mctrl_gpio: add modem control read routine 2016-06-25 14:30:42 -07:00
serial_txx9.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
serial-tegra.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
sh-sci.c serial: sh-sci: fix hardware RX trigger level setting 2017-02-10 15:10:16 +01:00
sh-sci.h serial: sh-sci: consider DR (data ready) bit adequately 2017-02-03 10:14:10 +01:00
sirfsoc_uart.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
sirfsoc_uart.h serial: sirf: make fifo functions static 2016-06-25 14:01:57 -07:00
sn_console.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
sprd_serial.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
st-asc.c serial: st-asc: Use generic DT binding for announcing RTS/CTS lines 2017-02-06 09:47:52 +01:00
stm32-usart.c serial: stm32: mark symbols static where possible 2016-09-27 12:55:27 +02:00
stm32-usart.h serial: stm32: Fix comparisons with undefined register 2016-10-27 16:00:31 +02:00
suncore.c
sunhv.c sparc64: Send break twice from console to return to boot prom 2017-02-23 08:27:24 -08:00
sunsab.c
sunsab.h
sunsu.c serial: sunsu: Free memory when probe fails 2016-11-16 10:57:26 +01:00
sunzilog.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
sunzilog.h
tilegx.c
timbuart.c tty: serial: constify uart_ops structures 2016-09-02 15:01:16 +02:00
timbuart.h
uartlite.c serial-uartlite: constify uart_ops structures 2016-09-02 15:01:16 +02:00
ucc_uart.c QE-UART: add "fsl,t1040-ucc-uart" to of_device_id 2016-05-01 13:55:12 -07:00
vr41xx_siu.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
vt8500_serial.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
xilinx_uartps.c serial: xuartps: Enable uart loopback mode 2017-01-25 11:08:30 +01:00
zs.c tty: serial: constify uart_ops structures 2017-01-27 09:23:36 +01:00
zs.h