forked from Minki/linux
a24015fa8b
The i.MX SCU soc driver depends on SCU firmware driver, so it has to use platform driver model for proper defer probe operation, since it has no device binding in DT file, a simple platform device is created together inside the platform driver. To make it more clean, we can just move the entire SCU soc driver into imx firmware folder and initialized by i.MX SCU firmware driver. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
362 lines
8.8 KiB
C
362 lines
8.8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2018 NXP
|
|
* Author: Dong Aisheng <aisheng.dong@nxp.com>
|
|
*
|
|
* Implementation of the SCU IPC functions using MUs (client side).
|
|
*
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/firmware/imx/ipc.h>
|
|
#include <linux/firmware/imx/sci.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mailbox_client.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#define SCU_MU_CHAN_NUM 8
|
|
#define MAX_RX_TIMEOUT (msecs_to_jiffies(30))
|
|
|
|
struct imx_sc_chan {
|
|
struct imx_sc_ipc *sc_ipc;
|
|
|
|
struct mbox_client cl;
|
|
struct mbox_chan *ch;
|
|
int idx;
|
|
struct completion tx_done;
|
|
};
|
|
|
|
struct imx_sc_ipc {
|
|
/* SCU uses 4 Tx and 4 Rx channels */
|
|
struct imx_sc_chan chans[SCU_MU_CHAN_NUM];
|
|
struct device *dev;
|
|
struct mutex lock;
|
|
struct completion done;
|
|
bool fast_ipc;
|
|
|
|
/* temporarily store the SCU msg */
|
|
u32 *msg;
|
|
u8 rx_size;
|
|
u8 count;
|
|
};
|
|
|
|
/*
|
|
* This type is used to indicate error response for most functions.
|
|
*/
|
|
enum imx_sc_error_codes {
|
|
IMX_SC_ERR_NONE = 0, /* Success */
|
|
IMX_SC_ERR_VERSION = 1, /* Incompatible API version */
|
|
IMX_SC_ERR_CONFIG = 2, /* Configuration error */
|
|
IMX_SC_ERR_PARM = 3, /* Bad parameter */
|
|
IMX_SC_ERR_NOACCESS = 4, /* Permission error (no access) */
|
|
IMX_SC_ERR_LOCKED = 5, /* Permission error (locked) */
|
|
IMX_SC_ERR_UNAVAILABLE = 6, /* Unavailable (out of resources) */
|
|
IMX_SC_ERR_NOTFOUND = 7, /* Not found */
|
|
IMX_SC_ERR_NOPOWER = 8, /* No power */
|
|
IMX_SC_ERR_IPC = 9, /* Generic IPC error */
|
|
IMX_SC_ERR_BUSY = 10, /* Resource is currently busy/active */
|
|
IMX_SC_ERR_FAIL = 11, /* General I/O failure */
|
|
IMX_SC_ERR_LAST
|
|
};
|
|
|
|
static int imx_sc_linux_errmap[IMX_SC_ERR_LAST] = {
|
|
0, /* IMX_SC_ERR_NONE */
|
|
-EINVAL, /* IMX_SC_ERR_VERSION */
|
|
-EINVAL, /* IMX_SC_ERR_CONFIG */
|
|
-EINVAL, /* IMX_SC_ERR_PARM */
|
|
-EACCES, /* IMX_SC_ERR_NOACCESS */
|
|
-EACCES, /* IMX_SC_ERR_LOCKED */
|
|
-ERANGE, /* IMX_SC_ERR_UNAVAILABLE */
|
|
-EEXIST, /* IMX_SC_ERR_NOTFOUND */
|
|
-EPERM, /* IMX_SC_ERR_NOPOWER */
|
|
-EPIPE, /* IMX_SC_ERR_IPC */
|
|
-EBUSY, /* IMX_SC_ERR_BUSY */
|
|
-EIO, /* IMX_SC_ERR_FAIL */
|
|
};
|
|
|
|
static struct imx_sc_ipc *imx_sc_ipc_handle;
|
|
|
|
static inline int imx_sc_to_linux_errno(int errno)
|
|
{
|
|
if (errno >= IMX_SC_ERR_NONE && errno < IMX_SC_ERR_LAST)
|
|
return imx_sc_linux_errmap[errno];
|
|
return -EIO;
|
|
}
|
|
|
|
/*
|
|
* Get the default handle used by SCU
|
|
*/
|
|
int imx_scu_get_handle(struct imx_sc_ipc **ipc)
|
|
{
|
|
if (!imx_sc_ipc_handle)
|
|
return -EPROBE_DEFER;
|
|
|
|
*ipc = imx_sc_ipc_handle;
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(imx_scu_get_handle);
|
|
|
|
/* Callback called when the word of a message is ack-ed, eg read by SCU */
|
|
static void imx_scu_tx_done(struct mbox_client *cl, void *mssg, int r)
|
|
{
|
|
struct imx_sc_chan *sc_chan = container_of(cl, struct imx_sc_chan, cl);
|
|
|
|
complete(&sc_chan->tx_done);
|
|
}
|
|
|
|
static void imx_scu_rx_callback(struct mbox_client *c, void *msg)
|
|
{
|
|
struct imx_sc_chan *sc_chan = container_of(c, struct imx_sc_chan, cl);
|
|
struct imx_sc_ipc *sc_ipc = sc_chan->sc_ipc;
|
|
struct imx_sc_rpc_msg *hdr;
|
|
u32 *data = msg;
|
|
int i;
|
|
|
|
if (!sc_ipc->msg) {
|
|
dev_warn(sc_ipc->dev, "unexpected rx idx %d 0x%08x, ignore!\n",
|
|
sc_chan->idx, *data);
|
|
return;
|
|
}
|
|
|
|
if (sc_ipc->fast_ipc) {
|
|
hdr = msg;
|
|
sc_ipc->rx_size = hdr->size;
|
|
sc_ipc->msg[0] = *data++;
|
|
|
|
for (i = 1; i < sc_ipc->rx_size; i++)
|
|
sc_ipc->msg[i] = *data++;
|
|
|
|
complete(&sc_ipc->done);
|
|
|
|
return;
|
|
}
|
|
|
|
if (sc_chan->idx == 0) {
|
|
hdr = msg;
|
|
sc_ipc->rx_size = hdr->size;
|
|
dev_dbg(sc_ipc->dev, "msg rx size %u\n", sc_ipc->rx_size);
|
|
if (sc_ipc->rx_size > 4)
|
|
dev_warn(sc_ipc->dev, "RPC does not support receiving over 4 words: %u\n",
|
|
sc_ipc->rx_size);
|
|
}
|
|
|
|
sc_ipc->msg[sc_chan->idx] = *data;
|
|
sc_ipc->count++;
|
|
|
|
dev_dbg(sc_ipc->dev, "mu %u msg %u 0x%x\n", sc_chan->idx,
|
|
sc_ipc->count, *data);
|
|
|
|
if ((sc_ipc->rx_size != 0) && (sc_ipc->count == sc_ipc->rx_size))
|
|
complete(&sc_ipc->done);
|
|
}
|
|
|
|
static int imx_scu_ipc_write(struct imx_sc_ipc *sc_ipc, void *msg)
|
|
{
|
|
struct imx_sc_rpc_msg hdr = *(struct imx_sc_rpc_msg *)msg;
|
|
struct imx_sc_chan *sc_chan;
|
|
u32 *data = msg;
|
|
int ret;
|
|
int size;
|
|
int i;
|
|
|
|
/* Check size */
|
|
if (hdr.size > IMX_SC_RPC_MAX_MSG)
|
|
return -EINVAL;
|
|
|
|
dev_dbg(sc_ipc->dev, "RPC SVC %u FUNC %u SIZE %u\n", hdr.svc,
|
|
hdr.func, hdr.size);
|
|
|
|
size = sc_ipc->fast_ipc ? 1 : hdr.size;
|
|
for (i = 0; i < size; i++) {
|
|
sc_chan = &sc_ipc->chans[i % 4];
|
|
|
|
/*
|
|
* SCU requires that all messages words are written
|
|
* sequentially but linux MU driver implements multiple
|
|
* independent channels for each register so ordering between
|
|
* different channels must be ensured by SCU API interface.
|
|
*
|
|
* Wait for tx_done before every send to ensure that no
|
|
* queueing happens at the mailbox channel level.
|
|
*/
|
|
if (!sc_ipc->fast_ipc) {
|
|
wait_for_completion(&sc_chan->tx_done);
|
|
reinit_completion(&sc_chan->tx_done);
|
|
}
|
|
|
|
ret = mbox_send_message(sc_chan->ch, &data[i]);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* RPC command/response
|
|
*/
|
|
int imx_scu_call_rpc(struct imx_sc_ipc *sc_ipc, void *msg, bool have_resp)
|
|
{
|
|
uint8_t saved_svc, saved_func;
|
|
struct imx_sc_rpc_msg *hdr;
|
|
int ret;
|
|
|
|
if (WARN_ON(!sc_ipc || !msg))
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&sc_ipc->lock);
|
|
reinit_completion(&sc_ipc->done);
|
|
|
|
if (have_resp) {
|
|
sc_ipc->msg = msg;
|
|
saved_svc = ((struct imx_sc_rpc_msg *)msg)->svc;
|
|
saved_func = ((struct imx_sc_rpc_msg *)msg)->func;
|
|
}
|
|
sc_ipc->count = 0;
|
|
ret = imx_scu_ipc_write(sc_ipc, msg);
|
|
if (ret < 0) {
|
|
dev_err(sc_ipc->dev, "RPC send msg failed: %d\n", ret);
|
|
goto out;
|
|
}
|
|
|
|
if (have_resp) {
|
|
if (!wait_for_completion_timeout(&sc_ipc->done,
|
|
MAX_RX_TIMEOUT)) {
|
|
dev_err(sc_ipc->dev, "RPC send msg timeout\n");
|
|
mutex_unlock(&sc_ipc->lock);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/* response status is stored in hdr->func field */
|
|
hdr = msg;
|
|
ret = hdr->func;
|
|
/*
|
|
* Some special SCU firmware APIs do NOT have return value
|
|
* in hdr->func, but they do have response data, those special
|
|
* APIs are defined as void function in SCU firmware, so they
|
|
* should be treated as return success always.
|
|
*/
|
|
if ((saved_svc == IMX_SC_RPC_SVC_MISC) &&
|
|
(saved_func == IMX_SC_MISC_FUNC_UNIQUE_ID ||
|
|
saved_func == IMX_SC_MISC_FUNC_GET_BUTTON_STATUS))
|
|
ret = 0;
|
|
}
|
|
|
|
out:
|
|
sc_ipc->msg = NULL;
|
|
mutex_unlock(&sc_ipc->lock);
|
|
|
|
dev_dbg(sc_ipc->dev, "RPC SVC done\n");
|
|
|
|
return imx_sc_to_linux_errno(ret);
|
|
}
|
|
EXPORT_SYMBOL(imx_scu_call_rpc);
|
|
|
|
static int imx_scu_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct imx_sc_ipc *sc_ipc;
|
|
struct imx_sc_chan *sc_chan;
|
|
struct mbox_client *cl;
|
|
char *chan_name;
|
|
struct of_phandle_args args;
|
|
int num_channel;
|
|
int ret;
|
|
int i;
|
|
|
|
sc_ipc = devm_kzalloc(dev, sizeof(*sc_ipc), GFP_KERNEL);
|
|
if (!sc_ipc)
|
|
return -ENOMEM;
|
|
|
|
ret = of_parse_phandle_with_args(pdev->dev.of_node, "mboxes",
|
|
"#mbox-cells", 0, &args);
|
|
if (ret)
|
|
return ret;
|
|
|
|
sc_ipc->fast_ipc = of_device_is_compatible(args.np, "fsl,imx8-mu-scu");
|
|
|
|
num_channel = sc_ipc->fast_ipc ? 2 : SCU_MU_CHAN_NUM;
|
|
for (i = 0; i < num_channel; i++) {
|
|
if (i < num_channel / 2)
|
|
chan_name = kasprintf(GFP_KERNEL, "tx%d", i);
|
|
else
|
|
chan_name = kasprintf(GFP_KERNEL, "rx%d",
|
|
i - num_channel / 2);
|
|
|
|
if (!chan_name)
|
|
return -ENOMEM;
|
|
|
|
sc_chan = &sc_ipc->chans[i];
|
|
cl = &sc_chan->cl;
|
|
cl->dev = dev;
|
|
cl->tx_block = false;
|
|
cl->knows_txdone = true;
|
|
cl->rx_callback = imx_scu_rx_callback;
|
|
|
|
if (!sc_ipc->fast_ipc) {
|
|
/* Initial tx_done completion as "done" */
|
|
cl->tx_done = imx_scu_tx_done;
|
|
init_completion(&sc_chan->tx_done);
|
|
complete(&sc_chan->tx_done);
|
|
}
|
|
|
|
sc_chan->sc_ipc = sc_ipc;
|
|
sc_chan->idx = i % (num_channel / 2);
|
|
sc_chan->ch = mbox_request_channel_byname(cl, chan_name);
|
|
if (IS_ERR(sc_chan->ch)) {
|
|
ret = PTR_ERR(sc_chan->ch);
|
|
if (ret != -EPROBE_DEFER)
|
|
dev_err(dev, "Failed to request mbox chan %s ret %d\n",
|
|
chan_name, ret);
|
|
kfree(chan_name);
|
|
return ret;
|
|
}
|
|
|
|
dev_dbg(dev, "request mbox chan %s\n", chan_name);
|
|
/* chan_name is not used anymore by framework */
|
|
kfree(chan_name);
|
|
}
|
|
|
|
sc_ipc->dev = dev;
|
|
mutex_init(&sc_ipc->lock);
|
|
init_completion(&sc_ipc->done);
|
|
|
|
imx_sc_ipc_handle = sc_ipc;
|
|
|
|
ret = imx_scu_soc_init(dev);
|
|
if (ret)
|
|
dev_warn(dev, "failed to initialize SoC info: %d\n", ret);
|
|
|
|
ret = imx_scu_enable_general_irq_channel(dev);
|
|
if (ret)
|
|
dev_warn(dev,
|
|
"failed to enable general irq channel: %d\n", ret);
|
|
|
|
dev_info(dev, "NXP i.MX SCU Initialized\n");
|
|
|
|
return devm_of_platform_populate(dev);
|
|
}
|
|
|
|
static const struct of_device_id imx_scu_match[] = {
|
|
{ .compatible = "fsl,imx-scu", },
|
|
{ /* Sentinel */ }
|
|
};
|
|
|
|
static struct platform_driver imx_scu_driver = {
|
|
.driver = {
|
|
.name = "imx-scu",
|
|
.of_match_table = imx_scu_match,
|
|
},
|
|
.probe = imx_scu_probe,
|
|
};
|
|
builtin_platform_driver(imx_scu_driver);
|
|
|
|
MODULE_AUTHOR("Dong Aisheng <aisheng.dong@nxp.com>");
|
|
MODULE_DESCRIPTION("IMX SCU firmware protocol driver");
|
|
MODULE_LICENSE("GPL v2");
|