forked from Minki/linux
dd3cb467eb
As indicated in link: https://lore.kernel.org/all/20220822204945.GA808626-robh@kernel.org/ DT schema files should not have 'Device Tree Binding' as part of there title: line. Remove this in most .yaml files, so hopefully preventing developers copying it into new .yaml files, and being asked to remove it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220825020427.3460650-1-andrew@lunn.ch Signed-off-by: Rob Herring <robh@kernel.org>
116 lines
2.6 KiB
YAML
116 lines
2.6 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
# Copyright (c) 2020 MediaTek
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/usb/mediatek,musb.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: MediaTek MUSB DRD/OTG Controller
|
|
|
|
maintainers:
|
|
- Min Guo <min.guo@mediatek.com>
|
|
|
|
properties:
|
|
$nodename:
|
|
pattern: '^usb@[0-9a-f]+$'
|
|
|
|
compatible:
|
|
items:
|
|
- enum:
|
|
- mediatek,mt8516-musb
|
|
- mediatek,mt2701-musb
|
|
- mediatek,mt7623-musb
|
|
- const: mediatek,mtk-musb
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
interrupt-names:
|
|
items:
|
|
- const: mc
|
|
|
|
clocks:
|
|
items:
|
|
- description: The main/core clock
|
|
- description: The system bus clock
|
|
- description: The 48Mhz clock
|
|
|
|
clock-names:
|
|
items:
|
|
- const: main
|
|
- const: mcu
|
|
- const: univpll
|
|
|
|
phys:
|
|
maxItems: 1
|
|
|
|
usb-role-switch:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description: Support role switch. See usb/generic.txt
|
|
type: boolean
|
|
|
|
dr_mode:
|
|
enum:
|
|
- host
|
|
- otg
|
|
- peripheral
|
|
|
|
power-domains:
|
|
description: A phandle to USB power domain node to control USB's MTCMOS
|
|
maxItems: 1
|
|
|
|
connector:
|
|
$ref: /schemas/connector/usb-connector.yaml#
|
|
description: Connector for dual role switch
|
|
type: object
|
|
|
|
dependencies:
|
|
usb-role-switch: [ 'connector' ]
|
|
connector: [ 'usb-role-switch' ]
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
- interrupt-names
|
|
- phys
|
|
- clocks
|
|
- clock-names
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/clock/mt2701-clk.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/phy/phy.h>
|
|
#include <dt-bindings/power/mt2701-power.h>
|
|
|
|
usb@11200000 {
|
|
compatible = "mediatek,mt2701-musb", "mediatek,mtk-musb";
|
|
reg = <0x11200000 0x1000>;
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
|
|
interrupt-names = "mc";
|
|
phys = <&u2port2 PHY_TYPE_USB2>;
|
|
dr_mode = "otg";
|
|
clocks = <&pericfg CLK_PERI_USB0>,
|
|
<&pericfg CLK_PERI_USB0_MCU>,
|
|
<&pericfg CLK_PERI_USB_SLV>;
|
|
clock-names = "main","mcu","univpll";
|
|
power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
|
|
usb-role-switch;
|
|
|
|
connector {
|
|
compatible = "gpio-usb-b-connector", "usb-b-connector";
|
|
type = "micro";
|
|
id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
|
|
vbus-supply = <&usb_vbus>;
|
|
};
|
|
};
|
|
...
|