forked from Minki/linux
c4c5cd695f
cudeaurora.org is used in place of codeaurora.org in the contact field. Signed-off-by: Amit Kumar <free.amit.kumar@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
98 lines
3.4 KiB
Plaintext
98 lines
3.4 KiB
Plaintext
What: /sys/devices/platform/hidma-mgmt*/chanops/chan*/priority
|
|
/sys/devices/platform/QCOM8060:*/chanops/chan*/priority
|
|
Date: Nov 2015
|
|
KernelVersion: 4.4
|
|
Contact: "Sinan Kaya <okaya@codeaurora.org>"
|
|
Description:
|
|
Contains either 0 or 1 and indicates if the DMA channel is a
|
|
low priority (0) or high priority (1) channel.
|
|
|
|
What: /sys/devices/platform/hidma-mgmt*/chanops/chan*/weight
|
|
/sys/devices/platform/QCOM8060:*/chanops/chan*/weight
|
|
Date: Nov 2015
|
|
KernelVersion: 4.4
|
|
Contact: "Sinan Kaya <okaya@codeaurora.org>"
|
|
Description:
|
|
Contains 0..15 and indicates the weight of the channel among
|
|
equal priority channels during round robin scheduling.
|
|
|
|
What: /sys/devices/platform/hidma-mgmt*/chreset_timeout_cycles
|
|
/sys/devices/platform/QCOM8060:*/chreset_timeout_cycles
|
|
Date: Nov 2015
|
|
KernelVersion: 4.4
|
|
Contact: "Sinan Kaya <okaya@codeaurora.org>"
|
|
Description:
|
|
Contains the platform specific cycle value to wait after a
|
|
reset command is issued. If the value is chosen too short,
|
|
then the HW will issue a reset failure interrupt. The value
|
|
is platform specific and should not be changed without
|
|
consultance.
|
|
|
|
What: /sys/devices/platform/hidma-mgmt*/dma_channels
|
|
/sys/devices/platform/QCOM8060:*/dma_channels
|
|
Date: Nov 2015
|
|
KernelVersion: 4.4
|
|
Contact: "Sinan Kaya <okaya@codeaurora.org>"
|
|
Description:
|
|
Contains the number of dma channels supported by one instance
|
|
of HIDMA hardware. The value may change from chip to chip.
|
|
|
|
What: /sys/devices/platform/hidma-mgmt*/hw_version_major
|
|
/sys/devices/platform/QCOM8060:*/hw_version_major
|
|
Date: Nov 2015
|
|
KernelVersion: 4.4
|
|
Contact: "Sinan Kaya <okaya@codeaurora.org>"
|
|
Description:
|
|
Version number major for the hardware.
|
|
|
|
What: /sys/devices/platform/hidma-mgmt*/hw_version_minor
|
|
/sys/devices/platform/QCOM8060:*/hw_version_minor
|
|
Date: Nov 2015
|
|
KernelVersion: 4.4
|
|
Contact: "Sinan Kaya <okaya@codeaurora.org>"
|
|
Description:
|
|
Version number minor for the hardware.
|
|
|
|
What: /sys/devices/platform/hidma-mgmt*/max_rd_xactions
|
|
/sys/devices/platform/QCOM8060:*/max_rd_xactions
|
|
Date: Nov 2015
|
|
KernelVersion: 4.4
|
|
Contact: "Sinan Kaya <okaya@codeaurora.org>"
|
|
Description:
|
|
Contains a value between 0 and 31. Maximum number of
|
|
read transactions that can be issued back to back.
|
|
Choosing a higher number gives better performance but
|
|
can also cause performance reduction to other peripherals
|
|
sharing the same bus.
|
|
|
|
What: /sys/devices/platform/hidma-mgmt*/max_read_request
|
|
/sys/devices/platform/QCOM8060:*/max_read_request
|
|
Date: Nov 2015
|
|
KernelVersion: 4.4
|
|
Contact: "Sinan Kaya <okaya@codeaurora.org>"
|
|
Description:
|
|
Size of each read request. The value needs to be a power
|
|
of two and can be between 128 and 1024.
|
|
|
|
What: /sys/devices/platform/hidma-mgmt*/max_wr_xactions
|
|
/sys/devices/platform/QCOM8060:*/max_wr_xactions
|
|
Date: Nov 2015
|
|
KernelVersion: 4.4
|
|
Contact: "Sinan Kaya <okaya@codeaurora.org>"
|
|
Description:
|
|
Contains a value between 0 and 31. Maximum number of
|
|
write transactions that can be issued back to back.
|
|
Choosing a higher number gives better performance but
|
|
can also cause performance reduction to other peripherals
|
|
sharing the same bus.
|
|
|
|
|
|
What: /sys/devices/platform/hidma-mgmt*/max_write_request
|
|
/sys/devices/platform/QCOM8060:*/max_write_request
|
|
Date: Nov 2015
|
|
KernelVersion: 4.4
|
|
Contact: "Sinan Kaya <okaya@codeaurora.org>"
|
|
Description:
|
|
Size of each write request. The value needs to be a power
|
|
of two and can be between 128 and 1024.
|