/* * Copyright (C) 2008-2009 ST-Ericsson * * Author: Srinidhi KASAGAR * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2, as * published by the Free Software Foundation. * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "devices-db8500.h" #include "pins-db8500.h" #include "board-mop500.h" static pin_cfg_t mop500_pins[] = { /* SSP0 */ GPIO143_SSP0_CLK, GPIO144_SSP0_FRM, GPIO145_SSP0_RXD, GPIO146_SSP0_TXD, /* I2C */ GPIO147_I2C0_SCL, GPIO148_I2C0_SDA, GPIO16_I2C1_SCL, GPIO17_I2C1_SDA, GPIO10_I2C2_SDA, GPIO11_I2C2_SCL, GPIO229_I2C3_SDA, GPIO230_I2C3_SCL, /* SKE keypad */ GPIO153_KP_I7, GPIO154_KP_I6, GPIO155_KP_I5, GPIO156_KP_I4, GPIO157_KP_O7, GPIO158_KP_O6, GPIO159_KP_O5, GPIO160_KP_O4, GPIO161_KP_I3, GPIO162_KP_I2, GPIO163_KP_I1, GPIO164_KP_I0, GPIO165_KP_O3, GPIO166_KP_O2, GPIO167_KP_O1, GPIO168_KP_O0, GPIO217_GPIO, /* GPIO_EXP_INT */ }; static struct ab8500_platform_data ab8500_platdata = { .irq_base = MOP500_AB8500_IRQ_BASE, }; static struct resource ab8500_resources[] = { [0] = { .start = IRQ_DB8500_AB8500, .end = IRQ_DB8500_AB8500, .flags = IORESOURCE_IRQ } }; struct platform_device ab8500_device = { .name = "ab8500-i2c", .id = 0, .dev = { .platform_data = &ab8500_platdata, }, .num_resources = 1, .resource = ab8500_resources, }; static struct pl022_ssp_controller ssp0_platform_data = { .bus_id = 0, /* pl022 not yet supports dma */ .enable_dma = 0, /* on this platform, gpio 31,142,144,214 & * 224 are connected as chip selects */ .num_chipselect = 5, }; /* * TC35892 */ static void mop500_tc35892_init(struct tc35892 *tc35892, unsigned int base) { mop500_sdi_tc35892_init(); } static struct tc35892_gpio_platform_data mop500_tc35892_gpio_data = { .gpio_base = MOP500_EGPIO(0), .setup = mop500_tc35892_init, }; static struct tc35892_platform_data mop500_tc35892_data = { .gpio = &mop500_tc35892_gpio_data, .irq_base = MOP500_EGPIO_IRQ_BASE, }; static struct i2c_board_info mop500_i2c0_devices[] = { { I2C_BOARD_INFO("tc35892", 0x42), .irq = NOMADIK_GPIO_TO_IRQ(217), .platform_data = &mop500_tc35892_data, }, }; #define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \ static struct nmk_i2c_controller u8500_i2c##id##_data = { \ /* \ * slave data setup time, which is \ * 250 ns,100ns,10ns which is 14,6,2 \ * respectively for a 48 Mhz \ * i2c clock \ */ \ .slsu = _slsu, \ /* Tx FIFO threshold */ \ .tft = _tft, \ /* Rx FIFO threshold */ \ .rft = _rft, \ /* std. mode operation */ \ .clk_freq = clk, \ .sm = _sm, \ } /* * The board uses 4 i2c controllers, initialize all of * them with slave data setup time of 250 ns, * Tx & Rx FIFO threshold values as 1 and standard * mode of operation */ U8500_I2C_CONTROLLER(0, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD); U8500_I2C_CONTROLLER(1, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD); U8500_I2C_CONTROLLER(2, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD); U8500_I2C_CONTROLLER(3, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD); static void __init mop500_i2c_init(void) { db8500_add_i2c0(&u8500_i2c0_data); db8500_add_i2c1(&u8500_i2c1_data); db8500_add_i2c2(&u8500_i2c2_data); db8500_add_i2c3(&u8500_i2c3_data); } static const unsigned int ux500_keymap[] = { KEY(2, 5, KEY_END), KEY(4, 1, KEY_POWER), KEY(3, 5, KEY_VOLUMEDOWN), KEY(1, 3, KEY_3), KEY(5, 2, KEY_RIGHT), KEY(5, 0, KEY_9), KEY(0, 5, KEY_MENU), KEY(7, 6, KEY_ENTER), KEY(4, 5, KEY_0), KEY(6, 7, KEY_2), KEY(3, 4, KEY_UP), KEY(3, 3, KEY_DOWN), KEY(6, 4, KEY_SEND), KEY(6, 2, KEY_BACK), KEY(4, 2, KEY_VOLUMEUP), KEY(5, 5, KEY_1), KEY(4, 3, KEY_LEFT), KEY(3, 2, KEY_7), }; static const struct matrix_keymap_data ux500_keymap_data = { .keymap = ux500_keymap, .keymap_size = ARRAY_SIZE(ux500_keymap), }; /* * Nomadik SKE keypad */ #define ROW_PIN_I0 164 #define ROW_PIN_I1 163 #define ROW_PIN_I2 162 #define ROW_PIN_I3 161 #define ROW_PIN_I4 156 #define ROW_PIN_I5 155 #define ROW_PIN_I6 154 #define ROW_PIN_I7 153 #define COL_PIN_O0 168 #define COL_PIN_O1 167 #define COL_PIN_O2 166 #define COL_PIN_O3 165 #define COL_PIN_O4 160 #define COL_PIN_O5 159 #define COL_PIN_O6 158 #define COL_PIN_O7 157 #define SKE_KPD_MAX_ROWS 8 #define SKE_KPD_MAX_COLS 8 static int ske_kp_rows[] = { ROW_PIN_I0, ROW_PIN_I1, ROW_PIN_I2, ROW_PIN_I3, ROW_PIN_I4, ROW_PIN_I5, ROW_PIN_I6, ROW_PIN_I7, }; /* * ske_set_gpio_row: request and set gpio rows */ static int ske_set_gpio_row(int gpio) { int ret; ret = gpio_request(gpio, "ske-kp"); if (ret < 0) { pr_err("ske_set_gpio_row: gpio request failed\n"); return ret; } ret = gpio_direction_output(gpio, 1); if (ret < 0) { pr_err("ske_set_gpio_row: gpio direction failed\n"); gpio_free(gpio); } return ret; } /* * ske_kp_init - enable the gpio configuration */ static int ske_kp_init(void) { int ret, i; for (i = 0; i < SKE_KPD_MAX_ROWS; i++) { ret = ske_set_gpio_row(ske_kp_rows[i]); if (ret < 0) { pr_err("ske_kp_init: failed init\n"); return ret; } } return 0; } static struct ske_keypad_platform_data ske_keypad_board = { .init = ske_kp_init, .keymap_data = &ux500_keymap_data, .no_autorepeat = true, .krow = SKE_KPD_MAX_ROWS, /* 8x8 matrix */ .kcol = SKE_KPD_MAX_COLS, .debounce_ms = 40, /* in millsecs */ }; /* add any platform devices here - TODO */ static struct platform_device *platform_devs[] __initdata = { &ux500_ske_keypad_device, }; static void __init mop500_spi_init(void) { db8500_add_ssp0(&ssp0_platform_data); } static void __init mop500_uart_init(void) { db8500_add_uart0(); db8500_add_uart1(); db8500_add_uart2(); } static void __init u8500_init_machine(void) { u8500_init_devices(); nmk_config_pins(mop500_pins, ARRAY_SIZE(mop500_pins)); ux500_ske_keypad_device.dev.platform_data = &ske_keypad_board; platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); mop500_i2c_init(); mop500_sdi_init(); mop500_spi_init(); mop500_uart_init(); platform_device_register(&ab8500_device); i2c_register_board_info(0, mop500_i2c0_devices, ARRAY_SIZE(mop500_i2c0_devices)); } MACHINE_START(U8500, "ST-Ericsson MOP500 platform") /* Maintainer: Srinidhi Kasagar */ .boot_params = 0x100, .map_io = u8500_map_io, .init_irq = ux500_init_irq, /* we re-use nomadik timer here */ .timer = &ux500_timer, .init_machine = u8500_init_machine, MACHINE_END